Hilitand 70mm Extruded Aluminum CPU Cooler Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This hilitand 12v CPU cooling fan review focuses on a compact cooling solution designed for smaller form factor builds. The Hilitand 70mm Extruded Aluminum CPU Cooler uses a 70mm fan to move air across an aluminum heatsink. It operates at 2200RPM and draws just 2.8W of power. The unit measures 4.21 inches in length and weighs only 0.35 ounces. It supports AM2, AM3, AM3+, FM1, FM2, and FM2+ sockets. This spec-based look explains what the listing offers for your system.
What stands out
- 70mm fan size for compact cases
- 2200RPM fan speed for consistent airflow
- Extruded aluminum heatsink material
- 2.8W power consumption
- Support for AM2 through FM2+ sockets
Who it fits
Good fit for
You should consider this cooler if you are building in a small ITX case or need a lightweight solution for older AMD platforms. The 70mm fan fits into tight spaces where larger coolers will not. Its low weight and small footprint make it ideal for setups with minimal clearance. It works well for CPUs that do not generate excessive heat, providing basic cooling without taking up much room in your chassis.
Who should skip it
Skip this option if you need high performance for overclocked processors or modern high-end CPUs. The 70mm fan size limits the total air volume you can move. It lacks heat pipes or a large surface area for efficient thermal transfer. If your system runs hot, this small extruded aluminum block will not dissipate enough heat. You will need a larger tower cooler or an AIO for demanding workloads.
Verdict: This is a basic, low-profile cooler for light duty tasks. It suits small builds with older AMD sockets that do not require heavy cooling.
Key specs explained
Fan Speed: 2200RPM
This value indicates how fast the fan blades rotate each minute. Higher speeds generally move more air, which helps cool the processor under load. You should check if this speed meets your thermal needs. Faster fans may produce more noise, so consider your acoustic preferences. Compare this against other small fans to ensure adequate airflow for your specific CPU model and case environment.
Socket Compatibility: AM2, AM3, AM3+, FM1, FM2, FM2+
This list defines which processor mounting holes the cooler fits. You must verify your motherboard socket matches one of these options before purchasing. It supports older AMD platforms, so it is not universal for all modern CPUs. Check your motherboard manual to confirm the exact socket type. This ensures the mounting hardware aligns correctly with your board for a secure and stable installation.
Material: Aluminum
Aluminum is a lightweight metal that conducts heat well. It allows the heatsink to absorb heat from the CPU and dissipate it into the airflow. This material is common in budget and compact coolers. It is lighter than copper, which helps keep the overall weight down. When shopping, compare aluminum heatsinks with copper alternatives to understand the trade-offs between weight, cost, and thermal efficiency.
Weight: 0.35 ounces
This low weight indicates a very light component. It places minimal stress on your motherboard and CPU socket. This is particularly important for small form factor cases or fragile mounting brackets. A lighter cooler is easier to handle during installation. Compare this weight with larger tower coolers to see the difference in mounting requirements and potential sagging risks on your motherboard.
Design and build overview
The listing describes the heatsink as extruded aluminum. This manufacturing method typically creates a single piece of metal with fins. Aluminum conducts heat well and keeps the overall weight low. The unit weighs only 0.35 ounces. This light mass makes it suitable for small form factor cases where heavy coolers might stress the motherboard.
According to the listing, the physical dimensions are 4.21 inches in length, 2.76 inches in width, and 1.57 inches in height. These compact measurements allow the cooler to fit into tight spaces. You should verify that your case has enough clearance around the CPU socket. The small footprint also helps avoid interference with nearby RAM sticks or PCIe slots.
The design includes a 70mm fan mounted directly to the aluminum block. The fan is described as hydraulic bearing type, which often reduces vibration. The listing notes the color is default. This usually means a standard black or gray finish. The simple construction suggests easy installation. You can likely mount it yourself without complex brackets. The straightforward layout focuses on basic cooling for specific AM2, AM3, FM1, FM2, and FM2+ sockets.
Installation and daily operation
The listing states that installation is convenient for you to perform yourself. You will need to verify that your motherboard socket matches one of the supported options. The compatible sockets include AM2, AM3, AM3+, FM1, FM2, and FM2+. This range covers several older AMD platforms. You should confirm your specific socket type before proceeding with the mount.
The physical dimensions are 4.21 inches in length, 2.76 inches in width, and 1.57 inches in height. These small measurements suggest this cooler is intended for compact cases or specific small form factor builds. The total weight is 0.35 ounces. This light mass reduces stress on the motherboard mounting points.
During daily use, the fan rotates at 2200 RPM. This speed moves air across the extruded aluminum fins to dissipate heat. The unit draws 2.8 watts of power. The listing describes the bearing type as hydraulic. It also claims the operation is silent with no noise. You should consider that 2200 RPM fans typically produce some audible air movement, even if the bearing is smooth. The small 70mm fan size generates a focused airflow. This setup relies on direct contact with the CPU surface for heat transfer. You will need to ensure adequate case airflow to exhaust the warm air moved by this cooler. The design prioritizes low power consumption and small footprint over high thermal capacity.
Before You Buy This Cooler
You should verify your motherboard socket matches the listed options before purchasing. This cooler supports AM2, AM3, AM3+, FM1, FM2, and FM2+. Ensure your case has space for a 70mm fan. The low weight means it places minimal stress on the board. You may need additional fans for case airflow if this is your only exhaust. Regularly wipe dust from the fins to maintain performance. This unit fits well alongside larger air coolers in your build if space is tight. It does not replace high-end cooling for overclocked processors. Keep it away from moving parts. Check cable routing for the 12V power connector. This guide helps you compare it with other CPU air coolers and thermal paste options to find the best balance for your specific hardware needs.
Check before you buy
- Verify your motherboard socket is AM2, AM3, AM3+, FM1, FM2, or FM2+
- Check case dimensions for a 70mm fan clearance
- Ensure you have a 12V power connector available
- Confirm the cooler fits with your RAM height
The product at a glance
Hilitand 70mm Extruded Aluminum CPU Cooler
Best for: basic cooling on older AMD sockets
- Socket Compatibility
- AM2, AM3, AM3+, FM1, FM2, FM2+
- Fan Speed
- 2200RPM
- Material
- Aluminum
- Features
- Fan
- Dimensions
- 4.21 × 2.76 × 1.57 inches
- Weight
- 0.35 ounces
View on Amazon: Hilitand 70mm Extruded Aluminum CPU Cooler Affiliate link
This Hilitand cooler uses a 70mm extruded aluminum heatsink with a 12V fan. It runs at 2200 RPM and draws 2.8W. The unit weighs just 0.35 ounces and fits AM2, AM3, AM3+, FM1, FM2, and FM2+ sockets. You get a small, lightweight solution for basic cooling needs. It is designed for simple installation and quiet operation.
Pros
- 70mm extruded aluminum heatsink for heat dissipation
- 2200 RPM fan speed for air movement
- Low 2.8W power consumption
- Compatible with AM2, AM3, AM3+, FM1, FM2, FM2+ sockets
- Lightweight 0.35 ounce build
Cons
- 70mm fan size limits maximum airflow
- No mention of PWM control for variable speeds
- Limited socket support excludes modern Intel and AMD platforms
Good fit if
- You need a replacement fan for older AM2 or FM1 sockets
- You require a very small and lightweight cooler
- You want a simple 12V direct-drive solution
Skip if
- You use modern LGA or AM5 sockets
- You need high airflow for overclocking
- You want PWM fan control
Verdict: Hilitand 70mm Aluminum CPU Cooler is a basic, lightweight option for older AMD and FM sockets. It fits users who need a simple, small replacement fan rather than high-performance cooling.
Specifications side by side
| Spec | Hilitand 70mm Extruded Aluminum CPU Cooler |
|---|---|
| Socket Compatibility | AM2, AM3, AM3+, FM1, FM2, FM2+ |
| Fan Speed | 2200RPM |
| Material | Aluminum |
| Features | Fan |
| Dimensions | 4.21 × 2.76 × 1.57 inches |
| Weight | 0.35 ounces |
| Color | default |
| Model | Hilitando0a79t1vmp |
Frequently asked questions
Is this cooler suitable for modern high-end processors?
No. This unit is designed for basic cooling on older AMD sockets. It fits users who need a simple replacement fan rather than high-performance cooling. Modern high-TDP CPUs require larger heatsinks and more airflow than this 70mm fan can provide. You should use this only for low-power legacy systems.
What is the weight of the Hilitand CPU cooler?
The cooler weighs 0.35 ounces. This light mass places minimal stress on the motherboard. It is easy to handle during installation. The low weight is due to the extruded aluminum construction. This makes it a safe option for older boards that may not support heavy coolers.
How large are the dimensions of this heatsink?
The unit measures 4.21 inches in length, 2.76 inches in width, and 1.57 inches in height. These compact dimensions allow it to fit in small form factor cases. You should verify that your case has adequate clearance for a 70mm fan size before purchasing. It is not designed for full-sized ATX cases.
Does this cooler include a fan or is it passive?
Yes, it includes a fan. The listing describes the features as including a fan component. It operates at 2200 RPM to move air across the aluminum fins. Passive cooling relies on natural convection, which this unit does not use. The active fan is necessary for its intended basic cooling performance.
What material is the heatsink made from?
The heatsink is made from extruded aluminum. This manufacturing method creates a single piece of metal with fins. Aluminum conducts heat well while keeping the overall weight low. The material is durable but does not offer the thermal capacity of copper. It is suitable for the low heat output of older processors.
Can I install this on an Intel motherboard?
No, this cooler supports only specific AMD sockets. The compatible options are AM2, AM3, AM3+, FM1, FM2, and FM2+. It does not list Intel socket compatibility. You must verify your motherboard socket matches one of these options before purchasing. It is not a universal solution for all desktop platforms.