GeeekPi 18-Piece Pure Copper Heatsink Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This geeekpi 18pcs pure copper heatsinks review focuses on a passive cooling set for single-board computers. The product includes eighteen individual heatsinks designed to attach directly to components. The defining specs are its pure copper construction and thermal conductive adhesive tape mounting. These elements work together to pull heat away from the processor and other chips. You get a complete set rather than a single unit. The listing notes that the Raspberry Pi board itself is not included. This is a straightforward accessory for managing thermal output without fans or complex installation hardware.
What stands out
- Made from pure copper for strong thermal conductivity
- Includes 18 heatsinks for comprehensive component coverage
- Mounts using thermal conductive adhesive tape
- Compatible with Raspberry Pi 5 and 4B models
- Lightweight at 2.47 ounces
Who it fits
Good fit for
You should consider this set if you own a Raspberry Pi 5 or Pi 4B and want passive cooling. It suits users who prefer silent operation over active fans. The adhesive tape makes installation simple for those who do not want to drill holes or use screws. If you need to cool multiple chips on the board, the eighteen-piece count covers most common components. It is a practical choice for hobbyists building low-noise media centers or small servers.
Who should skip it
Skip this option if you need active cooling for high-performance workloads. Passive copper heatsinks have limited heat dissipation compared to fan-based solutions. You should look elsewhere if you require a mounting method other than adhesive tape. This product does not include the Raspberry Pi board itself. Users who need a single large heatsink for a specific high-heat component may find the small individual units insufficient for their specific thermal needs.
Verdict: This is a practical passive cooling solution for Raspberry Pi users who value simplicity and silence. The pure copper material and adhesive mounting provide a straightforward way to manage heat on compatible boards.
Key specs explained
Material: Pure Copper
This heatsink uses solid copper rather than aluminum. Copper conducts heat more efficiently, allowing it to pull warmth away from the Raspberry Pi processor faster. This material choice is standard for high-performance passive cooling. If you compare this to aluminum options, the copper version offers better thermal transfer for the same size. It is ideal for users who prioritize maximum heat dissipation without active fans.
Mounting Type: Thermal Conductive Adhesive Tape
The unit attaches directly to components using sticky tape instead of screws or clips. This method simplifies installation on small boards like the Raspberry Pi 4B or 5. You simply peel and press. This approach saves space and avoids drilling holes. It is distinct from traditional air cooler mounts that require complex brackets. This mounting style suits compact builds where mechanical fasteners are impractical or unavailable.
Compatible Device: Raspberry Pi 5/4B
These heatsinks are sized specifically for the Raspberry Pi 5 and Raspberry Pi 4 Model B. They cover the main system-on-chip and likely other hot components. This compatibility ensures a snug fit for these specific single-board computers. It does not fit standard desktop CPUs or other SBCs. Buyers should verify their board model before purchase. This targeted design ensures optimal coverage for the intended devices.
Weight: 2.47 ounces
The entire 18-piece set weighs just 2.47 ounces. This light weight means it adds minimal mass to your Raspberry Pi project. It is easy to handle during installation. The low weight also reduces stress on the board components. When compared to heavy metal blocks, this set is negligible in terms of added load. It is suitable for delicate electronics where extra weight could cause strain or stability issues.
Design and build details
According to the listing, this set uses pure copper for all eighteen heatsinks. Copper offers higher thermal conductivity than aluminum, which helps draw heat away from the Raspberry Pi components more effectively. The mounting method relies entirely on thermal conductive adhesive tape. You must peel off the protective layer before application. This adhesive approach simplifies installation on small single-board computers where traditional screw mounts are difficult to implement. The design is purely passive, with no fans or moving parts involved in the cooling process.
The package weighs 2.47 ounces, which is lightweight for an eighteen-piece set. The model number F-0029 identifies this specific configuration. The heatsinks are sized to fit the Raspberry Pi 5 and the Raspberry Pi 4 Model B. You should verify that the dimensions match your specific board layout before installation. The adhesive tape ensures a direct thermal connection between the heatsink and the chip surface. This contact is critical for performance.
The finish is standard for raw copper heatsinks. There are no painted coatings or anodized layers mentioned in the specifications. This means the metal surface remains exposed to air. You may notice natural oxidation over time, which does not significantly impact thermal performance. The layout includes multiple sizes to cover various chips on the board. Each heatsink is designed to sit flat against the component. The adhesive tape provides the only structural hold. Ensure the surface is clean and dry for optimal adhesion.
Setup and everyday use
Setting up this cooler requires careful preparation of the Raspberry Pi 5 or 4B board. The mounting method relies on thermal conductive adhesive tape. You must ensure the target components are clean and dry before application. The listing explicitly instructs you to tear off the protective layer from the thermal tape before sticking the heatsinks. This step is critical for establishing a proper thermal path. If you skip this, the heat transfer will be ineffective.
The package contains eighteen individual heatsinks. You will need to identify which components on your Raspberry Pi board require cooling. Common targets include the main processor, RAM chips, and power management ICs. Each heatsink attaches directly to its specific component. There is no fan or active cooling mechanism involved. The system depends entirely on passive heat dissipation through the pure copper material.
In everyday use, the setup remains static once installed. The 2.47-ounce weight of the set is negligible for most enclosures. You do not need to connect any cables or adjust settings. The product works solely by absorbing heat from the silicon and releasing it into the surrounding air. Note that the Raspberry Pi board itself is not included. You must provide your own single-board computer. This solution is best for users who want a simple, maintenance-free cooling option for their SBC without adding moving parts or complexity to their project.
Before You Buy This Set
You need to verify your Raspberry Pi model. This set works with the Pi 5 and Pi 4B. The listing notes the board is not included. You must buy the single-board computer separately. Check your board version before ordering. The mounting uses thermal conductive adhesive tape. You should have cleaning supplies ready. Isopropyl alcohol helps remove old residue. Ensure the surface is smooth. Dust can block heat transfer. Wipe the heatsinks regularly. This passive cooler fits your setup if you lack airflow. It sits alongside active CPU air coolers in our guide. Use it for silent builds. Active fans offer more cooling power. Thermal paste is not needed here. The tape provides the bond. Consider your noise tolerance. This option suits quiet environments. It lacks the performance of large air coolers. Choose it for compact, silent Raspberry Pi projects. Read the other reviews to compare active options. This set is a specific solution for passive needs.
Check before you buy
- Confirm you have a Raspberry Pi 5 or 4B board
- Ensure the target components are clean and dry
- Verify you do not need active fan cooling
- Check that you have isopropyl alcohol for prep
The product at a glance
GeeekPi 18-Piece Pure Copper Heatsink Set
Best for: Raspberry Pi 5 and 4B passive cooling
- Material
- Pure Copper
- Compatible Device
- Raspberry Pi 5/4B
- Mounting Type
- Thermal Conductive Adhesive Tape
- Weight
- 2.47 ounces
View on Amazon: GeeekPi 18-Piece Pure Copper Heatsink Set Affiliate link
This is an 18-piece set of pure copper heatsinks designed for Raspberry Pi 5 and 4B boards. The set includes thermal conductive adhesive tape for mounting. Copper offers strong thermal conductivity and heat dissipation. The total weight is 2.47 ounces. You get a straightforward passive cooling solution. It suits users who need simple, reliable heat management for their single-board computers without complex installation.
Pros
- Constructed from pure copper for effective heat dissipation
- Includes thermal conductive adhesive tape for easy mounting
- Compatible with both Raspberry Pi 5 and 4B models
- Lightweight design at 2.47 ounces total
Cons
- Passive cooling only, no fan included for active airflow
- Adhesive tape requires careful surface preparation before application
- Does not include the Raspberry Pi board itself
Good fit if
- You own a Raspberry Pi 5 or 4B
- You need a simple passive cooling upgrade
- You prefer pure copper heat dissipation
Skip if
- You require active cooling with a fan
- You are using a device other than a Raspberry Pi
- You want a mounting solution that does not use adhesive
Verdict: GeeekPi 18-Piece Copper Heatsink is a solid passive cooling option for Raspberry Pi 5 and 4B users who need reliable heat dissipation without moving parts.
Specifications side by side
| Spec | GeeekPi 18-Piece Pure Copper Heatsink Set |
|---|---|
| Material | Pure Copper |
| Compatible Device | Raspberry Pi 5/4B |
| Mounting Type | Thermal Conductive Adhesive Tape |
| Features | Thermal Tape |
| Weight | 2.47 ounces |
| Model | F-0029 |
Frequently asked questions
Does this heatsink set include a fan for active cooling?
No, this is a passive cooling solution. The product description identifies it as a set for passive cooling without moving parts. It relies entirely on the thermal conductivity of the pure copper material to dissipate heat. You do not need to connect any power cables or manage fan noise with this design.
What is the total weight of the 18-piece set?
The total weight is 2.47 ounces. This figure applies to the entire set of eighteen heatsinks. The light weight makes it easy to handle during installation on your Raspberry Pi board. It does not add significant bulk to your setup.
How do I attach these heatsinks to the Raspberry Pi?
You use the included thermal conductive adhesive tape. The listing specifies thermal tape as a key feature for mounting. You must clean the target components on your board before applying the tape and pressing the heatsink into place. No screws or clips are mentioned.
Is the material aluminum or copper?
The heatsinks are made of pure copper. The specifications explicitly state the material is copper. This choice allows for more efficient heat transfer compared to aluminum. It helps pull warmth away from the Raspberry Pi processor faster for better thermal performance.
Can I use this set with a Raspberry Pi 3?
The data specifies compatibility with the Raspberry Pi 5 and 4B. The product is best for these models. You should verify your board version before ordering. The listing does not confirm support for older models like the Pi 3, so you should stick to the recommended devices.
Does the package include the Raspberry Pi board itself?
No, the board is not included. You must buy the single-board computer separately. The listing notes that this is just a cooling accessory. Ensure you have the correct Pi 5 or 4B board before installing these copper heatsinks.