Looking Beyond the GeeekPi 18-Piece Pure Copper Heatsink? 6 Alternatives Worth a Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You might be looking for geeekpi 18pcs pure copper heatsinks alternatives if you need a different configuration or brand. The original GeeekPi set offers pure copper construction with adhesive tape for Raspberry Pi 5 and 4B models. It provides comprehensive coverage for multiple components. This makes it a strong choice for passive cooling on these specific boards. The pure copper material ensures efficient heat dissipation without the need for fans.
However, you may want a different size, material mix, or component focus. Some users prefer aluminum options for lighter weight. Others need smaller shims for tight spaces or specialized VRM cooling. The alternatives listed here were chosen because their specifications overlap with the original product. They share key traits like copper material and adhesive mounting. This list helps you compare specs directly. You can find a solution that fits your exact board layout or thermal requirements.
Our top pick: GeeekPi 18-Piece Pure Copper Heatsink Set.
How alternatives compare to GeeekPi
Easycargo 20-Piece Copper and Aluminum Heatsink Kit
The Easycargo 20-Piece Kit mixes copper and aluminum materials, whereas the GeeekPi set uses pure copper throughout. You get more pieces in this kit, covering a wider range of chip sizes on the board. The total weight is significantly lower at 0.64 ounces compared to 2.47 ounces. This makes installation easier if you are concerned about board stress. You should choose this option if you want a budget-friendly solution for general component cooling rather than maximum thermal density. The mixed materials offer adequate dissipation for low-power chips, but pure copper remains superior for sustained heat loads.
Haojiaho Raspberry Pi 4B Pure Copper Heatsink
The Haojiaho heatsink is designed specifically for the Raspberry Pi 4B, while the GeeekPi set supports both the 4B and the newer Pi 5. This Haojiaho unit is lighter, weighing only 0.71 ounces, compared to the 2.47 ounces of the full GeeekPi kit. It offers a focused solution for Pi 4B owners who do not need coverage for additional components. You might pick this if you want a simple, single-purpose cooler for the main processor. The pure copper construction matches the thermal performance of the GeeekPi for that specific chip, but you lose the comprehensive multi-component coverage provided by the larger set.
Easycargo 15x15x0.5mm Copper Shims 20-Pack
The Easycargo 15mm Copper Shims are intended for laptop GPUs and CPUs, not Raspberry Pi boards. These are small 15x15x0.5mm pads, quite different from the larger heatsink blocks in the GeeekPi set. You should select this if you are cooling compact electronic components in a laptop environment. The GeeekPi kit is built for the specific layout and heat output of Raspberry Pi processors. These shims offer passive cooling for different hardware entirely. If you are working on a Pi project, this kit is not a direct alternative. It serves a different market segment with smaller, adhesive-backed copper pads for tight spaces.
Easycargo 9mm Copper VRM Heatsinks
The Easycargo 9mm VRM Heatsinks target small power components like MOSFETs, not the main CPU. These are 9x9x4mm units, much smaller than the heatsinks included in the GeeekPi 18-piece set. You would use this kit to cool voltage regulator modules in compact builds. The GeeekPi set covers the primary processor and other board chips. This Easycargo option is specialized for low-to-moderate heat sources in tight spaces. It does not replace the main cooling solution for the Raspberry Pi processor. Choose this if you need additional cooling for power components alongside other heatsinks, rather than a complete board cooling kit.
Easycargo 40mm Copper Heatsink 2-Pack
The Easycargo 40mm Copper Heatsinks are designed for 3D printers and NEMA 17 motors. These are 40x40x4mm blocks, significantly larger than the Raspberry Pi heatsinks in the GeeekPi set. You should pick this if you need to manage heat in 3D printer components. The GeeekPi kit is optimized for the low-profile and specific thermal needs of Raspberry Pi boards. These larger heatsinks do not fit the Pi's layout or cooling requirements. This product serves a different application entirely. If you are cooling a Raspberry Pi, this kit is not suitable. It is a passive cooling solution for industrial or hobbyist electronics outside the Pi ecosystem.
Easycargo SODIMM Copper Memory Heatsink
The Easycargo SODIMM Heatsink is made for laptop memory modules, not Raspberry Pi processors. It measures 0.91 by 2.48 inches, designed to fit SODIMM slots in notebooks. The GeeekPi set provides heatsinks for various chips on a Pi board. You would choose this Easycargo product for passive cooling of notebook RAM. It does not fit Raspberry Pi boards or their component layout. This is a specialized solution for laptop upgrades. If you are looking for alternatives for your Pi project, this item is not relevant. It offers low-profile cooling for memory modules in portable computers, distinct from the general-purpose cooling of the GeeekPi kit.
Quick picks
Our 7 picks
GeeekPi 18-Piece Pure Copper Heatsink Set
Best for: Raspberry Pi 5 and 4B passive cooling
- Material
- Pure Copper
- Compatible Device
- Raspberry Pi 5/4B
- Mounting Type
- Thermal Conductive Adhesive Tape
- Weight
- 2.47 ounces
View on Amazon: GeeekPi 18-Piece Pure Copper Heatsink Set Affiliate link
This kit includes 18 pure copper heatsinks designed for Raspberry Pi 5 and 4B models. It uses thermal conductive adhesive tape for mounting, ensuring strong heat dissipation. The assembly weighs 2.47 ounces. You get a complete set of copper blocks to cover multiple components. It is a straightforward passive cooling solution for single-board computers. The material provides reliable thermal conductivity without complex installation steps.
Pros
- Made from pure copper for effective heat dissipation
- Includes 18 heatsinks for comprehensive component coverage
- Compatible with both Raspberry Pi 5 and 4B
- Uses pre-applied thermal conductive adhesive tape
Cons
- Requires manual removal of protective film before application
- Adhesive mounting limits repositioning flexibility
- Does not include the Raspberry Pi board itself
Good fit if
- You need a complete copper cooling set for Pi 5 or 4B
- You prefer passive cooling over active fans
- You want a material with high thermal conductivity
Skip if
- You require active fan cooling for higher TDPs
- You need a kit that includes the motherboard
- You prefer aluminum heatsinks for lower weight
Verdict: GeeekPi 18PCS Pure Copper Heatsink Kit offers a robust passive cooling solution for Raspberry Pi 5 and 4B users. It is best for builders who prioritize pure copper thermal performance and comprehensive component coverage.
Easycargo 20-Piece Copper and Aluminum Heatsink Kit
Best for: multi-component Raspberry Pi cooling
- Material
- Aluminum + Copper
- Compatible Device
- Raspberry Pi 5 4 3 boards
- Mounting Type
- Pre-applied adhesive tape backing
- Features
- Thermal Tape
- Dimensions
- 0.55 × 0.55 × 0.28 inches
- Weight
- 0.64 ounces
View on Amazon: Easycargo 20-Piece Copper and Aluminum Heatsink Kit Affiliate link
This kit includes 15 aluminum and 5 copper heatsinks for Raspberry Pi 5, 4, and 3 boards. Each unit has pre-applied thermal adhesive tape, so you do not need to apply paste separately. The mix of materials helps manage heat on various chips. The small size, measuring 0.55 by 0.28 inches, fits standard components. You get a broad range of sizes to cover different cooling needs.
Pros
- Includes 15 aluminum and 5 copper heatsinks
- Pre-applied thermal conductive adhesive tape
- Compatible with Raspberry Pi 5, 4, and 3
- Suitable for VRAM, VGA, RAM, and IC chips
Cons
- Smaller heatsink dimensions limit heat dissipation for high-power chips
- Adhesive mounting restricts removal and reuse
- No thermal paste included for non-adhesive applications
Good fit if
- You need a variety of sizes for different components
- You want to avoid messy thermal paste application
- You are cooling multiple chips on a Raspberry Pi board
Skip if
- You require high-performance cooling for overclocked processors
- You need to reuse heatsinks on different devices
- You prefer screw-mounting for better thermal contact
Verdict: Easycargo 20pcs Multi-Size Heatsink Kit is a convenient solution for users who need to cool multiple low-power chips on a Raspberry Pi without applying paste manually. It is ideal for general board cooling rather than intensive thermal management.
Haojiaho Raspberry Pi 4B Pure Copper Heatsink
Best for: Raspberry Pi 4B passive cooling
- Material
- Pure copper
- Compatible Device
- Raspberry Pi 4B
- Mounting Type
- Adhesive tape
- Features
- Thermal Tape
- Weight
- 0.71 ounces
View on Amazon: Haojiaho Raspberry Pi 4B Pure Copper Heatsink Affiliate link
This Haojiaho heatsink is made from pure copper, offering better thermal conductivity than aluminum. It is designed specifically for the Raspberry Pi 4B. The unit uses adhesive tape for mounting, so you do not need screws. It weighs 0.71 ounces. The passive design runs quietly without fans. This kit suits users who want efficient cooling for a single Pi 4B board without noise.
Pros
- Constructed from 100% pure copper for high thermal efficiency
- Specifically designed to fit the Raspberry Pi 4B perfectly
- Passive design ensures quiet operation with no moving parts
- Includes thermal conductive adhesive tape for easy installation
Cons
- Only compatible with the Raspberry Pi 4B
- Adhesive mounting may not suit all user preferences
- Single heatsink does not cover other Pi components
Good fit if
- You own a Raspberry Pi 4B and need targeted cooling
- You prefer passive cooling to avoid fan noise
- You want a simple adhesive installation without screws
Skip if
- You have a Raspberry Pi 5 or 4B+ model
- You need to cool multiple components on the board
- You require a fan-assisted cooling solution
Verdict: Haojiaho Pure Copper Raspberry Pi 4B Heatsink is a focused solution for Pi 4B owners. It delivers efficient passive cooling through pure copper construction and simple adhesive mounting.
Easycargo 15x15x0.5mm Copper Shims 20-Pack
Best for: passive cooling of laptop GPUs and CPUs
- Material
- Copper
- Cooling Method
- passive
- Compatible Device
- Laptop GPU CPU IC Chips VGA RAM
- Dimensions
- 15x15x0.5mm
- Mounting Type
- Pre applied adhesive tape backing
- Features
- Thermal Tape
View on Amazon: Easycargo 15x15x0.5mm Copper Shims 20-Pack Affiliate link
This kit includes 20 copper pad shims measuring 15x15x0.5mm. Each shim features pre-applied 3M 8810 thermal conductive adhesive tape. The design supports passive cooling for laptop GPUs, CPUs, and VRAM ICs. You get a copper tone finish that aids heat dissipation. This set suits users needing small, direct-contact cooling solutions for compact electronics.
Pros
- Includes 20 copper pad shims
- Dimensions are 15x15x0.5mm
- Pre-applied 3M 8810 thermal adhesive
- Passive cooling for laptop components
Cons
- Small 15x15mm size limits coverage area
- Passive cooling only, no fan included
- Adhesive backing may not suit all surfaces
Good fit if
- You need passive cooling for laptop GPUs
- You require small 15mm copper shims
- You want pre-applied thermal adhesive tape
Skip if
- You need active cooling with fans
- You require large surface area coverage
- You prefer non-copper materials
Verdict: Easycargo 15mm Copper Heatsink Pads offers a practical passive cooling solution for laptop GPUs and CPUs. You should choose this kit if you need small, adhesive-backed copper shims for compact electronic components.
Easycargo 9mm Copper VRM Heatsinks
Best for: cooling small VRM and MOSFET components
- Material
- Copper
- Cooling Method
- passive
- Compatible Device
- VRM GPU Stepper Driver MOSFET Regulators
- Dimensions
- 9mm x 9mm x 4mm
- Mounting Type
- Pre applied adhesive tape backing
- Features
- Thermal Tape
View on Amazon: Easycargo 9mm Copper VRM Heatsinks Affiliate link
This kit includes ten 9x9x4mm copper heatsinks designed for passive cooling of VRMs, MOSFETs, and stepper drivers. The units feature a pre-applied thermal conductive adhesive tape, simplifying installation on small components. You get a pure copper build for efficient heat dissipation without the need for fans. It is a practical solution for compact electronics where space is limited and airflow is restricted.
Pros
- Made from pure copper for high thermal conductivity
- Pre-applied thermal conductive adhesive tape for easy mounting
- Compact 9x9x4mm dimensions fit tight spaces
- Includes ten units for multiple components
- Passive cooling requires no power or fans
Cons
- Small 9x9mm surface area limits total heat dissipation
- Passive design only suitable for low-to-moderate heat loads
- Adhesive backing may leave residue if removed
Good fit if
- You need to cool VRM or MOSFET components on a PCB
- You have limited space and cannot fit larger heatsinks
- You prefer a passive cooling solution with no moving parts
Skip if
- You require active cooling with a fan for high heat loads
- You need to cool a main CPU or GPU chip
- You prefer removable mounts without adhesive
Verdict: Easycargo 9mm Copper VRM Heatsink is a solid choice for cooling small power components like MOSFETs and VRMs in compact builds. It suits you if you need reliable passive cooling for low-to-moderate heat sources in tight spaces.
Easycargo 40mm Copper Heatsink 2-Pack
Best for: cooling NEMA 17 motors and 3D printers
- Material
- copper
- Compatible Device
- 3D printers, NEMA 17, Peltier Cooler
- Dimensions
- 40mm x 40mm x 4mm
- Mounting Type
- preapplied adhesive tape
- Features
- Thermal Tape
- Weight
- 1.27 ounces
View on Amazon: Easycargo 40mm Copper Heatsink 2-Pack Affiliate link
This kit includes two 40x40x4mm copper heatsinks with pre-applied thermal adhesive tape. The compact 0.16-inch height allows for tight spaces. It is designed for cooling components in 3D printers, NEMA 17 motors, and TEC1-12706 thermoelectric coolers. You get solid copper material for heat dissipation without needing separate adhesive application. This setup suits users who need reliable passive cooling for specific electronic components.
Pros
- Made of pure copper for effective heat transfer
- Includes pre-applied thermal conductive adhesive tape
- Compact 40x40x4mm size fits tight spaces
- Compatible with NEMA 17 and Peltier coolers
Cons
- Only includes two heatsinks per kit
- Passive cooling lacks active fan support
- Limited to small surface area applications
Good fit if
- You need to cool NEMA 17 stepper motors
- You are building a 3D printer assembly
- You require passive cooling for Peltier devices
Skip if
- You need high airflow for CPUs
- You require active fan integration
- You need heatsinks for large server components
Verdict: Easycargo 40mm Copper Heatsink is a simple, passive cooling solution for specific electronics. It fits users who need to manage heat in 3D printers or NEMA 17 motors without space for fans.
Easycargo SODIMM Copper Memory Heatsink
Best for: Laptop SODIMM RAM passive cooling
- Material
- Copper
- Compatible Device
- Laptop Notebook SODIMM RAM
- Dimensions
- 63mmx23mmx0.5mm
- Mounting Type
- Pre-applied adhesive tape
- Features
- Thermal Tape
- Length
- 2.48 inches
View on Amazon: Easycargo SODIMM Copper Memory Heatsink Affiliate link
This is a low-profile copper heatsink designed for laptop SODIMM RAM modules. It measures 63mm by 23mm with a thickness of 0.5mm. The unit weighs 5 grams per piece. It includes pre-applied 3M 8810 thermal conductive adhesive tape for installation. You should use this if you need passive cooling for notebook memory components that fit this specific physical layout.
Pros
- Pure copper construction for heat dissipation
- Pre-applied 3M 8810 thermal adhesive tape
- Low profile design at 0.5mm thickness
- Lightweight at 5 grams per piece
Cons
- Limited to SODIMM laptop memory layout
- No active fan for forced airflow
- Single heatsink per unit sold
Good fit if
- You need passive cooling for laptop RAM
- Your SODIMM module fits the 63x23mm footprint
- You want a simple adhesive installation
Skip if
- You require active cooling with a fan
- You are cooling desktop DIMM RAM
- You need multiple heatsinks in one pack
Verdict: Easycargo Laptop RAM Copper Heatsink is a specialized passive cooler for notebook memory. It fits users who need a simple, low-profile solution for SODIMM modules. It does not suit desktop computers or active cooling needs.
Specifications side by side
| Spec | GeeekPi 18-Piece Pure Copper Heatsink Set | Easycargo 20-Piece Copper and Aluminum Heatsink Kit | Haojiaho Raspberry Pi 4B Pure Copper Heatsink | Easycargo 15x15x0.5mm Copper Shims 20-Pack | Easycargo 9mm Copper VRM Heatsinks | Easycargo 40mm Copper Heatsink 2-Pack | Easycargo SODIMM Copper Memory Heatsink |
|---|---|---|---|---|---|---|---|
| Material | Pure Copper | Aluminum + Copper | Pure copper | Copper | Copper | copper | Copper |
| Cooling Method | not stated | not stated | not stated | passive | passive | not stated | not stated |
| Compatible Device | Raspberry Pi 5/4B | Raspberry Pi 5 4 3 boards | Raspberry Pi 4B | Laptop GPU CPU IC Chips VGA RAM | VRM GPU Stepper Driver MOSFET Regulators | 3D printers, NEMA 17, Peltier Cooler | Laptop Notebook SODIMM RAM |
| Dimensions | not stated | not stated | not stated | 15x15x0.5mm | 9mm x 9mm x 4mm | 40mm x 40mm x 4mm | 63mmx23mmx0.5mm |
| Mounting Type | Thermal Conductive Adhesive Tape | Pre-applied adhesive tape backing | Adhesive tape | Pre applied adhesive tape backing | Pre applied adhesive tape backing | preapplied adhesive tape | Pre-applied adhesive tape |
| Features | Thermal Tape | Thermal Tape | Thermal Tape | Thermal Tape | Thermal Tape | Thermal Tape | Thermal Tape |
| Weight | 2.47 ounces | 0.64 ounces | 0.71 ounces | not stated | not stated | 1.27 ounces | not stated |
| Length | not stated | not stated | not stated | 0.59 inches | not stated | not stated | 2.48 inches |
| Width | not stated | not stated | not stated | 0.59 inches | not stated | not stated | 0.91 inches |
| Model | F-0029 | not stated | CMP | NA | ES-H12B141407 | 404004C02-8810 | 6323-05-8810 |
| Color | not stated | Multicolored (20pcs) | Copper | Copper Tone | 10pcs 9x9x4mm Copper | 2pcs 40x40x4mm Copper | not stated |
| Size | not stated | not stated | not stated | 15x15x0.5mm | not stated | not stated | not stated |
If you require liquid cooling setups, examine ediy pure copper radiator 360mm alternatives for full dimensional specifications.
Frequently asked questions
Are there cheaper alternatives to the GeeekPi 18-piece set?
The Easycargo 20-Piece Copper and Aluminum Heatsink Kit is a budget-friendly option. It includes both copper and aluminum materials, offering a mix of thermal properties. This kit weighs only 0.64 ounces, making it lighter than the pure copper GeeekPi set. It is designed for multi-component cooling on Raspberry Pi boards using thermal tape.
Which heatsink is best for pure copper performance?
The Haojiaho Raspberry Pi 4B Pure Copper Heatsink is a premium choice for users who want pure copper construction. It is specifically designed for the Raspberry Pi 4B model. The heatsink uses thermal tape for simple mounting and delivers efficient passive cooling. It weighs 0.71 ounces and is ideal for focused component cooling.
Can I use these heatsinks for laptop components?
Yes, the Easycargo 15x15x0.5mm Copper Shims are compatible with laptops. They are suitable for passive cooling of laptop GPUs and CPUs. The shims are 0.59 inches square and feature thermal tape for easy application. They are also compatible with RAM modules, providing a compact solution for heat management in tight spaces.
What is the best heatsink for VRM cooling?
The Easycargo 9mm Copper VRM Heatsinks are best for cooling small power components. They are designed for VRMs and MOSFETs in compact builds. Each heatsink measures 0.35 inches by 0.16 inches. They use thermal tape for adhesion and are suitable for low-to-moderate heat sources where space is limited.
Are there heatsinks for 3D printers?
The Easycargo 40mm Copper Heatsink is designed for 3D printers and NEMA 17 motors. It provides passive cooling without requiring fans. The heatsink measures 1.57 inches by 1.57 inches with a height of 0.16 inches. It weighs 1.27 ounces for a two-pack and uses thermal tape for installation on specific electronic components.
Is there a heatsink for laptop RAM?
The Easycargo SODIMM Copper Memory Heatsink is specialized for notebook memory. It fits SODIMM modules in laptops and uses thermal tape for mounting. The heatsink measures 0.91 inches by 2.48 inches. It is not suitable for desktop computers or applications requiring active cooling, making it a targeted solution for passive RAM cooling.