Dynatron vs SilverStone Heatsinks: Which Brand Fits You?
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When you compare dynatron vs SilverStone heatsink options, you are looking at two very different cooling solutions. Both brands use copper for their primary heat transfer surfaces. The main difference lies in their intended use and design. Dynatron offers an active blower fan for consumer desktops. SilverStone provides a passive cooler built for compact server racks. Your choice depends on whether you need moving air or silent operation.
Key differences
| Aspect | Dynatron Copper LGA1156 Blower Heatsink | SilverStone 1U Passive Copper Server Heatsink |
|---|---|---|
| Cooling Method | Active fan | Passive |
| Socket Compatibility | LGA1156 | LGA2011/2066 |
| Fan Size | 3-inch | not listed |
| System Type | Desktop | Server |
| Height | 1.12 inches | 1.02 inches |
Which one should you choose?
Choose Dynatron Copper LGA1156 Blower Heatsink if
- You need active airflow for an Intel LGA1156 desktop CPU.
- You prefer a cooler with an attached 3-inch fan.
- You are cooling an Intel i5 or i7 processor.
Choose SilverStone 1U Passive Copper Server Heatsink if
- You require a passive cooler for a 1U server chassis.
- You are using an Intel LGA2011 or LGA2066 socket.
- You need a compact solution under 1.1 inches tall.
Verdict: Choose the Dynatron if you are upgrading an older desktop system with an LGA1156 socket and need a fan. Select the SilverStone unit if you are building a 1U server with LGA2011 or LGA2066 processors and require passive cooling.
Dynatron vs SilverStone Spec Breakdown
Socket Compatibility
The Dynatron K199 is designed specifically for Intel LGA1156 sockets. This makes it a direct fit for older Core i5 and i7 processors from the first and second generations. You cannot install this cooler on modern motherboards. The SilverStone SST-XE01-2011 targets server environments. It supports LGA2011 and LGA2066 sockets. These are high-end workstation and server platforms. If you have an older consumer PC, the Dynatron is the only option. For new server builds, the SilverStone is the correct choice. They serve entirely different markets.
Cooling Method
Active cooling requires moving air to remove heat. The Dynatron K199 includes a 3-inch blower fan. It uses a 4-pin connector and runs on DC12V. The fan speed varies with duty cycles, reaching up to 2600 RPM. This moves air across the copper fins to cool the CPU. The SilverStone SST-XE01-2011 is a passive cooler. It has no fan. It relies on case airflow or chassis fans to push air through its fins. This design reduces noise and power consumption but depends on good system ventilation. You must choose based on your airflow needs.
Build Material
Both brands use copper for the base material. Copper conducts heat away from the CPU die faster than aluminum. The Dynatron K199 uses a solid copper heat sink. This is a standard, cost-effective design for its price point. The SilverStone SST-XE01-2011 uses copper skived-fin technology. Skiving creates thin fins from a solid block of copper. This method often provides better thermal contact and higher density than extruded aluminum or standard copper fins. Both use copper, but the SilverStone construction is more specialized for high-density heat dissipation in server racks.
System Type
The Dynatron K199 is a consumer-grade cooler. It is built for standard desktop towers or small form factor cases that fit LGA1156 motherboards. The 3-inch fan is small, suitable for compact spaces. The SilverStone SST-XE01-2011 is built for 1U rackmount servers. Its 26mm height is critical for fitting into tight server chassis. This cooler is not for home desktops. It is for data centers or professional workstations where space is extremely limited and reliability is key. You will not find this in a gaming PC.
Fan Size
Fan size affects airflow and noise levels. The Dynatron K199 comes with a 3-inch blower fan. This is smaller than standard 120mm or 140mm fans. Smaller fans often spin faster to move the same amount of air, which can increase noise. The SilverStone SST-XE01-2011 has no fan at all. It relies on external airflow. If you need a self-contained cooling solution with a fan, the Dynatron is your only choice. If you have high static pressure fans in your case, the SilverStone passive design can work well without adding another fan to the mix.
Choose Your CPU Cooler Profile
Owner of older LGA1156 desktop
You need a replacement for an Intel Core i5 or i7 processor on an LGA1156 motherboard. This Dynatron unit includes a 3-inch blower fan with a 4-pin connector. It provides active cooling for legacy consumer systems. The copper heat sink and fan assembly fit the specific socket requirements of your older hardware.
Building a compact 1U server
You are constructing a 1U rackmount server and need passive cooling. This SilverStone heatsink is designed for Intel LGA2011 or LGA2066 sockets. It stands only 26mm tall, fitting strict height constraints. The copper skived-fin and base design dissipates heat without fans, ensuring silent operation in a dense server environment.
Seeking silent server operation
You require a fanless solution for a high-density server chassis. This passive cooler uses copper skived fins and a copper base to move heat. It supports LGA2011 and LGA2066 processors. The lack of moving parts eliminates noise and maintenance, making it ideal for environments where silence and reliability are critical specifications.
The products compared
Dynatron Copper LGA1156 Blower Heatsink
Best for: LGA1156 Intel CPUs in small cases
- Socket Compatibility
- LGA1156
- Material
- Copper
- Compatible Device
- Intel i5 & i7 CPUs
- Fan Size
- 3-inch
- Dimensions
- 3.35 x 3.21 x 1.12 inches
- Features
- Fan
View on Amazon: Dynatron Copper LGA1156 Blower Heatsink Affiliate link
This Dynatron K199 is a copper heat sink designed for Intel LGA1156 sockets, including i5 and i7 CPUs. It features a 3-inch blower fan with a 4-pin connector. The unit measures 3.35 x 3.21 x 1.12 inches and weighs 12.5 ounces. The fan uses double ball bearings and runs at up to 2600 RPM. It suits users needing a compact, passive-ready style cooler for older Intel platforms.
Pros
- Copper heat sink material for efficient heat transfer
- 3-inch blower fan with 4-pin PWM connector
- Compact 1.12-inch height fits small form factor cases
- Double ball bearing fan for durability
Cons
- Limited to LGA1156 socket compatibility
- Small 3-inch fan may produce more noise
- Low airflow rating of 3.533 CFM
Good fit if
- You own an Intel LGA1156 CPU
- You need a low-profile cooler under 2 inches
- You prefer copper heat sinks
Skip if
- You use a modern Intel socket like LGA1700
- You need high airflow for overclocking
- You require a 120mm or larger fan
Verdict: Dynatron K199 LGA1156 Copper Cooler is a specialized solution for LGA1156 systems. It fits users who need a small, copper-based cooler for older Intel processors.
SilverStone 1U Passive Copper Server Heatsink
Best for: 1U server chassis with LGA2011/2066 CPUs
- Socket Compatibility
- LGA2011/2066
- Material
- Copper skived-fin and copper base
- Server Height
- 1U
- Cooling Method
- Passive
- System Type
- Server
- Dimensions
- 3.54 × 3.54 × 1.02 inches
View on Amazon: SilverStone 1U Passive Copper Server Heatsink Affiliate link
This SilverStone SST-XE01-2011 is a passive copper cooler designed for 1U rackmount servers. It measures 1.02 inches in height and supports LGA2011 and LGA2066 sockets. The build uses skived-fin copper and a copper base for heat transfer. It weighs 1.08 pounds. You need this for dense server environments where airflow comes from external case fans rather than a bundled unit.
Pros
- Passive cooling design eliminates fan noise
- Copper skived-fin and base construction
- Compatible with LGA2011 and LGA2066 sockets
- Fits 1U rackmount server chassis
Cons
- Requires external high-static pressure fans
- Limited to LGA2011 and LGA2066 sockets only
- No included fan for immediate installation
Good fit if
- You are building a 1U rackmount server
- You use LGA2011 or LGA2066 processors
- You want silent operation via external airflow
Skip if
- You need support for consumer sockets like LGA1700
- You require a cooler with an included fan
- You are building a standard desktop PC case
Verdict: SilverStone 1U Passive Copper CPU Cooler fits 1U server builds with LGA2011 or LGA2066 CPUs. It relies on your chassis fans for cooling rather than providing its own.
Specifications side by side
| Spec | Dynatron Copper LGA1156 Blower Heatsink | SilverStone 1U Passive Copper Server Heatsink |
|---|---|---|
| Socket Compatibility | LGA1156 | LGA2011/2066 |
| Material | Copper | Copper skived-fin and copper base |
| Server Height | not stated | 1U |
| Cooling Method | not stated | Passive |
| Compatible Device | Intel i5 & i7 CPUs | not stated |
| Fan Size | 3-inch | not stated |
| Dimensions | 3.35 x 3.21 x 1.12 inches | not stated |
| System Type | not stated | Server |
| Features | Fan | not stated |
| Weight | 12.5 ounces | 1.08 pounds |
| Model | K199 | SST-XE01-2011 |
| Color | not stated | 1U LGA2011/2066 Passive |
Frequently asked questions
Can I use the SilverStone 1U heatsink on a standard desktop PC?
No. This SilverStone unit is designed for 1U server chassis. It is a passive cooler that relies on your case fans for airflow. Standard desktop cases usually lack the high-static-pressure fans required to push air through a dense passive block effectively. You should only consider this for server builds or specialized low-profile systems.
Does the Dynatron cooler come with a fan included?
Yes. The Dynatron K199 includes an active blower fan. This is necessary because the unit is not passive. The fan provides direct airflow over the copper fins. You get a complete cooling solution for LGA1156 systems without needing to source a compatible blower fan separately.
Is the SilverStone heatsink compatible with modern LGA1700 motherboards?
No. The SilverStone SST-XE01-2011 supports LGA2011 and LGA2066 sockets. These are server-grade platforms. It does not fit LGA1700, which is used for current Intel desktop processors. You must verify your motherboard socket before purchasing this specific SilverStone model.
Which cooler is lighter for shipping or installation?
The Dynatron K199 is lighter. It weighs 12.5 ounces. The SilverStone unit weighs 1.08 pounds. The SilverStone block is significantly heavier due to its dense copper construction for server environments. If weight is a concern for your build, the Dynatron option is the lighter choice.
Do I need to buy a separate fan for the SilverStone cooler?
Yes. The SilverStone SST-XE01-2011 is a passive heatsink. It has no integrated fan. You must provide your own airflow solution. This typically means using high-static-pressure fans mounted in your 1U chassis. The Dynatron model includes its fan, so you do not need to buy one separately.
What is the physical height of the SilverStone heatsink?
The SilverStone heatsink is 1.02 inches tall. This strict height limit defines it as a 1U profile cooler. It is designed to fit into very shallow server cases. The Dynatron cooler is taller at 1.12 inches, which may not fit in ultra-compact 1U enclosures.