Dynatron vs KFXJMY Heatsinks: Which Brand Fits You?
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This dynatron vs KFXJMY heatsink comparison helps you choose between two very different cooling solutions. Both units target Intel processors but serve distinct computing environments. The Dynatron K199 is an active copper cooler with a fan, designed for desktop CPUs. The KFXJMY is a passive server radiator intended for rack-mounted systems. Understanding their specific socket support and cooling methods is key to selecting the right hardware for your build.
Key differences
| Aspect | Dynatron Copper LGA1156 Blower Heatsink | KFXJMY 2U Passive LGA 2011 Server Heatsink |
|---|---|---|
| Cooling Method | Active (with fan) | Passive |
| Socket Compatibility | LGA1156 | LGA 2011 Narrow |
| System Type | Desktop | Server |
| Material | Copper | not listed |
| Fan Size | 3-inch | not listed |
Which one should you choose?
Choose Dynatron Copper LGA1156 Blower Heatsink if
- You need an active cooling solution for an Intel LGA1156 desktop processor.
- You require a copper heatsink with an attached 3-inch fan for standard airflow.
- You are upgrading an older desktop system that uses LGA1156 sockets.
Choose KFXJMY 2U Passive LGA 2011 Server Heatsink if
- You are building a server system that requires a passive LGA 2011 Narrow heatsink.
- You need a low-profile 2U cooler for a rack-mounted environment without fan noise.
- You are replacing a SNK-P0048PS unit in a server motherboard like X9DRI-F.
Verdict: Choose the Dynatron K199 if you are cooling a standard desktop CPU on an LGA1156 motherboard. Select the KFXJMY unit only if you are working with server hardware requiring a passive LGA 2011 Narrow cooler. These products serve entirely different markets and are not interchangeable.
Specs: Dynatron vs KFXJMY
Cooling Method
The Dynatron K199 uses an active cooling approach, relying on a 3-inch blower fan to move air across its copper fins. This fan runs on DC12V and offers variable speeds, reaching up to 2600 RPM at a 50% duty cycle to push 3.533 CFM of air. In contrast, the KFXJMY is a passive heatsink. It has no fan and relies entirely on case airflow or external server fans to dissipate heat. This makes the KFXJMY silent by design, but dependent on your system's existing air movement. You need a fan for the Dynatron, but not for the KFXJMY.
Socket Compatibility
Socket support is a critical factor for fitment. The Dynatron K199 is explicitly designed for the LGA1156 socket, targeting older Intel Core i5 and i7 desktop processors. It features a mounting system specific to this platform. The KFXJMY targets the LGA 2011 Narrow socket, intended for server-grade CPUs like those used in X9DRI-F motherboards. These sockets are physically different and not interchangeable. You must choose the cooler that matches your motherboard's specific socket type. Neither unit supports the other's socket standard.
System Type
These coolers serve different computing environments. The Dynatron K199 is built for desktop systems, where space is limited but active cooling is standard. Its compact 3.35 x 3.21 x 1.12 inch footprint fits typical desktop cases. The KFXJMY is designed for 2U server chassis. Its narrow profile and passive design fit the specific height and airflow requirements of enterprise server racks. You cannot easily fit a 2U server heatsink into a standard desktop tower, nor is a desktop blower fan ideal for a sealed server chassis. Your case type dictates the choice.
Build Material
Heat transfer efficiency often starts with the base material. The Dynatron K199 uses copper for its heat sink. Copper has high thermal conductivity, allowing it to pull heat away from the CPU die quickly. The KFXJMY does not list a specific metal material in the provided data, though server heatsinks often use aluminum or copper. The Dynatron also includes a 4-pin PWM connector for fan control, adding electronic components to the build. The KFXJMY is a simple metal block. For known conductive properties, the Dynatron has a documented advantage.
Fan Specifications
Air movement is defined by the fan on the Dynatron. It features a double ball bearing fan rated for 12V operation. The speed varies with duty cycle, from 1200 RPM at low power to 2600 RPM at higher power. This allows you to balance noise and cooling performance. The KFXJMY has no fan listed. It is a passive radiator. This means zero noise from the cooler itself, but you must ensure your server or case has sufficient airflow. If you need adjustable cooling, the Dynatron is the only option with active fan control.
Choose Your Cooler By Use Case
LGA1156 desktop user needing active cooling
You need a fan for LGA1156 sockets. This copper heatsink includes a 3-inch blower fan. It reaches 2600 RPM for airflow. The unit weighs 12.5 ounces. It fits Intel i5 and i7 processors. Active cooling ensures your CPU stays cool during standard desktop tasks without relying on case fans alone.
Server builder using LGA2011 passive cooling
You require a passive radiator for LGA2011 narrow sockets. This heatsink has no fan, relying on server airflow. It fits 2U chassis specifications. The black finish suits professional server environments. It replaces older SNK-P0048PS models. This design is ideal for systems where external fans provide all necessary cooling.
User prioritizing copper construction for heat transfer
Copper conducts heat better than aluminum. This Dynatron unit is made entirely of copper. It pairs this material with a direct-attached blower fan. The 3.35 x 3.21 x 1.12 inch size fits standard desktop cases. If you want the thermal benefits of copper in an active setup, this is the practical choice for older Intel platforms.
The products compared
Dynatron Copper LGA1156 Blower Heatsink
Best for: Older Intel LGA1156 small form factor builds
- Socket Compatibility
- LGA1156
- Material
- Copper
- Compatible Device
- Intel i5 & i7 CPUs
- Fan Size
- 3-inch
- Dimensions
- 3.35 x 3.21 x 1.12 inches
- Features
- Fan
View on Amazon: Dynatron Copper LGA1156 Blower Heatsink Affiliate link
This Dynatron K199 is a copper heat sink designed for Intel LGA1156 sockets. It includes a 3-inch blower fan with a 4-pin connector. The fan runs at up to 2600 RPM at 50% duty cycle, moving 3.533 CFM of air. It weighs 12.5 ounces and measures 3.35 by 3.21 by 1.12 inches. This compact unit suits small form factor builds requiring passive cooling support for i5 or i7 processors.
Pros
- Copper heat sink material for efficient heat transfer
- Compatible with Intel LGA1156 socket
- Includes 3-inch blower fan with 4-pin connector
- Compact dimensions of 3.35 x 3.21 x 1.12 inches
Cons
- Limited to LGA1156 socket compatibility
- Low airflow rating of 3.533 CFM
- Blower fan design restricts exhaust direction
Good fit if
- You need a cooler for an LGA1156 socket
- You are building a small form factor PC
- You prefer copper heat sink materials
Skip if
- You use a modern CPU socket like LGA1700
- You require high airflow for overclocking
- You need compatibility with AMD processors
Verdict: Dynatron K199 3-Inch Copper LGA1156 Cooler is a specialized unit for older Intel platforms. It fits users with LGA1156 CPUs who need a low-profile cooling solution for compact cases.
KFXJMY 2U Passive LGA 2011 Server Heatsink
Best for: 2U server builds with LGA 2011 narrow
- Socket Compatibility
- LGA 2011 Narrow
- Server Height
- 2U
- Cooling Method
- Passive
- Compatible Device
- Server CPU
- Lighting
- RGB
- Color
- Black
View on Amazon: KFXJMY 2U Passive LGA 2011 Server Heatsink Affiliate link
This is a passive cooling solution designed for server environments. It supports the LGA 2011 narrow socket and fits within a 2U chassis height. The unit measures 0.39 inches in width, height, and length, with a black finish. Because it lacks a fan, it relies on system airflow. It is suitable for low-heat server CPUs where noise and power consumption from fans are concerns.
Pros
- Passive cooling design eliminates fan noise
- Compatible with LGA 2011 narrow socket
- Fits standard 2U server chassis height
- Compact dimensions of 0.39 inches
Cons
- No fan included for active cooling
- Only supports LGA 2011 narrow socket
- Requires strong case airflow to function
Good fit if
- You are building a low-noise server
- You need a replacement for SNK-P0048PS
- Your chassis has high airflow fans
Skip if
- You need active cooling for high TDP CPUs
- You use a consumer desktop motherboard
- You require LGA 1156 socket support
Verdict: KFXJMY LGA2011 Passive Server Heatsink is a specialized component for 2U server builds using LGA 2011 narrow sockets. It fits users who prioritize silence and have adequate chassis airflow for passive dissipation.
Specifications side by side
| Spec | Dynatron Copper LGA1156 Blower Heatsink | KFXJMY 2U Passive LGA 2011 Server Heatsink |
|---|---|---|
| Socket Compatibility | LGA1156 | LGA 2011 Narrow |
| Material | Copper | not stated |
| Server Height | not stated | 2U |
| Cooling Method | not stated | Passive |
| Compatible Device | Intel i5 & i7 CPUs | Server CPU |
| Fan Size | 3-inch | not stated |
| Dimensions | 3.35 x 3.21 x 1.12 inches | not stated |
| Lighting | not stated | RGB |
| System Type | not stated | Server |
| Color | not stated | Black |
| Features | Fan | not stated |
| Weight | 12.5 ounces | not stated |
| Model | K199 | KFXJMY |
| Size | not stated | A-RGB |
Frequently asked questions
Can the Dynatron K199 fit in a standard ATX case?
Yes, but it is designed for small form factor builds. Its compact dimensions of 3.21 by 3.35 inches make it suitable for tight spaces. The 1.12-inch height allows it to clear low-profile memory modules. It is not a standard tower cooler for large cases.
Does the KFXJMY heatsink include a fan for active cooling?
No, this unit is a passive heatsink. It relies entirely on case airflow to dissipate heat from the CPU. You must ensure your server chassis has adequate fans to push air through the fins. It does not come with an integrated blower or axial fan.
Which socket does the Dynatron cooler support?
The Dynatron K199 supports only the LGA 1156 socket. It is built specifically for older Intel platforms from that era. It will not fit modern LGA 1700 or LGA 1200 motherboards. Verify your motherboard socket before purchasing this specific model.
Is the KFXJMY heatsink compatible with consumer desktop motherboards?
It is designed for LGA 2011 narrow sockets in server environments. While the socket matches some older workstations, the unit is intended for 2U server builds. It lacks the mounting hardware typical for consumer desktop cases. Check your chassis form factor and socket type carefully.
What material is used in the Dynatron K199 heatsink?
The Dynatron K199 uses copper as its primary heat transfer material. Copper offers high thermal conductivity for efficient heat dissipation. The unit combines these copper fins with a 3-inch blower fan. This active approach helps manage temperatures on older LGA 1156 processors.
How heavy is the Dynatron K199 heatsink?
The Dynatron K199 weighs 12.5 ounces. This weight reflects its copper construction and included fan assembly. The mass helps stabilize the cooler on the CPU socket. Ensure your motherboard can support this weight without sagging, especially in smaller cases.
Does the KFXJMY heatsink have RGB lighting?
Yes, the KFXJMY passive heatsink includes A-RGB lighting. The product data lists lighting as a key feature for this model. The fins are black, and the RGB component adds visual appeal. This feature is unusual for passive server components but is present in this specific unit.
Which brand is better for a silent 2U server build?
The KFXJMY heatsink is the better choice for silent 2U servers. It is a passive unit with no moving parts, eliminating fan noise entirely. The Dynatron K199 uses an active fan, which generates audible noise. For silence in a server rack, the passive KFXJMY is the logical selection.