Dynatron or Easycargo? Heatsinks Compared in 2026
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This dynatron vs easycargo heatsink comparison looks at two very different cooling components. Both use copper for heat transfer. The main difference lies in their function. The Dynatron is a complete active cooling solution with a fan for desktop processors. The Easycargo product is a pack of passive copper shims designed for smaller electronic components. You need to choose based on your specific hardware and cooling needs.
Key differences
| Aspect | Dynatron Copper LGA1156 Blower Heatsink | Easycargo 15x15x0.5mm Copper Shims 20-Pack |
|---|---|---|
| Product Type | Active heatsink with fan | Passive copper shims |
| Compatible Device | Intel i5 & i7 CPUs | Laptop GPU, CPU, IC Chips, VGA RAM |
| Socket Compatibility | LGA1156 | Not listed |
| Dimensions | 3.35 x 3.21 x 1.12 inches | 0.59 x 0.59 x 0.02 inches |
| Mounting | Fan attached, 4-pin connector | Pre-applied 3M 8810 adhesive tape |
Which one should you choose?
Choose Dynatron Copper LGA1156 Blower Heatsink if
- You are cooling an Intel LGA1156 CPU
- You need active airflow with a fan
- You require a complete heatsink assembly
Choose Easycargo 15x15x0.5mm Copper Shims 20-Pack if
- You need passive cooling for small chips
- You are working on laptop or GPU components
- You require thin copper shims with adhesive
Verdict: Choose the Dynatron if you need to cool a desktop processor with active airflow. Select the Easycargo shims if you are applying passive heat dissipation to small electronic components like laptop GPUs or RAM. The correct choice depends entirely on whether you need a full heatsink or just thermal shims.
Dynatron vs Easycargo Heatsink Specs
system type
The Dynatron K199 is a complete active cooling solution designed for desktop systems. It includes a 3-inch blower fan attached directly to the copper heatsink. This setup moves air across the fins to dissipate heat from the CPU. In contrast, the Easycargo product is a passive component. It consists of copper pad shims with thermal adhesive. These are used to bridge gaps between chips and larger heatsinks. You cannot use the Easycargo shims as a standalone cooling unit for a processor. The Dynatron provides the primary cooling mechanism, while the Easycargo assists in thermal transfer for other components.
socket compatibility
Socket compatibility is critical for desktop CPU cooling. The Dynatron K199 is explicitly designed for Intel LGA1156 sockets. It fits Intel i5 and i7 processors from that era. The Easycargo shims do not have a specific socket compatibility. They are generic copper pads used for laptop GPUs, VRAM, ICs, and chipsets. If you are building or upgrading a desktop PC with an LGA1156 processor, the Dynatron is the only viable option. The Easycargo product serves a different purpose and cannot be mounted to a CPU socket directly.
fan size
Active cooling requires a fan to move air. The Dynatron K199 includes a 3-inch blower fan. This fan operates on DC12V with a 4-pin connector. It runs at varying speeds depending on the duty cycle, reaching up to 2600 RPM. The Easycargo product has no fan. It is a passive shim made of copper. It relies on the existing airflow from other fans in the system or natural convection. For a standalone CPU cooler, the Dynatron’s integrated fan is essential. The Easycargo component lacks any moving parts or airflow generation capability.
dimensions
Physical size determines fitment inside your case. The Dynatron K199 measures 3.35 x 3.21 x 1.12 inches. It is a substantial block of copper with an attached fan. The Easycargo shims are tiny, measuring 0.59 x 0.59 x 0.02 inches (15x15x0.5mm). They are thin pads designed to fill small gaps. The Dynatron requires significant clearance around the CPU socket. The Easycargo shims are compact and fit into tight spaces between chips. You need a large open area for the Dynatron, but the Easycargo fits where space is extremely limited.
material
Both products use copper for heat transfer. Copper is an excellent conductor of heat. The Dynatron K199 is a solid copper heatsink. The entire block is made of copper to absorb heat from the CPU. The Easycargo shims are also made of copper. They use copper pads to conduct heat away from components like VRAM or GPU chips. Both leverage the high thermal conductivity of copper. The difference is in the form factor. The Dynatron uses copper for bulk heat absorption and dissipation. The Easycargo uses copper for targeted thermal bridging.
Choose the right cooler for your needs
Owner of an older LGA1156 desktop PC
You need a complete cooling solution for your Intel i5 or i7 processor. The Dynatron K199 is built specifically for the LGA1156 socket. It features a 3-inch blower fan that moves up to 3.533 CFM of air. This active cooling method is essential for maintaining safe temperatures in a desktop environment.
Technician repairing laptop or GPU components
You require small thermal shims for passive cooling applications. The Easycargo pack includes 20 copper pads measuring 15x15mm. These shims help bridge gaps between chips and heatsinks. The pre-applied 3M adhesive tape simplifies installation on laptop GPUs, VRAM, or chipset components without needing additional mounting hardware.
Builder needing specific socket compatibility
Your system uses an older Intel platform requiring LGA1156 support. The Dynatron heatsink matches this socket exactly. It includes a 4-pin connector for direct motherboard control. The copper construction and attached fan provide a turn-key upgrade for legacy desktop systems that need reliable processor cooling.
The products compared
Dynatron Copper LGA1156 Blower Heatsink
Best for: LGA1156 socket replacement cooling
- Socket Compatibility
- LGA1156
- Material
- Copper
- Compatible Device
- Intel i5 & i7 CPUs
- Fan Size
- 3-inch
- Dimensions
- 3.35 x 3.21 x 1.12 inches
- Features
- Fan
View on Amazon: Dynatron Copper LGA1156 Blower Heatsink Affiliate link
The Dynatron K199 is a copper heat sink designed for Intel LGA1156 sockets, including i5 and i7 processors. It includes a 3-inch blower fan with a 4-pin connector. The fan runs at speeds up to 2600 RPM at 50% duty cycle, moving 3.533 CFM of air. This compact unit measures 3.35 x 3.21 x 1.12 inches and weighs 12.5 ounces. It suits users needing a replacement cooler for older Intel platforms.
Pros
- Copper heat sink material for efficient heat transfer
- Includes 3-inch blower fan with 4-pin connector
- Fan speed reaches 2600 RPM at 50% duty cycle
- Compatible with Intel LGA1156 socket CPUs
Cons
- Limited to LGA1156 socket compatibility
- Small 3-inch fan size restricts airflow to 3.533 CFM
- Blower design may not suit all case airflow configurations
Good fit if
- You need a replacement cooler for an LGA1156 motherboard
- You are using an Intel i5 or i7 processor from that era
- You require a compact copper heatsink with a small fan
Skip if
- You have a modern socket like LGA1700 or AM5
- You need high airflow for overclocked CPUs
- You prefer large tower coolers for better cooling performance
Verdict: Dynatron K199 LGA1156 Copper Heatsink is a niche solution for maintaining older Intel LGA1156 systems. It fits users who need a direct replacement for stock cooling on legacy i5 or i7 builds.
Easycargo 15x15x0.5mm Copper Shims 20-Pack
Best for: filling small gaps in passive cooling setups
- Material
- Copper
- Cooling Method
- passive
- Compatible Device
- Laptop GPU CPU IC Chips VGA RAM
- Dimensions
- 15x15x0.5mm
- Mounting Type
- Pre applied adhesive tape backing
- Features
- Thermal Tape
View on Amazon: Easycargo 15x15x0.5mm Copper Shims 20-Pack Affiliate link
These are copper thermal shims designed to fill gaps between a heat sink and a component. Each pad measures 15x15x0.5mm and uses pre-applied 3M 8810 adhesive for mounting. They support passive cooling for laptop GPUs, CPUs, and VRAM chips. You should use them when you need to bridge a small distance to improve heat transfer. They do not include a fan or active cooling mechanism.
Pros
- Copper material for high thermal conductivity
- Pre-applied 3M 8810 adhesive tape
- Compact 15x15x0.5mm dimensions
- Suitable for passive cooling applications
Cons
- Passive cooling only with no fan included
- Small 15mm size limits surface area coverage
- Adhesive backing may not suit all mounting surfaces
Good fit if
- You need to bridge a small gap between a heatsink and a chip
- You are modifying a laptop GPU or CPU for passive cooling
- You require a copper shim with pre-applied adhesive
Skip if
- You need active cooling with a fan
- You require a heatsink for a desktop CPU socket
- You need a large surface area for high heat dissipation
Verdict: Easycargo Copper Thermal Shims 15mm is a niche accessory for bridging gaps in passive cooling setups. It fits users who need to fill small spaces between a heat sink and a component like a laptop GPU or CPU.
Specifications side by side
| Spec | Dynatron Copper LGA1156 Blower Heatsink | Easycargo 15x15x0.5mm Copper Shims 20-Pack |
|---|---|---|
| Socket Compatibility | LGA1156 | not stated |
| Material | Copper | Copper |
| Cooling Method | not stated | passive |
| Compatible Device | Intel i5 & i7 CPUs | Laptop GPU CPU IC Chips VGA RAM |
| Fan Size | 3-inch | not stated |
| Dimensions | 3.35 x 3.21 x 1.12 inches | 15x15x0.5mm |
| Mounting Type | not stated | Pre applied adhesive tape backing |
| Features | Fan | Thermal Tape |
| Weight | 12.5 ounces | not stated |
| Length | not stated | 0.59 inches |
| Width | not stated | 0.59 inches |
| Model | K199 | NA |
| Size | not stated | 15x15x0.5mm |
| Color | not stated | Copper Tone |
Frequently asked questions
Can I use Easycargo copper shims on an LGA1156 CPU?
No. The Easycargo shims are designed to fill small gaps in passive cooling setups for laptops or GPUs. The Dynatron K199 is a complete active heatsink with an attached fan. You need the Dynatron to cool an LGA1156 processor directly. The shims cannot replace a functional cooler.
What is the size of the Dynatron heatsink?
The Dynatron K199 measures 3.21 inches in width, 3.35 inches in length, and 1.12 inches in height. It weighs 12.5 ounces. These dimensions allow it to fit standard LGA1156 mounting holes. The attached fan is approximately three inches wide to match the heatsink base.
Are the Easycargo shims made of pure copper?
Yes. The product description lists the material as copper with a copper tone color. Each shim measures 15x15x0.5mm. They include thermal tape to help secure them between components. This material choice helps bridge gaps in passive heat transfer scenarios.
Does the Dynatron cooler work with modern Intel sockets?
No. The Dynatron K199 is compatible only with the LGA1156 socket. It is intended for older Intel i5 or i7 processors from that era. It will not fit newer sockets like LGA1700 or AM5. You must verify your motherboard socket before purchasing.
Can I use Easycargo shims to replace a broken fan?
No. The Easycargo product is a passive thermal shim, not an active cooling device. It has no moving parts or fan. The Dynatron K199 is the option that includes a fan. The shims are only for filling gaps, not for generating airflow or active cooling.
How thick are the Easycargo copper shims?
Each shim is 0.5mm thick. The overall size is 15x15mm. This thickness is designed to fill small spaces between a heat sink and a component. The 0.59-inch width and length match the 15mm metric specification. They are sold in packs of twenty for multiple uses.
Is the Dynatron heatsink compatible with AMD sockets?
No. The specifications list the socket compatibility as LGA1156 only. This is an Intel socket standard. AMD uses different sockets like AM4 or AM5. The Dynatron K199 will not mount on AMD motherboards. You need a cooler explicitly listed for your specific AMD socket.