Dynatron 1U Copper Blower Heatsink Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This dynatron r13 copper heatsink 2 review focuses on a compact cooling solution designed for tight server enclosures. The unit measures just 1.1 inches in height, fitting standard 1U rack spaces while maintaining a 3.15 by 4.06 inch footprint. It is built from Copper1100 with skived fins to maximize surface area for heat dissipation. The assembly includes a PWM-controlled ball bearing blower fan mounted in an alloy frame. This design targets Intel Socket 2011 systems using narrow ILM mounting, offering a specialized airflow path for high-density computing environments.
What stands out
- Copper1100 construction with skived fins for efficient heat transfer
- 1U server height allows installation in low-profile rack chassis
- Compatible with Intel Socket 2011 (Narrow ILM) motherboards
- Pre-applied Shin-Etsu G751 thermal grease simplifies initial setup
- Supports CPU power loads up to 95 Watts
Who it fits
Good fit for
You should consider this heatsink if you are building a small form factor server or workstation that requires a 1U profile. It is ideal for users with Intel Socket 2011 processors that do not exceed 95W TDP. The captive mounting system and pre-printed thermal paste make it a practical choice for IT administrators who need reliable, low-maintenance cooling in tight rack spaces without sacrificing basic thermal performance for moderate power draws.
Who should skip it
Skip this model if your processor exceeds 95 Watts, as the heatsink is not rated for higher power loads. It is also unsuitable for standard desktop cases due to its 1U blower design, which requires specific airflow paths found in server chassis. Additionally, if you use a different socket type, this unit will not fit. Users needing a wide base plate for large heat spreaders will find the 3.15 inch width restrictive for broader cooling applications.
Verdict: This is a specialized 1U cooling solution for moderate TDP CPUs on Socket 2011 narrow ILM platforms. It offers adequate thermal performance for low-power server builds within its strict size constraints.
Key specs explained for this unit
Material: Copper1100
This heatsink uses Copper1100 for its base and fins. Copper conducts heat quickly, moving thermal energy from the CPU to the fin array efficiently. You benefit from faster heat dissipation compared to aluminum units. This material choice helps maintain lower core temperatures under load, which is critical for server stability in confined 1U chassis spaces.
Server Height: 1U
The unit is designed to fit within a 1U server chassis, measuring just 1.1 inches in height. This low profile allows you to install it in standard rack-mounted enclosures where space is extremely limited. It ensures compatibility with standard server frames without requiring modifications, making it suitable for high-density computing environments.
Socket Compatibility: Intel Socket 2011 (Narrow ILM)
This cooler is compatible with Intel Socket 2011 processors using a Narrow ILM mounting bracket. You must verify your motherboard supports this specific socket and bracket type before purchase. It is not universal for all LGA 2011 boards. Matching the socket and bracket ensures proper physical installation and electrical contact with the CPU heat spreader.
Support CPU Power up to 95 Watts
The heatsink is rated to handle CPU power draw up to 95 watts. This thermal limit indicates the cooling capacity for processors within this power envelope. You should ensure your CPU does not exceed this wattage for optimal performance. Comparing this to other air coolers, this rating helps you select a unit that matches your processor's thermal design power.
Design and Build Overview
The Dynatron R13 is constructed from Copper1100 material using a skiving fin process. This manufacturing method creates thin, uniform fins directly from the base metal. According to the listing, this approach maximizes surface area for heat transfer while maintaining structural integrity. The alloy frame blower housing encloses the fan assembly. It includes PWM function support, allowing your system to adjust fan speeds based on thermal load. This control mechanism helps balance cooling performance against acoustic output in a server environment.
The unit is designed for 1U server heights, measuring 1.1 inches tall. Its footprint is 3.15 inches wide by 4.06 inches long. This compact size ensures it fits within standard rack-mounted chassis without obstructing adjacent slots. The heatsink weighs 1.04 pounds. This weight is managed through a captive mounting system. This design secures the heatsink directly to the motherboard, reducing stress on the CPU socket during vibration or movement. It is compatible with Intel Socket 2011 using narrow ILM.
The listing notes that Shin-Etsu G751 thermal grease is pre-printed on the base. This eliminates the need for manual application before installation. The design supports CPUs with power ratings up to 95 watts. The combination of copper construction and blower airflow directs heat away from the processor and out through the server rear panel. This layout is essential for maintaining airflow integrity in dense server racks.
Setup And Daily Use Guide
Installation begins with the captive mounting system. This feature secures the heatsink directly to the motherboard without loose screws. You align the unit with the Intel Socket 2011 narrow ILM holes. The frame holds the position firmly during placement. This design simplifies the process in tight 1U server racks where space is limited. You avoid handling small fasteners that could drop into equipment. The unit weighs 1.04 pounds, which is manageable for single-handed installation in many chassis. It fits within a 3.15 by 4.06 inch area. The 1.1 inch height ensures it stays within standard rack limits. Daily operation relies on the included Shin-Etsu G751 thermal grease. It is pre-printed on the base. You do not need to apply paste manually. This reduces the risk of uneven coverage or air bubbles. The blower fan connects via a PWM header. This allows the system to adjust speed based on load. The listing states support for CPUs up to 95 watts. You should verify that your specific processor stays within this thermal envelope. The ball bearing fan offers durability for continuous server operation. Airflow moves from the blower into the chassis exhaust path. Ensure your case has adequate intake for the blower to draw cool air. The Copper1100 material transfers heat efficiently. You benefit from stable temperatures under the specified load. The skiving fin design maintains structural integrity. This reduces vibration during high fan speeds. The setup is straightforward if you follow the captive mount instructions. Regular maintenance involves checking fan bearings and clearing dust from the fins. The pre-applied grease lasts for several years under normal conditions.
Before You Buy This Heatsink
You need to verify your server chassis has enough clearance for a 1.1-inch tall unit. The Dynatron R13 is a blower style cooler, so ensure your case has proper exhaust airflow to move the heated air out. This design relies on forced air rather than passive cooling. Check that your motherboard supports Intel Socket 2011 with narrow ILM mounting. The listing states it supports CPUs up to 95 watts. If your processor draws more power, this unit may not suffice. You should also confirm that your system fans can drive the PWM blower effectively. This product fits into a niche of compact, high-density server cooling. It differs from standard tower coolers by its low profile and directed airflow. Consider it if space is your primary constraint. Keep the pre-printed Shin-Etsu G751 thermal grease in mind for initial setup. Regular cleaning of the fins will maintain performance over time.
Check before you buy
- Verify 1U chassis clearance allows 1.1-inch height
- Confirm Intel Socket 2011 narrow ILM compatibility
- Ensure CPU power draw stays under 95 watts
- Check case exhaust airflow supports blower design
The product at a glance
Dynatron 1U Copper Blower Heatsink
Best for: 1U server builds with Intel LGA 2011 narrow ILM
- Socket Compatibility
- Intel Socket 2011 (Narrow ILM)
- Material
- Copper1100
- Server Height
- 1U
- Mounting Type
- Captive Mounting
- Dimensions
- 4.06 × 3.15 × 1.1 inches
- Weight
- 1.04 pounds
View on Amazon: Dynatron 1U Copper Blower Heatsink Affiliate link
The Dynatron R13 is a 1U server-grade air cooler built for Intel LGA 2011 narrow ILM sockets. It uses a Copper 1100 heat sink with skiving fins to manage heat. The unit includes a PWM-controlled ball bearing blower fan. It supports CPUs up to 95 watts and comes with Shin-Etsu G751 thermal grease already applied. This compact design fits specific rack-mounted or small-form-factor server builds.
Pros
- Copper 1100 heat sink with skiving fins
- PWM-controlled ball bearing blower fan
- Pre-printed Shin-Etsu G751 thermal grease
- Captive mounting for easy installation
Cons
- Limited to 95W CPU power support
- Only compatible with Intel LGA 2011 narrow ILM
- Blower design directs air toward case exhaust
Good fit if
- You are building a 1U server chassis
- You use an Intel LGA 2011 narrow ILM socket
- You need a low-profile cooling solution
Skip if
- You use a standard desktop ATX case
- You have a CPU exceeding 95W TDP
- You need compatibility with modern AM5 or LGA 1700 sockets
Verdict: The Dynatron R13 1U Copper Blower is a specialized cooler for 1U server builds using Intel LGA 2011 narrow ILM sockets. It fits users who need low-profile cooling for 95W processors in rack-mounted environments.
Specifications side by side
| Spec | Dynatron 1U Copper Blower Heatsink |
|---|---|
| Socket Compatibility | Intel Socket 2011 (Narrow ILM) |
| Material | Copper1100 |
| Server Height | 1U |
| Mounting Type | Captive Mounting |
| Dimensions | 4.06 × 3.15 × 1.1 inches |
| Weight | 1.04 pounds |
| Model | R13 |
Frequently asked questions
Does the Dynatron 1U Copper Blower Heatsink support LGA 2066 sockets?
No, this cooler is designed specifically for Intel LGA 2011 narrow ILM sockets. The product data lists LGA 2011 as its sole socket compatibility. You must verify your motherboard uses this specific socket type before purchasing. It will not fit other socket variants without adapters, which are not mentioned.
What is the maximum CPU TDP this heatsink can handle?
The Dynatron R13 is rated for 95W processors. This thermal design power limit applies to CPUs installed in 1U server builds. Exceeding this wattage may lead to insufficient cooling in a low-profile chassis. Ensure your processor’s TDP does not exceed this specification for reliable operation.
How much clearance do I need above the CPU socket?
You need 1.1 inches of vertical clearance. The unit’s height is exactly 1.1 inches, fitting standard 1U rack spaces. Measure your server chassis interior to confirm this space is available. Any RAM or components taller than this height will prevent proper installation.
Is the Dynatron R13 compatible with wide ILM mounting systems?
The listing specifies compatibility with Intel LGA 2011 narrow ILM. It does not mention support for wide ILM configurations. You should check your motherboard’s mounting bracket type. Using a narrow ILM cooler on a wide ILM socket may result in improper contact or physical interference.
What material is used for the base and fins?
The heatsink is constructed from Copper1100. This material is used for both the base and the skived fins. Copper offers high thermal conductivity, moving heat away from the CPU efficiently. This material choice helps maintain lower temperatures compared to aluminum alternatives in compact form factors.
Does this cooler include a fan or is it passive?
The product is described as a blower heatsink, which implies it requires airflow. While the data does not list a specific fan model, blower designs typically integrate a fan to push air through the fins. You must ensure your case provides adequate exhaust airflow to move heated air out of the enclosure.
What are the physical dimensions of the Dynatron R13?
The unit measures 3.15 inches in width and 4.06 inches in length. Its height is 1.1 inches, and it weighs 1.04 pounds. These dimensions define its footprint on the motherboard. Verify that your server board has sufficient space around the CPU socket for this specific footprint.