Dynatron 1U Active Copper Heatsink or Dynatron 1U Copper Blower Heatsink? Which Dynatron Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are looking at the dynatron copper heatsink k199 intel vs r13 copper heatsink 2. Both units are 1U active copper coolers designed for server environments. They share a focus on compact form factors and reliable airflow. The main difference lies in their target sockets. The K199 supports LGA1155 and LGA1156 processors. The R13 is built for the larger LGA2011 socket. You must choose based on your specific CPU socket type.
Key differences
| Aspect | Dynatron 1U Active Copper Heatsink | Dynatron 1U Copper Blower Heatsink |
|---|---|---|
| Socket Compatibility | LGA1155, LGA1156 | LGA2011 (Narrow ILM) |
| Dimensions | 5 x 5 x 2.5 inches | 3.15 x 4.06 x 1.1 inches |
| Weight | 15.2 ounces | 1.04 pounds |
| Fan Control | not listed | PWM Function |
Which one should you choose?
Choose Dynatron 1U Active Copper Heatsink if
- You need a cooler for LGA1155 or LGA1156 sockets
- You require a wider heatsink base for better surface contact
- You prefer a lighter unit for easier handling
Choose Dynatron 1U Copper Blower Heatsink if
- You are using an LGA2011 processor
- You want PWM fan speed control for better noise management
- You need a lower profile heatsink for tight 1U cases
Verdict: The K199 is the correct choice for older LGA1155 and LGA1156 platforms. The R13 is necessary for LGA2011 systems. Match your socket to avoid compatibility issues.
Socket and Size Comparison
Socket Compatibility
The Dynatron K199 supports Intel LGA1155 and LGA1156 sockets. It is designed for Sandy Bridge Xeon, Core i3, i5, and i7 processors. The Dynatron R13 targets Intel Socket 2011 with Narrow ILM. This means the R13 fits newer server platforms, while the K199 is for older generations. You must match the cooler to your motherboard socket. They do not share compatibility. If you have a Socket 2011 board, the K199 will not fit. If you have LGA1156, the R13 is incompatible. Choose based on your specific CPU socket type.
Physical Dimensions
Size matters in 1U servers. The Dynatron K199 measures 5 inches by 5 inches by 2.5 inches. It is wider and taller. The Dynatron R13 measures 3.15 inches by 4.06 inches by 1.1 inches. The R13 is significantly shorter and narrower. This compact footprint allows it to fit in tighter chassis spaces. The K199 requires more vertical clearance. You need to measure your server rack space carefully. The R13 offers a smaller profile for dense deployments. The K199 needs more room around the CPU area.
Material Construction
Both coolers use copper for heat dissipation. The Dynatron K199 is listed simply as copper material. The Dynatron R13 specifies Copper1100 with skiving fins. Skiving is a manufacturing process that creates fins from a single block of metal. This can improve thermal contact and durability. The R13 also uses an alloy frame for the blower. The K199 does not specify frame material. Copper1100 is a high-purity copper grade. This suggests the R13 may have superior heat transfer efficiency due to its specific construction method and material grade.
Weight and Mass
Weight affects installation and vibration resistance. The Dynatron K199 weighs 15.2 ounces. The Dynatron R13 weighs 1.04 pounds. One pound equals 16 ounces. So the R13 is heavier than the K199. The R13 is approximately 16.64 ounces. This extra mass might help dampen vibrations in high-speed fan operations. The K199 is lighter. You should consider the mounting stability in your server. Heavier coolers may require more robust mounting hardware. The difference is small but present in the specifications.
Thermal Management Features
The Dynatron R13 includes Shin-Etsu G751 thermal grease pre-printed on the base. This saves you the step of applying paste manually. It also supports CPUs up to 95 Watts. The Dynatron K199 does not list pre-applied thermal paste or a specific wattage support limit in the data. The R13 provides more complete out-of-box readiness. The 95-watt rating gives you a clear power ceiling. The K199 lacks these specific details. You may need to source thermal paste separately for the K199.
Which Dynatron Heatsink Fits Your Server
Users with LGA1155 or LGA1156 processors
The K199 is built specifically for Intel LGA1155 and LGA1156 sockets. It supports Sandy Bridge Xeon and Core i3, i5, and i7 chips. If your server uses these older socket types, this is the only compatible option. The copper base and active fan design provide necessary cooling for these specific processor families in a 1U chassis.
Owners of LGA2011 Narrow ILM systems
The R13 targets Intel Socket 2011 with Narrow ILM mounting. It features a copper 1100 heat sink with skiving fins for efficient heat transfer. The alloy frame blower includes PWM function for speed control. It supports CPUs up to 95 watts and comes with pre-printed Shin-Etsu G751 thermal grease for immediate installation.
Admins needing captive mounting security
The R13 offers convenient captive mounting, which secures the unit firmly in place. This design reduces vibration risks in high-density server racks. Combined with its 1U blower form factor, it ensures stable airflow over the CPU. The copper construction and PWM fan work together to maintain thermal stability under load.
The products compared
Dynatron 1U Active Copper Heatsink
Best for: 1U Intel LGA1155/1156 server builds
- Socket Compatibility
- LGA1155, LGA1156
- Material
- Copper
- Server Height
- 1U
- Cooling Method
- Active
- Dimensions
- 5 x 5 x 2.5 inches
- Features
- Fan
View on Amazon: Dynatron 1U Active Copper Heatsink Affiliate link
This is a 1U active copper heatsink designed for Intel LGA1155 and LGA1156 sockets. It measures 5 by 5 by 2.5 inches and weighs 15.2 ounces. The unit includes a fan for active cooling. You should choose this if you need a low-profile solution for server or workstation builds using older Intel processors. It fits standard 1U rack spaces.
Pros
- Built with copper material for heat transfer
- Compatible with LGA1155 and LGA1156 sockets
- Includes a fan for active cooling
- Fits 1U server height constraints
Cons
- Limited to older LGA1155 and LGA1156 sockets
- No mention of fan speed control settings
- Heavier at 15.2 ounces than some aluminum alternatives
Good fit if
- You are building a 1U server or workstation
- You use an Intel LGA1155 or LGA1156 processor
- You need a compact active cooling solution
Skip if
- You use a modern socket like LGA1700 or AM5
- You require a silent passive cooling design
- You need support for high-TDP gaming CPUs
Verdict: Dynatron 1U Copper Heatsink for Intel 1155/1156 is a specialized cooler for older Intel platforms. It fits users who need a low-profile active solution for LGA1155 or LGA1156 processors in 1U chassis.
Dynatron 1U Copper Blower Heatsink
Best for: LGA 2011 narrow ILM 1U servers
- Socket Compatibility
- Intel Socket 2011 (Narrow ILM)
- Material
- Copper1100
- Server Height
- 1U
- Mounting Type
- Captive Mounting
- Dimensions
- 4.06 × 3.15 × 1.1 inches
- Weight
- 1.04 pounds
View on Amazon: Dynatron 1U Copper Blower Heatsink Affiliate link
This Dynatron R13 is a 1U active copper heatsink designed for Intel Socket 2011 with narrow ILM. It uses a Copper1100 block with skiving fins and includes an alloy frame blower with PWM function. The unit supports CPUs up to 95 watts and comes with Shin-Etsu G751 thermal grease pre-printed. Its captive mounting system simplifies installation in server chassis.
Pros
- Copper1100 heat sink with skiving fins
- Alloy frame blower with PWM function
- Shin-Etsu G751 thermal grease pre-printed
- Captive mounting for easy installation
- Supports CPU power up to 95 watts
Cons
- Limited to Intel Socket 2011 (Narrow ILM)
- Max support is 95 watts TDP
- Blower design restricts airflow direction
Good fit if
- You need a 1U cooler for LGA 2011 narrow ILM
- You want pre-applied thermal grease
- Your CPU TDP is 95 watts or less
Skip if
- You use a different socket type
- Your CPU exceeds 95 watts TDP
- You require a standard tower cooler
Verdict: Dynatron 1U Copper Blower Heatsink is a precise fit for LGA 2011 narrow ILM servers needing a 1U solution under 95 watts.
Specifications side by side
| Spec | Dynatron 1U Active Copper Heatsink | Dynatron 1U Copper Blower Heatsink |
|---|---|---|
| Socket Compatibility | LGA1155, LGA1156 | Intel Socket 2011 (Narrow ILM) |
| Material | Copper | Copper1100 |
| Server Height | 1U | 1U |
| Cooling Method | Active | not stated |
| Dimensions | 5 x 5 x 2.5 inches | not stated |
| Mounting Type | not stated | Captive Mounting |
| Features | Fan | not stated |
| Weight | 15.2 ounces | 1.04 pounds |
| Model | K199 | R13 |
Frequently asked questions
What is the difference between the Dynatron K199 and R13?
The primary difference is socket compatibility. The K199 supports LGA1155 and LGA1156 sockets for older Intel platforms. The R13 is designed for LGA2011 narrow ILM sockets. Both are 1U copper heatsinks, but they fit different generations of server processors. Choose the K199 for Sandy Bridge chips and the R13 for newer Xeon E5 models.
Does the Dynatron K199 fit LGA2011 motherboards?
No, it does not. The K199 is built specifically for LGA1155 and LGA1156 sockets. It is intended for older Intel Core i3, i5, i7, and Xeon processors. If you have an LGA2011 board, you need the R13 model instead. Using the wrong cooler can cause mounting issues and poor thermal performance.
Is the Dynatron R13 suitable for high TDP CPUs?
The R13 is designed for LGA2011 narrow ILM servers with thermal designs under 95 watts. It is a compact 1U blower solution. If your processor exceeds 95 watts, this heatsink may not provide adequate cooling. Check your CPU specifications to ensure it stays within this power limit for reliable operation in a server chassis.
What are the dimensions of the Dynatron K199?
The K199 measures five inches in width and length. Its height is 2.5 inches, and it weighs 15.2 ounces. These dimensions allow it to fit into standard 1U server racks. Ensure your chassis has enough vertical clearance for the 2.5-inch height before installation to avoid physical conflicts with surrounding components.
How tall is the Dynatron R13 heatsink?
The R13 has a height of 1.1 inches. This low profile is critical for 1U server environments where space is extremely limited. Its width is 3.15 inches, and the length is 4.06 inches. The total weight is 1.04 pounds. These precise measurements ensure it fits narrow ILM socket layouts without obstruction.
Does the Dynatron K199 include a fan?
Yes, the K199 is an active heatsink that includes a fan. It relies on forced airflow to dissipate heat from the copper base. This active cooling is necessary for the compact 1U form factor. Ensure your server chassis provides adequate intake airflow to support the fan's operation and maintain optimal temperatures.
Can I use the R13 on LGA1156 processors?
No, the R13 is not compatible with LGA1156. It is strictly designed for the LGA2011 socket with narrow ILM. The mounting holes and physical layout differ significantly between these sockets. Using it on an LGA1156 board will result in improper fitment. Select the K199 for LGA1156 compatibility instead.