Looking Beyond the Dynatron 1U Passive Copper Heatsink? 6 Alternatives Worth a Look

Latest update: October 28, 2026

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The Dynatron 1U Passive Copper Heatsink is a specialized component for AMD EPYC SP3 systems. You might look for dynatron a25 1u passive copper alternatives if you need a different socket, height, or cooling method. This original unit uses Copper 1100 with skived fins and includes pre-printed Shin-Etsu 7762 thermal grease. It fits strictly within 1U server chassis and supports only the SP3 socket.

Some users require support for Intel LGA 2011 or AMD Ryzen AM4 processors instead. Others may need a 2U form factor or a vapor chamber for higher heat dissipation. This list includes 6 options selected because their specifications overlap with the original design. The alternatives cover various server heights, materials, and compatible sockets. You can compare dimensions, weights, and cooling methods to find the right fit for your specific build requirements.

How alternatives differ from the Dynatron A25

Dynatron 1U Copper Vapor Chamber Server Heatsink

The Dynatron A28 uses a vapor chamber instead of skived copper fins. This design choice improves heat transfer efficiency while keeping the 1U profile. It remains compatible with the AMD EPYC SP3 socket, so it fits the same systems. The dimensions are slightly larger at 3.2 by 4.7 inches, and it weighs just over one pound. You should choose this if your server chassis has adequate airflow but requires higher thermal performance than standard skived fins can provide. It maintains the passive cooling requirement without adding fans.

SilverStone 1U Passive Copper Server Heatsink

This SilverStone unit targets Intel LGA 2011 and LGA 2066 sockets, not AMD SP3. You must verify your CPU socket before considering this option. It is a passive copper heatsink designed for 1U servers. The dimensions are 3.54 by 3.54 inches with a height of 1.02 inches. It weighs 1.08 pounds. This alternative is suitable if you are building an Intel-based 1U server and need a low-profile, fanless solution. It differs from the original by supporting a completely different processor architecture and socket type.

MITXPC Threadripper EPYC Passive 2U Heatsink

The MITXPC heatsink supports 2U chassis height, offering more vertical space than the 1U original. It fits AMD Threadripper and EPYC SP3 sockets. The dimensions are 3.15 by 4.45 inches with a height of 2.52 inches. This extra height allows for more fin surface area, potentially improving passive cooling capacity. It is designed for systems where 2U clearance is available. You should pick this if you need passive cooling for higher TDP CPUs and have a 2U server rack. It sacrifices the compact 1U form factor for increased thermal mass.

Dynatron 1U AM4 Copper Passive Heatsink

This Dynatron A37 is designed for AMD Ryzen AM4 sockets, not SP3. It maintains the 1U height and copper material construction. The dimensions are 3 by 5 inches, making it longer than the original A25. It is a passive heatsink intended for 1U server builds using AM4 processors. You should consider this if your system uses an AM4 CPU and requires a silent, low-profile cooling solution. It differs from the original by supporting a different socket generation and processor family while keeping the same passive cooling approach.

Dynatron 1U AMD SP3 Liquid Cooler

The Dynatron L29 is a liquid cooler, not a passive air heatsink. It supports AMD SP3 sockets and fits 1U racks. The dimensions are 2.5 by 10 inches with a height of 12 inches. It is designed to handle loads up to 280 watts, which passive copper units cannot manage. You should choose this if your AMD EPYC CPU generates too much heat for passive dissipation. It requires a liquid cooling loop and pumps, differing significantly from the original fanless, copper-only design.

Supermicro 1U Passive Server Heatsink

The Supermicro SNK-P0037P supports Intel LGA1366 sockets, not AMD SP3. It is a passive heatsink for 1U servers. The dimensions are 25 by 3.6 inches with a height of 3.6 inches, making it much larger than the original. It weighs 12.8 ounces. This unit is intended for dual-processor or 10-blade server configurations. You should pick this if you are building an Intel LGA1366 server and need a specialized passive cooling solution. It differs by supporting a different socket and having a significantly different physical footprint.

Quick picks

#	Product	Best for	Price
1	Dynatron 1U Passive Copper Heatsink Best overall	AMD EPYC SP3 1U passive cooling	Check price of Dynatron 1U Passive Copper Heatsink on Amazon
2	Dynatron 1U Copper Vapor Chamber Server Heatsink Also great	AMD EPYC SP3 1U server builds	Check price of Dynatron 1U Copper Vapor Chamber Server Heatsink on Amazon
3	SilverStone 1U Passive Copper Server Heatsink Also great	Intel LGA 2011/2066 1U servers	Check price of SilverStone 1U Passive Copper Server Heatsink on Amazon
4	MITXPC Threadripper EPYC Passive 2U Heatsink Best 2u	2U AMD Threadripper and EPYC servers	Check price of MITXPC Threadripper EPYC Passive 2U Heatsink on Amazon
5	Dynatron 1U AM4 Copper Passive Heatsink Best am4	1U AMD Ryzen AM4 server builds	Check price of Dynatron 1U AM4 Copper Passive Heatsink on Amazon
6	Dynatron 1U AMD SP3 Liquid Cooler Best premium	High TDP AMD server CPUs in 1U racks	Check price of Dynatron 1U AMD SP3 Liquid Cooler on Amazon
7	Supermicro 1U Passive Server Heatsink Best budget	1U server builds with Intel LGA1366 CPUs	Check price of Supermicro 1U Passive Server Heatsink on Amazon

Our 7 picks

Best overall

Dynatron 1U Passive Copper Heatsink

Best for: AMD EPYC SP3 1U passive cooling

Socket Compatibility: SP3
Material: Copper 1100
Server Height: 1U
Cooling Method: Passive
Compatible Device: AMD EPYC
Dimensions: 4.4 × 3 × 1 inches

View on Amazon: Dynatron 1U Passive Copper Heatsink Affiliate link

The Dynatron A25 is a 1U passive copper heatsink built for AMD EPYC SP3 sockets. It uses Copper 1100 with skived fins to maximize surface area. The unit measures 3 by 4.4 inches and weighs 1.3 pounds. Shin-Etsu 7762 thermal grease is pre-printed for immediate installation. This design suits server racks where airflow comes from external fans.

Pros

Copper 1100 material for high thermal conductivity
Skived fin construction for dense surface area
Shin-Etsu 7762 thermal grease pre-applied
Fits 1U server chassis height constraints

Cons

Passive cooling requires strong external airflow
Limited to AMD EPYC SP3 socket only
No fan included with the heatsink

Good fit if

You need a passive solution for AMD EPYC SP3
You have a 1U server chassis with adequate airflow
You want pre-applied thermal grease for easy setup

Skip if

You use Intel or other AMD sockets
You need active cooling without case fans
You require a taller heatsink for better heat dissipation

Verdict: Dynatron A25 1U Passive Copper is a specialized heatsink for AMD EPYC SP3 systems. It fits users who need a low-profile passive cooler with pre-applied thermal compound.

Also great

Dynatron 1U Copper Vapor Chamber Server Heatsink

Best for: AMD EPYC SP3 1U server builds

Socket Compatibility: SP3
Material: Copper 1100 with Skiving Fin
Server Height: 1U
Compatible Device: AMD EPYC
Dimensions: 120 x 82 x 27 mm
System Type: Server

View on Amazon: Dynatron 1U Copper Vapor Chamber Server Heatsink Affiliate link

This Dynatron A28 is a 1U passive copper heatsink designed for AMD EPYC processors on the SP3 socket. It measures 120 x 82 x 27 mm and weighs 1.01 pounds. The base uses a vapor chamber with skived fins for efficient heat transfer. It fits standard 1U server chassis. You need this if you require a low-profile solution for high-end server CPUs without active fans.

Pros

Vapor chamber base for improved thermal conductivity
Copper 1100 material with skived fins
Compact 27 mm height for 1U systems
Specifically designed for AMD EPYC SP3 socket

Cons

Limited to AMD EPYC SP3 socket only
Passive design requires strong case airflow
No included mounting hardware or thermal paste

Good fit if

You are building a 1U server with AMD EPYC
You need a low-profile cooling solution
You have adequate case airflow for passive cooling

Skip if

You use Intel processors or other AMD sockets
You need active fan cooling for high TDP
You require a cooler taller than 27 mm

Verdict: Dynatron A28 SP3 Copper 1U Heatsink is a specialized passive cooler for AMD EPYC SP3 systems. It suits users who need a low-profile, fanless solution for 1U server builds with sufficient airflow.

Also great

SilverStone 1U Passive Copper Server Heatsink

Best for: Intel LGA 2011/2066 1U servers

Socket Compatibility: LGA2011/2066
Material: Copper skived-fin and copper base
Server Height: 1U
Cooling Method: Passive
System Type: Server
Dimensions: 3.54 × 3.54 × 1.02 inches

View on Amazon: SilverStone 1U Passive Copper Server Heatsink Affiliate link

This SilverStone cooler is a 26mm tall passive unit built for 1U rackmount servers. It uses a copper skived-fin design with a copper base for heat dissipation. It supports Intel LGA 2011 and LGA 2066 sockets. The compact 3.54-inch square footprint fits tight server chassis. You need active case airflow to use it effectively.

Pros

Copper skived-fin construction
Copper base material
Supports LGA 2011 and LGA 2066
26mm low profile height

Cons

Passive cooling requires strong case fans
Limited to Intel sockets only
No included fan or mounting hardware

Good fit if

You run an Intel LGA 2011 or LGA 2066 server
You need a 1U low-profile heatsink
You have high airflow in your chassis

Skip if

You use an AMD processor
You need a cooler with included fans
You want active cooling without case airflow

Verdict: SilverStone 1U Passive Copper LGA 2011 fits Intel LGA 2011 and LGA 2066 servers needing a low-profile passive solution. It works best in high-airflow 1U chassis.

Best 2u

MITXPC Threadripper EPYC Passive 2U Heatsink

Best for: 2U AMD Threadripper and EPYC servers

Socket Compatibility: sTRX4, TR4, SP3
Material: Aluminum, Heatpipes
Server Height: 2U
Cooling Method: Passive
Dimensions: 4.45" x 3.15" x 2.52"
System Type: Server

View on Amazon: MITXPC Threadripper EPYC Passive 2U Heatsink Affiliate link

This is a passive 2U server heatsink for AMD Threadripper and EPYC processors. It handles up to 180 watts of heat dissipation using aluminum stacked fins and heatpipes. The unit measures 4.45 by 3.15 by 2.52 inches. It comes with pre-applied Shin-Etsu 7762 thermal paste. You need this if you are building a 2U server chassis for high-end AMD platforms.

Pros

Supports AMD Threadripper sTRX4, TR4 and EPYC SP3 sockets
Handles up to 180 watts heat dissipation
Uses aluminum base and stacked fins with heatpipes
Includes pre-applied Shin-Etsu 7762 thermal paste

Cons

Limited to 180 watts TDP support
Requires a 2U chassis slot
Aluminum construction may have lower thermal mass than copper

Good fit if

You need a passive cooler for AMD Threadripper or EPYC
You are building a 2U server chassis
You want pre-applied thermal paste

Skip if

You are using an Intel socket
You need active fan cooling
You have a 1U chassis

Verdict: Dynatron A34 2U Passive Server Heatsink fits users building 2U AMD Threadripper or EPYC servers who need passive cooling up to 180 watts. It provides a complete solution with pre-applied paste for straightforward installation.

Best am4