Dynatron 2U Active Server CPU Cooler vs Dynatron Q3 Intel 1700 1U CPU Cooler: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This comparison examines the dynatron 2u active server CPU cooler vs q3 intel 1700 1u CPU cooler. Both units are active cooling solutions designed for server environments. The primary distinction lies in their form factor and target socket. One unit supports older LGA 115X and 1200 platforms with a standard 2U height. The other is built specifically for modern LGA 1700 processors in a compact 1U chassis. You need to match the cooler to your motherboard socket and case height.
Key differences
| Aspect | Dynatron 2U Active Server CPU Cooler | Dynatron Q3 1U LGA1700 Cooler |
|---|---|---|
| Socket Compatibility | LGA 115X, LGA 1200 | LGA 1700 |
| Server Height | 2U | 1U |
| Cooling Technology | Copper base with aluminum fins and heat pipes | Copper heatsink with skiving fins |
| Dimensions | 94.0 x 87.5 x 67.7 mm | 3.54 x 1.1 x 3.62 inches |
| Bearing Type | 2 Ball Bearing | not listed |
Which one should you choose?
Choose Dynatron 2U Active Server CPU Cooler if
- You use an LGA 115X or LGA 1200 socket motherboard
- Your server chassis allows for a standard 2U height
- You prefer a cooler with explicitly listed ball bearing durability
Choose Dynatron Q3 1U LGA1700 Cooler if
- You are installing an Intel Alder Lake processor on LGA 1700
- Your server case is limited to a 1U height constraint
- You need a cooler specifically rated for 125W TDP in a 1U form factor
Verdict: Select the Dynatron 2U Active Server CPU Cooler if you are working with older LGA 115X or 1200 sockets and have a 2U chassis. Choose the Dynatron Q3 if you require support for modern LGA 1700 processors and are constrained by a 1U server height limit.
Server Cooler Spec Breakdown
Socket Compatibility
The Dynatron 2U Active Server CPU Cooler supports LGA 115X and LGA 1200 sockets. This makes it suitable for older Intel platforms and mainstream desktop processors that use these legacy interfaces. In contrast, the Dynatron Q3 Intel 1700 1U CPU Cooler is built specifically for the LGA 1700 socket. This newer interface is standard for recent Intel Alder Lake and later processors. If you are upgrading to a modern CPU, the Q3 is the only option that fits your motherboard. The 2U cooler will not physically attach to an LGA 1700 board.
Server Height
Form factor dictates where you can install the hardware. The Dynatron 2U Active Server CPU Cooler is designed for 2U server chassis or larger enclosures. Its height allows for more surface area and potentially better airflow in spacious cases. The Dynatron Q3 Intel 1700 1U CPU Cooler is a 1U solution. It is extremely low profile, fitting into tight 1U server racks or small form factor systems where height is restricted. Choose the 2U model if you have vertical clearance. Pick the Q3 if your case height is limited to one unit.
Cooling Method
Both units use active cooling, meaning they rely on fans to move air across the heatsink. The Dynatron 2U Active Server CPU Cooler features a copper base with aluminum fins and embedded heat pipes. This hybrid design helps transfer heat from the CPU to the fins efficiently. The Dynatron Q3 Intel 1700 1U CPU Cooler uses a copper heatsink with skiving fins. Skiving is a manufacturing process that creates fins from a single block of metal, often improving thermal contact. Both methods are effective, but the materials differ slightly in construction approach.
Build Material
Material choice affects thermal performance and weight. The Dynatron 2U Active Server CPU Cooler combines copper and aluminum. It has a copper base for direct heat absorption and aluminum fins for lightweight dissipation. Heat pipes are embedded to spread heat evenly. The Dynatron Q3 Intel 1700 1U CPU Cooler uses a copper heatsink with skiving fins. Copper conducts heat better than aluminum, which is beneficial for the dense fin structure of a 1U cooler. The Q3 may offer slightly better thermal conductivity in its core, while the 2U model uses aluminum to reduce overall weight.
Dimensions
Physical size impacts airflow and case compatibility. The Dynatron 2U Active Server CPU Cooler measures approximately 94.0 x 87.5 x 67.7mm. This larger footprint allows for more fins and better air dispersion. The Dynatron Q3 Intel 1700 1U CPU Cooler is much smaller, with dimensions around 3.54 x 1.1 x 3.62 inches. The Q3 is nearly an inch tall, fitting into very low profiles. The 2U cooler is over twice as tall. If you need maximum cooling capacity and have space, the 2U model is larger. If you need to fit into a tight rack, the Q3 is the compact choice.
TDP Support
Thermal Design Power determines how much heat the cooler can handle. The Dynatron Q3 Intel 1700 1U CPU Cooler is rated to dissipate up to 125 Watts of CPU power. This is suitable for high-performance modern processors that generate significant heat. The Dynatron 2U Active Server CPU Cooler does not list a specific wattage rating in the provided data. Without this number, it is hard to compare thermal headroom directly. The Q3 has a clear advantage here because you know it handles 125W. For the 2U cooler, you would need to check the manufacturer's full datasheet for TDP limits.
Which dynatron cooler fits your server
Older Intel platform users needing 2U space
You need a cooler for LGA 115X or LGA 1200 sockets. This unit supports those legacy interfaces. It fits in 2U server chassis. The copper base and aluminum fins with embedded heat pipes provide active cooling. The dual ball bearing ensures long term reliability for your existing hardware setup.
Modern Intel 1700 users with tight 1U cases
You are using an Intel Alder Lake S processor on an LGA 1700 socket. This cooler is designed specifically for that socket. It fits in low profile 1U server solutions. The copper heatsink with skiving fins supports up to 125 watts of heat dissipation. This matches modern CPU power requirements.
Users requiring maximum height clearance for cooling
You have a 2U server chassis and need more vertical space for heat transfer. This cooler is significantly taller than the 1U alternative. The larger volume allows for more effective heat dissipation. The active cooling method combined with the larger surface area helps manage thermal loads in standard rack servers efficiently.
The products compared
Dynatron 2U Active Server CPU Cooler
Best for: 2U server builds with LGA 115X/1200
- Socket Compatibility
- LGA 115X, LGA 1200
- Server Height
- 2U
- Cooling Method
- Active
- Material
- Copper, Aluminum
- Dimensions
- 6 × 6 × 6 inches
View on Amazon: Dynatron 2U Active Server CPU Cooler Affiliate link
The Dynatron K555 is an active server cooler designed for 2U chassis. It features a copper base with aluminum fins and embedded heat pipes. The unit supports LGA 115X and LGA 1200 sockets. It uses a dual ball bearing fan for durability. This cooler suits users needing reliable airflow in tight server environments.
Pros
- Copper base with aluminum fins and heat pipes
- Dual ball bearing fan for longevity
- Supports LGA 115X and LGA 1200 sockets
- Fits 2U server chassis
Cons
- Limited to LGA 115X and LGA 1200 sockets
- Specific 2U form factor restricts case compatibility
- No mention of noise level specifications
Good fit if
- You are building a 2U server chassis
- You need support for LGA 115X or LGA 1200 sockets
- You require a copper base for efficient heat transfer
Skip if
- You are using a socket outside the LGA 115X or LGA 1200 range
- You are building a standard desktop PC with limited height clearance
- You need a cooler for modern LGA 1700 sockets
Verdict: Dynatron K555 2U Active Server Cooler is a specialized solution for 2U server builds using LGA 115X or LGA 1200 sockets. It offers solid thermal materials but lacks socket versatility for newer platforms.
Dynatron Q3 1U LGA1700 Cooler
Best for: 1U server builds with LGA 1700 CPUs
- Socket Compatibility
- LGA 1700
- Cooler Height
- 1.1 inches
- TDP Rating
- 125 Watts
- Server Height
- 1U
- Dimensions
- 3.62 × 3.54 × 1.1 inches
View on Amazon: Dynatron Q3 1U LGA1700 Cooler Affiliate link
The Dynatron Q3 is a 1U server CPU cooler designed for Intel Alder Lake S processors on LGA 1700 sockets. It features a copper heatsink with skiving fins to dissipate up to 125 watts of heat. Measuring 3.54 by 3.62 by 1.1 inches, it fits low-profile server racks. You should choose this if you need a compact, high-efficiency cooling solution for 1U chassis environments.
Pros
- Supports Intel LGA 1700 socket
- Copper heatsink with skiving fins
- Handles 125W TDP
- Low 1U profile height
Cons
- Limited to 1U chassis compatibility
- Only supports LGA 1700 socket
- No fan speed control mentioned
Good fit if
- You use a 1U server chassis
- You run an Intel LGA 1700 CPU
- You need a 125W TDP cooler
Skip if
- You need a desktop tower cooler
- You use a non-LGA 1700 socket
- You require RGB lighting
Verdict: Dynatron Q3 1U LGA 1700 Cooler fits 1U server builds with LGA 1700 processors needing 125W cooling.
Specifications side by side
| Spec | Dynatron 2U Active Server CPU Cooler | Dynatron Q3 1U LGA1700 Cooler |
|---|---|---|
| Socket Compatibility | LGA 115X, LGA 1200 | LGA 1700 |
| Cooler Height | not stated | 1.1 inches |
| TDP Rating | not stated | 125 Watts |
| Server Height | 2U | 1U |
| Cooling Method | Active | not stated |
| Material | Copper, Aluminum | not stated |
| Dimensions | 6 × 6 × 6 inches | 3.62 × 3.54 × 1.1 inches |
| Model | K555 | 840556074731 |
Frequently asked questions
Can the Dynatron 2U Active Server CPU Cooler fit in a 1U server chassis?
No, it cannot. This cooler is designed specifically for 2U server builds. Its physical dimensions are six inches wide, six inches long, and six inches high. A 1U chassis does not have the vertical clearance required for this unit. You must choose a 1U compatible model for smaller server cases.
Does the Dynatron Q3 support LGA 1200 sockets?
No, it does not. The Dynatron Q3 is built for LGA 1700 processors. If your system uses an LGA 1200 socket, this cooler will not mount correctly. You need a cooler that explicitly lists LGA 1200 compatibility, such as the Dynatron 2U Active Server model, to ensure proper fit and function.
Which cooler is better for an LGA 1700 processor?
The Dynatron Q3 is the correct choice. It is explicitly designed for LGA 1700 sockets. The Dynatron 2U model only supports LGA 115X and LGA 1200 interfaces. Using the wrong cooler can lead to mounting issues or poor thermal contact. Always match the socket type exactly to your CPU.
What are the dimensions of the Dynatron Q3 1U cooler?
The Dynatron Q3 measures 3.54 inches in width, 1.1 inches in height, and 3.62 inches in length. These compact dimensions allow it to fit into tight 1U server spaces. The low profile is essential for maintaining airflow in dense server racks while providing adequate cooling for the processor.
Is the Dynatron 2U cooler made of copper or aluminum?
It uses both materials. The cooler features a copper base and aluminum fins. This combination helps dissipate heat efficiently from the CPU. The copper base conducts heat quickly, while the aluminum fins provide a large surface area for air to cool. This active cooling method ensures stable temperatures under load.
Can I use the Dynatron Q3 for a 2U server build?
It is not recommended. The Q3 is a 1U cooler with a height of only 1.1 inches. While it might physically fit, it is optimized for lower profile cases. The Dynatron 2U model is designed for 2U chassis and offers a larger surface area. Using the 2U model in a 2U case provides better thermal performance.