Coolerguys 2U LGA 1700 Vapor Alternatives: 6 Similar Picks Compared

How these alternatives compare

Dynatron 2U Active Server Cooler

The Dynatron Q5 supports 125W TDP processors, which is lower than the 200W capacity of the Coolerguys unit. It uses a standard aluminum and copper build rather than a vapor chamber. This design choice may affect heat spreading efficiency under heavy loads. The cooler measures five inches on each side, making it slightly larger than the compact 3.54-inch square base of the Coolerguys model. It weighs 1.1 pounds. You should pick this if your processor stays under 125W and you prefer traditional fin-stack materials. It fits the same 2U server height and LGA 1700 socket, ensuring direct compatibility without adapter issues.

Dynatron 2U Active Server CPU Cooler

The Dynatron K555 is designed for older Intel sockets, specifically LGA 115X and LGA 1200. It does not support LGA 1700, so it is incompatible with the Coolerguys target platform. This unit measures six inches on each side, making it significantly larger than the 3.54-inch Coolerguys cooler. It uses copper and aluminum materials for its heat sink. You should only consider this if you are upgrading an older server platform that uses LGA 1200 or similar legacy sockets. It maintains the 2U server height requirement. The larger footprint may not fit in tight chassis spaces where the Coolerguys model excels. It is a specialized solution for legacy hardware maintenance.

Dynatron A47 2U Active CPU Cooler

The Dynatron A47 supports AMD AM4 and AM5 sockets, not Intel LGA 1700. It is designed for low-power AMD processors in 2U server builds. This cooler measures 3.07 inches wide and 2.64 inches high, which is slightly narrower than the Coolerguys model. It weighs 14.1 ounces. You should pick this if you are building with AMD Threadripper or EPYC processors that use these sockets. It cannot be used with LGA 1700 CPUs. The focus is on compact form factor constraints and socket compatibility rather than high-end thermal performance for high-wattage Intel chips. It serves a different market segment entirely within the 2U space.

Dynatron 2U AMD SP3 Active CPU Cooler

The Dynatron T17 supports AMD SP3 sockets, used by Threadripper and EPYC processors. It does not support LGA 1700, making it incompatible with the Coolerguys cooler's target platform. This unit measures 3.11 inches wide and 2.6 inches high. It is designed for high TDP support in tight 2U spaces. You should pick this if you are building an AMD server platform. It is not suitable for standard desktop builds or Intel CPUs. The Coolerguys model is rated for 200W on LGA 1700, while this unit targets different thermal envelopes for AMD server chips. Socket compatibility is the primary differentiator here, not physical size or cooling method.

Dynatron 2U Active Server Cooler for Intel 7529

The Dynatron C2 supports Intel LGA 1700 sockets, specifically for the 7529 variant. It shares the 2U server height and active cooling method with the Coolerguys model. However, it measures 3.85 inches wide and 5.22 inches long, making it larger than the 3.54-inch square Coolerguys base. It weighs 1.39 pounds. This cooler suits users who value pre-applied thermal grease and easy mounting for Intel 7529 servers. It lacks the vapor chamber feature of the Coolerguys unit, which may impact peak heat dissipation. You should pick this if you are using the 7529 socket and prefer a larger footprint for potentially better airflow across a bigger surface area.

HIGH Power 28mm Low-Profile LGA1700 Cooler

The HIGH Power cooler supports LGA 1700 sockets but is designed for low-TDP desktop and ITX builds. It measures 1.1 inches high, which is much lower than the 2.58-inch Coolerguys model. This low-profile design fits small cases but cannot cool high-wattage processors effectively. The Coolerguys unit is rated for 200W, while this HIGH Power model is intended for low-power CPUs. You should pick this if you are building a small form factor desktop with a low-TDP LGA 1700 processor. It lacks the 2U server height and vapor chamber technology. It sacrifices cooling capacity for physical compactness in desktop environments.

Quick picks

Our 7 picks

1 Best overall

Coolerguys 2U LGA 1700 Vapor Chamber Cooler

Best for: 2U server builds with LGA 1700 CPUs

Socket Compatibility

LGA1700

TDP Rating

200W

Fan Speed

8000 RPM

Server Height

2U

Cooling Method

Active

Features

Vapor Chamber

View on Amazon: Coolerguys 2U LGA 1700 Vapor Chamber Cooler Affiliate link

This is a 2U active CPU cooler designed for Intel LGA 1700 sockets. It uses a vapor chamber for heat transfer and supports up to 200W TDP. The fan runs at speeds between 2600 and 8000 RPM via a 4-pin PWM connector. It measures 3.54 x 3.54 x 2.58 inches and uses a 78x78mm mounting pitch. This unit suits users needing high airflow in a compact server or workstation form factor.

Pros

• Vapor chamber cooling technology
• Supports 200W TDP
• High max fan speed of 8000 RPM
• 4-pin PWM control

Cons

• Max fan speed of 8000 RPM is very loud
• Only compatible with LGA 1700 sockets
• Ball bearing fans may wear out faster than sleeve bearings

Good fit if

• You need a 2U low-profile cooler for LGA 1700
• You require high airflow for 200W processors
• You are building a server or workstation

Skip if

• You use an AMD socket
• You need silent operation
• You have a standard ATX case

Verdict: Coolerguys 2U LGA 1700 Vapor Chamber delivers strong cooling for 200W chips in tight spaces. It fits users who prioritize airflow over noise in server builds.

2 Also great

Dynatron 2U Active Server Cooler

Best for: 125W LGA1700 2U server builds

Socket Compatibility

LGA1700

TDP Rating

125 Watts

System Type

Server

Server Height

2U

Cooling Method

Active

Dimensions

5 × 5 × 5 inches

View on Amazon: Dynatron 2U Active Server Cooler Affiliate link

The Dynatron Q5 is a 2U active CPU cooler designed for Intel LGA1700 sockets. It supports up to 125W TDP using a copper base with heat pipes and an aluminum fin stack. The unit includes a 4-pin PWM dual ball bearing fan for active cooling. It measures 5 inches on each side and weighs 1.1 pounds. This cooler suits small form factor server builds requiring reliable, low-profile thermal management.

Pros

• Supports 125W TDP for moderate loads
• Compatible with Intel LGA1700 sockets
• Uses 4-pin PWM dual ball bearing fan
• Copper base with direct contact heat pipes

Cons

• 125W TDP limit is lower than 200W competitors
• 5-inch square footprint may not fit all cases
• Aluminum fins offer less thermal mass than all-copper designs

Good fit if

• You need a 2U cooler for LGA1700
• Your CPU TDP is around 125W
• You prefer PWM fan control

Skip if

• You require cooling above 125W
• You need a larger heat sink surface
• Your case cannot accommodate 5-inch dimensions

Verdict: Dynatron Q5 LGA1700 2U 125W Cooler fits users with 125W processors who need a compact 2U solution. It trades higher wattage capacity for a standard aluminum and copper build.

3 Best lga 1200

Dynatron 2U Active Server CPU Cooler

Best for: older LGA 115X/1200 server builds

Socket Compatibility

LGA 115X, LGA 1200

Server Height

2U

Cooling Method

Active

Material

Copper, Aluminum

Dimensions

6 × 6 × 6 inches

View on Amazon: Dynatron 2U Active Server CPU Cooler Affiliate link

This is a 2U active air cooler built for LGA 115X and LGA 1200 sockets. It uses a copper base with aluminum fins and embedded heat pipes. The unit measures 94.0 x 87.5 x 67.7mm and relies on a dual ball bearing fan. It is designed for server environments or workstations that require a low-profile solution under 67.7mm in height. You should consider this if you need reliable cooling for older Intel platforms in tight spaces.

Pros

• Copper base with aluminum fins and heat pipes
• Dual ball bearing fan for durability
• Compatible with LGA 115X and LGA 1200 sockets
• Low 2U profile suitable for small form factors

Cons

• Does not support modern LGA 1700 sockets
• Limited to older Intel socket generations
• No mention of high-end thermal performance specs

Good fit if

• You use an LGA 115X or LGA 1200 processor
• You need a 2U low-profile cooler for a server
• You require a durable dual ball bearing fan

Skip if

• You have an LGA 1700 socket motherboard
• You need support for AMD sockets
• You want a cooler for modern Intel platforms

Verdict: Dynatron K555 2U Active Cooler is a specialized unit for older Intel sockets. It fits users who need a 2U solution for LGA 115X or LGA 1200 CPUs in server or workstation builds.

4 Also great

Dynatron A47 2U Active CPU Cooler

Best for: low-power AMD 2U server builds

Socket Compatibility

AM4, AM5

Cooler Height

67mm

Heat Pipes

4

Fan Size

60mm

TDP Rating

95W

Server Height

2U

View on Amazon: Dynatron A47 2U Active CPU Cooler Affiliate link

The Dynatron A47 is a 2U active air cooler designed for AMD AM4 and AM5 sockets. It features four heat pipes and an aluminum stacked fin array to manage heat. The included 60x60x25mm 4-pin PWM fan supports CPUs with up to 95 watts of TDP. Its compact 107x78x67mm footprint fits small form factor cases. This unit is built for 2U server racks or up to 2U enclosures.

Pros

• Supports AMD AM4 and AM5 sockets
• Handles up to 95W CPU heat dissipation
• Includes 60x60x25mm 4-pin PWM fan
• Uses four heat pipes with aluminum fins

Cons

• Limited to 95W TDP, lower than 200W vapor chamber alternatives
• Small 60mm fan may produce higher noise at speed
• Only supports AMD sockets, not Intel LGA1700

Good fit if

• You use an AMD AM4 or AM5 processor
• You need a 2U active cooler for a server or small case
• Your CPU TDP is 95W or less

Skip if

• You use an Intel LGA1700 socket
• Your CPU exceeds 95W TDP
• You need a vapor chamber design for higher heat loads

Verdict: Dynatron A47 2U AM4/AM5 Active Cooler is a compact solution for low-power AMD builds in 2U spaces. It fits users who prioritize socket compatibility and small form factor constraints over high-end cooling performance.

5 Best sp3

Dynatron 2U AMD SP3 Active CPU Cooler

Best for: AMD Threadripper and EPYC server builds

Socket Compatibility

sWRX8, sTRX4, TR4, SP3

Fan Size

60mm

TDP Rating

280W

Server Height

2U

Cooling Method

Active

Dimensions

4.69 × 3.11 × 2.6 inches

View on Amazon: Dynatron 2U AMD SP3 Active CPU Cooler Affiliate link

This is a Dynatron T17 active cooling solution designed for 2U server chassis. It supports AMD sockets SP3, TR4, sTRX4, and sWRX8. The unit features a 60x60x25mm PWM fan and a copper base. It handles heat loads up to 280W. Its compact 3.11 x 2.6 x 4.69 inch footprint fits tight spaces. You should choose this if you need reliable cooling for high-power Threadripper or EPYC processors in a small form factor.

Pros

• Supports AMD SP3, TR4, sTRX4, and sWRX8 sockets
• Rated for 280W TDP heat dissipation
• Includes a 60mm PWM side-blower fan
• Compact 2U form factor dimensions

Cons

• Small 60mm fan may generate higher noise levels
• Limited to AMD server/workstation sockets only
• No RGB lighting or software control features listed

Good fit if

• You are building an AMD Threadripper or EPYC workstation
• You need a 2U active cooler for a server chassis
• You require support for high TDP processors up to 280W

Skip if

• You use Intel LGA 1700 or other consumer sockets
• You prefer quiet operation with larger 80mm or 120mm fans
• You need RGB lighting or fan curve software control

Verdict: Dynatron T17 2U Server CPU Cooler is a specialized cooler for AMD server platforms. It fits users who need high TDP support in a tight 2U space. It is not suitable for standard desktop builds.

6 Best premium

Dynatron 2U Active Server Cooler for Intel 7529

Best for: 2U Intel 7529 server cooling

Socket Compatibility

Intel 7529

Cooler Height

67 mm

Server Height

2U

Cooling Method

Active

Dimensions

5.22 × 3.85 × 2.64 inches

Weight

1.39 pounds

View on Amazon: Dynatron 2U Active Server Cooler for Intel 7529 Affiliate link

The Dynatron C2 is a 2U active CPU cooler designed for Intel 7529 sockets. It measures 67 mm in height and uses a 6025 side-blow fan with PWM control. The unit features aluminum stacked fins and heat pipes for direct heat transfer. It includes pre-applied Shin-Etsu 7762 thermal grease. This cooler suits 2U rack-mounted servers needing efficient airflow without excessive bulk.

Pros

• Compact 67 mm height fits 2U chassis
• PWM-controlled 6025 side-blow fan for efficient airflow
• Aluminum stacked-fin and heat pipe construction
• Pre-applied Shin-Etsu 7762 thermal grease
• Captive screw mounting system for easy installation

Cons

• Limited to Intel 7529 socket compatibility
• Side-blow fan design restricts airflow direction options
• No mention of fan speed range or noise levels

Good fit if

• You need a 2U compatible cooler for Intel 7529
• You want pre-applied thermal grease for quick setup
• You prefer captive screw mounting for stability

Skip if

• You use AMD or other Intel sockets
• You require top-blow fan airflow
• You need detailed fan noise specifications

Verdict: Dynatron C2 2U LGA1700 Active Cooler fits 2U rack servers with Intel 7529 sockets that need compact, efficient cooling. It suits users who value pre-applied grease and easy mounting.

7 Best budget

HIGH Power 28mm Low-Profile LGA1700 Cooler

Best for: Low-TDP LGA1700 CPUs in small cases

Socket Compatibility

LGA1700

Cooler Height

28mm

Tower Design

Low-Profile

Fan Size

95mm

TDP Rating

75W

Fan Speed

1100-3500 RPM

View on Amazon: HIGH Power 28mm Low-Profile LGA1700 Cooler Affiliate link

This HIGH Power cooler is a low-profile 2U solution for LGA1700 sockets. It stands 28mm tall with a 95mm fan. The unit handles up to 75W TDP. It uses a screw-mount design with a back plate. PWM speed control ranges from 1100 to 3500 RPM. It fits small form factor cases where height is limited.

Pros

• 28mm low profile height
• 95mm fan size
• 75W TDP rating
• LGA1700 socket support
• PWM speed control

Cons

• 75W TDP limit is low for high-power CPUs
• 95mm fan is smaller than standard 120mm or 140mm options
• No vapor chamber included

Good fit if

• You need a cooler under 30mm tall
• You use an LGA1700 processor under 75W TDP
• You build in a small ITX case

Skip if

• You run a high-TDP CPU over 100W
• You require a vapor chamber design
• You need a standard 120mm or larger fan

Verdict: HIGH Power 28mm LGA1700 Low Profile Cooler is a compact option for low-power LGA1700 builds. It fits small cases but cannot cool high-wattage processors effectively.

Specifications side by side

Frequently asked questions

See also

• cooler master 360l core aio CPU alternatives
• best 200W subwoofers