Coolerguys 2U LGA 1700 Vapor Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This coolerguys 2u active vapor chamber lga1700 200w CPU cooler review focuses on a specialized cooling solution for compact server environments. It is designed specifically for the LGA 1700 socket, ensuring compatibility with modern Intel processors. The defining feature is its active vapor chamber design, which provides efficient heat transfer. It is rated for a 200W TDP, allowing it to handle high-performance chips within a strict 2U server height limit. This cooler prioritizes airflow and thermal density in constrained spaces.
What stands out
- Active vapor chamber for enhanced heat dissipation
- 200W TDP rating for high-power CPUs
- LGA 1700 socket compatibility
- PWM fan speed up to 8000 RPM
- 2U server height form factor
Who it fits
Good fit for
You should consider this cooler if you are building or upgrading a compact server or workstation that requires LGA 1700 support. It suits systems with a 2U height constraint where standard air coolers will not fit. The 200W TDP rating makes it appropriate for high-end Intel processors that generate significant heat. If you need a reliable, active cooling solution that fits into tight rack spaces, this unit provides the necessary airflow and thermal performance.
Who should skip it
Skip this option if you are building a standard desktop PC with a full-size case. This cooler is designed for server racks and requires specific 78x78mm mounting pitch compatibility, which is not common in consumer cases. The extremely high fan speed of up to 8000 RPM may generate excessive noise in a quiet office or home environment. It is not suitable for users who prioritize aesthetics or low acoustic profiles over raw cooling efficiency in a 2U chassis.
Verdict: This cooler is a functional choice for 2U server builds using LGA 1700 processors. It delivers necessary thermal performance in a compact form factor, though it lacks versatility for standard desktop cases.
Key specs explained
TDP Rating: 200W
This rating indicates the maximum heat output the cooler is designed to dissipate. You should match this to your processor's thermal design power to ensure adequate cooling. A 200W capacity suits high-performance CPUs found in modern workstations or servers. If your chip exceeds this limit, you may need a larger unit. Always verify your CPU's actual TDP before purchasing.
Socket Compatibility: LGA1700
This specifies the physical mounting interface required for installation. It ensures the cooler fits Intel processors using the LGA 1700 socket. You must verify your motherboard supports this socket type. This cooler will not fit older LGA 1200 or newer LGA 1851 boards without adapters. Check your motherboard manual to confirm the socket generation before buying.
Fan Speed: 8000 RPM
This value represents the maximum rotational speed of the fan. Higher speeds move more air but generate more noise. You will see increased airflow when the system demands maximum cooling. This speed is typical for compact server coolers where space limits fan size. Compare this to standard desktop fans that rarely exceed 3000 RPM. Expect higher noise levels at this speed.
Cooling Method: Active Vapor Chamber
This describes how heat moves from the CPU to the fins. An active vapor chamber uses liquid evaporation for rapid heat transfer, enhanced by a fan. This method spreads heat evenly across the base. You benefit from consistent temperatures under heavy loads. This is different from standard heat pipes. It offers superior thermal conductivity for dense server environments.
Design and build details
The listing describes a black vapor chamber cooler with active cooling. It measures 3.54 inches in length and width, with a height of 2.58 inches. These dimensions fit the 2U server form factor. This compact size allows it to fit in tight chassis spaces where standard tower coolers cannot. The vapor chamber design helps spread heat evenly across the base. This approach can improve contact with the CPU surface compared to traditional heat pipe arrays.
Mounting relies on a 78x78mm pitch for LGA 1700 sockets. You must ensure your motherboard or server backplate supports this specific spacing. The unit uses a 4-pin PWM connector. This allows your system to control fan speed automatically. The fan operates between 2600 and 8000 RPM. Such a wide range suggests it can run quietly at low loads and spin up quickly when heat increases. The bearing type is listed as ball bearing. This choice typically indicates longer lifespan under continuous operation, which suits server environments that run 24/7.
According to the listing, the cooler handles up to 200W of TDP. This capacity aligns with high-end workstation or server processors. The black finish is standard for internal components. It does not affect performance but matches typical hardware aesthetics. The overall build focuses on durability and space efficiency rather than visual appeal. You should verify that your case has enough clearance for the 2.58-inch height. The design prioritizes thermal output in constrained spaces.
Setup and everyday use details
You install this cooler by aligning it with the LGA 1700 socket. The unit uses a 78x78mm mounting pitch, which is standard for many server chassis. You connect the 4-pin PWM cable to your motherboard. This allows the system to control the fan speed automatically. The fan operates between 2600 and 8000 RPM. At maximum speed, it reaches 8000 RPM. This high range helps move air quickly through the vapor chamber fins. The cooler uses ball bearings for the fan shaft. This type of bearing is common in server hardware. It supports long run times and continuous operation. You do not need special software to use it. The PWM signal handles speed adjustments from the BIOS or OS. The vapor chamber spreads heat evenly across the base. This helps when your CPU spikes in temperature. The black finish matches typical server internals. It fits in 2U racks due to its 2.58 inch height. You place it directly over the CPU socket. Ensure the fan faces the case exhaust or intake based on your airflow plan. The 200W TDP rating means it handles high heat loads. You should verify your processor stays within this limit. The compact 3.54 inch square footprint saves space. This is useful in tight server enclosures. You check the connection after installation. The 4-pin connector ensures stable power delivery. Daily use involves the fan adjusting to load. It runs quietly at low speeds and louder under stress. This is normal for active cooling.
Before You Buy This Cooler
Owning this cooler requires careful planning for your server chassis. First, verify your motherboard supports the LGA 1700 socket. You must also confirm your case accommodates the 2U height and 3.54-inch width. The 78x78mm mounting pitch is specific, so check your chassis compatibility before purchasing. This unit relies on a 4-pin PWM connection. Ensure your motherboard provides this header for speed control. The ball bearing fans are designed for longevity, but you should still check for dust buildup regularly. Clean the vapor chamber fins to maintain the 200W TDP rating. This cooler fits alongside other options in CPU Air Coolers & Thermal Paste by targeting high-density environments. It is not for standard desktops. You need a specialized setup. If your rig is compact and uses Intel 12th, 13th, or 14th Gen CPUs, this is a strong candidate. For standard PC builds, look elsewhere. The active cooling and vapor chamber design handle heat well, but only in the right form factor. Always double-check your physical space constraints.
Check before you buy
- Verify LGA 1700 socket support on your motherboard.
- Confirm case fits 2U height and 3.54-inch dimensions.
- Check for 4-pin PWM header availability on board.
- Ensure chassis supports 78x78mm mounting pitch standard.
The product at a glance
Coolerguys 2U LGA 1700 Vapor Chamber Cooler
Best for: 2U server racks with LGA 1700 CPUs
- Socket Compatibility
- LGA1700
- TDP Rating
- 200W
- Fan Speed
- 8000 RPM
- Server Height
- 2U
- Cooling Method
- Active
- Features
- Vapor Chamber
View on Amazon: Coolerguys 2U LGA 1700 Vapor Chamber Cooler Affiliate link
This is an active vapor chamber cooler designed for LGA 1700 sockets. It handles up to 200W TDP with a fan speed reaching 8000 RPM. The unit uses a 78x78mm mounting pitch and a 4-pin PWM connector. You should consider it if you need high airflow in a compact 2U server height. It fits standard LGA 1700 motherboards.
Pros
- 200W TDP rating
- 8000 RPM max fan speed
- Active vapor chamber design
- LGA 1700 socket compatibility
Cons
- Very small 3.54x3.54x2.58 inch footprint
- High 8000 RPM fan speed may be loud
- Limited to 2U server height profile
Good fit if
- You need a cooler for a 2U server chassis
- You have an LGA 1700 CPU with high TDP
- You require a compact vapor chamber solution
Skip if
- You are building a standard desktop PC
- You need a quiet low-RPM fan
- You require a larger 120mm or 140mm fan
Verdict: Coolerguys 2U LGA 1700 Vapor Chamber fits users who need a high-performance, compact cooler for 2U server racks. It is not suitable for standard desktop cases due to its small size and high noise potential.
Specifications side by side
| Spec | Coolerguys 2U LGA 1700 Vapor Chamber Cooler |
|---|---|
| Socket Compatibility | LGA1700 |
| TDP Rating | 200W |
| Fan Speed | 8000 RPM |
| Server Height | 2U |
| Cooling Method | Active |
| Features | Vapor Chamber |
| Dimensions | 3.54 × 3.54 × 2.58 inches |
| Color | Black |
| Model | 840556075127 |
Frequently asked questions
Does this cooler work with standard desktop PC cases?
No, it is not suitable for standard desktop cases. The unit is designed specifically for 2U server racks. Its compact height of 2.58 inches and specific form factor do not fit typical ATX or micro-ATX desktop chassis. You need a server environment to accommodate these dimensions.
What is the maximum TDP this vapor chamber cooler supports?
It supports a maximum thermal design power of 200W. This rating indicates the heat output the active cooling system is designed to dissipate. You should match this capacity to your processor's TDP to ensure adequate cooling performance for high-performance CPUs in server applications.
Is the cooling method passive or active?
The cooling method is active. It uses a fan to move air across the vapor chamber fins. This active approach is necessary to handle the specified 200W heat load. Passive cooling would not provide sufficient airflow for this high-performance server-grade component.
What socket types are compatible with this cooler?
It is compatible only with the LGA 1700 socket. This ensures it fits modern Intel processors that use this specific mounting interface. You must verify your motherboard uses LGA 1700 before purchasing, as it will not fit older or AMD socket types.
How does the vapor chamber design improve performance?
The vapor chamber spreads heat evenly across the base. This active cooling feature enhances thermal transfer compared to traditional heat pipes. It helps maintain lower temperatures for the CPU under heavy loads, which is critical for stability in 2U server rack environments.
What are the physical dimensions of the cooler?
The cooler measures 3.54 inches in length and width, with a height of 2.58 inches. These specific dimensions are required to fit within the 2U server rack form factor. You must check your chassis clearance to ensure it fits these exact measurements.