BestParts HP EliteDesk G2 SFF Review: Who It Fits and Who Should Skip It

What stands out

• Compatible with HP EliteDesk 705, 800, and 600 G2 SFF Desktops
• Replaces DP/N 810285-001 and 804057-001
• Lightweight design at 1.6 ounces
• Includes integrated fan for immediate installation

Who it fits

Key specs explained for this cooler

Compatible Device: HP EliteDesk 705 800 600 G2 SFF Desktop

This listing is built for specific HP small form factor desktops. You must verify your exact model number before buying. It will not fit standard ATX cases or other brands. Check your system type carefully. This ensures the mounting holes and thermal pad align correctly with your motherboard's CPU socket area for proper heat transfer.

Replacement DP/N: 810285-001 804057-001

These part numbers are the official HP identifiers for the original cooler. Use them to cross-reference your old unit. If your current cooler matches these codes, this replacement is a direct fit. This prevents ordering the wrong size. It saves time by confirming compatibility without needing to measure the physical dimensions yourself.

Model: VG.XX.482-HY

This is the manufacturer’s specific model code for this heatsink assembly. It helps identify the exact design variant within the BestParts lineup. When comparing options, this code distinguishes it from other generic coolers. It ensures you are getting the precise component designed for the G2 SFF chassis constraints and airflow requirements.

Weight: 1.6 ounces

This unit is very light, weighing only one point six ounces. The low mass reduces stress on the motherboard socket. It is easy to handle during installation or removal. This lightness is typical for small form factor coolers. It does not imply inferior build quality, but rather a design optimized for tight spaces and minimal weight.

Design and build specs

According to the listing, this unit is a direct replacement for HP EliteDesk 705, 800, and 600 G2 SFF desktops. The model number VG.XX.482-HY indicates it is engineered for these specific small form factor chassis. You cannot use this in standard ATX cases or other desktop types. The design is strictly tied to the original HP footprint. It replaces part numbers 810285-001 and 804057-001. This means you must match your existing hardware exactly. The listing provides pictures to help you verify compatibility. You should check those images against your current cooler before purchasing.

The assembly includes one heatsink and one fan. The total weight is 1.6 ounces. This light weight suggests the heatsink uses a minimal amount of aluminum or copper. It is not a high-mass tower cooler. The design relies on the case airflow rather than heavy thermal mass. The system type is listed as desktop. The only feature mentioned is the fan. There are no extra controls, RGB lighting, or software options. The finish is not described. You should assume it matches the stock HP aesthetic. This is a utilitarian part. It is meant to restore cooling performance in a confined space. It does not offer aesthetic upgrades. The build is functional and specific. It fits where space is tight. It does not fit where space is open.

Setup and daily use guide

This product is a direct replacement heatsink and fan assembly. You receive one unit that includes both the heat sink and the attached fan. The listing identifies it by part numbers 810285-001 and 804057-001. These numbers help you confirm compatibility with your specific hardware. You must check your current cooler against these part numbers before installation. The unit is designed exclusively for HP EliteDesk 705, 800, and 600 G2 Small Form Factor desktops. It does not fit standard ATX cases or other desktop chassis types. The model number VG.XX.482-HY indicates the specific engineering for these small form factor systems. Installation involves removing the old unit and securing this replacement in the same mounting points. Because it weighs 1.6 ounces, the physical handling is straightforward. You do not need to manage complex cable routing for a separate fan, as the fan is integrated. The system type is listed as desktop, confirming its intended environment. Daily use relies on the included fan to dissipate heat from the CPU. The lightweight design suggests it is not built for heavy overclocking or extreme thermal loads. It is suitable for standard office workloads where the original cooling solution has failed. You should verify the physical fit by comparing pictures in the listing with your current setup. This ensures the new unit aligns correctly with your motherboard and case constraints. The product is a functional swap for maintenance or repair purposes. It restores cooling functionality without requiring additional components or software configuration. Ensure your power connections match the original fan header on the motherboard.

Before you buy this heatsink

You need to verify your exact desktop model before ordering. This unit fits only the HP EliteDesk 705, 800, and 600 G2 Small Form Factor systems. It is not a universal cooler. You must check the part numbers 810285-001 or 804057-001 on your existing hardware. The listing includes one heatsink with an attached fan. You do not need to buy a separate fan. This is a direct replacement part. You should also inspect your motherboard for any physical damage before installation. Thermal paste is usually pre-applied, but you may want extra paste for best results. This cooler is one of 1 options reviewed here. It suits users who need a specific OEM-style replacement for their small form factor machine. It does not suit those looking for high-end aftermarket performance in standard cases. Ensure your case has enough clearance for the fan height.

Check before you buy

• Confirm your HP EliteDesk model is G2 SFF.
• Check existing part numbers match 810285-001 or 804057-001.
• Verify fan height clearance in your small form factor case.
• Ensure you have thermal paste ready for installation.

The product at a glance

1

BestParts HP EliteDesk G2 SFF Heatsink Fan

Best for: HP EliteDesk G2 SFF replacement cooling

Compatible Device

HP EliteDesk 705 800 600 G2 SFF Desktop

Features

Fan

Weight

1.6 ounces

View on Amazon: BestParts HP EliteDesk G2 SFF Heatsink Fan Affiliate link

This BestParts unit is a replacement CPU air cooler designed specifically for HP EliteDesk 705, 800, and 600 G2 SFF desktops. It includes a heatsink and fan assembly with a total weight of 1.6 ounces. You need to verify your model number and check images to ensure compatibility. It serves as a direct swap for part numbers 810285-001 and 804057-001.

Pros

• Compatible with HP EliteDesk 705, 800, and 600 G2 SFF models
• Includes both heatsink and fan in one package
• Lightweight design at 1.6 ounces
• Direct replacement for DP/N 810285-001 and 804057-001

Cons

• Limited to specific HP EliteDesk G2 SFF desktops only
• No detailed thermal performance specifications provided
• Requires manual verification of model compatibility

Good fit if

• You own an HP EliteDesk 705, 800, or 600 G2 SFF desktop
• You need a direct replacement for part number 810285-001 or 804057-001
• You want a complete heatsink and fan assembly

Skip if

• You have a different HP EliteDesk generation or form factor
• You require detailed thermal dissipation ratings
• You need compatibility with non-HP systems

Verdict: BestParts HP EliteDesk G2 SFF Air Cooler is a suitable replacement for users with compatible HP EliteDesk G2 SFF desktops needing a direct swap for part numbers 810285-001 or 804057-001.

Specifications side by side

Frequently asked questions

See also

• bestparts CPU air cooler heat alternatives
• bestparts e1a e1b lga 4677 carrier review
• ashihoti evaporative air cooler review
• minorsonic aio CPU cooler review