BestParts HP EliteDesk G2 SFF Alternatives: 6 Similar Picks Compared

How these picks compare to BestParts

AMD Wraith Prism RGB CPU Cooler

The AMD Wraith Prism RGB offers a completely different cooling approach. It supports the AM4 socket, whereas the BestParts unit is designed for HP EliteDesk G2 systems. This AMD cooler weighs one pound, significantly heavier than the 1.6-ounce BestParts replacement. It includes RGB lighting, a feature absent in the utilitarian BestParts fan. The dimensions are much larger at 9.45 inches in length. You should choose this if you are building or upgrading an AM4 desktop. It provides official AMD quality and aesthetic appeal. It is not suitable for HP EliteDesk machines. The copper material aids in heat dissipation for modern processors. This is a standalone solution, not a direct swap for legacy HP hardware.

Intel Socket 478 Copper Core CPU Cooler

The Intel Socket 478 Copper Core Cooler targets legacy hardware restoration. It is built for Socket 478 Pentium 4 and Celeron processors. This differs from the BestParts cooler, which fits HP EliteDesk 705, 800, and 600 G2 models. The Intel unit uses copper construction for thermal performance. It lacks the specific mounting design required for HP systems. You would pick this if you are maintaining older, vintage computing setups. It is a functional, no-frills replacement part. The BestParts option is better for maintaining office desktops from the G2 era. This Intel cooler does not support modern sockets. It is a specialized part for a very specific, older generation of processors. Choose this for historical accuracy in retro builds.

Dynatron Copper LGA1156 Blower Heatsink

The Dynatron Copper LGA1156 Blower Heatsink serves a different niche. It is designed for LGA1156 socket compatibility. The BestParts cooler is specific to HP EliteDesk G2 systems. This Dynatron unit weighs 12.5 ounces, making it heavier than the 1.6-ounce BestParts fan. It features a copper construction for better heat transfer than aluminum. The dimensions are compact at 3.35 inches in length. You should select this for maintaining older Intel LGA1156 systems. It is not a drop-in replacement for HP desktops. It fits users needing a straightforward fan solution for legacy i5 or i7 CPUs. This option gives up modern compatibility for historical support. It is a robust choice for specific motherboard maintenance tasks.

Dynatron 1U Active Copper Heatsink

The Dynatron 1U Active Copper Heatsink is specialized for compact builds. It supports both LGA1155 and LGA1156 sockets. This contrasts with the BestParts cooler, which is for HP EliteDesk G2 systems. The Dynatron unit weighs 15.2 ounces, much heavier than the 1.6-ounce BestParts part. It measures 5 inches in width and length. The copper material provides solid thermal performance for older Intel platforms. You would choose this for LGA1155 or LGA1156 motherboards. It is not compatible with HP EliteDesk hardware. This cooler is designed for 1U form factor constraints. It offers a compact solution for legacy systems. The BestParts option is better for direct HP replacements. Pick this for specific socket compatibility in older workstations.

Supermicro SNK-P0051AP4 LGA2011 Active Cooler

The Supermicro SNK-P0051AP4 Active Cooler is built for workstation environments. It supports the LGA 2011 socket for Intel Xeon processors. This is different from the BestParts cooler, which fits HP EliteDesk G2 systems. The Supermicro unit weighs two pounds, significantly heavier than the 1.6-ounce BestParts fan. It measures 7.48 inches in width. The active cooling method ensures durable thermal management for Xeon CPUs. You should pick this for older server platforms or heavy workstation builds. It is not suitable for HP desktops. This cooler provides robust performance for specific socket types. It gives up compactness for high-end thermal capacity. The BestParts option is ideal for office PC maintenance. Choose this for specialized, high-load computing needs.

GENNEL 40mm Aluminum Heatsink with Fan

The GENNEL 40mm Aluminum Heatsink is designed for chipset cooling. It is not a main CPU cooler like the BestParts unit. The BestParts fan cools the processor in HP EliteDesk systems. This GENNEL heatsink weighs no listed amount but is much smaller. It measures 1.56 inches in length and width. The aluminum material is lighter but less conductive than copper. You would choose this for cooling chipsets or northbridge components. It fits small cases but cannot handle main CPU heat loads. It is a specialized accessory, not a primary cooling solution. The BestParts option is necessary for system operation in HP desktops. Pick this only if you need auxiliary cooling for motherboard components. It is a niche product for specific thermal management tasks.

Quick picks

Our 7 picks

1 Best overall

BestParts HP EliteDesk G2 SFF Heatsink Fan

Best for: HP EliteDesk G2 SFF replacement cooling

Compatible Device

HP EliteDesk 705 800 600 G2 SFF Desktop

Features

Fan

Weight

1.6 ounces

View on Amazon: BestParts HP EliteDesk G2 SFF Heatsink Fan Affiliate link

This BestParts replacement heatsink and fan is designed for HP EliteDesk 705, 800, and 600 G2 SFF desktops. It weighs 1.6 ounces and includes a single fan unit. The model VG.XX.482-HY serves as a direct swap for part numbers 810285-001 and 804057-001. You should verify compatibility with your specific machine before purchasing. It is a simple, lightweight cooling solution for these specific business desktops.

Pros

• Compatible with HP EliteDesk 705, 800, and 600 G2 SFF models
• Lightweight design at 1.6 ounces
• Includes heatsink and fan in one package
• Direct replacement for DP/N 810285-001 and 804057-001

Cons

• Limited to specific HP EliteDesk G2 SFF desktops
• Single fan configuration
• No RGB lighting or adjustable settings

Good fit if

• You own an HP EliteDesk 705, 800, or 600 G2 SFF desktop
• You need a direct replacement for part number 810285-001
• You prefer a lightweight cooling component

Skip if

• You use a different HP EliteDesk generation
• You require RGB lighting effects
• You need a cooler for a standard ATX tower case

Verdict: BestParts HP EliteDesk G2 SFF Air Cooler is a precise replacement for HP EliteDesk 705, 800, and 600 G2 SFF systems. It fits users who need a lightweight, direct swap for part 810285-001.

2 Also great

AMD Wraith Prism RGB CPU Cooler

Best for: AM4 desktop builds with RGB needs

Socket Compatibility

AM2/ AM3/ AM3+ / AM4

Material

Aluminum with copper core base

Compatible Device

Desktop

Dimensions

9.45"L x 27.17"W x 0.98"H

Lighting

RGB

Features

Fan

View on Amazon: AMD Wraith Prism RGB CPU Cooler Affiliate link

The AMD Wraith Prism is an official AMD-branded air cooler designed for AM2, AM3, AM3+, and AM4 sockets. It features an aluminum heat sink with a copper core base and direct contact heat pipes. The unit includes a fan with switchable overclock profiles and RGB lighting. Pre-applied thermal paste is included. It weighs one pound and measures 9.45 inches by 27.17 inches by 0.98 inches. This cooler suits desktop users seeking reliable cooling with aesthetic customization.

Pros

• Official AMD branded product
• Supports AM2, AM3, AM3+, and AM4 sockets
• Aluminum heat sink with copper core base
• Direct contact heat pipes
• Switchable overclock fan profile

Cons

• Large width of 27.17 inches may interfere with RAM modules
• Only one color option available
• Single fan configuration limits airflow compared to dual-fan designs

Good fit if

• You use an AM4 socket motherboard
• You want RGB lighting effects
• You prefer pre-applied thermal paste

Skip if

• You need a compact cooler for small cases
• You require support for Intel sockets
• You prefer silent operation over performance

Verdict: AMD Wraith Prism RGB AM4 Cooler is a solid choice for AM4 users who value RGB aesthetics and official AMD quality. It fits well in standard ATX cases with adequate RAM clearance.

3 Also great

Intel Socket 478 Copper Core CPU Cooler

Best for: Socket 478 Pentium 4 and Celeron restoration

Socket Compatibility

Socket 478

Material

Aluminum, Copper core

Compatible Device

Intel Pentium 4, Celeron processors

Fan Size

2.5-inch

Mounting Type

Heat sink retention clip

Features

Fan

View on Amazon: Intel Socket 478 Copper Core CPU Cooler Affiliate link

This Intel heatsink pairs an aluminum fin array with a copper core to cool Socket 478 processors. It includes a 2.5-inch fan with a 3-pin connector and a retention clip. You need this unit if you are restoring a Pentium 4 or Celeron system. It supports speeds up to 3.40 GHz. The design is compact and relies on standard 3-pin power.

Pros

• Copper core for efficient heat transfer
• Aluminum heat sink fins
• Includes 2.5-inch fan with 3-pin connector
• Fits Socket 478 retention clips

Cons

• Small 2.5-inch fan size
• Only supports legacy Socket 478
• 3-pin connector limits speed control

Good fit if

• You are repairing an older Intel Pentium 4 system
• You need a direct replacement for a Socket 478 cooler
• You are building a retro PC with Celeron processors

Skip if

• You use modern AM4 or LGA sockets
• You need 4-pin PWM fan control
• You require RGB lighting effects

Verdict: Intel Copper Core Socket 478 Cooler is a specific replacement part for legacy hardware. It fits users restoring Socket 478 systems who need a functional, no-frills cooling solution.

4 Also great

Dynatron Copper LGA1156 Blower Heatsink

Best for: Legacy Intel LGA1156 system maintenance

Socket Compatibility

LGA1156

Material

Copper

Compatible Device

Intel i5 & i7 CPUs

Fan Size

3-inch

Dimensions

3.35 x 3.21 x 1.12 inches

Features

Fan

View on Amazon: Dynatron Copper LGA1156 Blower Heatsink Affiliate link

This Dynatron K199 is a copper heat sink designed for Intel LGA1156 sockets, including i5 and i7 CPUs. It features a 3-inch blower fan with a 4-pin connector. The fan runs at 1200 RPM at low duty cycles and reaches 2600 RPM at 50%. Airflow is rated at 3.533 CFM. Its compact dimensions are 3.35 x 3.21 x 1.12 inches. You should use this if you need a direct replacement for older Intel platforms.

Pros

• Copper heat sink material for efficient heat transfer
• Compatible with Intel LGA1156 socket motherboards
• Includes a 3-inch blower fan with 4-pin connector
• Double ball bearing fan for durability

Cons

• Limited to older LGA1156 socket compatibility
• Low airflow rating of 3.533 CFM
• Fixed fan speed with no PWM control listed

Good fit if

• You need a replacement for an Intel LGA1156 system
• You are upgrading an older i5 or i7 CPU
• You require a compact 3-inch fan cooler

Skip if

• You have a modern LGA1700 or AM5 socket
• You need high airflow for overclocking
• You require RGB lighting or smart control

Verdict: Dynatron K199 LGA1156 Copper Cooler is a niche solution for maintaining legacy Intel LGA1156 systems. It fits users who need a straightforward, copper-based replacement fan for older i5 or i7 processors without modern features.

5 Best lga 1155

Dynatron 1U Active Copper Heatsink

Best for: LGA1155/LGA1156 compact builds

Socket Compatibility

LGA1155, LGA1156

Material

Copper

Server Height

1U

Cooling Method

Active

Dimensions

5 x 5 x 2.5 inches

Features

Fan

View on Amazon: Dynatron 1U Active Copper Heatsink Affiliate link

The Dynatron K199 is a 1U active copper heatsink designed for LGA1155 and LGA1156 sockets. It measures 5 x 5 x 2.5 inches and weighs 15.2 ounces. This cooler uses a fan for active cooling. It suits users needing a compact, server-style solution for older Intel platforms. The copper construction aids heat transfer. You get a reliable, space-saving option for specific desktop builds.

Pros

• Copper heatsink material for efficient heat dissipation
• Compatible with LGA1155 and LGA1156 sockets
• Compact 1U form factor saves space
• Includes an active fan for cooling

Cons

• Limited to older LGA1155 and LGA1156 sockets
• 1U height restricts use in standard cases
• No mention of modern socket support

Good fit if

• You need a cooler for an LGA1155 or LGA1156 socket
• You require a low-profile 1U heatsink
• You prefer copper construction for thermal performance

Skip if

• You use a modern socket like LGA1700 or AM5
• You need a standard tower cooler for airflow
• You have a case with limited height clearance

Verdict: The Dynatron K199 Copper Heatsink is a specialized 1U cooler for LGA1155 and LGA1156 systems. It fits users who need a compact, copper-based solution for older Intel platforms.

6 Best premium

Supermicro SNK-P0051AP4 LGA2011 Active Cooler

Best for: Intel Xeon LGA 2011 workstation builds

Socket Compatibility

LGA1150, LGA1155

Material

Copper Base, Aluminum Fins, Heat Pipes

Server Height

4U

Cooling Method

Active

Dimensions

7.48 x 4.72 x 5.51 inches

Mounting Type

Back Plate, Springs, Screws

View on Amazon: Supermicro SNK-P0051AP4 LGA2011 Active Cooler Affiliate link

This is an active cooling solution designed for Intel Xeon processors on LGA 2011 sockets. It uses a copper base with aluminum fins and heat pipes to manage heat. The unit includes a front-mounted cooling fan for active dissipation. It measures 7.48 by 4.72 by 5.51 inches and weighs 2 pounds. You should choose this if you need reliable thermal performance for workstation hardware.

Pros

• Copper base with aluminum fins and heat pipes
• Active cooling with included front fan
• Compatible with LGA 2011 and LGA 1150/1155 sockets
• Supports Intel Xeon E3-1200/v2/v3 family

Cons

• Large physical footprint at 7.48 inches wide
• Heavy build weighing 2 pounds
• Uses older LGA 1150/1155 mounting hardware

Good fit if

• You are building a workstation with an LGA 2011 Xeon CPU
• You need a robust copper-based heat sink for sustained loads
• You have a case that can accommodate a 4U active cooler

Skip if

• You are using a modern consumer socket like LGA 1700 or AM5
• You need a low-profile cooler for small form factor cases
• You prefer passive cooling without a fan

Verdict: Supermicro SNK-P0051AP4 LGA2011 Xeon Cooler is a heavy, active cooling unit built for specific workstation CPUs. It fits users who need durable thermal management for Intel Xeon processors on older server platforms.

7 Best budget

GENNEL 40mm Aluminum Heatsink with Fan

Best for: chipset and northbridge cooling

Material

Aluminium

Compatible Device

Northbridge, Chipset

Fan Size

40mm

Dimensions

approx 39.5x39.5x13mm

Features

Fan

View on Amazon: GENNEL 40mm Aluminum Heatsink with Fan Affiliate link

This GENNEL cooler uses an aluminum heatsink and a 40mm fan to cool small components. The unit measures 39.5x39.5x13mm and weighs 46g. It runs on 12V DC with a noise level of 28dBA. You should use it for northbridge or chipset cooling. The small form factor fits tight spaces. It provides passive and active cooling for low-heat chips.

Pros

• Aluminum heatsink material for efficient heat dissipation
• Compact 40mm fan size fits small enclosures
• Low noise output of 28dBA
• Lightweight design at 46g total weight

Cons

• 40mm fan is too small for main CPU cooling
• Only suitable for low-power components like chipsets
• No RGB lighting or advanced fan control features

Good fit if

• You need to cool a chipset or northbridge
• You have a very small form factor case
• You require a quiet and lightweight cooling solution

Skip if

• You need to cool a high-performance CPU
• You require RGB lighting or aesthetic features
• You need a standard 120mm or 140mm fan size

Verdict: GENNEL 40mm Aluminum Heatsink is a specialized cooler for chipsets. It fits small cases but cannot handle main CPU heat loads.

Specifications side by side

Frequently asked questions

See also

• minorsonic aio CPU cooler alternatives
• cincom leg massager heat air alternatives