ZZHXSM 80mm Black Aluminum Heatsink Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This zzhxsm 2pcs 80mm heatsink 80 review focuses on a compact passive cooling solution. You get two black anodized aluminum radiators in one package. Each unit measures 80 x 40 x 11mm. This small footprint makes it ideal for tight spaces. The heatsinks come with pre-coated thermal conductive adhesive tape. This simplifies installation for components that need steady heat dissipation without moving parts. You can attach them directly to heat-generating devices. The design prioritizes surface area contact to maximize cooling efficiency. It is a straightforward, no-frills approach to thermal management for low-power electronics.
What stands out
- Pack of two black anodized aluminum radiators
- Compact 80 x 40 x 11mm dimensions
- Pre-applied thermal conductive adhesive tape
- Lightweight design at 36g per unit
- Passive cooling for LEDs and FPV gear
Who it fits
Good fit for
This heatsink suits you if you are building a small 3D printer enclosure or outfitting an FPV transmitter. The passive design works well for LEDs that generate moderate heat. You will appreciate the included adhesive tape, which saves time on mounting. The 80mm width fits standard component layouts. It is a practical choice for hobbyists who need reliable, silent heat dissipation without the complexity of fans. The two-pack value allows you to cool multiple components simultaneously.
Who should skip it
You should look elsewhere if you need active cooling for high-power CPUs or GPUs. This unit relies solely on passive aluminum dissipation. It lacks fan support and has no mounting holes for mechanical attachment. If your device generates significant heat, this 11mm profile will not be enough. It is also not suitable for large industrial machinery. The adhesive backing may not hold well on uneven surfaces. Stick to fan-based solutions for high-thermal-load applications.
Verdict: This is a simple, spec-driven passive heatsink for low-power electronics. It works well for LEDs and small transmitters where silence and space matter.
Key specs explained for this heatsink
Material: Black anodized aluminum
Aluminum conducts heat well, allowing the unit to pull warmth away from your component quickly. The black anodized coating adds a thin layer of protection against corrosion and scratches. This finish also helps the surface radiate heat slightly more effectively than bare metal. You get a durable finish that resists wear during installation or removal. This material choice is standard for passive cooling in small electronics.
Dimensions: 80 x 40 x 11mm
These precise measurements define the physical footprint and thickness. The 80mm length and 40mm width fit many standard small enclosures. The 11mm height is very low, making it suitable for tight spaces where larger air coolers cannot fit. You can place it directly against a component without clearance issues. Compare this size to standard tower coolers to see the massive difference in space requirements.
Mounting Type: Thermal conductive adhesive tape
The heatsink uses pre-applied adhesive tape to attach directly to the heat source. This method simplifies installation by removing the need for screws or clips. It ensures immediate contact between the metal and the component for efficient heat transfer. You must ensure the surface is clean and flat for the adhesive to work properly. This mounting style is ideal for components with smooth surfaces like LED drivers or small chips.
Cooling Method: Passive
Passive cooling relies on natural air convection and the heatsink's surface area to dissipate heat. There are no fans, so the system operates with zero noise. This makes it perfect for environments where silence is critical. However, it lacks the active airflow of fan-based coolers, so it is best for low-power devices. You should only use this for components that do not generate excessive heat.
Build Quality and Physical Layout
The listing describes the ZZHXSM heatsink as a passive cooling solution built from black anodized aluminum. This material choice matters because aluminum transfers heat efficiently. The anodized finish adds a protective layer that resists corrosion and scratches. You get two identical units in this package, which is useful for redundant cooling or cooling multiple small components at once.
Each radiator measures 80 x 40 x 11mm. This compact size allows you to fit the unit into tight spaces where larger coolers would not work. The weight is listed at 1.26 ounces or 36 grams per unit. This light mass means you do not need heavy-duty mounting hardware. The design relies on thermal conductive adhesive tape for attachment. This method maximizes surface area contact with your target component, ensuring heat moves from the device into the fins effectively.
According to the listing, this passive design suits devices like 3D printers, LEDs, and FPV transmitters. Since there are no fans or moving parts, the unit operates silently. The simple layout and adhesive backing make installation straightforward. You simply clean the surface, apply the tape, and press the heatsink into place. This approach is ideal for components that generate moderate heat but require a low-profile, maintenance-free cooling solution.
Setup and everyday use
Setup is straightforward because the ZZHXSM heatsink relies on thermal conductive adhesive tape rather than screws or clips. You simply peel the backing off the pre-coated tape and press the unit firmly against your target component. This mounting method requires a clean, flat surface for proper contact. The adhesive ensures the heatsink stays in place without needing additional hardware. This design suits applications where space is limited or where drilling holes is not an option.
The heatsink is designed for passive cooling, meaning it has no fans or moving parts. It works by drawing heat away from your device and dissipating it into the surrounding air. This makes it suitable for low-heat components like LEDs, FPV transmitters, and certain 3D printer parts. Because it is passive, there is no noise generated during operation. You do not need to manage cables or power connections for this unit.
Daily use involves minimal maintenance. The black anodized aluminum surface resists corrosion, so you do not need to worry about rust or degradation over time. The compact dimensions of 80 x 40 x 11mm allow it to fit into tight enclosures without obstructing other components. Each unit weighs only 1.26 ounces, so it adds negligible mass to your build. You can install two units in the same package to cool multiple components simultaneously. Just ensure there is adequate airflow around the fins for optimal performance.
Before You Buy This Heatsink
This ZZHXSM heatsink is a passive solution. It lacks fans, so airflow matters. You must ensure your component has enough space for heat to dissipate. Check the surface area of your target device. The adhesive backing works best on flat, smooth surfaces. Rough textures may reduce contact. You may need additional thermal paste if the pre-coated tape is insufficient for your specific heat load. This unit fits 3D printers, LEDs, and FPV transmitters. It does not replace active CPU coolers for high-performance processors. Use it for low-power components where silence is priority. Compare its small 80 x 40 x 11mm size against larger air coolers. If you need heavy-duty cooling, look for models with heat pipes and fans. This option suits tight spaces with minimal heat output. Keep the surface clean before application. Dust accumulation can insulate the aluminum. Wipe it gently with a dry cloth. This simple maintenance keeps performance steady. It is a niche tool for specific electronics, not a general CPU cooler.
Check before you buy
- Verify component surface is flat for adhesive contact
- Confirm passive cooling meets your heat requirements
- Check space constraints against 80 x 40 x 11mm size
- Ensure target device is not a high-power CPU
The product at a glance
ZZHXSM 80mm Black Aluminum Heatsink 2-Pack
Best for: passive cooling of small low-power electronics
- Material
- Black anodized aluminum
- Cooling Method
- Passive
- Compatible Device
- 3D printers, LEDs, FPV transmitters
- Dimensions
- 80 x 40 x 11mm
- Mounting Type
- Thermal conductive adhesive tape
- Weight
- 1.26 ounces
View on Amazon: ZZHXSM 80mm Black Aluminum Heatsink 2-Pack Affiliate link
This is a passive cooling solution for low-heat components. It features black anodized aluminum fins measuring 80 by 40 by 11mm. The unit comes with pre-applied thermal conductive adhesive for easy mounting. You get two identical heatsinks in the package. Each unit weighs 36 grams. This design suits small electronics like LEDs or FPV transmitters that need simple, fanless heat dissipation.
Pros
- Black anodized aluminum construction for efficient heat transfer
- Compact 80 x 40 x 11mm dimensions fit tight spaces
- Pre-coated thermal conductive adhesive tape simplifies installation
- Includes two units for multiple components
Cons
- Passive cooling only; no fan for active airflow
- Adhesive mounting limits repositioning or removal
- Small surface area restricts use to low-power devices
Good fit if
- You need passive cooling for small electronics
- You have limited space for a 40mm width
- You want a simple adhesive mount without screws
Skip if
- You require active cooling with a fan
- You need to cool a high-TDP CPU
- You prefer screw-mounting over adhesive tape
Verdict: ZZHXSM 80x40mm Black Aluminum Heatsink is a compact passive cooler for low-heat components like LEDs or FPV transmitters. It fits users who need a small, adhesive-mounted solution for tight spaces.
Specifications side by side
| Spec | ZZHXSM 80mm Black Aluminum Heatsink 2-Pack |
|---|---|
| Material | Black anodized aluminum |
| Cooling Method | Passive |
| Compatible Device | 3D printers, LEDs, FPV transmitters |
| Dimensions | 80 x 40 x 11mm |
| Mounting Type | Thermal conductive adhesive tape |
| Color | Black |
| Features | Thermal Tape |
| Weight | 1.26 ounces |
| Model | AHEATS-80x40x11-2 |
Frequently asked questions
Is this heatsink suitable for an FPV transmitter?
Yes, the ZZHXSM 80mm heatsink is designed for passive cooling of small low-power electronics like FPV transmitters. Its compact size allows it to fit in tight spaces where airflow is limited. The black aluminum material efficiently draws heat away from the component without needing active fans.
What are the exact dimensions of the heatsink?
Each unit measures 1.57 inches in width, 3.15 inches in length, and 0.44 inches in height. The model number is AHEATS-80x40x11-2. These dimensions confirm it is a compact solution for small components. The low profile ensures it does not obstruct nearby parts in crowded builds.
How does the thermal tape work?
The heatsink includes pre-applied thermal adhesive tape for mounting. You peel off the backing and press the unit firmly against your target component. This method requires a clean, flat surface for optimal heat transfer. It eliminates the need for screws or clips, simplifying installation.
What material is the heatsink made of?
It is constructed from black anodized aluminum. Aluminum is chosen for its ability to conduct heat effectively. The anodized finish provides a protective layer against corrosion and scratches. This material ensures the heatsink remains durable while efficiently dissipating warmth from your electronic components.
How much does one heatsink weigh?
Each heatsink weighs 1.26 ounces. This lightweight design makes it easy to handle during installation. The low weight ensures it does not add significant bulk to your project. It is ideal for applications where minimizing overall device weight is a priority for the user.
Do I need a fan with this heatsink?
No, this is a passive cooling solution. It relies on natural convection to dissipate heat. You must ensure your component has enough space for air to flow around the fins. Adding a fan is optional but not required for its basic function as described in the specs.
Can I use this for LED cooling?
Yes, it is suitable for passive cooling of low-power LEDs. The compact 80mm size fits well with small LED strips or individual high-power LEDs. The aluminum construction helps manage heat effectively. Ensure the adhesive surface is clean and flat for the best thermal performance.