Looking Beyond the YAEHUYING CPU+GPU Cooling Fan Acer? 6 Alternatives Worth a Look

Comparing alternatives to the YAEHUYING fan

Noctua 140mm Quiet PWM Fan

The Noctua NF-A14 is a standard 140mm case fan, not a laptop replacement part. It measures 140x140x25 mm and weighs 7.05 ounces. You use it for quiet PC case ventilation or radiator cooling. It prioritizes silence over high-speed performance. The YAEHUYING fan is a specific replacement for Acer Predator Helios Neo laptops. It includes both CPU and GPU fans with a 4-pin connector. The Noctua unit lacks laptop-specific mounting hardware. It is a general-purpose component. Choose the Noctua if you are building a desktop PC. Pick the YAEHUYING unit only if you need to repair a specific Acer laptop model.

ID-COOLING 45mm Low-Profile CPU Cooler

The ID-COOLING IS-40X V3 is a low-profile CPU cooler for desktops. It measures 101x94x45mm and weighs 11.2 ounces. It features four heat pipes. This cooler is designed for small form factor ITX builds. It fits where RAM clearance is tight. The YAEHUYING fan is a replacement part for Acer laptops. It cools both the CPU and GPU. The ID-COOLING unit only cools the CPU. It uses a different mounting system. You cannot install the ID-COOLING cooler in your laptop. It is a desktop component. Select the ID-COOLING cooler for a compact desktop build. Use the YAEHUYING fan to restore cooling in your Acer laptop.

AMD Wraith Spire Aluminum AM4 Cooler

The AMD Wraith Spire is an aluminum CPU cooler for AM4 sockets. It measures 3.81 inches on each side. It is a basic solution for standard processor loads. It comes ready for thermal paste application. The YAEHUYING fan is a laptop replacement part. It includes both CPU and GPU fans. The AMD cooler is for desktop motherboards. It does not fit laptops. The YAEHUYING unit has a 4-pin connector for DC12V. The AMD cooler uses a different interface. You need the AMD unit for an AM4 desktop system. Choose the YAEHUYING fan if you need to repair your Acer laptop cooling system.

Thermalright AXP90 36mm Low-Profile Cooler

The Thermalright AXP90 X36 is a low-profile cooler for AM5 and other sockets. It stands 36mm tall and weighs 15.8 ounces. It supports AM4, AM5, LGA 1851, LGA 1200, LGA 1150, and LGA 1151. It is built for ITX builds with low height requirements. The YAEHUYING fan is a laptop replacement part. It cools both CPU and GPU. The Thermalright unit only cools the CPU. It uses a different mounting mechanism. You cannot use the Thermalright cooler in your laptop. It is a desktop component. Pick the Thermalright cooler for a small desktop case. Use the YAEHUYING fan to replace broken laptop fans.

Akasa 26.9mm Low-Profile LGA 1700 Cooler

The Akasa AK-CC6601EP01 is a low-profile cooler for LGA 1700 sockets. It measures 3.35 x 3.43 x 1.06 inches. It weighs 5.86 ounces. It is made of aluminum. It is designed for low-TDP Intel chips in Mini-ITX builds. It cannot handle high-wattage processors. The YAEHUYING fan is a laptop replacement part. It includes CPU and GPU fans. The Akasa unit is for desktop motherboards. It lacks laptop compatibility. The YAEHUYING unit has a 4-pin connector. The Akasa cooler uses a different interface. Choose the Akasa cooler for a small desktop build. Use the YAEHUYING fan to fix your Acer laptop.

Thermalright AXP120 67mm Low-Profile Cooler

The Thermalright AXP120-X67 is a low-profile cooler with six heat pipes. It stands 67mm tall and weighs 1.34 pounds. It supports AM4, LGA 1700, LGA 1200, LGA 1150, and LGA 1151. It uses a 120mm fan. It is for compact cases with tall RAM. The YAEHUYING fan is a laptop replacement part. It cools both CPU and GPU. The Thermalright unit only cools the CPU. It uses a different mounting system. You cannot install the Thermalright cooler in your laptop. It is a desktop component. Select the Thermalright cooler for a compact desktop. Use the YAEHUYING fan to replace broken laptop fans.

Quick picks

Our 7 picks

1 Best overall

YAEHUYING CPU+GPU Fan for Acer Predator Helios Neo

Best for: Acer Predator Helios Neo laptop repairs

Compatible Device

GPU

Features

Fan

View on Amazon: YAEHUYING CPU+GPU Fan for Acer Predator Helios Neo Affiliate link

This is a replacement cooling fan set for Acer Predator Helios Neo 18 and 16 laptops. It includes both CPU and GPU fans with 4-pin connectors. The unit runs on DC12V 1A power. It is designed for models like PHN18-71 and PHN16-71. You need this if your laptop fans fail. It helps maintain stable temperatures and low noise. Check your specific model number before buying.

Pros

• Includes both CPU and GPU fans
• 4-pin connector for standard laptop connection
• Compatible with Acer Predator Helios Neo 18 and 16 series

Cons

• Only fits specific Acer laptop models
• Requires careful model number verification
• Not a desktop air cooler

Good fit if

• You own an Acer Predator Helios Neo 18 or 16
• Your laptop CPU or GPU fans have stopped working
• You need a direct replacement for PHN18-71 or PHN16-71

Skip if

• You are building a desktop PC
• You need a cooler for Intel or AMD desktop sockets
• Your laptop model is not listed in the compatibility range

Verdict: YAEHUYING CPU+GPU Fan for Acer Predator Helios Neo is a targeted replacement part for specific Acer laptops. It fits owners of PHN18-71 or PHN16-71 models who need to restore cooling function.

2 Also great

Noctua 140mm Quiet PWM Fan

Best for: quiet case and radiator ventilation

Fan Size

140mm

Fan Speed

1500 RPM

Features

Fan

Dimensions

8.5 × 1.5 × 6 inches

Weight

7.05 ounces

View on Amazon: Noctua 140mm Quiet PWM Fan Affiliate link

The Noctua NF-A14 is a 140mm fan designed for quiet operation. It reaches 1500 RPM and produces a maximum noise level of 24.6 dB(A). The 4-pin PWM header allows automatic speed control between 300 and 1500 RPM. You get a low-noise adapter to cap speed at 1200 RPM. This unit suits cases, radiators, and cabinet ventilation needs.

Pros

• 140x140x25 mm square frame design
• Max speed of 1500 RPM
• Low noise output of 24.6 dB(A)
• 4-pin PWM for automatic control
• Includes low-noise adapter and cables

Cons

• Limited to 140mm fan size
• Single fan unit only
• No included pump connector

Good fit if

• You need quiet case ventilation
• You have a 140mm radiator
• You want automatic speed control

Skip if

• You need a 120mm fan
• You require RGB lighting
• You want a pre-built cooler

Verdict: Noctua NF-A14 140mm Quiet Fan delivers reliable airflow with minimal noise for standard PC cases and radiators. It fits builders who prioritize silence over high-speed performance.

3 Best 4 heat pipes

ID-COOLING 45mm Low-Profile CPU Cooler

Best for: Small form factor and ITX builds

Socket Compatibility

LGA1700/1200/115X, AM5/AM4

Cooler Height

45mm

Heat Pipes

4

Tower Design

Low-Profile

Fan Size

92mm

Features

Fan

View on Amazon: ID-COOLING 45mm Low-Profile CPU Cooler Affiliate link

This ID-COOLING cooler stands 45mm tall, making it one of the slimmest options for small cases. It uses four heat pipes and a 92mm PWM fan to move up to 46CFM of air. The fan noise stays at 35.2dB(A) maximum. It fits Intel LGA1700 and AMD AM5 sockets. You get solid cooling performance without blocking tall RAM sticks in tight builds.

Pros

• 45mm total height for tight spaces
• Four copper heat pipes for heat transfer
• 92mm PWM fan with 46CFM airflow
• Compatible with Intel LGA1700 and AMD AM5

Cons

• Smaller 92mm fan limits max airflow compared to 120mm or 140mm fans
• 45mm height may not clear very tall RAM modules on some motherboards
• Single fan design offers less redundancy than dual-fan towers

Good fit if

• You are building an ITX or small form factor PC
• You need a cooler under 50mm to fit standard RAM
• You use Intel LGA1700 or AMD AM5 sockets

Skip if

• You require maximum cooling for high-end i9 or Ryzen 9 chips
• You have very tall RAM that exceeds 45mm clearance
• You prefer larger 120mm or 140mm fans for lower noise

Verdict: ID-COOLING IS-40X V3 45mm Low Profile Cooler fits small builds where RAM clearance is tight. It delivers reliable cooling for mid-range CPUs without blocking memory slots.

4 Also great

AMD Wraith Spire Aluminum AM4 Cooler

Best for: Standard AM4 socket cooling needs

Socket Compatibility

AM4

Fan Size

3.81-inch

Material

Aluminum

Features

Fan

Dimensions

3.81 × 3.81 × 3.81 inches

View on Amazon: AMD Wraith Spire Aluminum AM4 Cooler Affiliate link

The AMD Wraith Spire is a dedicated CPU cooler for AM4 sockets. It features an aluminum heatsink with pre-applied thermal paste and a 3.81-inch fan. The 4-pin connector offers precise speed control. This unit suits users who need a simple, reliable cooling solution for standard AM4 processors without complex installation steps.

Pros

• Aluminum heatsink for efficient heat dissipation
• Pre-applied thermal paste saves setup time
• 4-pin PWM connector for speed control
• Compatible with AM4 motherboard sockets

Cons

• Aluminum construction limits heat capacity compared to copper
• Single 3.81-inch fan restricts airflow volume
• Socket compatibility limited to AM4 only

Good fit if

• You own an AM4 socket motherboard
• You prefer a cooler with pre-applied paste
• You need a standard 4-pin fan connection

Skip if

• You use LGA1700 or other non-AM4 sockets
• You require high-end cooling for overclocking
• You need a cooler taller than 3.81 inches

Verdict: AMD Wraith Spire AM4 Aluminum Cooler provides basic cooling for AM4 systems. It fits users who want a straightforward, paste-ready solution for standard processor loads.

5 Best budget

Thermalright AXP90 36mm Low-Profile Cooler

Best for: ITX builds requiring AM5 support and low height

Socket Compatibility

AM4, AM5, LGA1700, 115X, 1200, 1851

Cooler Height

36mm

Heat Pipes

4

Tower Design

Low-Profile

Fan Size

92mm

System Type

ITX

View on Amazon: Thermalright AXP90 36mm Low-Profile Cooler Affiliate link

This low-profile air cooler stands 36mm tall, making it suitable for compact ITX builds where case clearance is tight. It includes a 92mm PWM fan and uses four 6mm heatpipes to transfer heat from the CPU. The unit supports AM4, AM5, and Intel LGA sockets. It operates at a maximum noise level of 22.4 dBA. You should choose this if you need a small footprint without sacrificing basic cooling capability.

Pros

• Compact 36mm total height for small cases
• Supports AMD AM5 and Intel LGA1700 sockets
• Includes a 92mm PWM fan for airflow control
• Uses four 6mm heatpipes for heat transfer

Cons

• 92mm fan size limits maximum airflow potential
• Low-profile design restricts heat dissipation capacity
• Slender heatsink may struggle with high-TDP CPUs

Good fit if

• You are building an ITX PC with limited vertical clearance
• You need a cooler that fits under low-profile CPU cases
• You require AM5 socket compatibility in a small form factor

Skip if

• You plan to use a high-TDP processor requiring massive cooling
• You have a standard ATX case with ample tower cooler space
• You prefer larger 120mm or 140mm fans for quieter operation

Verdict: Thermalright AXP90 X36 Low Profile Cooler fits users who must prioritize case compatibility over raw cooling power. It is a practical solution for small builds that cannot accommodate taller air coolers.

6 Best premium

Akasa 26.9mm Low-Profile LGA 1700 Cooler

Best for: Low-TDP Intel LGA1700 Mini-ITX builds

Socket Compatibility

LGA1700

Cooler Height

26.9 mm

Tower Design

Low-Profile

Fan Size

75 mm

TDP Rating

35 W

System Type

ITX

View on Amazon: Akasa 26.9mm Low-Profile LGA 1700 Cooler Affiliate link

This Akasa cooler is built for Intel LGA1700 sockets in Mini-ITX and HTPC cases. Its 26.9 mm height allows it to fit in tight spaces where standard towers will not. The aluminum heatsink and 75 mm fan handle up to 35 W TDP. It uses a tool-free push-pin assembly for quick mounting. This unit suits users who prioritize compact dimensions over raw cooling power.

Pros

• 26.9 mm low-profile height fits small form factor cases
• Supports Intel LGA1700 socket
• Tool-free push-pin assembly for easy installation
• Rated for 35 W TDP processors
• Aluminum heatsink core

Cons

• 35 W TDP rating limits use to low-power CPUs
• 75 mm fan size is smaller than standard 120 mm options
• Only supports LGA1700 socket

Good fit if

• You need a cooler under 30 mm height
• You are building a Mini-ITX system
• You use an Intel LGA1700 processor with low TDP

Skip if

• You require support for AMD sockets
• You have a high-TDP CPU exceeding 35 W
• You need a standard 120 mm or 140 mm fan

Verdict: Akasa LGA1700 Low Profile Cooler is a compact solution for Mini-ITX builds using low-power Intel chips. It fits tight cases but cannot handle high-wattage processors.

7 Best 6 heat pipes

Thermalright AXP120 67mm Low-Profile Cooler

Best for: compact cases with tall RAM

Socket Compatibility

AM4, AM5, LGA 1700, 1200, 1150, 1151

Cooler Height

67 mm

Heat Pipes

6

Tower Design

Low-Profile

Fan Size

120 mm

Fan Speed

1800 RPM

View on Amazon: Thermalright AXP120 67mm Low-Profile Cooler Affiliate link

This low-profile air cooler stands 67 mm tall and uses six 6 mm heat pipes with AGHP technology to manage heat in any orientation. It includes a 120 mm PWM fan that moves 59 CFM of air while staying under 26.1 dB. You get compatibility with Intel LGA 1700 and AMD AM4 sockets. It suits users who need a compact cooler that does not block RAM slots.

Pros

• Six 6 mm pure copper heat pipes with AGHP technique
• Low-profile design at 67 mm total height
• Includes a 120 mm PWM fan with 59 CFM airflow
• Supports Intel LGA 1700 and AMD AM4 sockets

Cons

• 67 mm height may limit compatibility with very tall RAM modules
• Fan noise level reaches up to 26.1 dB at maximum speed
• Aluminum fins on copper base may offer less thermal mass than full copper designs

Good fit if

• You need a low-profile cooler for a small form factor case
• You want a 120 mm fan for better airflow and quieter operation
• You use Intel LGA 1700 or AMD AM4 platforms

Skip if

• You require a cooler taller than 67 mm for higher heat dissipation
• You need RGB lighting or ARGB support on the cooler
• You prefer a full copper heat sink over an aluminum fin stack

Verdict: The Thermalright AXP120-X67 Low-Profile CPU Cooler delivers efficient cooling for compact builds using six heat pipes and a 120 mm fan. It fits users who prioritize low height and broad socket support without needing flashy lighting features.

Specifications side by side

Frequently asked questions

See also

• thermalright tl 9015 CPU fan alternatives
• best SSD enclosures with cooling fan