upHere Dual-Tower ARGB CPU Cooler Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
In this uphere dual tower argb CPU cooler review, we look at a cooling solution designed for high-performance builds. This air cooler features a dual-tower structure with eight direct-touch heat pipes. It pairs this with a 120mm ARGB PWM fan that supports 5V addressable lighting. The unit is rated for a 280W TDP, offering substantial thermal headroom for modern processors. You get black-coated copper components for oxidation resistance and a magnetic quick-install system for easy mounting. This combination of hardware aims to balance silence with efficient heat dissipation for compatible Intel and AMD sockets.
What stands out
- 8 direct-touch copper heat pipes for rapid heat absorption
- 106 pierced and folded fins providing 454,200mm² of surface area
- 120mm fan with hydraulic bearings achieving up to 68 CFM airflow
- Magnetic cover system allowing assembly in under 30 seconds
- Full RAM clearance with precisely angled heat pipes
Who it fits
Good fit for
This cooler suits users with Intel LGA 1851, 1700, or 2066 and AMD AM5 or AM4 platforms who need robust cooling for high-TDP CPUs. The dual-tower design and eight heat pipes handle up to 280W, making it ideal for gaming rigs or workstations. The 120mm ARGB fan appeals to those wanting synchronized lighting effects. Additionally, the magnetic installation system benefits builders who prioritize quick assembly and tool-friendly setups without removing fans.
Who should skip it
You might want to skip this option if you prefer silent operation below 27 dB(A), as the fan can reach higher speeds for performance. If your case cannot accommodate a dual-tower cooler with a 120mm fan, this unit will not fit. Users seeking a single-tower design for smaller cases should look elsewhere. Also, if you do not want ARGB lighting or prefer a non-ARGB aesthetic, consider the black-only variant or other models. The specific socket support excludes older platforms like LGA 115x without checking compatibility details.
Verdict: The upHere Dual-Tower ARGB CPU Cooler offers strong thermal performance and easy installation for modern high-end platforms. Its eight heat pipes and dual-tower design make it a practical choice for demanding builds.
Key specs explained
Fan Size: 120mm
This cooler uses a standard 120mm fan. You can easily find replacement fans if needed. This size fits most mid-tower cases without blocking RAM. It balances airflow and noise well. If your case supports 140mm fans, you might get slightly more airflow. But 120mm remains the practical choice for compact builds.
Heat Pipes: 8
Eight heat pipes move heat from the CPU base to the fins. More pipes usually mean better heat distribution. This setup helps prevent hot spots on the processor. You benefit from stable temperatures under load. Compare this to coolers with six pipes. The extra pipes offer a margin of safety for high-TDP chips.
TDP Rating: 280W
The manufacturer rates this cooler for up to 280W of heat. This suggests it can handle high-end desktop processors. You should check your CPU's actual power draw. If your chip draws less than 280W, this cooler is suitable. It offers headroom for overclocking. Lower TDP ratings indicate cooler for entry-level parts.
Tower Design: Dual Tower
A dual-tower design uses two fin stacks. This increases surface area for heat dissipation. You get better cooling than single-tower designs. It takes up more space on the motherboard. Ensure your case has enough width. This design is ideal for users who need maximum cooling performance without switching to liquid.
Socket Compatibility: LGA 1851/1700/2011/2066/115X, AM5/AM4/AM3
This cooler supports a wide range of modern and older sockets. You can use it with recent Intel and AMD CPUs. This versatility is useful if you upgrade platforms later. Check your specific motherboard socket before buying. Broad compatibility saves you from buying a new cooler with every new CPU generation.
Design and Build Details
According to the listing, the upHere Dual-Tower ARGB CPU Cooler uses a black finish with copper heat pipes. The unit features eight direct-touch heat pipes that connect to 106 pierced and folded fins. This design provides a surface area of 454,200 square millimeters. The black coating on the copper helps resist oxidation while maintaining a uniform look. The dual-tower layout allows for substantial heat dissipation. This structure supports a TDP rating of 280W. You can expect efficient heat transfer from the CPU to the fins. The aerodynamic blade geometry on the 120mm fan aims to reduce turbulence. This choice helps keep noise levels low, rated at 27 dB(A) or less. The fan speed ranges from 600 to 1650 RPM. It delivers 68 CFM of airflow. The dual hydraulic bearing supports stable operation over time. The MagCover quick-install system uses magnetic elements to simplify mounting. You can assemble the cooler in under 30 seconds with a standard screwdriver. This feature removes the need to detach the fan during installation. The angled heat pipes are designed to bypass memory slots. This clearance ensures compatibility with tall DDR4 or DDR5 RAM kits. The cooler supports modern Intel and AMD sockets. It fits LGA 1851, 1700, 2011, 2066, and 115x, as well as AM5, AM4, and AM3. The ARGB lighting adds visual customization. You can sync the 5V addressable RGB effects with your motherboard. The infinity mirror top creates a depth effect. This finish turns the cooler into a visible component of your build.
Setup And Everyday Use
Installation relies on the MagCover Quick-Install System. This magnetic cover reveals slots for mounting hardware. You can assemble the unit in under thirty seconds using only a standard screwdriver. The design requires no fan disassembly during the process. This approach simplifies the build for most users.
Socket compatibility covers modern platforms. The cooler supports Intel LGA 1851, 1700, 1200, 115x, 2011, and 2066. It also works with AMD AM5, AM4, and AM3 sockets. The heat pipes are angled to bypass memory zones. This ensures full clearance for tall DDR4 or DDR5 RAM kits. You do not need to worry about physical obstruction from high-profile memory modules.
During daily use, the fan operates between 600 and 1650 RPM. This range allows for adjustable performance. The airflow reaches 68 CFM while maintaining noise levels at or below 27 dB(A). The dual hydraulic bearing design aims for stable operation over time. The 5V ARGB lighting syncs with motherboard software for color customization. You can choose from 16.8 million colors to match your build aesthetic.
The dual-tower design with eight direct-touch heat pipes handles TDP ratings up to 280W. This capacity suits high-performance CPUs. The black-coated copper components resist oxidation. The pierced and folded fin structure enhances heat transfer efficiency. You get a cooling solution that balances silent operation with substantial thermal output.
Before You Buy This Cooler
Before you buy, check your case dimensions carefully. This dual-tower unit is substantial. You need enough vertical clearance for the 120mm fan and tower height. Also verify RAM clearance. The listing states the angled heatpipes bypass memory zones, but tall DDR5 kits may still interfere. Ensure your motherboard socket matches the supported list, including LGA 1851, 1700, or AM5. You will need a 5V ARGB header on your motherboard for the lighting effects. Standard 4-pin PWM headers handle fan speed. Keep dust filters clean for the pierced fins. This cooler fits well among other high-TDP air solutions. It offers a balance of thermal performance and visual customization. It suits users who prioritize both cooling capacity and aesthetic integration in their builds.
Check before you buy
- Verify case height clearance for the dual-tower design.
- Check motherboard RAM clearance against tall memory kits.
- Confirm socket compatibility with your specific CPU.
- Ensure a 5V ARGB header is available.
The product at a glance
upHere Dual-Tower ARGB CPU Cooler
Best for: high TDP builds with ARGB lighting needs
- Socket Compatibility
- LGA 1851/1700/2011/2066/115X,AM5/AM4/AM3
- Heat Pipes
- 8
- Tower Design
- Dual Tower
- Fan Size
- 120mm
- TDP Rating
- 280W
- Fan Speed
- 1650 RPM
View on Amazon: upHere Dual-Tower ARGB CPU Cooler Affiliate link
This dual-tower air cooler uses eight direct-touch heat pipes to move heat from the CPU to 106 pierced fins. It includes a 120mm fan that runs up to 1650 RPM, delivering 68 CFM of airflow. The unit supports up to 280W TDP and features 5V ARGB lighting with an infinity mirror effect. It fits Intel LGA 1851 and AMD AM5 sockets, with magnetic covers for quick installation.
Pros
- Eight direct-touch copper heat pipes for efficient heat transfer
- 120mm fan provides 68 CFM airflow at speeds up to 1650 RPM
- Rated for 280W TDP with 106 pierced and folded fins
- 5V ARGB lighting with infinity mirror top design
- Magnetic cover system allows assembly in under 30 seconds
Cons
- Single 120mm fan limits total static pressure compared to dual-fan models
- No software control mentioned for ARGB synchronization
- Lacks explicit noise rating below 27 dB(A) for quiet operation
Good fit if
- You need a cooler rated for high TDP processors
- You want ARGB lighting with an infinity mirror aesthetic
- You prefer quick magnetic installation without fan removal
Skip if
- You require a dual-fan configuration for maximum cooling headroom
- You need software-controlled RGB synchronization
- You are building in a case with strict RAM clearance issues
Verdict: upHere Dual-Tower ARGB CPU Cooler offers strong thermal capacity for its class with its eight heat pipes and 280W TDP rating. It suits builders who want easy installation and visible lighting effects without needing complex software control.
Specifications side by side
| Spec | upHere Dual-Tower ARGB CPU Cooler |
|---|---|
| Socket Compatibility | LGA 1851/1700/2011/2066/115X,AM5/AM4/AM3 |
| Heat Pipes | 8 |
| Tower Design | Dual Tower |
| Fan Size | 120mm |
| TDP Rating | 280W |
| Fan Speed | 1650 RPM |
| Lighting | ARGB |
| Color | Black |
| Features | Fan |
Frequently asked questions
Does the upHere Dual-Tower ARGB CPU Cooler support AM5 sockets?
Yes, this cooler is compatible with AM5 sockets. It also supports AM4 and LGA 1851 platforms. This broad socket coverage makes it suitable for both older AMD systems and newer Intel configurations. You can verify your specific motherboard socket before purchasing to ensure a proper fit.
What is the thermal design power rating for this cooler?
The upHere Dual-Tower ARGB CPU Cooler has a 280W TDP rating. This high thermal capacity allows it to handle demanding processors in high-performance builds. The eight heat pipes help dissipate heat efficiently to maintain stable temperatures under heavy loads.
Is the RGB lighting addressable or standard?
The lighting is addressable RGB, or ARGB. It uses a 5V connection for individual LED control. This allows for more complex color patterns and effects compared to standard RGB. You can sync the lighting with your motherboard software for a unified aesthetic.
Does this cooler include a fan in the box?
Yes, the product attributes list a fan as a included feature. The unit comes with a 120mm PWM fan pre-mounted. This ensures you have immediate airflow capability without needing to purchase additional components separately for basic operation.
Can I install this cooler on Intel LGA 1851 boards?
Yes, the specifications confirm compatibility with LGA 1851. This socket is used by recent Intel processors. The dual-tower design provides ample cooling surface area for these modern chips. You can install it using the provided mounting hardware for your specific socket type.
What color options are available for this CPU cooler?
The listed color for this model is black. The heat pipes and tower structure feature a black finish. This neutral color blends well with most dark-themed PC builds. The ARGB lighting adds color effects without requiring a different base color for the hardware.