upHere 120mm ARGB CPU Air Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This uphere CPU air cooler 4x6mm review covers the upHere 120mm ARGB CPU Air Cooler. It is a single-tower air cooler designed for modern desktop processors. The unit stands out for its 120mm fan size and four 6mm heat pipes. These two specs define its cooling approach. The fan runs at 1650rpm to move 68.2 CFM of air. The heat pipes provide a direct contact area of 25mm to transfer heat from the CPU die to the fins. This combination aims to handle typical thermal loads without excessive noise. The cooler includes ARGB lighting and fits a wide range of sockets.
What stands out
- Four 6mm copper heat pipes for efficient heat transfer
- 120mm fan delivers 68.2 CFM airflow at 1650rpm
- Noise level stays below 26dB(A) for quiet operation
- Non-disassembly fan design allows easy installation without removing RAM
- Universal socket support including AM5, AM4, and LGA 1851
Who it fits
Good fit for
This cooler suits users with mid-range CPUs who need reliable cooling without high noise levels. The 26dB(A) rating makes it ideal for office builds or quiet home PCs. The 120mm fan size fits most standard cases. The non-disassembly fan design is helpful for builders who want to avoid removing memory modules during installation. It works well with AM5 and AM4 processors that do not generate extreme heat. The ARGB lighting adds visual appeal for cases with side panels.
Who should skip it
You should look at another option if you have a high-end CPU that generates significant heat. This single-tower design with four heat pipes may struggle with heavy workloads or overclocking. The 120mm fan size is smaller than dual-tower alternatives, limiting maximum cooling potential. If you need silent operation below 20dB(A), this unit may be too loud. Users with very tall RAM modules should verify clearance, as the cooler height is 6.1 inches. High-performance gaming rigs might benefit from a larger cooler.
Verdict: The upHere 120mm ARGB CPU Air Cooler offers solid cooling performance for mid-range processors with quiet operation. It is a practical choice for standard builds that value ease of installation and aesthetic lighting.
Key specs explained
Fan Size: 120mm
A 120mm fan is the standard size for single-tower CPU air coolers. This size offers a good balance between airflow and physical footprint. You can fit this cooler on most standard ATX cases without major clearance issues. Larger fans like 140mm move more air but require more space. Smaller 92mm fans are quieter at low speeds but less efficient. This 120mm size is a safe choice for general desktop builds.
Heat Pipes: 4
Four 6mm heat pipes transfer heat from the base to the aluminum fins. This count is typical for mid-range air coolers. It provides sufficient thermal capacity for most mainstream processors under standard loads. High-end coolers often use six or eight pipes for extreme overclocking. If you plan to run heavy rendering tasks, more pipes help. For everyday office or gaming work, four pipes are usually adequate to keep temperatures stable.
Fan Speed: 1650rpm ±10%
This maximum speed indicates how fast the fan blades spin. Higher RPMs generally mean more airflow and better cooling performance. At 1650rpm, the fan moves air aggressively. However, higher speeds also increase noise levels. You should check if the fan supports PWM control to lower speed when idle. This spec helps you estimate the cooling potential compared to slower fans. It is a key factor in determining thermal output under load.
Cooler Height: 6.1 inches
The total height of the cooler is 6.1 inches. This measurement is critical for case compatibility. You must ensure your computer case has enough vertical clearance to fit this unit. Tall coolers may block side panels or interfere with RAM modules. Always measure your case interior before purchasing. This height is common for single-tower designs. If you have a compact case, you might need a shorter cooler to ensure proper installation and airflow.
Design and build overview
The listing describes this unit as a black ARGB cooler with a 120mm fan. It uses four 6mm heat pipes to move heat from the CPU. The base contact area is listed at 25mm. This layout directs thermal energy efficiently into the aluminum fins. The fan operates at 1650rpm according to the specs. This speed provides 68.2CFM of airflow while staying under 26dB. You get quiet performance without sacrificing cooling capacity.
The physical dimensions are 5.12 inches long, 2.87 inches wide, and 6.1 inches high. This height is crucial for RAM clearance. The design allows for non-disassembly fan installation. You can mount the cooler without removing your motherboard or memory sticks. Tall RAM modules fit without obstruction. This feature simplifies upgrades for users with bulky memory.
Connectivity is handled via a 4-pin power port running at 12V. This standard interface works with most modern motherboards. The construction uses premium materials for durability. The ARGB lighting adds visual appeal to your build. The black finish matches standard PC cases. You get a straightforward installation process with reliable cooling performance for your processor.
Setup and everyday use guide
Installation begins with verifying socket compatibility. This cooler supports AMD AM5, AM4, and AM3 series, as well as Intel LGA 1851, 1700, 1200, 1155, and 1156. You must ensure your motherboard matches one of these sockets before proceeding. The listing highlights non-disassembly fan installation. This design allows you to mount the fan directly to the heatsink without removing the motherboard or existing RAM. This feature is practical if you have tall memory modules, as the cooler is designed with specific clearance to prevent obstruction of RAM slots.
Physical dimensions matter for case fit. The unit stands 6.1 inches tall. You need to check your case’s maximum CPU cooler height to ensure this fits without interfering with side panels or other components. The fan size is 120mm, which is standard for single-tower coolers. This size balances airflow with a manageable footprint for most mid-tower cases.
Power connectivity uses a standard 4-pin header operating at 12V. You connect this to a motherboard fan header to control speed. The fan runs at a maximum of 1650rpm. This speed generates 68.2 CFM of airflow. Noise levels are listed below 26dB(A). In daily use, this suggests quiet operation under typical loads. The ARGB lighting connects separately to provide visual effects. You manage the lighting through your motherboard’s software. The sturdy construction implies long-term reliability without frequent maintenance.
Before You Buy This Cooler
Before you install this cooler, check your case dimensions. The listing states a height of 6.1 inches. You must verify your case supports this clearance to avoid fitting issues. Also, measure RAM height. The design includes clearance for tall memory modules, but you should confirm your specific sticks fit without obstruction. Power connectivity requires a 4-pin header on your motherboard. Ensure you have an available ARGB port if you want to enable the lighting effects. The fan runs at 1650rpm, which provides 68.2CFM of airflow. This is efficient for single-tower designs. Keep the fins clean to maintain performance. Dust accumulation reduces airflow over time. Regularly use compressed air to remove debris. This cooler fits well among other single-tower options. It offers solid specs for mainstream processors. If you need higher cooling capacity, consider dual-tower models. For most users, this unit provides adequate cooling with quiet operation below 26dB. It is a practical choice for standard builds.
Check before you buy
- Verify your case supports 6.1 inches of cooler height.
- Check RAM clearance to ensure tall sticks fit.
- Confirm motherboard has a 4-pin fan header.
- Ensure an ARGB port is available for lighting.
The product at a glance
upHere 120mm ARGB CPU Air Cooler
Best for: mid-range CPUs and tall RAM clearance
- Socket Compatibility
- AM5/AM4, LGA 1851/1700/1200/1155/1156
- Cooler Height
- 6.1 inches
- Heat Pipes
- 4
- Fan Size
- 120mm
- Fan Speed
- 1650rpm ±10%
- Lighting
- ARGB
View on Amazon: upHere 120mm ARGB CPU Air Cooler Affiliate link
This upHere air cooler uses four 6mm heat pipes to move heat away from your CPU. The 120mm fan spins up to 1650rpm, pushing 68.2 CFM of air while staying under 26dB. It fits AM5, AM4, and Intel LGA sockets. The design includes ARGB lighting and clears tall RAM sticks. It suits users who want quiet operation and easy installation without removing the motherboard.
Pros
- Four 6mm heat pipes for efficient heat dissipation
- 120mm fan delivers 68.2 CFM airflow
- Noise level stays below 26dB(A)
- Clears tall RAM modules for easy installation
Cons
- Single 120mm fan limits cooling capacity compared to dual-fan models
- Maximum fan speed of 1650rpm may be insufficient for high-TDP CPUs
- No mention of PWM fan curve control or software integration
Good fit if
- You need a low-noise solution for standard office or gaming builds
- You have tall RAM that blocks standard cooler designs
- You want ARGB lighting without complex wiring
Skip if
- You run high-TDP processors that require dual-tower cooling
- You need software-based fan speed control
- You prefer silent operation below 20dB under load
Verdict: upHere 120mm ARGB CPU Air Cooler provides adequate cooling for mid-range CPUs with a focus on low noise and RAM clearance. It fits users who prioritize quiet operation and easy installation over maximum thermal performance.
Specifications side by side
| Spec | upHere 120mm ARGB CPU Air Cooler |
|---|---|
| Socket Compatibility | AM5/AM4, LGA 1851/1700/1200/1155/1156 |
| Cooler Height | 6.1 inches |
| Heat Pipes | 4 |
| Fan Size | 120mm |
| Fan Speed | 1650rpm ±10% |
| Lighting | ARGB |
| Color | Black |
| Features | Fan |
| Dimensions | 5.12 × 2.87 × 6.1 inches |
Frequently asked questions
Does the upHere 120mm ARGB CPU Air Cooler fit in small cases?
You must check your case height before buying. This cooler measures 6.1 inches in height. If your case supports less than this clearance, the unit will not fit. You should measure the space above your motherboard socket to ensure proper installation without interference from case walls.
Is this cooler compatible with Intel LGA 1700 sockets?
Yes, the upHere 120mm ARGB CPU Air Cooler supports LGA 1700. It also works with LGA 1851, AM4, and AM5 sockets. You can verify your motherboard socket type in the manual. This broad compatibility makes it suitable for many modern Intel and AMD desktop processors.
How wide is the upHere cooler and will it block RAM?
The cooler is 2.87 inches wide. This narrow profile helps avoid blocking tall RAM sticks. You should still measure your memory height to ensure full clearance. The design focuses on allowing access to DIMM slots, which is helpful for systems with high-profile memory modules.
What kind of lighting does this CPU cooler have?
This unit features ARGB lighting. You can sync the colors with compatible motherboard software for a unified look. The fan and tower include this lighting effect. It adds visual appeal without impacting the cooling performance or physical dimensions of the air cooler.
Is the upHere 120mm suitable for high-end gaming CPUs?
This cooler is best for mid-range CPUs. It provides adequate cooling for general tasks and moderate loads. It prioritizes low noise and easy installation over maximum thermal performance. If you run extreme overclocks or heavy rendering workloads, you might need a larger dual-tower solution.
Does this cooler come with a fan attached?
Yes, the listing specifies it includes a 120mm fan. The fan is black and integrates with the ARGB lighting. You do not need to purchase a separate fan for basic operation. The fan size matches the standard single-tower form factor for easy case compatibility.
What is the depth of the upHere air cooler?
The unit is 5.12 inches in length. This dimension affects how it sits relative to the rear exhaust fan. You should ensure there is enough space behind the CPU socket for airflow. This depth is standard for single-tower coolers and fits most mid-tower chassis layouts.