Tsnamay 2.36 Inch/60mm PC Cooler Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This tsnamay 2 36 inch 60mm PC cooler review focuses on a dust filter, not a heat sink. The Tsnamay 60mm Fan Dust Filter protects your components from debris. It measures 2.36 inches square and fits 60mm fans. The unit uses ABS resin for durability and nylon mesh for filtration. It offers IP54 protection against dust and water splashes. The package includes four covers. This accessory helps maintain airflow and cleanliness in your computer case without adding cooling performance. It is a simple, passive solution for routine maintenance.
What stands out
- IP54 protection grade for indoor use between -10 to +55 degrees
- Nylon filter provides up to 89% dust-proof efficiency
- ABS resin construction is fireproof and heatproof
- Reusable and cleanable design reduces noise levels
Who it fits
Good fit for
This filter suits users who want to keep their PC internals clean without altering cooling performance. It is ideal for owners of cases with 60mm intake fans. The IP54 rating makes it suitable for dusty environments. You can reuse the filters and clean them easily. It fits well in setups where component longevity matters more than extreme thermal headroom. The simple installation process appeals to those who prefer low-maintenance hardware care.
Who should skip it
You should look elsewhere if you need active cooling for high-TDP CPUs. This product does not lower temperatures. It is not a heat sink or fan. It also lacks included screws, so you must use existing hardware. If you require a comprehensive thermal solution, this dust cover alone will not suffice. Buyers seeking significant temperature drops or complex mounting options will find this item insufficient for their needs.
Verdict: The Tsnamay 60mm Fan Dust Filter is a practical, spec-driven accessory for maintaining cleanliness. It offers solid protection for 60mm fans without interfering with airflow.
Key specs explained for this filter
Size: 60MM
This dimension matches standard 60mm fan holes in computer cases. You need this size to ensure the filter fits your existing hardware. If you are buying a CPU air cooler, check its fan size. Most large coolers use 120mm fans. This filter is only for small 60mm fans. Do not expect it to work with standard tower coolers. Verify your case has 60mm mounting points before purchasing.
Material: ABS resin
ABS resin is a strong plastic that resists heat and fire. This makes the cover safe near warm electronics. You do not need to worry about melting near your CPU. This material is common in PC cases. It is lighter than metal. It also dampens vibration noise. When comparing options, look for fireproof ratings. This material helps the filter last longer without cracking over time.
Dust-proof efficiency: up to 89%
This rating means the nylon mesh blocks most dust particles. Your fans will stay cleaner for longer. You will need to clean the case less often. This is useful for dusty rooms or homes with pets. It keeps internal components free of debris. This efficiency helps maintain airflow. Compare this to open mesh guards. Higher percentages offer better protection. This level is effective for general indoor use.
Protection grade: IP54
IP54 means the cover blocks dust ingress and resists water splashes. It protects against accidental spills. It also keeps out larger dust clumps. This is good for indoor environments. It is not waterproof for direct rain. Use it inside your computer case. This rating ensures basic safety for electronics. It adds a layer of defense. Check this rating if you live in a humid area.
ABS Resin and Nylon Build
The listing states the unit is made from ABS resin. This material is described as fireproof and heatproof. You should expect stable performance within the specified temperature range of -10 to +55 degrees. The filter mesh uses nylon fabric. According to the listing, this combination provides up to 89% dust-proof efficiency. This construction keeps internal components clean without adding significant bulk.
The dimensions are listed as 2.36 inches in width, height, and length. This square footprint matches standard 60mm fan holes. You will need to use your existing fan screws for installation, as the package does not include hardware. The design allows for simple mounting on your case or cooler. The mesh covers the entire 60mm area to block debris effectively.
Maintenance is straightforward. You can clean and reuse the filters. The listing notes that this design also helps reduce noise levels. You receive four pieces in the package. This count allows you to cover multiple fans or keep spares. The IP54 protection grade suggests it is suitable for indoor use. You can rely on this build for basic component protection in a standard desktop setup.
Setup and everyday use
Installing the Tsnamay 60mm Fan Dust Filter requires minimal effort. The package includes four covers, each measuring 2.36 inches square. You align the filter with your existing 60mm fan holes. The listing notes that screws are not included. You must use the screws already attached to your fans or case. This ensures a secure fit without extra parts. The design allows for straightforward mounting. Once installed, the filter sits directly over the fan intake. It blocks dust from entering the system. The nylon mesh provides up to 89% dust-proof efficiency. This keeps internal components cleaner over time. Maintenance is simple. The unit is reusable and cleanable. You can remove it periodically to clear accumulated debris. This helps maintain airflow and potentially reduces noise levels. The ABS resin construction ensures durability. It remains stable within a temperature range of -10 to +55 degrees. The IP54 protection grade offers resistance to dust and water splashes. This makes it suitable for indoor environments. The fireproof and heatproof properties add safety. You do not need to worry about degradation under normal operating conditions. The filter fits seamlessly into standard PC cases. It does not interfere with fan rotation. The 60mm size matches common small fans used in cases or as exhaust units. If you need different sizes, variations exist for 40mm, 50mm, 80mm, 92mm, and 120mm fans. However, for this specific model, the 60mm dimension is fixed. Everyday use involves leaving the filter in place permanently. It acts as a barrier against particulates. You only interact with it during cleaning. This passive protection helps extend the life of your hardware. No software or complex adjustments are required. The setup is complete once the filters are secured with your existing hardware.
Check Compatibility And Maintenance Needs
You need to verify your case fan size before purchasing this item. The Tsnamay filter is designed strictly for 60mm fans. If your system uses 120mm or 140mm units, this cover will not fit. You must also check your mounting holes. The listing states that screws are not included. You will need to reuse existing fasteners from your current fan setup. Keep in mind that this is a dust filter, not a cooling solution. It does not lower temperatures. It only blocks debris. You should view it as a complement to your CPU air cooler, not a replacement. Regular maintenance is required. The nylon mesh is reusable and cleanable. You should wipe it down periodically to maintain airflow. This accessory helps keep your PC components clean, which supports the longevity of your primary cooling hardware. It is a simple, passive addition to your build.
Check before you buy
- Confirm your case fans are exactly 60mm in size
- Verify you have existing screws for installation
- Ensure this is for dust protection, not cooling
- Check temperature range limits for your environment
- Plan for regular cleaning of the nylon mesh
The product at a glance
Tsnamay 60mm Fan Dust Filter
Best for: 60mm fan intake dust protection
- Features
- Fan
- Dimensions
- 2.36 × 2.36 × 2.36 inches
View on Amazon: Tsnamay 60mm Fan Dust Filter Affiliate link
This Tsnamay cover protects 60mm fan intakes from dust and debris. It uses ABS resin and a nylon filter to block up to 89% of dust. The unit measures 2.36 inches on all sides and handles temperatures from -10 to +55 degrees Celsius. It carries an IP54 rating for general protection. You get four covers per package. This fits cases with 60mm fan mounts that need extra filtration.
Pros
- 89% dust-proof efficiency via nylon filter
- Fireproof and heatproof ABS resin construction
- IP54 protection grade for indoor use
- Reusable and cleanable design
- Includes four 60mm covers
Cons
- Screws are not included for installation
- Only covers fan intakes, not exhausts
- Limited to 60mm fan size compatibility
Good fit if
- You want to reduce dust buildup in a 60mm fan slot
- You need a simple, reusable filter for a case mesh area
- You have existing screws for mounting
Skip if
- You need a complete cooling solution with airflow generation
- You use 40mm, 80mm, or 120mm fans instead of 60mm
- You require included mounting hardware
Verdict: Tsnamay 60mm Fan Dust Filter offers basic dust protection for 60mm intakes. It suits users who want to keep components clean without adding active cooling.
Specifications side by side
| Spec | Tsnamay 60mm Fan Dust Filter |
|---|---|
| Features | Fan |
| Dimensions | 2.36 × 2.36 × 2.36 inches |
| Size | 60MM |
| Model | TSCP3666 |
Frequently asked questions
Is the Tsnamay 60mm Fan Dust Filter a CPU cooler?
No, this product is not a CPU cooler. It is a passive dust filter designed to protect components from debris. The Tsnamay 60mm Fan Dust Filter does not provide active cooling or heat dissipation. It simply fits over your existing 60mm fan intake to keep dust out.
What are the exact dimensions of the Tsnamay filter?
The filter measures 2.36 inches in width, height, and length. These dimensions correspond to the standard 60mm fan size. The model number TSCP3666 confirms this specific size. You must ensure your case has 60mm mounting holes for this item to fit correctly.
Does the package include mounting screws?
No, the listing states that screws are not included. You must use your own hardware to secure the filter to your case. The package contains four covers. You will need to source compatible screws separately to attach the filter to your 60mm fan holes.
What materials are used to build the Tsnamay filter?
The unit is constructed from ABS resin and nylon fabric. The ABS resin is described as fireproof and heatproof. This material ensures stability within a temperature range of -10 to +55 degrees. The mesh uses nylon fabric to effectively block dust particles from entering your system.
How many dust filters are included in the box?
The package includes four covers. Each cover measures 2.36 inches square. This quantity allows you to protect multiple 60mm fan intakes in your computer case. You can install them on various intake points to maintain a clean internal environment for your components.
Can I use this filter with 120mm fans?
No, this item is designed strictly for 60mm fans. It will not fit 120mm or 140mm fan holes. The dimensions are fixed at 2.36 inches square. You must verify your case fan size before purchasing. Using it on larger fans is not possible due to the size mismatch.