TRONSTORE K69237-001 CPU Cooler Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This tronstore k69237 001 CPU cooler review examines the TRONSTORE TS1, a compact air cooler designed for basic desktop cooling needs. It features a 92mm fan paired with an aluminum heatsink and copper core base. The unit measures 3.62 by 3.62 by 2.2 inches and weighs just 5.6 ounces. It connects via a 4-pin PWM connector for speed control. This setup targets users seeking a straightforward, no-frills solution for standard Intel processors without requiring complex installation steps.
What stands out
- 92mm fan with 4-pin PWM connector for adjustable speeds
- Aluminum heatsink with copper core base for heat transfer
- Supports LGA 1200, 1151, and 1150 sockets
- Pre-applied thermal paste and tool-free push pin installation
- Compact dimensions of 3.62 x 3.62 x 2.2 inches
Who it fits
Good fit for
This cooler suits users with Intel Core i3 or i5 processors that do not generate excessive heat. It fits well in small form factor cases where space is limited, given its small footprint. The tool-free installation is ideal for first-time builders who want to avoid complicated mounting brackets. It is also a good match for office PCs or home theater systems where quiet, passive cooling performance is sufficient for daily tasks.
Who should skip it
You should skip this option if you use high-end Intel Core i7 or i9 processors. The 92mm fan and aluminum construction lack the surface area needed for heavy workloads like video editing or gaming. It is also unsuitable for AMD sockets, as it only supports specific Intel LGA types. If you need higher airflow or larger heat dissipation capacity, this compact design will likely struggle to keep temperatures low under load.
Verdict: The TRONSTORE TS1 is a basic, space-saving cooler for light Intel CPUs. It works for low-power builds but is not enough for demanding tasks.
Key specs explained for this cooler
Fan Size: 92mm Fan
A 92mm fan is smaller than the common 120mm or 140mm options. This size allows the cooler to fit in tight cases where larger fans will not clear surrounding components. You gain flexibility in small form factor builds. However, smaller fans often need to spin faster to move the same amount of air. This can lead to higher noise levels under heavy load. If you prioritize quiet operation, you might prefer a larger fan size.
Material: Copper, Aluminum
This cooler uses an aluminum heatsink with a copper core base. Aluminum is lightweight and cost-effective for the bulk of the fins. Copper conducts heat away from the CPU base more efficiently than aluminum. The combination helps transfer heat from the processor into the fins quickly. You get decent thermal performance without the heavy weight of a pure copper design. This setup is standard for budget-friendly air coolers in this category.
Socket Compatibility: LGA 1200, LGA 1150, LGA 1151
This list shows which Intel motherboards the cooler supports. It works with older and mid-range Intel platforms. You can install it on systems using LGA 1150, 1151, or 1200 sockets. If you have a newer LGA 1700 board, this cooler will not fit. Always check your motherboard socket before buying. This compatibility limits the cooler to specific generations of Intel desktop processors. It is not a universal solution for all modern Intel systems.
Weight: 5.6 ounces
At 5.6 ounces, this unit is very light. A lighter cooler puts less stress on the motherboard socket. This reduces the risk of warping or damaging the CPU socket over time. It also makes installation easier since you do not need to support a heavy unit. The low weight comes from the aluminum construction. You should ensure your motherboard standoffs are secure to handle any movement during handling.
Design and build details
According to the listing, the TRONSTORE TS1 uses an aluminum heatsink with a copper core base. This combination aims to balance heat absorption and dissipation. The copper base contacts the CPU directly to transfer heat quickly. The aluminum fins then spread that heat across a larger surface area for the fan to move away. This design is standard for budget air coolers and suits modest thermal loads.
The unit measures 3.62 by 3.62 by 2.2 inches and weighs 5.6 ounces. Its compact footprint allows it to fit in small form factor cases where larger coolers might block RAM slots or other components. The 92mm fan size further reduces overall height and width, making it a practical choice for tight spaces. You should check your case clearance to ensure it fits without interference.
Controls come via a 4-pin PWM connector with an 8-inch cable. This allows the motherboard to adjust fan speed based on temperature. The cooler supports LGA 1200, LGA 1150, and LGA 1151 sockets. Installation uses tool-free push pins, which simplifies mounting for most users. The listing does not mention additional finishes or RGB lighting, keeping the focus on functional cooling performance.
Setup and everyday use
Installation relies on a tool-free push pin system. This design allows you to mount the cooler without needing additional tools. The unit supports Intel LGA 1200, LGA 1150, and LGA 1151 sockets. It also lists compatibility with sockets 1155 and 1156. You can use it with Intel Core i3, i5, i7, and i9 processors. The package includes pre-applied thermal paste. This saves you the step of applying paste yourself before mounting. The fan connects via a 4-pin PWM connector. The cable length is eight inches. This provides some flexibility in routing the wire to your motherboard header. The fan operates at 12V DC. PWM control lets your system adjust fan speed based on temperature. Daily use involves the cooler managing heat for your desktop processor. The 92mm fan size means it fits in cases with limited space. You do not need to worry about clearance issues with large RAM sticks or other components nearby. The aluminum fins and copper base work together to move heat away from the CPU. The entire assembly weighs 5.6 ounces. This light weight reduces stress on the motherboard socket during operation. You simply install the cooler, connect the power cable, and start your computer. The system handles the rest by adjusting fan speeds as needed. This setup is straightforward for users who want a simple cooling solution.
Before you buy this cooler
This compact cooler suits basic desktop cooling needs. Its 92mm fan and aluminum heatsink with copper core base handle standard Intel processors. You must verify your motherboard supports LGA 1200, 1150, 1151, 1155, or 1156 sockets. The tool-free push pin installation simplifies mounting, but ensure your case clearance exceeds 2.2 inches in height. Since it uses a 4-pin PWM connector, confirm your motherboard has an available CPU_FAN header with an 8-inch cable reach. Upkeep is minimal; the pre-applied thermal paste lasts for initial use, but you may need to replace it after removing the unit. This option fits well for users prioritizing small form factors over extreme performance. It complements larger air coolers by offering a low-profile alternative for tight spaces. Avoid pairing it with high-TDP chips that require robust heat dissipation. Check your case dimensions and socket compatibility before purchasing to ensure a proper fit.
Check before you buy
- Verify motherboard socket compatibility for LGA 1200, 1150, 1151, 1155, or 1156.
- Ensure case height clearance exceeds 2.2 inches for proper installation.
- Confirm CPU_FAN header availability with sufficient 8-inch cable length.
- Check if your processor TDP matches this compact cooler's capabilities.
The product at a glance
TRONSTORE TS1 92mm CPU Cooler
Best for: basic Intel desktop cooling
- Socket Compatibility
- Socket 1200, 1151, 1150, 1155, 1156
- Fan Size
- 92mm
- System Type
- Desktop
- Material
- Copper, Aluminum
- Features
- Fan
- Dimensions
- 3.62 × 3.62 × 2.2 inches
View on Amazon: TRONSTORE TS1 92mm CPU Cooler Affiliate link
This TRONSTORE cooler uses a copper core base and aluminum fins for heat transfer. The 92mm fan connects via a 4-pin PWM cable for speed control. It fits LGA 1200 and 115x sockets. The unit is small, weighing just 5.6 ounces. You should choose this if you need a compact solution for basic Intel desktop processors.
Pros
- Copper core base with aluminum heatsink
- 4-pin PWM fan for speed control
- Supports LGA 1200 and 115x sockets
- Pre-applied thermal paste included
Cons
- 92mm fan size limits airflow capacity
- Only supports Intel socket types
- Small heatsink dimensions restrict cooling power
Good fit if
- You need a compact cooler for small cases
- You use an Intel LGA 1200 or 115x processor
- You want a simple tool-free installation
Skip if
- You have a high-TDP AMD processor
- You need cooling for heavy overclocking
- You require large 120mm or 140mm fans
Verdict: TRONSTORE K69237-001 92mm CPU Cooler fits users with modest Intel CPUs who need a small, affordable air cooler.
Specifications side by side
| Spec | TRONSTORE TS1 92mm CPU Cooler |
|---|---|
| Socket Compatibility | Socket 1200, 1151, 1150, 1155, 1156 |
| Fan Size | 92mm |
| System Type | Desktop |
| Material | Copper, Aluminum |
| Features | Fan |
| Dimensions | 3.62 × 3.62 × 2.2 inches |
| Weight | 5.6 ounces |
| Model | TS1 |
Frequently asked questions
Does the TRONSTORE K69237-001 fit AMD sockets?
No, this cooler is designed for Intel processors only. The published specifications list compatibility with LGA 1200, LGA 1150, and LGA 1151 sockets. It does not support AMD AM4 or other AMD platforms. You must verify your motherboard uses one of the listed Intel socket types before purchasing.
What is the maximum height of this cooler?
The unit measures 2.2 inches in height. This compact profile allows it to fit inside smaller computer cases where taller coolers would block side panels or RAM slots. You should check your case specifications to ensure the internal clearance exceeds 2.2 inches for proper installation.
Is this cooler suitable for gaming?
This model is best for basic desktop cooling rather than high-performance gaming. It features a single 92mm fan and a modest aluminum heatsink with a copper base. These components are intended for standard Intel processors with lower thermal outputs. Heavy gaming loads may exceed its cooling capacity.
How heavy is the TRONSTORE TS1 cooler?
The cooler weighs 5.6 ounces. This lightweight design reduces stress on your motherboard socket compared to heavier tower coolers. The low weight is a result of its small 92mm fan and compact aluminum and copper construction. It is easy to handle during installation.
Does it include thermal paste?
The provided data does not specify if thermal paste is included in the box. The listing highlights the fan and heatsink materials but omits details about included accessories. You should assume you need to purchase thermal paste separately to ensure proper heat transfer between the copper base and your CPU.
Can I use this on a LGA 1700 socket?
No, this cooler does not support LGA 1700. The specifications explicitly list compatibility for LGA 1200, LGA 1150, and LGA 1151. Newer Intel platforms like LGA 1700 require different mounting hardware. You will need a cooler specifically designed for the LGA 1700 socket.
What material is the heatsink made of?
The heatsink combines aluminum fins with a copper core base. The copper base contacts the CPU to absorb heat efficiently. The aluminum fins then dissipate that heat into the airflow generated by the 92mm fan. This combination balances cost and thermal performance for basic cooling needs.
Is the fan speed adjustable?
The product data does not mention PWM or adjustable fan speed controls. It lists the feature simply as a fan without specifying variable speed capabilities. You should expect a fixed or basic voltage-controlled speed based on the connector type. Check your motherboard headers for the specific control method.