Thermalright-TR AXP120-X67 Low Profile CPU Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This thermalright tr axp120 x67 low profile CPU review examines a compact air cooling solution designed for small form factor builds. The cooler stands out with a total height of just 67mm, allowing it to fit inside cases with limited clearance. It pairs this slim profile with a standard 120mm PWM fan, ensuring you get effective airflow without needing a larger chassis. The design relies on six pure copper heat pipes to move heat away from the processor efficiently. You get a balance of low height and standard fan size, making it a practical choice for tight spaces.
What stands out
- 67mm total height fits small cases
- Six 6mm pure copper heat pipes
- 120mm PWM fan with 59CFM airflow
- Noise level capped at 26.1dB(A)
- Supports AM5 and LGA1851 sockets
Who it fits
Good fit for
You should choose this cooler if you are building in a small form factor case with strict height limits. The 67mm profile ensures compatibility with many mini-ITX and micro-ATX cases. It suits users who need a standard 120mm fan for easy replacement or upgrade options later. The support for modern sockets like AM5 and LGA1851 makes it relevant for new builds. It is also good for those who prioritize quiet operation, as the fan noise stays under 26.1dB.
Who should skip it
Skip this option if you run a high-end CPU that generates significant heat. The low-profile design and aluminum fins may not dissipate enough heat for power-hungry processors. If you need maximum cooling performance over case compatibility, a tower cooler with a larger surface area is better. This cooler is not ideal for overclocking. It is also less suitable if you require a 140mm fan for even lower noise and higher airflow, as this unit is limited to the 120mm size.
Verdict: The Thermalright AXP120-X67 is a capable low-profile cooler for compact builds. It offers solid compatibility and quiet operation within its height constraints.
Key specs explained
Cooler Height: 67 mm
This low-profile dimension allows the cooler to fit in cases with tight RAM clearance. You can use taller memory modules without interference. It suits small form factor builds where space is limited. Compare this height with standard 150mm towers when choosing a case. A lower profile ensures compatibility with many mini-ITX chassis designs.
Fan Size: 120 mm
A 120mm fan moves more air than smaller 80mm options while spinning slower. This design helps maintain quiet operation during idle loads. You get efficient cooling without high noise levels. It is a standard size, making replacement fans easy to find. This size balances airflow and acoustic performance for general desktop use.
Heat Pipes: 6
Six heat pipes transfer heat from the CPU base to the fins quickly. This configuration handles higher thermal loads than models with fewer pipes. It helps maintain stable temperatures under sustained workloads. You benefit from consistent cooling performance. Compare this count with other coolers to gauge potential thermal capacity for your specific processor.
Fan Speed: 1800 RPM
This maximum speed indicates a focus on quiet operation rather than extreme airflow. The fan runs at 1800 RPM to keep noise levels low. You will experience less audible fan noise during typical use. This setting is ideal for users who prioritize silence. Check if your motherboard supports PWM control to adjust speed further based on temperature.
Design and build details
The cooler measures 123.5 by 120 by 67 millimeters. This compact footprint allows it to fit in small cases with tight RAM clearance. The heat sink uses aluminum fins bonded to a pure copper base. According to the listing, the base connects to six 6mm heat pipes via a full electroplating reflow welding process. These pipes use AGHP third-generation technology to manage heat against gravity. This design helps maintain performance regardless of whether you mount the cooler vertically or horizontally.
It includes a 120x120x15mm PWM fan, model TL-C12015. The fan weighs 0.12kg and draws power via a standard 4-pin connector. It operates at 12V and can reach 1800 RPM. The listing states this provides up to 59 CFM of airflow with noise levels at or below 26.1 dB(A). The fan is attached to the aluminum radiator material to move air across the fins efficiently. This combination supports extreme cooling performance for its size.
The unit comes with metal fasteners for Intel and AMD platforms. It supports sockets including LGA1700, LGA1851, LGA1200, AM4, and AM5. This broad compatibility means you can use it in many modern systems without needing extra adapters. The included thermal paste is intended to improve heat transfer from the CPU to the copper base. This setup ensures a secure and effective connection for low-profile builds.
Setup and daily operation notes
Installation involves attaching the cooler to your motherboard using the provided metal fasteners. The listing specifies that mounting plates or fastener parts are included for different CPU socket platforms. You will need to verify that your specific socket is supported. The cooler lists compatibility with Intel LGA 1150, 1151, 1155, 1156, 1200, 1700, 1851, 2011, and 2066. For AMD systems, it supports AM4 and AM5 sockets. Ensure you select the correct bracket for your board before tightening the screws. The unit comes with attached heat transfer paste to aid initial setup. This paste helps improve heat transfer from the CPU to the pure copper base. Daily use relies on the included 120mm TL-C12015 PWM fan. You connect this fan to a 4-pin header on your motherboard. The fan operates at 12V and runs at 1800 RPM, with a tolerance of plus or minus ten percent. This speed generates up to 59 CFM of airflow. The listing states the noise level stays at or below 26.1 dB(A). This quiet operation is suitable for sustained workloads. The six 6mm heat pipes use AGHP third-generation technology. This design addresses the inverse gravity effect, ensuring consistent cooling regardless of whether the cooler is mounted vertically or horizontally. The full electroplating reflow welding process on the pipes helps maintain thermal efficiency over time. You simply monitor fan curves in your BIOS to adjust performance based on your thermal needs.
Before You Buy This Cooler
You need to verify your case clearance before purchasing. This unit measures 67 mm in height, so you must confirm your case supports low-profile coolers. Check your RAM height as well, since the 120 mm fan sits directly above the memory slots. The listing includes mounting hardware for Intel LGA 1700, 1200, 115x, 2011, 2066, and 1851, as well as AMD AM4 and AM5 sockets. Ensure your specific socket is in this list. You should also check if your case allows a 120 mm fan width. Upkeep is minimal. The fan is a standard 4-pin PWM model, so you can adjust speeds in your BIOS if needed. Dust accumulation on the aluminum fins may reduce efficiency over time. You can gently clean them with compressed air. This cooler fits alongside other low-profile options in our guide. It suits builds where space is tight but you still want effective cooling. Standard towers are not suitable here.
Check before you buy
- Confirm case supports 67 mm cooler height
- Check RAM clearance with 120 mm fan installed
- Verify your CPU socket is in the compatibility list
- Ensure case width allows 120 mm fan installation
The product at a glance
Thermalright AXP120-X67 Low Profile Cooler
Best for: compact cases with 67 mm height limit
- Socket Compatibility
- AM4, AM5, LGA1700, LGA1851, LGA1200
- Cooler Height
- 67 mm
- Heat Pipes
- 6
- Tower Design
- Low-Profile
- Fan Size
- 120 mm
- Fan Speed
- 1800 RPM
View on Amazon: Thermalright AXP120-X67 Low Profile Cooler Affiliate link
This low-profile air cooler stands 67 mm tall, making it suitable for compact cases. It uses six pure copper heat pipes with sintered technology to move heat efficiently. The included 120 mm PWM fan runs up to 1800 RPM, delivering 59 CFM of airflow while staying under 26.1 dB. It supports major Intel and AMD sockets. You get reliable cooling in a small footprint without needing a large tower.
Pros
- 67 mm total height fits small cases
- Six pure copper heat pipes for efficient transfer
- 120 mm PWM fan provides 59 CFM airflow
- Supports AM4, AM5, and LGA 1700/1851 sockets
Cons
- 67 mm height limits compatibility with tall RAM sticks
- Fan noise cap of 26.1 dB may not suit silent builds
- Aluminum fins offer less thermal mass than all-copper designs
Good fit if
- You need a cooler under 70 mm for a mini-ITX case
- You use AM5 or LGA 1700 processors
- You prioritize case compatibility over maximum cooling headroom
Skip if
- You have tall RAM that blocks low-profile coolers
- You need a cooler taller than 70 mm
- You require an all-copper heat sink design
Verdict: Thermalright AXP120-X67 Low Profile Cooler fits users who need a 67 mm tall air cooler for compact cases. It delivers solid performance for AM5 and LGA 1700 CPUs in small form factors.
Specifications side by side
| Spec | Thermalright AXP120-X67 Low Profile Cooler |
|---|---|
| Socket Compatibility | AM4, AM5, LGA1700, LGA1851, LGA1200 |
| Cooler Height | 67 mm |
| Heat Pipes | 6 |
| Tower Design | Low-Profile |
| Fan Size | 120 mm |
| Fan Speed | 1800 RPM |
| Features | Fan |
| Dimensions | 4.86 × 4.72 × 2.64 inches |
Frequently asked questions
Does the Thermalright AXP120-X67 support the latest AM5 socket?
Yes, this cooler is compatible with the AM5 socket. The published specifications list AM5 alongside other modern platforms like LGA 1851 and LGA 1700. This ensures you can install it on recent Ryzen processors without needing separate mounting hardware. It is designed for users upgrading to current generation AMD CPUs.
How many heat pipes does the AXP120-X67 feature?
The cooler includes six heat pipes. This configuration helps transfer heat efficiently from the CPU base to the aluminum fins. The six pipes are standard for this class of low-profile air coolers. This setup supports effective thermal dissipation in compact cases where airflow might be restricted.
Will this cooler fit in a case with 67 mm clearance?
Yes, the total height of this unit is exactly 67 mm. It is specifically engineered for cases with this strict height limit. You should verify that your case supports low-profile coolers before purchase. This dimension allows it to fit alongside taller RAM modules in small form factor builds.
Is the fan included with the Thermalright AXP120-X67?
Yes, the product listing indicates that a fan is included with the cooler. The features section explicitly lists the fan as part of the package. You do not need to purchase a separate 120 mm fan to complete the assembly. This simplifies the setup process for new builders.
What is the width of the AXP120-X67 cooler?
The width of the cooler is 4.72 inches. This measurement corresponds to the standard 120 mm fan size. It fits most standard motherboard layouts without extending too far over the RAM slots. This width is typical for low-profile coolers designed to maintain compatibility with standard PC cases.
Does this cooler support Intel LGA 1700 motherboards?
Yes, the specifications confirm support for the LGA 1700 socket. This includes compatibility with 12th, 13th, and 14th Gen Intel Core processors. The mounting hardware is designed to secure the cooler firmly to these platforms. You can use it for Intel builds without checking for additional adapter plates.
What are the exact dimensions of the Thermalright AXP120-X67?
The dimensions are 4.72 inches in width, 2.64 inches in height, and 4.86 inches in length. These compact measurements allow it to fit in tight spaces. The height is the most critical dimension for case compatibility. The length and width align with standard 120 mm fan footprints.
Is this cooler suitable for LGA 115x sockets?
Yes, the cooler supports LGA 1150, LGA 1151, and LGA 1200 sockets. This covers many older Intel motherboard platforms. You can install it on these legacy systems using the provided mounting solutions. It offers a versatile option for users maintaining older builds with low-profile cooling needs.