Thermalright Thermalrlght Silver Soul 110 Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This thermalright thermalrlght silver soul 110 review focuses on a compact air cooler designed for space-constrained builds. The unit stands out primarily for its low profile and active cooling performance. It measures just 110mm in height, allowing it to fit inside most medium and large computer cases without interfering with tall RAM modules. The cooling capacity is driven by a 92mm PWM fan that spins up to 2500 RPM. These two specifications, height and fan speed, define its practical use case for users needing efficient heat dissipation in tight enclosures.
What stands out
- 110mm height fits most medium to large cases
- 92mm PWM fan reaches 2500 RPM for strong airflow
- 5 heat pipes use AGHP to handle gravity effects
- S-FDB bearings ensure long service life and low noise
Who it fits
Good fit for
You should consider this cooler if you are building in a case with limited CPU cooler clearance. The 110mm height ensures compatibility with many popular chassis without requiring you to sacrifice RAM slots. It also suits users who want a quiet operation under load, as the S-FDB bearings keep noise levels at or below 23dB. If you need broad socket support for both Intel and AMD platforms, this model covers the essential LGA 1700, AM4, and AM5 connections.
Who should skip it
You should skip this option if you require maximum cooling performance for high-end overclocking. The 92mm fan size is smaller than the standard 120mm or 140mm fans found in larger air coolers, which limits its total airflow potential. It is also not ideal if you need a dual-tower design for extreme thermal loads, as the single tower structure may struggle with high-TDP processors. Additionally, if you prefer a larger 120mm fan for even quieter operation at lower speeds, this model will not meet your needs.
Verdict: The Thermalright Silver Soul 110 is a practical choice for compact builds that need reliable cooling without sacrificing RAM clearance. Its low profile and efficient fan make it a solid fit for standard use cases.
Key specs explained
Cooler Height: 110mm
This low profile allows the cooler to fit inside most medium and large cases without blocking RAM slots. You can install taller memory modules without interference. If your case supports coolers under 120mm, this unit is a safe choice. It prioritizes compatibility over massive surface area, making it ideal for compact builds where space is limited.
Fan Size: 92mm
A 92mm fan is smaller than the standard 120mm or 140mm units. Smaller fans must spin faster to move the same amount of air. This design keeps the cooler compact but may generate more noise at high speeds. You should check your case fan mounts to ensure it accommodates 92mm fans or use adapters for optimal airflow integration.
Fan Speed: 2500 RPM ± 10%
This high maximum speed helps push air through the dense fin stack efficiently. You get strong cooling performance for its size, but higher RPMs often increase noise levels. The ± 10% variance accounts for manufacturing tolerances. Compare this to standard 120mm fans that run slower; this smaller fan compensates with speed to maintain thermal performance.
Heat Pipes: 5
Five heat pipes transfer heat from the copper base to the aluminum fins. This count provides a balanced thermal path for a cooler of this height. It helps distribute heat evenly across the dual-tower structure. More pipes generally improve heat dissipation, allowing the fan to work less hard. This setup supports moderate CPU loads within the 110mm constraint.
Build Quality and Design
The listing describes a dual-tower heatsink constructed with aluminum fins and a copper base. Five 6mm heat pipes use AGHP technology to manage heat against gravity in any orientation. The base features a finely engraved surface to improve contact with the CPU. A black metal top cover adds a symmetrical armor look. This design keeps the total height at just 110mm. You can install this cooler in cases that accept low-profile units without worrying about RAM clearance. The compact footprint leaves room for tall memory sticks.
The unit includes a 92mm PWM fan. It measures 92 by 92 by 25.6mm and runs up to 2500 RPM. The fan uses S-FDB bearings, which the listing claims reduce blade shaking and extend service life. Red rubber blocks and silicone corners are noted for balance and shock absorption. Airflow reaches 54 CFM at maximum speed. Noise stays at or below 23 dBA. You get a 4-pin connection for direct motherboard control. This setup allows you to adjust speed based on load.
Mounting hardware covers Intel LGA 1700, 1200, 115x, and 20xx series, plus AMD AM4 and AM5 sockets. Metal mounts are provided for better stability. The cooler weighs enough to stay secure without excessive pressure. The black finish matches modern cases. You do not need software to manage the fan. The hardware handles speed adjustments through your BIOS or motherboard settings. This straightforward build suits users who want reliable cooling without complex control interfaces.
Setup And Everyday Use
Installation relies on the included metal mounts for Intel and AMD platforms. You select the correct fastener for your specific socket. The cooler supports LGA 1700, LGA 1200, LGA 1150, LGA 1151, AM4, and AM5. The manufacturer provides corresponding mounting plates to ensure secure attachment. This hardware-based approach avoids software dependencies. You do not need an app or companion software to operate this unit. The fan connects via a standard 4-pin header. This allows your motherboard to control speed through PWM signals. The fan speed ranges up to 2500 RPM. It draws 12V power. The 92mm fan size requires a 92x92x25.6 mm mounting space. You must ensure your case has room for this width and depth. The 110mm height is the primary constraint. It fits most medium to large cases. Daily use involves the fan running at varying speeds. The S-FDB bearings aim to reduce blade shaking. This design targets lower noise levels, listed at 23dB(A) maximum. The red rubber block and silicone corners provide shock absorption. These features help maintain stability during operation. The cooler does not include RGB lighting or displays. It is a functional unit focused on airflow. The 54 CFM maximum airflow moves heat away from the CPU. You get consistent cooling performance without complex configuration. The dual-tower design helps dissipate heat efficiently. The AGHP heat pipes work in vertical or horizontal orientations. This flexibility simplifies installation in different case layouts. You simply install the cooler and connect the fan. The system handles the rest.
Before You Buy
You will need to verify your case supports 110mm coolers before purchasing. This unit fits most medium and large chassis, but you must check internal clearance. The 92mm fan is smaller than standard 120mm or 140mm options, so it requires a specific mounting hole pattern. Ensure your motherboard has a 4-pin CPU fan header for PWM control. You should also confirm your RAM height clears the 94mm width of the tower. Regular upkeep involves dusting the aluminum fins with compressed air to maintain airflow. This cooler suits users who prioritize low profile over maximum thermal headroom. It differs from larger dual-tower models by offering better RAM compatibility. If you need extreme cooling for high-wattage CPUs, look at larger units. For standard office or light gaming PCs, this compact design provides a practical balance of size and performance.
Check before you buy
- Verify your case supports coolers under 120mm in height.
- Confirm your motherboard has a 4-pin CPU fan header.
- Check that your RAM height clears the 94mm tower width.
- Ensure your case has mounting holes for 92mm fans.
The product at a glance
Thermalright Silver Soul 110 Black
Best for: Small form factor builds with height limits
- Cooler Height
- 110mm
- Heat Pipes
- 5
- Tower Design
- Dual-Tower
- Fan Size
- 92mm
- Fan Speed
- 2500 RPM ± 10%
- Socket Compatibility
- AM4, AM5, LGA 1700, LGA 1200, LGA 1150, LGA 1151
View on Amazon: Thermalright Silver Soul 110 Black Affiliate link
The Thermalright Silver Soul 110 is a compact dual-tower air cooler designed for small form factor builds. It stands 110mm tall and uses a 92mm PWM fan to deliver up to 54 CFM of airflow. The heatsink features five 6mm heat pipes with AGHP technology to manage heat efficiently in various orientations. It supports modern Intel and AMD sockets, including LGA 1700 and AM5. This cooler suits users needing low profile clearance without sacrificing basic cooling performance.
Pros
- Compact 110mm height fits most medium to large cases
- 5x6mm heat pipes with AGHP technique for better heat transfer
- 92mm PWM fan runs up to 2500 RPM with S-FDB bearings
- Wide socket support including LGA 1700 and AM5
Cons
- 92mm fan size provides lower maximum airflow compared to 120mm or 140mm fans
- Single fan configuration may limit cooling headroom under heavy loads
- No mention of RGB lighting or software control features
Good fit if
- You have a small ITX or mATX case with strict CPU cooler height limits
- You need a cooler that fits without obstructing RAM modules
- You are building a system with moderate TDP CPUs
Skip if
- You require maximum cooling performance for high-end overclocking
- You prefer the quieter operation of larger 120mm or 140mm fans
- You want customizable RGB lighting effects
Verdict: Thermalright Silver Soul 110 92mm Air Cooler is a practical solution for builders constrained by case height. It fits users who prioritize clearance over raw cooling power.
Specifications side by side
| Spec | Thermalright Silver Soul 110 Black |
|---|---|
| Cooler Height | 110mm |
| Heat Pipes | 5 |
| Tower Design | Dual-Tower |
| Fan Size | 92mm |
| Fan Speed | 2500 RPM ± 10% |
| Socket Compatibility | AM4, AM5, LGA 1700, LGA 1200, LGA 1150, LGA 1151 |
| Color | Black |
| Features | Fan |
| Dimensions | 3.7 × 3.7 × 4.33 inches |
Frequently asked questions
Is the Thermalright Silver Soul 110 compatible with AM5 sockets?
Yes, this cooler supports the AM5 socket. The manufacturer lists AM5 alongside AM4, LGA 1700, LGA 1200, LGA 1150, and LGA 1151 in the compatibility data. You can use the included metal mounts and fasteners to secure it to your motherboard. This ensures broad support for modern AMD and Intel platforms.
What are the physical dimensions of the Silver Soul 110?
The cooler measures 3.7 inches in width, 4.33 inches in height, and 3.7 inches in length. These compact dimensions make it suitable for small form factor builds. The low profile allows it to fit inside cases with strict height limits, provided you verify your chassis clearance before installation.
Does the Silver Soul 110 come with a fan?
Yes, the product listing includes a fan as a standard feature. The unit is described as an active air cooler, meaning it relies on this fan for heat dissipation. You do not need to purchase a separate fan to operate the cooler effectively. The fan is integrated into the overall cooling solution.
Who is the best user for this specific cooler?
This cooler is best for builders with small form factor cases and height restrictions. It prioritizes physical clearance over raw cooling power. If your case cannot accommodate larger towers, this 92mm unit offers a practical solution. It fits users who need a low-profile option without sacrificing active cooling performance.
Is the Silver Soul 110 available in a white color option?
The provided data lists the color as Black. There is no mention of a white variant or other color choices in the specifications. You should expect the unit to arrive in black unless the manufacturer updates the listing. This detail is fixed in the current product attributes.
Can this cooler fit in a case with 110mm height limits?
Yes, the cooler is designed to fit cases with 110mm height limits. Its height is listed as 4.33 inches, which converts to approximately 110mm. This allows it to clear most medium and large chassis. Always double-check your specific case specifications to ensure adequate clearance for the fan and heat pipes.