Thermalright Thermalrlght AXP120-X67 Low Profile Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This thermalright thermalrlght axp120 x67 low profile review focuses on a compact air cooler designed for small form factor builds. The unit stands at just 67mm in height, making it suitable for cases with limited clearance. It uses a 120mm PWM fan to move air through its aluminum fins. The cooler features six copper heat pipes that connect to a pure copper base. These specifications define its role as a space-saving solution that still aims for effective heat dissipation. You get a complete mounting kit for both Intel and AMD platforms. The design prioritizes low height without sacrificing the contact area needed for cooling.
What stands out
- 67mm total height for tight case compatibility
- Six 6mm pure copper heat pipes with AGHP technology
- 120mm PWM fan with 59CFM max airflow
- Supports Intel LGA 1700/1200/115x and AMD AM4/AM5
- Noise level capped at 26.1dB(A) at maximum speed
Who it fits
Good fit for
You should choose this cooler if you are building a mini-ITX or compact mATX system. The 67mm height allows it to fit inside cases that cannot accommodate standard towers. It suits users who need broad socket support, including the latest AMD AM5 and Intel LGA 1700. The included thermal paste and metal fasteners simplify the installation process. If your priority is fitting a 120mm fan into a low-profile chassis while maintaining decent cooling capacity, this unit addresses those needs directly.
Who should skip it
You should skip this option if you require maximum cooling performance for high-end processors. The 67mm height limits the surface area of the aluminum fins compared to full-sized towers. This design restricts airflow and heat dissipation potential. Users with powerful CPUs that generate significant heat may find this cooler insufficient. It is not intended for extreme overclocking or heavy sustained workloads. If you have ample case height, a larger tower cooler will likely offer better thermal results.
Verdict: This cooler offers a practical low-profile solution for compact builds with broad socket support. It balances size constraints with essential cooling components for moderate thermal loads.
Key specs explained for AXP120-X67
Cooler Height: 67mm
This low-profile height allows the cooler to fit in compact cases with limited vertical clearance. You can install it without worrying about RAM interference or case lid closure. It is ideal for mini-ITX builds where space is tight. Compare this height with standard air coolers that often exceed 150mm to understand the size difference for your chassis.
Fan Size: 120mm
A 120mm fan moves more air than smaller fans at lower speeds. This helps reduce noise while maintaining cooling efficiency. You benefit from quieter operation compared to smaller 80mm or 92mm fans. When shopping, check if your case supports 120mm fans to ensure compatibility with this cooler's airflow design.
Heat Pipes: 6
Six copper heat pipes transfer heat from the CPU base to the aluminum fins. This increases surface area for heat dissipation. You get better thermal performance than coolers with fewer pipes. Compare this count with other low-profile coolers to ensure adequate heat handling for your specific CPU power requirements.
Fan Speed: 1800 RPM ± 10%
This speed rating indicates the maximum rotational speed of the included fan. It balances airflow and noise levels for typical use. You can adjust this speed via motherboard PWM controls for quieter operation. Compare this RPM with other fans to gauge potential noise output and cooling capacity for your system.
Design and Build Quality
According to the listing, the Thermalright AXP120-X67 measures 123.5mm in length, 120mm in width, and 67mm in height. This compact footprint allows it to fit into small form factor cases where space is tight. The heat sink uses aluminum fins attached to a pure copper base. This combination helps transfer heat away from the CPU efficiently while keeping the overall weight manageable at 0.12kg for the fan alone. The cooler includes six 6mm pure copper heat pipes. These pipes use AGHP technology to solve inverse gravity effects, ensuring consistent performance whether the cooler is mounted vertically or horizontally. The base also features full electroplating reflow welding for better contact and durability.
The unit comes with a 120mm PWM fan, model TL-C12015, which measures 120x120x15mm. This fan operates at 1800 RPM with a maximum airflow of 59 CFM and noise levels up to 26.1 dB. The 4-pin power port allows you to control fan speed via your motherboard. The cooler supports Intel sockets like LGA 1700 and 1200, as well as AMD AM4 and AM5 platforms. Metal fasteners for different platforms are included to ensure secure installation. The design prioritizes low profile efficiency, making it a practical choice for compact builds without sacrificing cooling capacity. You get a straightforward, no-frills assembly that fits standard mounting holes.
Installation and Daily Operation
Setting up the Thermalright AXP120-X67 involves matching the included mounting hardware to your specific CPU socket. The listing confirms support for Intel sockets 1150, 1151, 1155, 1156, 1200, 1700, 17XX, and 2066, as well as AMD AM4 and AM5 platforms. You must select the correct metal fasteners or mounting plates provided in the box to secure the cooler properly. This ensures the unit sits flat against the processor for efficient heat transfer. The 4-pin PWM fan connects directly to your motherboard, allowing you to control speed via software. The fan operates at 1800 RPM with a tolerance of plus or minus ten percent. This speed generates up to 59 CFM of airflow while keeping noise at or below 26.1 dB(A). In daily use, the six 6mm pure copper heat pipes utilize AGHP technology to manage heat effectively. This technique addresses inverse gravity effects, meaning orientation does not significantly impact performance whether the cooler is vertical or horizontal. The sintered heat pipes and pure copper base work together to draw heat away from the CPU. The included thermal paste aids this process by improving contact between the base and the processor. You do not need additional sensors or displays for operation. The system relies on standard PWM signals for fan control. This straightforward setup makes it suitable for users who prefer a direct, hardware-focused cooling solution without complex configuration steps.
Before You Buy This Cooler
Before you buy the Thermalright AXP120-X67, check your case clearance carefully. The 67mm height is tight for some mini-ITX chassis. Verify your RAM sticks do not block the 120mm fan. This cooler supports Intel LGA 1700 and AMD AM5, but older sockets like 1150 also work. You must ensure your motherboard has a 4-pin PWM header for the included TL-C12015 fan. The listing notes metal fasteners for both platforms are included, so no extra parts are needed. Keep the aluminum fins clean from dust to maintain the 59CFM airflow. This unit sits alongside other low-profile options by offering six heat pipes for better heat transfer than basic models. It suits users who need quiet operation under 26.1dB. If you prioritize extreme cooling in a tiny space, this spec-focused choice fits well. Just confirm your case lid closes fully with the fan attached.
Check before you buy
- Check your case supports 67mm cooler height.
- Ensure RAM does not block the 120mm fan.
- Verify motherboard has a 4-pin PWM header.
- Confirm socket compatibility for your specific CPU.
The product at a glance
Thermalright AXP120-X67 Low Profile Cooler
Best for: Quiet cooling in small form factor cases
- Cooler Height
- 67mm
- Heat Pipes
- 6
- Tower Design
- Low-Profile
- Fan Size
- 120mm
- Fan Speed
- 1800 RPM ± 10%
- Socket Compatibility
- AM4, AM5, LGA 1700, LGA 1200, LGA 1150, LGA 1151
View on Amazon: Thermalright AXP120-X67 Low Profile Cooler Affiliate link
This low-profile air cooler stands at 67mm tall, making it suitable for compact cases. It uses six 6mm copper heat pipes with AGHP technology to manage heat in any orientation. The included 120mm PWM fan moves up to 59 CFM of air while staying under 26.1 dB. It supports major Intel and AMD sockets, offering a quiet cooling solution for small form factor builds.
Pros
- Compact 67mm height fits tight cases
- Six pure copper heat pipes with AGHP
- Quiet 120mm PWM fan under 26.1 dB
- Broad socket support including AM5 and LGA 1700
Cons
- Aluminum fins may offer less thermal mass than all-copper designs
- Single fan limits peak airflow compared to dual-fan setups
- No mention of RGB lighting or software control
Good fit if
- You need a cooler under 70mm for a small case
- You use an AM5 or LGA 1700 processor
- You prioritize quiet operation over maximum cooling headroom
Skip if
- You require a dual-tower cooler for high-end chips
- You need RGB lighting effects
- You have a case taller than 70mm and want maximum performance
Verdict: Thermalright AXP120-X67 Low Profile Cooler fits users who need a quiet, compact solution for modern sockets. It balances low height with solid heat pipe count for small builds.
Specifications side by side
| Spec | Thermalright AXP120-X67 Low Profile Cooler |
|---|---|
| Cooler Height | 67mm |
| Heat Pipes | 6 |
| Tower Design | Low-Profile |
| Fan Size | 120mm |
| Fan Speed | 1800 RPM ± 10% |
| Socket Compatibility | AM4, AM5, LGA 1700, LGA 1200, LGA 1150, LGA 1151 |
| Features | Fan |
| Dimensions | 4.86 × 4.72 × 2.64 inches |
| Color | AXP120 X67 |
| Model | AXP120 X67 |
Frequently asked questions
Is the Thermalright AXP120-X67 compatible with AM5 sockets?
Yes, this cooler supports the AM5 socket. It also works with AM4 and several Intel platforms including LGA 1700, LGA 1200, LGA 1150, and LGA 1151. You can install it on modern AMD or Intel CPUs without checking for missing bracket support.
How many heat pipes does the AXP120-X67 have?
The unit features six heat pipes. This count helps move heat away from the CPU base efficiently. More pipes generally improve thermal transfer in low-profile designs, allowing the cooler to handle modern processors within its compact physical constraints.
What are the exact dimensions of this cooler?
The cooler measures 4.72 inches in width, 2.64 inches in height, and 4.86 inches in length. These dimensions define its low-profile form factor. You can verify if it fits your case by comparing these measurements against your available vertical clearance.
Does this cooler include a fan?
Yes, the product listing indicates that a fan is included. The fan is essential for moving air through the aluminum fins. Without it, the heat pipes cannot dissipate heat effectively into the surrounding case environment.
Is this cooler suitable for small form factor builds?
It is designed for quiet cooling in small form factor cases. Its compact height and width allow it to fit into tight spaces. This makes it a practical choice for mini-ITX builds where standard air coolers are too large.
Does the AXP120-X67 support LGA 1700?
Yes, the specifications list LGA 1700 as a compatible socket. This covers recent Intel Core processors. You can use the included mounting hardware to secure the cooler to your motherboard without needing additional adapters for this specific platform.