Thermalright AXP90-X53 Full Copper Low-Profile Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The thermalright thermalright tr axp90 x53 full low profile CPU cooler is designed for compact builds. It features a 53mm height and uses four 6mm heat pipes. This cooler pairs with a 92mm TL-9015R PWM fan. The fan runs at 2700RPM for quiet operation. Pure copper construction helps with heat dissipation. The AGHP technology improves heat transfer efficiency. It fits Intel LGA1700 and AMD AM5 sockets. You get good cooling in small cases. This cooler avoids memory conflicts. It is ideal for ITX systems.
What stands out
- 53mm total height fits tight cases
- Pure copper base and fins for oxidation resistance
- 4x6mm heat pipes with AGHP technology
- 92mm TL-9015R fan with 42.58CFM airflow
Who it fits
Good fit for
You should choose this cooler if you build in an ITX case with limited CPU cooler clearance. The 53mm height allows it to fit below many low-profile RAM sticks. It suits users who need quiet operation, as the fan noise is rated at 22.4db. It works well for Intel LGA1700 and AMD AM5 platforms in small form factors. You will appreciate the pure copper construction for durability and heat transfer in confined spaces.
Who should skip it
Skip this option if you need a high-performance cooler for a large ATX tower. The 53mm height and 92mm fan limit cooling capacity for high-TDP CPUs. You should look elsewhere if you require a 120mm or 140mm fan for higher airflow. This cooler is not suitable for setups where you need extensive fan curve customization beyond basic PWM. It lacks the surface area for heavy gaming or rendering loads.
Verdict: This cooler is a solid choice for ITX builds with strict height limits. It balances low profile design with efficient heat transfer.
Key specs explained for this cooler
Cooler Height: 53mm
This low profile allows the unit to fit inside small ITX cases with limited clearance. You can install it without worrying about RAM height interference. Most standard towers exceed 150mm. This compact size makes it ideal for HTPC builds or mini-ITX systems where space is tight. Check your case manual for max cooler height before buying.
Fan Size: 92mm
A 92mm fan fits the narrow dimensions of the heatsink. Smaller fans spin faster to move air through tight fins. This creates more noise than larger fans. You get precise airflow control for low-profile designs. Larger 120mm or 140mm fans are quieter but will not fit here. This size is a trade-off for compactness.
Heat Pipes: 4
Four heat pipes transfer heat from the CPU base to the fins. This cooler uses 6mm diameter pipes for efficient conduction. More pipes generally help spread heat across the fin stack. This setup supports moderate TDP CPUs. High-end gaming rigs might need more pipes. This count is standard for efficient low-profile air cooling solutions.
Socket Compatibility: LGA1700, AM4, AM5
This cooler supports modern Intel and AMD platforms. You can use it on the latest LGA1700 and AM5 sockets. It also works with older LGA115x and AM4 boards. This broad support simplifies upgrades. You do not need a new cooler for every new CPU generation. Verify your specific motherboard model for mounting bracket inclusion.
Design and build details
The heatsink base uses pure copper with a Seiko micro-carved finish. The listing states this process reduces wind damage and improves oxidation resistance. Four 6mm heat pipes connect to the base. They feature fourth-generation AGHP technology to prevent heat loss in vertical or horizontal positions. Two soldered heat pipe fins double the transfer efficiency. The entire assembly stands 53mm tall. This low profile allows installation in tight ITX cases without blocking RAM slots. The cooler measures 94.5 by 95 by 53mm. You can mount it on Intel LGA1700, 1150, 1151, 1155, 1156, 1200, or AMD AM4 and AM5 sockets. Metal fasteners are included for each platform. If your motherboard has a fixed backplate, you may need to reverse the bracket or use long screws. The unit pairs with a 92mm TL-9015R PWM fan. It moves 42.58 CFM of air at 2700 RPM. Noise stays at 22.4 dBA. This setup suits small form factor PCs where space is limited. The pure copper construction helps maintain stable temperatures under load. You do not need to worry about memory clearance when installing this cooler. The design prioritizes height reduction over tower size.
Setup and everyday use notes
Installation begins with matching the correct mounting hardware to your motherboard socket. The listing includes specific metal fasteners for Intel LGA1700, LGA1200, LGA1150, LGA1151, and AMD AM4 or AM5 platforms. You must follow the manual or provided video for the exact sequence. A common setup challenge involves the backplate. If the AXP90-X backplate conflicts with components on the rear of your motherboard, you need to use the included long screws and install the backplane in reverse. For AM4 or AM5 boards with a non-removable bottom metal backplate, you can remove the front plastic bracket and screws. Then, use the attached long screws to install through the metal backplate directly. Once mounted, the 53mm height ensures it sits low enough to avoid interference with tall RAM sticks. This makes it suitable for small ITX cases where space is tight. Daily operation relies on the 92mm TL-9015R PWM fan. The fan speed adjusts automatically via the 4-pin PWM connection. It can reach 2700RPM for maximum cooling. At this speed, the air volume hits 42.58CFM and noise reaches 22.4dB. The pure copper construction and AGHP heat pipes help move heat away from the CPU efficiently. The included thermal paste is also provided to aid in initial heat transfer. You do not need to buy separate paste for basic setup. The system type is listed as ITX, confirming its focus on compact builds.
Check clearance and socket fit
Before you buy this Thermalright AXP90-X53, verify your case clearance carefully. The 53mm height is tight. You must ensure the included 92mm TL-9015R fan fits without blocking RAM. Check your motherboard socket support. It lists LGA1700, LGA1200, LGA1150, LGA1151, AM4, and AM5. Some older LGA1155 or LGA1156 sockets appear in features but not key specs, so confirm compatibility. Installation may require reversing the backplane if it conflicts with rear components. Use the long screws provided for AM4/AM5 non-removable backplates. This cooler suits low-TDP CPUs in ITX builds. It does not replace high-end air coolers for heavy workloads. Keep the fins clean. Dust accumulation reduces the 42.58 CFM airflow over time. You need to clean it periodically. This option fills a niche for small form factor PCs where space is the primary constraint, unlike larger towers that offer more cooling headroom.
Check before you buy
- Measure case height for 53mm clearance plus fan thickness
- Confirm motherboard socket matches listed Intel or AMD options
- Check RAM height interference with the 92mm fan
- Verify backplate clearance on the rear of the motherboard
The product at a glance
Thermalright AXP90-X53 Full Copper Low-Profile Cooler
Best for: ITX builds with limited CPU cooler height
- Socket Compatibility
- LGA1700/1150/1151/1200, AM4, AM5
- Cooler Height
- 53mm
- Heat Pipes
- 4
- Tower Design
- Low-Profile
- Fan Size
- 92mm
- Fan Speed
- 2700RPM±10%
View on Amazon: Thermalright AXP90-X53 Full Copper Low-Profile Cooler Affiliate link
The Thermalright AXP90-X53 is a 53mm low-profile CPU cooler designed for ITX builds. It uses four 6mm heat pipes with AGHP technology to manage heat in vertical or horizontal orientations. The pure copper heatsink pairs with a 92mm PWM fan that reaches 2700 RPM. This setup delivers 42.58 CFM of airflow while keeping noise at 22.4 dB. It supports Intel LGA1700 and AMD AM5 sockets, fitting compact cases without memory interference.
Pros
- 53mm total height fits small form factor cases
- Pure copper heatsink with AGHP heat pipe technology
- 92mm PWM fan provides 42.58 CFM airflow
- Supports Intel LGA1700 and AMD AM5 sockets
Cons
- Low-profile design limits cooling capacity for high-TDP CPUs
- 92mm fan size restricts airflow compared to larger 120mm fans
- Pure copper construction adds weight and bulk to the heatsink
Good fit if
- You need a cooler under 55mm for an ITX case
- You use an Intel LGA1700 or AMD AM5 processor
- You prioritize quiet operation with low noise levels
Skip if
- You require high-end cooling for overclocked CPUs
- You have limited RAM clearance with tall low-profile coolers
- You prefer aluminum heatsinks for lighter weight
Verdict: Thermalright AXP90-X53 Low-Profile CPU Cooler is a solid choice for ITX builders needing reliable cooling in tight spaces. It fits users who value compact size and quiet operation over maximum thermal performance.
Specifications side by side
| Spec | Thermalright AXP90-X53 Full Copper Low-Profile Cooler |
|---|---|
| Socket Compatibility | LGA1700/1150/1151/1200, AM4, AM5 |
| Cooler Height | 53mm |
| Heat Pipes | 4 |
| Tower Design | Low-Profile |
| Fan Size | 92mm |
| Fan Speed | 2700RPM±10% |
| System Type | ITX |
| Features | Fan |
Frequently asked questions
Does the Thermalright AXP90-X53 support modern AMD sockets?
Yes, it supports AMD AM4 and AM5 platforms. You can install it on these sockets using the included metal fasteners. This ensures compatibility with current Ryzen processors. The cooler is designed to fit securely on these specific motherboards for reliable performance in compact builds.
Is this cooler suitable for Intel LGA 1700?
Yes, it supports Intel LGA 1700. The package includes specific mounting hardware for this socket. You can mount it on 12th, 13th, and 14th Gen Intel Core processors. This makes it a viable option for users building small form factor PCs with modern Intel CPUs.
What fan comes with the Thermalright AXP90-X53?
It pairs with a 92mm TL-9015R PWM fan. This fan runs at 2700 RPM for quiet operation. The PWM feature allows for speed control based on temperature. You get a compact fan that fits the low-profile design while maintaining adequate airflow for ITX systems.
How many heat pipes does the AXP90-X53 have?
It features four 6mm heat pipes. These pipes use fourth-generation AGHP technology to prevent heat loss. They connect directly to the pure copper base. This configuration helps transfer heat efficiently from the CPU to the fins in a tight space.
Can I install this cooler in a small ITX case?
Yes, it is designed for ITX builds with limited height. The 53mm height allows it to fit inside small cases. You must check that the 92mm fan does not block RAM sticks. It is a solid choice for builders who value compact size and quiet operation.
What is the base material of the heatsink?
The base uses pure copper. It features a Seiko micro-carved finish to improve oxidation resistance. This material helps conduct heat away from the processor quickly. The finish also reduces wind damage. You get a durable base that maintains contact with the CPU for effective cooling.
Does it support older Intel sockets like LGA 1151?
Yes, it supports LGA 1151, LGA 1150, and LGA 1200. You can use the included hardware for these older platforms. This makes it versatile for upgrading older systems or building budget PCs. Ensure your motherboard socket matches one of the supported list before purchasing.