Thermalright Dual-Fan 7 Heat Pipe CPU Cooler Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This thermalright dual fan 7 heat pipe CPU cooler review focuses on the PS120SE model from Thermalright. It features seven 6mm heat pipes using AGHP 4.0 technology. The cooler is paired with dual 120mm TL-C12B V2 PWM fans. These fans spin at 1500rpm and move up to 66.17 CFM of air. The unit stands 154mm tall and weighs 0.9kg. It supports a wide range of Intel and AMD sockets. You get a robust aluminum and copper construction designed for efficient heat transfer. This setup aims to handle TDP ratings from 105W to 280W.
What stands out
- Seven 6mm heat pipes with AGHP 4.0 technology
- Dual 120mm TL-C12B V2 PWM fans at 1500rpm
- 154mm height fits most standard chassis
- Supports Intel LGA1700/1200/115x and AMD AM4/AM5
- S-FDB bearings for long service life
Who it fits
Good fit for
You should choose this cooler if you need reliable cooling for mid-to-high performance CPUs. The 154mm height allows it to fit inside most mid-tower cases. The dual fan design helps dissipate heat from the seven heat pipes efficiently. It works well with Intel LGA1700 and AMD AM5 platforms. If you prefer a no-RGB, practical solution, this model fits your needs. The S-FDB bearings promise durability for long-term use without frequent maintenance.
Who should skip it
You might want to look elsewhere if your case has strict height limits under 154mm. The cooler is bulky, measuring 125x135x154mm. If you need RGB lighting for aesthetic builds, this base model lacks it. You would need to check the ARGB variation for that feature. Also, if your CPU exceeds 280W TDP, this air cooler may struggle. High-end enthusiasts might prefer liquid cooling for extreme thermal loads.
Verdict: The Thermalright PS120SE offers solid cooling performance through its seven heat pipes and dual fans. It is a practical choice for users needing compatibility with modern sockets and standard case sizes.
Key specs explained for this cooler
Heat Pipes: 7
This cooler uses seven heat pipes to move heat away from the CPU. More pipes generally spread heat across a larger surface area. This helps the aluminum fins cool down faster. It is a strong configuration for air cooling. You get better thermal transfer compared to models with fewer pipes. This setup supports higher TDP ratings effectively.
Fan Speed: 1500rpm±10%
The fans rotate at 1500 revolutions per minute. This speed balances airflow and noise. It is not the fastest speed available, so it may run quietly. You can expect moderate air movement through the fins. This speed is suitable for standard desktop use. It avoids the loud noise of high-RPM fans while still providing adequate cooling for most processors.
TDP Rating: 105W to 280W
The cooler is rated for processors between 105W and 280W. This wide range covers many modern CPUs. It suggests the unit can handle high-end chips. You do not need a liquid cooler for many powerful processors. Check your CPU's power draw against this range. It ensures the cooler can dissipate the heat generated by demanding workloads without overheating.
Cooler Height: 154mm
The cooler stands 154mm tall. This is a standard height for many mid-tower cases. You must check your case specifications before buying. If your case supports heights over 154mm, it will fit. Taller cases offer more clearance. This dimension is critical for ensuring the cooler does not block RAM sticks or side panels.
Design and build quality
The cooler uses an all-aluminum fin stack with a pure copper base. The listing notes an anodized black frosted top and finely carved base technology. This construction maximizes the heat dissipation area. The seven 6mm heat pipes use AGHP 4.0 technology. This design aims to counteract the inverse gravity effect in vertical or horizontal orientations. According to the listing, this allows a TDP rating of 105W to 280W. The bearings are specified as S-FDB type for long service life.
Dimensions are 125mm by 135mm by 154mm. The total weight is 0.9kg. The 154mm height is compatible with a wide range of chassis models. You should check your case clearance before installation. The base avoids memory interference, which is useful for tall RAM modules. The material is industrial strength PBT plus PC for safety insulation. This suggests a focus on durability and stable thermal performance.
The dual 120mm fans are standard size industrial grade PWM units. They connect via a 4-pin port at 12V. The fan speed is 1500rpm with a ten percent variance. Airflow is listed at 66.17 CFM. Noise levels are capped at 25.6 dB. This combination of specs points to a practical, no-nonsense design. It suits users who need reliable cooling without complex features. The build prioritizes heat transfer efficiency and broad socket support.
Setup And Everyday Use
Installing this cooler requires matching the mounting hardware to your specific CPU socket. The listing confirms support for Intel LGA 1700, 1150, 1151, 1155, 1156, and 1200. It also covers AMD AM4 and AM5 platforms. You must use the corresponding fasteners or plates provided for your chosen socket type. The installation process follows the included tutorial or instructions. Physical clearance is a primary consideration during setup. The cooler stands 154mm (6.06 inches) tall. You need to verify that your case can accommodate this height before proceeding. The dual 120mm fans add width and depth to the footprint. You should check side panel clearance and RAM height compatibility. Once mounted, the cooler relies on PWM control for daily operation. The TL-C12B V2 fans connect via a standard 4-pin header. This allows the motherboard to adjust speed based on thermal load. The fans operate at 1500rpm with a maximum airflow of 66.17 CFM. Noise levels remain at or below 25.6 dBA at maximum speed. The S-FDB bearings are rated for 20,000 hours of service. This suggests stable performance over time without manual intervention. The AGHP 4.0 technology manages heat distribution regardless of orientation. This helps maintain consistent cooling whether the PC sits horizontally or vertically. The cooler handles TDP ratings from 105W to 280W. You can pair it with various processors within this thermal range. The build uses industrial-grade PBT and PC materials for durability. UL Class A insulation ensures safe electrical operation during everyday use.
Before You Buy This Cooler
Before you buy this Thermalright PS120SE, verify your case clearance. The cooler stands 154mm tall. You must ensure your chassis has sufficient height to accommodate it. Check RAM clearance as well, since the dual 120mm fans sit close to memory modules. The listing confirms support for Intel LGA 1700, 1150, 1151, 1200, and AMD AM4 and AM5 sockets. You will need to use the correct mounting hardware for your specific platform. This model uses AGHP 4.0 technology with seven 6mm heat pipes. It pairs with TL-C12B V2 PWM fans. These fans operate at 1500rpm. They are designed for quiet performance. This cooler sits alongside other options in our guide on CPU Air Coolers & Thermal Paste. It offers a high TDP rating of 280W. You should pair it with quality thermal paste for best results. Regular dust cleaning will maintain its efficiency. The S-FDB bearings suggest long service life. Ensure your motherboard has a 4-pin CPU fan header to control the PWM fans. This setup provides reliable cooling for modern processors.
Check before you buy
- Check your case height supports 154mm clearance.
- Verify RAM fits between the dual 120mm fans.
- Confirm your socket matches LGA 1700 or AM5.
- Ensure motherboard has a 4-pin CPU fan header.
The product at a glance
Thermalright Dual-Fan 7 Heat Pipe CPU Cooler
Best for: High TDP CPUs on AM5 and LGA 1700
- Socket Compatibility
- 1700, 1150, 1151, 1200, 1851, AM4, AM5
- Cooler Height
- 154mm
- Heat Pipes
- 7
- Fan Size
- 120mm
- TDP Rating
- 105W to 280W
- Fan Speed
- 1500rpm±10%
View on Amazon: Thermalright Dual-Fan 7 Heat Pipe CPU Cooler Affiliate link
The Thermalright PS120SE is a dual-fan air cooler with seven heat pipes. It uses AGHP 4.0 technology to handle TDP ratings from 105W to 280W. The unit includes two 120mm fans that run at 1500 RPM with a maximum airflow of 66.17 CFM. It stands 154mm tall and supports modern Intel and AMD sockets. This cooler suits users who need broad socket compatibility and strong cooling performance in a standard dual-fan form factor.
Pros
- Seven 6mm heat pipes with AGHP 4.0 technology
- Dual 120mm fans with 66.17 CFM max airflow
- Supports Intel LGA 1700/115x and AMD AM4/AM5
- S-FDB bearings for long service life
- TDP rating up to 280W
Cons
- 154mm height may not fit smaller cases
- No ARGB lighting included in this specific model
- Only 66.17 CFM airflow is modest for dual fans
Good fit if
- You need support for the latest AM5 or LGA 1700 sockets
- Your case can accommodate a 154mm tall cooler
- You want a high heat pipe count for efficient cooling
Skip if
- You have a small form factor case with low clearance
- You prefer single-fan designs for minimal noise
- You require RGB lighting effects
Verdict: Thermalright PS120SE Dual Fan Cooler delivers strong thermal performance through its seven heat pipes and dual 120mm fans. It is the right choice for builders needing broad socket support and high TDP handling in a standard dual-fan cooler.
Specifications side by side
| Spec | Thermalright Dual-Fan 7 Heat Pipe CPU Cooler |
|---|---|
| Socket Compatibility | 1700, 1150, 1151, 1200, 1851, AM4, AM5 |
| Cooler Height | 154mm |
| Heat Pipes | 7 |
| Fan Size | 120mm |
| TDP Rating | 105W to 280W |
| Fan Speed | 1500rpm±10% |
| Features | Fan |
| Dimensions | 5.31 × 4.92 × 6.06 inches |
| Weight | 14.4 ounces |
| Size | 7 Heat Pipe |
| Color | PS120 SE |
| Model | PS120SE |
Frequently asked questions
Does the Thermalright PS120SE fit AM5 motherboards?
Yes, this cooler supports the AM5 socket. The listing confirms compatibility with AM4, AM5, LGA 1851, LGA 1700, LGA 1200, LGA 1150, and LGA 1151. You can use it on modern AMD Ryzen platforms and current Intel processors without issue.
How tall is the Thermalright PS120SE cooler?
The cooler stands 6.06 inches tall. This height is approximately 154mm. You must check your case specifications to ensure it has enough vertical clearance to accommodate the dual-fan assembly without interfering with side panels or RAM modules.
What fan speed does the PS120SE use?
The included dual 120mm TL-C12B V2 PWM fans spin at 1500rpm. This speed allows them to move air efficiently across the fin stack. The PWM feature lets your motherboard adjust the speed based on thermal load.
Is the Thermalright PS120SE good for high TDP CPUs?
Yes, it is rated for high TDP CPUs on AM5 and LGA 1700. The seven heat pipes and dual fans provide strong thermal performance. This makes it a suitable choice for builders needing broad socket support and high heat dissipation.
What material is the base of this cooler?
The cooler features a pure copper base. It is paired with an all-aluminum fin stack. This combination helps maximize heat dissipation area. The listing also notes finely carved base technology to improve contact with the CPU surface.
How much does the Thermalright PS120SE weigh?
The unit weighs 14.4 ounces. This weight includes the dual fans and the heat sink structure. You should ensure your motherboard mounting points can support this mass securely. Proper installation is key to maintaining stable temperatures.
Does this cooler use AGHP heat pipes?
Yes, it uses seven 6mm heat pipes with AGHP 4.0 technology. This design helps move heat away from the CPU base more effectively. The pipes spread the thermal load across a larger surface area of the aluminum fins.