Best Thermalright CPU Coolers: 15 Models Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the right thermalright CPU cooler depends on your case clearance and motherboard layout. Thermalright offers low-profile heatsinks ranging from 36mm to 67mm, single-tower designs, and dual-tower coolers with optional ARGB lighting.
The Thermalright 53mm Low Profile ITX CPU Cooler leads the list by delivering copper heat-pipe construction within a tight 53mm height for compact mini-ITX and small-form-factor PC builds. This guide compares 15 models strictly using their published specifications. You can check socket compatibility, heat-pipe counts, and total dimensions to find the right fit for your desktop.
Quick picks
Our 15 picks
Thermalright 53mm Low Profile ITX CPU Cooler
Best for: compact mini-ITX and small-form-factor PC builds
- Cooler Height
- 53mm
- Heat Pipes
- 4
- Tower Design
- Low Profile
- Fan Size
- 92mm
- Fan Speed
- 2700RPM ± 10%
- System Type
- ITX
View on Amazon: Thermalright 53mm Low Profile ITX CPU Cooler (paid link)
This Thermalright cooler is a compact down-draft air heatsink built for small-form-factor systems. At 53mm tall, it fits tight mini-ITX cases without blocking memory slots. It pairs four 6mm copper heat pipes and an aluminum fin stack with a 92mm PWM fan running up to 2700 RPM. If you assemble an ultra-compact desktop, it provides direct socket airflow while maintaining wide Intel and AMD platform compatibility.
Pros
- 53mm total height fits compact ITX cases and clears memory
- Four 6mm copper heat pipes with AGHP technology
- 92mm PWM fan delivers up to 42.58 CFM at 22.4 dB(A)
- Supports Intel LGA1700/1851 and AMD AM4/AM5 sockets
Cons
- Requires original motherboard backplate for AMD installation
- Smaller 92mm fan moves less air than full-size 120mm designs
Good fit if
- You build inside a compact mini-ITX or HTPC chassis with tight clearance.
- You need a low-profile cooler that avoids overlapping tall RAM modules.
- You use modern desktop sockets across recent Intel or AMD platforms.
Skip if
- You have a full-size case that accommodates taller 120mm tower coolers.
- You no longer have the stock motherboard backplate for an AMD build.
Verdict: Thermalright 53mm Low Profile ITX CPU Cooler delivers capable heat dissipation within a tight 53mm vertical clearance. It provides solid copper heat-pipe construction for space-constrained small-form-factor systems.
Thermalright Peerless Assassin 120 Dual Fan Cooler
Best for: Standard PC cases needing dual-tower air cooling
- Cooler Height
- 157mm
- Heat Pipes
- 6
- Tower Design
- Double tower
- Fan Size
- 120mm
- Fan Speed
- 1550rpm±10%
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1700, LGA 1200, LGA 1150, LGA 1151
View on Amazon: Thermalright Peerless Assassin 120 Dual Fan Cooler (paid link)
The Thermalright Peerless Assassin 120 is a dual-tower air cooler equipped with six 6mm heat pipes and two 120mm TL-C12 PWM fans. It stands 157mm tall and delivers up to 66.17 CFM of airflow at noise levels up to 25.6 dB(A). This heatsink suits you if you need dual-tower cooling performance for modern Intel or AMD desktop processors while maintaining a non-illuminated hardware setup.
Pros
- Dual TL-C12 120mm PWM fans providing up to 66.17 CFM airflow
- Six 6mm pure copper heat pipes with AGHP anti-gravity technology
- Copper base with full electroplating reflow welding
- Broad socket support covering Intel LGA1700/1851 and AMD AM4/AM5
Cons
- Overall height of 157mm requires a mid-tower or full-tower chassis
- No integrated RGB or ARGB lighting included on the fans
Good fit if
- You have a PC case with at least 157mm of CPU cooler height clearance.
- You want a dual-tower heatsink paired with two 120mm PWM fans.
- You use a compatible Intel LGA or AMD AM4/AM5 socket.
Skip if
- You need a compact low-profile cooler for a small-form-factor or ITX case.
- You want integrated RGB lighting on your cooling fans.
Verdict: Thermalright Peerless Assassin 120 Dual Tower Cooler provides substantial dual-tower airflow via two 120mm fans and six copper heat pipes. It gives you capable standard-height cooling without visual illumination.
Thermalright Peerless Assassin 120 White Dual Tower
Best for: all-white desktop builds needing dual-tower cooling
- Socket Compatibility
- AM4, AM5, LGA115x/1200/1700/1851/2011
- Cooler Height
- 157mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120mm
- Fan Speed
- 1550 RPM
View on Amazon: Thermalright Peerless Assassin 120 White Dual Tower (paid link)
This dual-tower white CPU air cooler uses six 6mm heat pipes and a copper base to handle heat dissipation. It comes with two 120mm PWM fans that reach up to 1,550 RPM, pushing 66.17 CFM of airflow at 25.6 dB(A) maximum noise. At 157mm tall, it fits standard mid-tower cases and supports modern AMD AM4, AM5, and Intel LGA 1700 and 1851 sockets. It suits you if you need balanced air cooling for a white build.
Pros
- Six 6mm sintered copper heat pipes with AGHP technology
- Dual 120mm PWM fans producing up to 66.17 CFM airflow
- Maximum rated fan noise stays at or below 25.6 dB(A)
- Broad socket support covering AMD AM4/AM5 and Intel LGA 1700/1851
Cons
- 157mm total height requires adequate PC case clearance
- No integrated RGB or ARGB lighting listed
Good fit if
- You want an all-white dual-tower cooler with dual 120mm PWM fans.
- You need out-of-the-box mounting support for Intel LGA 1700, LGA 1851, or AMD AM5.
Skip if
- You have a compact chassis with less than 157mm of cooler height clearance.
- You want built-in ARGB lighting on your cooler fans or heatsink.
Verdict: Thermalright Peerless Assassin 120 White delivers strong dual-tower cooling and quiet 25.6 dB(A) operation across modern AMD and Intel platforms. It is a solid choice for full-sized white desktop builds.
Thermalright 47mm Low-Profile CPU Cooler
Best for: compact ITX builds needing under-50mm clearance
- Socket Compatibility
- AM4, AM5, LGA115x/1200/1700/1851
- Cooler Height
- 47mm
- Heat Pipes
- 4
- Tower Design
- Low-Profile
- Fan Size
- 92mm
- System Type
- ITX
View on Amazon: Thermalright 47mm Low-Profile CPU Cooler (paid link)
This Thermalright cooler is a compact low-profile air cooler designed for space-constrained ITX systems. At 47mm in total height, it pairs four 6mm heatpipes with a 92mm slim PWM fan rated at or below 22.4 dBA. It mounts to Intel LGA 115X, 1200, and 1851 sockets as well as AMD AM4 and AM5. You get reliable clearance for tight small-form-factor builds where full-sized tower coolers cannot fit.
Pros
- Low 47mm overall height for compact ITX enclosures
- Four 6mm heatpipes with secondary reflow soldering
- Quiet 92mm slim PWM fan rated at 22.4 dBA or lower
- Compatible with AMD AM4/AM5 and Intel LGA 115X, 1200, and 1851
Cons
- Uses a smaller 92mm fan rather than a standard 120mm fan
- Includes four heatpipes instead of the six found on larger models
Good fit if
- You need a low-profile cooler with a total height under 50mm.
- You are assembling an ITX build on an AM4, AM5, or Intel LGA 115X/1200/1851 socket.
- You want a fan that operates at 22.4 dBA or less.
Skip if
- You have clearance for a larger 120mm tower cooler.
- You need ARGB lighting included with your cooling hardware.
Verdict: Thermalright Low-Profile 47mm ITX CPU Cooler delivers a 47mm total profile, four 6mm heatpipes, and low-noise operation for small-form-factor setups. It gives you dependable clearance when your case lacks space for a standard tower.
Thermalright AXP90 36mm Low-Profile Cooler
Best for: ultra-compact Mini-ITX PC builds
- Socket Compatibility
- AM4, AM5, LGA1150/1151/1200/1700/1851
- Cooler Height
- 36mm
- Heat Pipes
- 4
- Tower Design
- Low-Profile
- System Type
- ITX
- Features
- Fan
View on Amazon: Thermalright AXP90 36mm Low-Profile Cooler (paid link)
This is an ultra-compact air cooler built specifically for tight small-form-factor builds. At a total height of 36mm, it fits into cramped ITX cases where standard coolers cannot go. It features four 6mm AGHP heatpipes, a slim TL-9015 PWM fan, and an all-metal mounting platform with a backplate. You will find it suits your build if you run AMD AM4/AM5 or Intel LGA 115X/1200/1851 processors inside restricted enclosures.
Pros
- Total height of 36mm fits ultra-compact ITX cases
- Four 6mm AGHP heatpipes with nickel plating
- Quiet slim TL-9015 PWM fan rated at 22.4 dBA maximum noise
- All-metal platform with included backplate fastener
Cons
- No support listed for Intel LGA 1700 sockets
- Slim fan and compact heatsink offer less surface area than full-size tower coolers
Good fit if
- You need an ITX cooler with a maximum vertical clearance of 36mm.
- You use compatible AMD AM4/AM5 or Intel LGA 115X/1200/1851 motherboards.
- You want low noise output rated at or below 22.4 dBA.
Skip if
- You require out-of-the-box support for an Intel LGA 1700 motherboard.
- You have clearance for a taller dual-tower cooler with standard 120mm fans.
Verdict: Thermalright 36mm Low Profile ITX Cooler delivers a compact 36mm profile with four 6mm heatpipes for space-constrained ITX systems. It provides quiet cooling at 22.4 dBA or less while mounting securely via an all-metal backplate.
Thermalright 53mm Low-Profile CPU Cooler
Best for: compact Mini-ITX and small-form-factor builds
- Socket Compatibility
- AM4, AM5, LGA115x, LGA1200, LGA1851
- Cooler Height
- 53mm
- Heat Pipes
- 4
- Tower Design
- Low-Profile
- Fan Size
- 90mm
- Color
- Black
View on Amazon: Thermalright 53mm Low-Profile CPU Cooler (paid link)
This low-profile cooler stands 53mm tall and features four 6mm heat pipes paired with a 90mm PWM fan. It runs at noise levels up to 22.4 dBA and draws up to 0.2A on a 12V connection. You get mounting hardware for AMD AM4 and AM5 along with Intel LGA 115X, 1200, and 1851 sockets. It suits you if you build inside compact small-form-factor enclosures.
Pros
- Total height of 53mm fits compact small-form-factor cases
- Four 6mm heat pipes with secondary reflow soldering
- Maximum rated fan noise level of 22.4 dBA
- Black nickel plating protects against corrosion
Cons
- Uses a 90mm fan rather than a standard 120mm size
- Limited to four heat pipes compared to larger tower coolers
Good fit if
- You need a low-profile cooler under 55mm total clearance.
- You run an AMD AM4, AM5, or Intel LGA 115X, 1200, or 1851 system.
- You want a black finish with low rated noise up to 22.4 dBA.
Skip if
- You have room for a full-sized 120mm tower cooler.
- You require more than four heat pipes for extreme cooling demands.
Verdict: Thermalright 53mm Low-Profile CPU Air Cooler delivers compact cooling with four 6mm heat pipes and a 53mm total height. It is a solid choice when your case cannot fit a standard tower cooler.
Thermalright Dual Tower 5-Heatpipe CPU Cooler
Best for: high-TDP processors needing tall RAM clearance
- Socket Compatibility
- AM4, AM5, LGA1150, LGA1200, LGA1700
- Cooler Height
- 160 mm
- Heat Pipes
- 5
- Tower Design
- Dual-Tower
- Fan Size
- 120 mm, 140 mm
- TDP Rating
- 275 W
View on Amazon: Thermalright Dual Tower 5-Heatpipe CPU Cooler (paid link)
This dual-tower aluminum cooler features five 8mm heat pipes and handles thermal loads up to 275W TDP. It pairs a 120mm front fan with a 140mm center fan, delivering up to 95.5 CFM of airflow while keeping maximum noise at 30.2 dB(A). The offset design maintains clearance for memory modules up to 62mm tall. It suits your build if you run high-wattage desktop processors in standard PC cases.
Pros
- High thermal capacity rated for up to 275W TDP
- Five 8mm heat pipes with AGHP technology
- Dual PWM fans provide airflow up to 95.5 CFM
- Asymmetric layout clears RAM modules up to 62mm tall
Cons
- Requires a chassis width greater than 210mm and 160mm height clearance
- Heavy dual-tower structure weighing 1.34 kg
- No integrated RGB lighting included
Good fit if
- You run a high-wattage processor requiring up to 275W TDP cooling.
- You use tall RAM modules measuring up to 62mm.
- You have a PC chassis wider than 210mm with at least 160mm cooler clearance.
Skip if
- You use a compact or slim PC case narrower than 210mm.
- You need a lightweight heatsink under 1 kg.
Verdict: Thermalright Dual Tower 140mm CPU Cooler provides substantial cooling headroom with five 8mm heat pipes and a 275W TDP rating. It delivers high airflow across two heatsinks while maintaining clearance for tall memory modules.
Thermalright Peerless Assassin Dual Tower Air Cooler
Best for: dual-tower cooling in standard desktop builds
- Socket Compatibility
- AM4, AM5, LGA1700, LGA1851, LGA1200
- Cooler Height
- 155 mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
View on Amazon: Thermalright Peerless Assassin Dual Tower Air Cooler (paid link)
This dual-tower CPU air cooler pairs six 6mm copper heat pipes with two 120mm PWM fans running up to 1,550 RPM. Measuring 155mm in height, it generates up to 66.17 CFM of airflow per fan with a maximum rated noise level of 25.6 dB(A). It mounts to Intel LGA 1700, 1851, and AMD AM4 and AM5 platforms. You get dual-tower thermal capacity designed for standard desktop cases with at least 155mm clearance.
Pros
- Six 6mm copper heat pipes with AGHP technology
- Dual 120mm PWM fans delivering up to 66.17 CFM airflow
- Maximum noise level rated at 25.6 dB(A)
- Wide socket support including Intel LGA 1700 and AMD AM5
Cons
- Requires original AMD motherboard backplate for AM4 and AM5 installation
- Total height of 155mm will not fit compact or slim cases
- Base model includes no built-in lighting
Good fit if
- You have a PC case with at least 155mm of cooler clearance.
- You want a dual-tower heatsink equipped with two 120mm PWM fans.
- You run an Intel LGA 1700, LGA 1851, or AMD AM4/AM5 processor.
Skip if
- You build inside a compact small-form-factor case.
- You no longer have your AMD motherboard's original stock backplate.
Verdict: Thermalright Peerless Assassin Dual 120mm Cooler provides dual-tower cooling performance using six 6mm heat pipes and two 120mm PWM fans. It is an effective thermal solution for standard mid-tower chassis configurations with 155mm of clearance.
Thermalright Assassin X120 120mm Air Cooler
Best for: mid-sized PC builds needing quiet 120mm cooling
- Socket Compatibility
- AM4, AM5, LGA1700, LGA1851, LGA1200
- Cooler Height
- 148 mm
- Heat Pipes
- 4
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
- Material
- Aluminum
View on Amazon: Thermalright Assassin X120 120mm Air Cooler (paid link)
This Thermalright cooler is a compact single-tower air cooler designed for mainstream desktop builds. At 148 mm tall, it fits easily inside standard mid-sized cases without vertical clearance issues. Four 6 mm heat pipes transfer thermal energy into an aluminum heatsink, while a single 120 mm PWM fan delivers up to 66.17 CFM of airflow at noise levels under 25.6 dB(A). It gives you dependable cooling across Intel and AMD platforms.
Pros
- Compact 148 mm height fits medium-sized computer cases
- 120 mm PWM fan delivers up to 66.17 CFM of airflow
- Maximum noise level stays under 25.6 dB(A)
- Four 6 mm heat pipes counter gravity effects in horizontal or vertical mounting
- Supports Intel LGA 1700/1851 and AMD AM4/AM5 sockets
Cons
- Single-fan design moves less overall air than dual-tower, dual-fan models
- Features four heat pipes rather than six found on larger alternatives
Good fit if
- You have a mid-sized case with 148 mm of cooler clearance.
- You want a single 120 mm PWM fan rated for quiet operation under 25.6 dB(A).
- You run a modern Intel LGA 1700/1851 or AMD AM4/AM5 processor.
Skip if
- You need a dual-tower cooler with two fans for heavy overclocking.
- You require five or six heat pipes for higher heat dissipation.
Verdict: Thermalright Assassin X 120mm CPU Air Cooler delivers dependable heat management in a compact 148 mm profile with four heat pipes and a quiet 120 mm fan. It is a practical fit for everyday PC cases requiring broad socket compatibility.
Thermalright Peerless Assassin 120 White
Best for: white mid-tower builds needing dual-fan cooling
- Cooler Height
- 157 mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1500 RPM
- Lighting
- ARGB
View on Amazon: Thermalright Peerless Assassin 120 White (paid link)
This dual-tower air cooler pairs six 6mm copper heat pipes with two 120mm PWM fans to handle demanding desktop processors. At 157mm tall, it fits standard mid-tower computer cases while using an offset asymmetric layout to maintain clearance for your memory modules and primary graphics slot. If you want dual-fan airflow rated up to 66.17 CFM with a noise ceiling of 25.6 dB(A), this white heatsink fits your build.
Pros
- Six 6mm copper heat pipes using AGHP anti-gravity design
- Dual 120mm PWM fans delivering up to 66.17 CFM of airflow
- Offset asymmetric base ensures memory slot and PCIe clearance
- Quiet operation with maximum noise rated at 25.6 dB(A)
Cons
- Height of 157mm does not fit small form factor or slim cases
- Total assembly weight of 1.02kg puts heavy load on the socket
Good fit if
- You need a dual-tower white cooler that avoids blocking RAM slots
- You run an AMD AM4/AM5 or Intel LGA 1700/1851 desktop processor
- You have a PC case with at least 157mm of CPU cooler clearance
Skip if
- You are building inside a compact mini-ITX enclosure
- You prefer a lightweight single-tower cooler under one kilogram
Verdict: Thermalright Peerless Assassin 120 White CPU Cooler delivers dual-tower cooling capacity across six 6mm heat pipes without blocking memory access. It provides high airflow at moderate noise levels for compatible mid-tower PC cases.
Thermalright Peerless Assassin 120 White ARGB Cooler
Best for: white mid-tower builds needing ARGB dual-tower cooling
- Cooler Height
- 155 mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
- Lighting
- ARGB
View on Amazon: Thermalright Peerless Assassin 120 White ARGB Cooler (paid link)
This dual-tower air cooler features six 6 mm heat pipes and an all-white finish with integrated ARGB lighting. It uses two 120 mm PWM fans that reach up to 1,550 RPM, delivering up to 66.17 CFM of airflow at 25.6 dB(A) or less. Standing 155 mm tall, it suits you if you need reliable dual-fan cooling for modern Intel LGA 1700, LGA 1851, or AMD AM4 and AM5 processors in a standard desktop case.
Pros
- Six 6mm copper heat pipes with AGHP technology
- Dual 120mm PWM fans moving up to 66.17 CFM of air
- Quiet operation with maximum noise level of 25.6 dB(A)
- Wide socket support including Intel LGA 1851, 1700, and AMD AM5
Cons
- 155mm overall height limits installation in compact cases
- Large 135mm width requires checking memory slot clearance
Good fit if
- You want a dual-tower white cooler with integrated ARGB lighting.
- You use an AMD AM4/AM5 or Intel LGA 1700/1851 platform.
- You have a PC case with at least 155mm of cooler clearance.
Skip if
- You build in a small-form-factor case with under 155mm clearance.
- You prefer an all-black aesthetic without RGB lighting.
Verdict: Thermalright Peerless Assassin 120 SE White ARGB provides dual-tower cooling with six heat pipes and addressable RGB fans for standard desktop builds. Its 155 mm height and broad socket support deliver balanced thermal performance across current Intel and AMD platforms.
Thermalright Assassin X 120 ARGB Cooler
Best for: mid-sized setups needing compact 148mm cooling
- Cooler Height
- 148 mm
- Heat Pipes
- 4
- Tower Design
- Single-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
- Lighting
- ARGB
View on Amazon: Thermalright Assassin X 120 ARGB Cooler (paid link)
The Thermalright Assassin X 120 ARGB Air Cooler is a single-tower heatsink built with four 6mm heat pipes and a pure copper base. It stands 148mm tall, fitting medium-sized computer cases where taller coolers cannot clear. The included 120mm PWM fan delivers up to 66.17 CFM of airflow at 25.6 dB(A) maximum noise. It suits you if you need compact cooling for standard Intel or AMD sockets with integrated lighting.
Pros
- Compact 148mm total height fits mid-sized PC cases
- Four 6mm AGHP copper heat pipes with pure copper base
- 120mm PWM fan delivers up to 66.17 CFM airflow at 25.6 dB(A)
- Mounts to modern Intel LGA 1700/1851 and AMD AM4/AM5 sockets
Cons
- Single-tower design uses four heat pipes instead of dual towers
- S-FDB fan bearing rated for 20,000 hours service life
Good fit if
- You have a computer case with cooler clearance under 150mm.
- You want an ARGB 120mm PWM fan that stays at or below 25.6 dB(A).
- You use an Intel LGA 1700/1851 or AMD AM4/AM5 platform.
Skip if
- You need a dual-tower heatsink with six or more heat pipes.
- You prefer a plain heatsink setup without ARGB lighting.
Verdict: Thermalright Assassin X 120 ARGB Air Cooler provides a balanced 148mm single-tower heatsink with 66.17 CFM airflow for mid-sized builds. It is a dependable choice when you need broad Intel and AMD compatibility without excessive height.
Thermalright Burst Assassin 120 ARGB
Best for: mid-tower systems needing six-pipe single-tower cooling
- Socket Compatibility
- AM4, AM5, LGA1700/1851/1150/1151/1200
- Cooler Height
- 154 mm
- Heat Pipes
- 6
- Tower Design
- Single-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
View on Amazon: Thermalright Burst Assassin 120 ARGB (paid link)
The Thermalright Burst Assassin 120 ARGB is a single-tower CPU cooler equipped with six 6mm copper heat pipes and a pure copper base. Standing 154mm tall, it fits medium-sized cases and provides cooling via a 120mm PWM fan that pushes up to 66.17 CFM at 25.6 dB(A). It suits you if you need a standard-height air cooler with ARGB lighting for mainstream Intel or AMD sockets.
Pros
- Six 6mm copper heat pipes with AGHP technology
- Pure copper base paired with an aluminum heatsink
- 120mm PWM fan delivers up to 66.17 CFM airflow
- Supports Intel LGA 1700/1851 and AMD AM4/AM5 sockets
Cons
- 154mm height is too tall for compact low-profile cases
- Single-fan setup provides less total fin area than dual-tower coolers
Good fit if
- You have a mid-tower case with at least 154mm of CPU clearance.
- You want a single-tower layout featuring six heat pipes and ARGB lighting.
- You build on modern platforms such as Intel LGA 1700/1851 or AMD AM5.
Skip if
- You are building an ultra-compact ITX system requiring low-profile hardware.
- You prefer a dual-tower heatsink with two fans for higher air volume.
Verdict: Thermalright Burst Assassin 120 ARGB Single-Tower Cooler combines six heat pipes with a 154mm profile to deliver focused single-tower cooling. It balances moderate case clearance with broad modern socket compatibility.
Thermalright AXP120-X67 Low Profile Cooler
Best for: compact builds needing 120mm low-profile cooling
- Socket Compatibility
- AM4, LGA 1700, 1851, 1200, 2011, 2066
- Cooler Height
- 67 mm
- Heat Pipes
- 6
- Tower Design
- Low-Profile
- Fan Size
- 120 mm
- Fan Speed
- 1800 RPM
View on Amazon: Thermalright AXP120-X67 Low Profile Cooler (paid link)
The Thermalright AXP120-X67 Low-Profile Cooler is a compact heatsink designed for small-form-factor builds where vertical clearance is limited. Standing 67mm tall including its slim 120mm fan, it pairs six 6mm copper heatpipes with an aluminum fin array and copper base. If you need capable cooling inside a cramped desktop chassis without sacrificing a full-diameter 120mm fan design, this unit provides up to 59 CFM of airflow at 26.1 dB(A).
Pros
- Total height of 67mm fits compact small-form-factor enclosures
- Six 6mm copper heatpipes with pure copper base plate
- Slim 120mm PWM fan delivers airflow up to 59 CFM
- Operational noise rating capped at 26.1 dB(A)
Cons
- No AMD AM5 mounting compatibility listed in specifications
- Width of 120mm may crowd adjacent motherboard components
Good fit if
- You build inside a compact case with at least 67mm of cooler clearance.
- You want a slim 120mm fan rather than a smaller 90mm or 92mm alternative.
- You run an AMD AM4 or compatible Intel desktop processor socket.
Skip if
- You need native out-of-the-box support for an AMD AM5 processor.
- You have an ultra-slim enclosure requiring a cooler under 50mm tall.
Verdict: Thermalright AXP120-X67 Low-Profile Cooler packs six heatpipes and a slim 120mm fan into a 67mm vertical profile. It is a solid choice for compatible small-form-factor systems needing quiet, high-airflow CPU cooling.
Thermalright AXP120 67mm Low-Profile Cooler
Best for: compact PC cases needing low-profile cooling
- Socket Compatibility
- AM4, AM5, LGA 1700, 1200, 1150, 1151
- Cooler Height
- 67 mm
- Heat Pipes
- 6
- Tower Design
- Low-Profile
- Fan Size
- 120 mm
- Fan Speed
- 1800 RPM
View on Amazon: Thermalright AXP120 67mm Low-Profile Cooler (paid link)
This is a compact down-draft air cooler designed for small-form-factor desktop setups. It measures 67 mm tall and uses six 6 mm heat pipes paired with a pure copper base. A slim 15 mm PWM fan pushes up to 59 CFM of airflow at noise levels up to 26.1 dB(A). You get socket support across Intel LGA 1700 and AMD AM4 platforms in tight enclosures where standard tower coolers cannot fit.
Pros
- Low 67 mm total height fits compact small-form-factor cases
- Six 6 mm sintered copper heat pipes with AGHP technology
- Slim 120 mm PWM fan delivers up to 59 CFM of airflow
- Maximum rated fan noise stays at or below 26.1 dB(A)
Cons
- No AMD AM5 support listed in the specifications
- Total height of 67 mm exceeds clearance limits in ultra-slim cases under 50 mm
Good fit if
- You need a cooler under 70 mm for a small-form-factor chassis.
- You use an Intel LGA 1700 or AMD AM4 motherboard.
- You want a slim 120 mm PWM fan paired with six copper heat pipes.
Skip if
- You use an AMD processor on the AM5 socket platform.
- You have an ultra-slim enclosure with less than 67 mm of cooler clearance.
Verdict: Thermalright 67mm Low-Profile CPU Cooler delivers six heat pipes and a 120 mm slim fan in a compact form factor. It provides a balanced cooling setup for space-constrained Intel and AM4 systems.
Specifications side by side
| Spec | Thermalright 53mm Low Profile ITX CPU Cooler | Thermalright Peerless Assassin 120 Dual Fan Cooler | Thermalright Peerless Assassin 120 White Dual Tower | Thermalright 47mm Low-Profile CPU Cooler | Thermalright AXP90 36mm Low-Profile Cooler | Thermalright 53mm Low-Profile CPU Cooler | Thermalright Dual Tower 5-Heatpipe CPU Cooler | Thermalright Peerless Assassin Dual Tower Air Cooler | Thermalright Assassin X120 120mm Air Cooler | Thermalright Peerless Assassin 120 White | Thermalright Peerless Assassin 120 White ARGB Cooler | Thermalright Assassin X 120 ARGB Cooler | Thermalright Burst Assassin 120 ARGB | Thermalright AXP120-X67 Low Profile Cooler | Thermalright AXP120 67mm Low-Profile Cooler |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Socket Compatibility | not specified | not specified | AM4, AM5, LGA115x/1200/1700/1851/2011 | AM4, AM5, LGA115x/1200/1700/1851 | AM4, AM5, LGA1150/1151/1200/1700/1851 | AM4, AM5, LGA115x, LGA1200, LGA1851 | AM4, AM5, LGA1150, LGA1200, LGA1700 | AM4, AM5, LGA1700, LGA1851, LGA1200 | AM4, AM5, LGA1700, LGA1851, LGA1200 | not specified | not specified | not specified | AM4, AM5, LGA1700/1851/1150/1151/1200 | AM4, LGA 1700, 1851, 1200, 2011, 2066 | AM4, AM5, LGA 1700, 1200, 1150, 1151 |
| Cooler Height | 53mm | 157mm | 157mm | 47mm | 36mm | 53mm | 160 mm | 155 mm | 148 mm | 157 mm | 155 mm | 148 mm | 154 mm | 67 mm | 67 mm |
| Heat Pipes | 4 | 6 | 6 | 4 | 4 | 4 | 5 | 6 | 4 | 6 | 6 | 4 | 6 | 6 | 6 |
| Tower Design | Low Profile | Double tower | Dual-Tower | Low-Profile | Low-Profile | Low-Profile | Dual-Tower | Dual-Tower | not specified | Dual-Tower | Dual-Tower | Single-Tower | Single-Tower | Low-Profile | Low-Profile |
| Fan Size | 92mm | 120mm | 120mm | 92mm | not specified | 90mm | 120 mm, 140 mm | 120 mm | 120 mm | 120 mm | 120 mm | 120 mm | 120 mm | 120 mm | 120 mm |
| TDP Rating | not specified | not specified | not specified | not specified | not specified | not specified | 275 W | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Fan Speed | 2700RPM ± 10% | 1550rpm±10% | 1550 RPM | not specified | not specified | not specified | 1850 RPM | 1550 RPM | 1550 RPM | 1500 RPM | 1550 RPM | 1550 RPM | 1550 RPM | 1800 RPM | 1800 RPM |
| Lighting | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | ARGB | ARGB | ARGB | ARGB | not specified | not specified |
| System Type | ITX | not specified | not specified | ITX | ITX | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Color | AXP90 X53 | PA120 | White | Black | AXP90-X36 | Black | Black | PA120 SE | not specified | White | White | AX120R SE ARGB | BA120 ARGB | AXP120-X67 1700 | AXP120-X67 |
| Material | not specified | not specified | not specified | not specified | not specified | not specified | Aluminum | not specified | Aluminum | Aluminum | Aluminum | not specified | not specified | not specified | not specified |
| Features | not specified | not specified | not specified | Fan | Fan | Fan | Fan | not specified | Fan | Fan | Fan | Fan | Fan | Fan | Fan |
| Dimensions | 3.72 × 3.74 × 2.09 inches | 6.18 × 5.31 × 4.92 inches | 6.18 × 5.31 × 4.92 inches | 3.74 × 3.74 × 1.26 inches | 3.74 × 3.7 × 0.83 inches | 3.7 × 3.74 × 1.5 inches | 6.3 × 5.75 × 5.51 inches | 6.1 × 5.31 × 4.92 inches | 4.72 × 2.8 × 5.83 inches | 6.18 × 5.31 × 4.92 inches | 4.92 × 5.31 × 6.1 inches | 4.92 × 2.8 × 5.83 inches | 4.9 × 2 × 6 inches | 4.86 × 4.72 × 2.64 inches | 4.86 × 4.72 × 2.6 inches |
| Weight | 1.1 pounds | 1 pounds | 2.2 pounds | 1.1 pounds | 14.4 ounces | 1 pounds | 2.2 pounds | 2 pounds | 1.42 pounds | 2 pounds | 1.87 pounds | 1.39 pounds | 1.12 pounds | 1.34 pounds | 1.34 pounds |
| Size | 53mm | PA120 series | PA120 series | Height 47mm | Height 36mm | Height 53mm | 5 Heat Pipes | PA120 SE series | not specified | not specified | PA120 SE series | 4 Heatpies | 4 Heatpies | Height 67mm | 67mm |
| Model | AXP90 X53 | LM-PA 120 | pa120 White | AXP90 X47 BLACK | AXP90 X36 | AXP90 X53 BLACK | FC140 BLACK | PA120 SE | AX120 Refined SE | PA120 White-D2 | not specified | not specified | BA120 ARGB-D1 | AXP120-X67 1700-d2 | AXP120-X67 1700-d6 |
Thermalright CPU Cooler Lineup Overview
Thermalright divides this lineup by system type and physical clearance. Low-profile models fit space-constrained ITX builds where vertical clearance is limited. The Thermalright AXP90 36mm Low-Profile Cooler provides four heat pipes within a 36mm height for ultra-compact cases. If you have slightly more room, the Thermalright AXP120-X67 Low Profile Cooler pairs six heat pipes with a 120mm fan in a 67mm profile.
For standard PC cases, you choose between single-tower and dual-tower designs. The Thermalright Burst Assassin 120 ARGB uses a single-tower design with six heat pipes and integrated lighting. For greater airflow, dual-tower options like the Thermalright Peerless Assassin 120 Dual Fan Cooler provide two 120mm fans and six copper heat pipes. These dual-tower options suit full-sized cases with standard vertical clearance.
Where Thermalright Fits Your Build
Thermalright suits setups ranging from tight mini-ITX cases to full desktop chassis. You can select low profile coolers measuring 36mm to 67mm in height, or move up to 148mm single tower and large dual tower heatsinks. Options include black, white, and ARGB lighting finishes utilizing four, five, or six heat pipes.
The lineup has clear gaps. You will not find liquid coolers, digital display screens, or fanless passive units here. The range also skips intermediate cooler heights between 67mm and 148mm. You must choose between very low clearance hardware or tall desktop towers.
If your system requires liquid hardware instead of an air tower, you can evaluate each thermalright aio liquid cooler by radiator size and pump specifications.
How to Choose a Thermalright Cooler
-
Verify Socket Compatibility
Motherboard sockets dictate whether a heatsink mounts securely to your processor. Thermalright coolers cover various modern and legacy platforms, including AMD AM4 and AM5 alongside Intel LGA 1851, LGA 1700, and LGA 1200. However, compatibility is not uniform across every model. For example, the Thermalright 53mm Low-Profile CPU Cooler supports AM4 and Intel sockets including LGA 1851, but omits AM5. Always verify that your exact motherboard socket is explicitly listed in the cooler specifications before you finalize your hardware selection.
-
Evaluate Heat Pipe Design
Heat pipes transfer thermal energy away from the CPU contact base into aluminum fins. In this lineup, you will find designs using four, five, or six heat pipes. Standard low-profile and single-tower units typically employ four or six 6mm pipes. If you need higher thermal headroom, check pipe diameter alongside quantity. For example, the Thermalright Dual Tower 5-Heatpipe CPU Cooler uses five thicker 8mm heat pipes to support a rated 275W TDP. Selecting thicker pipes or higher pipe counts increases heat transfer for demanding processors.
-
Check Vertical Case Clearance
Heatsink height must stay within your PC chassis CPU cooler clearance limits. Thermalright produces heatsinks in multiple vertical classes to match diverse cases. Dual-tower models require standard mid-tower depth. For example, the Thermalright Peerless Assassin Dual Tower Air Cooler requires 155mm of vertical clearance to close your side panel. Single towers often sit lower at 148mm, while small-form-factor units range from 36mm to 67mm. Measure the space between your motherboard CPU socket and the case window before you select a tower height.
-
Balance Tower Configuration
Choosing between single-tower and dual-tower heatsinks involves balancing airflow volume against motherboard clearance. Single-tower options feature a narrower footprint that avoids crowding surrounding motherboard memory slots. Meanwhile, dual-tower heatsinks use twin fin stacks and two fans to push more air over expanded surface area. For instance, the Thermalright Peerless Assassin 120 Dual Fan Cooler uses dual fin stacks paired with two 120mm fans for heavy cooling tasks. Pick a single tower for tighter component spacing, or a dual tower when your case accommodates dual fans.
-
Match Low-Profile Cooler Heights
Mini-ITX cases require low-profile coolers that fit within extremely restricted vertical enclosures. In small-form-factor builds, every millimeter counts toward panel clearance and proper airflow. Thermalright provides compact options at 36mm, 47mm, 53mm, and 67mm heights. For ultra-compact enclosures, the Thermalright AXP90 36mm Low-Profile Cooler fits under tight power supplies and brackets with its 36mm height, all-metal backplate, and 22.4 dBA or lower sound profile. If your ITX case allows more headroom, larger low-profile options with 120mm slim fans offer increased surface area.
-
Select Lighting and Color
Aesthetic specifications let you match the cooler to your system theme without changing core cooling mechanics. Thermalright offers standard aluminum, matte black, and all-white finishes. Furthermore, some models include addressable RGB fans to illuminate your internal build. For example, the Thermalright Burst Assassin 120 ARGB integrates configurable lighting into a six-pipe single tower. If you prefer a clean setup without illumination, non-ARGB black or white heatsinks provide the same heatsink structure while eliminating extra lighting header connections from your motherboard.
Frequently asked questions
Which Thermalright cooler handles high-TDP processors?
The Thermalright Dual Tower 5-Heatpipe CPU Cooler is specified for processors up to a 275W TDP rating. It uses five 8mm heat pipes and dual aluminum heatsinks to maximize thermal dissipation. This model is engineered to provide sufficient physical clearance for taller system memory modules while supporting AM4, AM5, LGA 1200, LGA 1150, and LGA 1151 sockets.
What case clearance is needed for the Thermalright Peerless Assassin Dual Tower Air Cooler?
You need a PC chassis with at least 155mm of CPU cooler clearance to install the Thermalright Peerless Assassin Dual Tower Air Cooler. The heatsink assembly pairs two 120mm PWM fans with six 6mm copper heat pipes. Its dual-tower architecture is sized specifically for standard mid-tower computer cases rather than compact or slim small-form-factor enclosures.
How loud is the Thermalright AXP90 36mm Low-Profile Cooler during operation?
The Thermalright AXP90 36mm Low-Profile Cooler operates at a specified noise level of 22.4 dBA or less. It achieves this quiet sound output using a low-profile fan paired with four 6mm heat pipes. The cooler uses an all-metal backplate mounting setup to secure its 36mm tall heatsink assembly firmly inside ultra-compact Mini-ITX cases.
Which Thermalright cooler provides six heat pipes in a single tower?
The Thermalright Burst Assassin 120 ARGB delivers six heat pipes in a single-tower heatsink format. It stands at a total height profile of 154mm, making it more compact vertically than large dual-tower alternatives. The cooler integrates ARGB lighting and mounts to modern desktop motherboard sockets including AMD AM4 and AM5 as well as Intel LGA 1851 and LGA 1700.
What airflow output does the Thermalright Assassin X 120 ARGB Cooler produce?
The Thermalright Assassin X 120 ARGB Cooler delivers an airflow rating of 66.17 CFM. This single-tower cooler incorporates four heat pipes and stands 148mm tall, which fits comfortably inside mid-sized desktop enclosures. It also features integrated addressable RGB lighting and supports Intel LGA 1851, LGA 1200, LGA 1150, LGA 1151, and AMD AM4 and AM5 motherboard platforms.
Does Thermalright make a low-profile cooler with a 120mm fan?
Yes, the Thermalright AXP120-X67 Low Profile Cooler incorporates a slim 120mm fan into a heatsink that stands 67mm tall. It utilizes six heat pipes to pull thermal energy across its cooling fins. This configuration provides higher airflow dissipation than smaller sub-50mm designs while remaining short enough to fit inside tight small-form-factor and compact desktop cases.
What noise level does the Thermalright Peerless Assassin 120 White operate at?
The Thermalright Peerless Assassin 120 White Dual Tower operates at an official acoustic level of 25.6 dB(A). It pairs dual cooling towers with six heat pipes to maintain stable operating temperatures while minimizing audible fan noise. This all-white model is designed for full-sized desktop chassis requiring support across Intel LGA 1851, LGA 1200, and AMD AM4 and AM5 sockets.