Best CPU Coolers with 4 Heat Pipes: 15 Spec-Based Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Choosing the right CPU cooler with 4 Heat Pipes balances thermal dissipation and case clearance for your system build. We compared 15 models strictly using specifications published on the listings.
The Cooler Master MasterAir MA410M ARGB Air Cooler leads our lineup because its push-pull dual fans, Continuous Direct Contact base, and built-in thermal sensor deliver direct cooling and real-time monitoring. This guide helps you decide on the proper cooler for your desktop build by comparing socket support, physical height clearance, and fan configurations.
Quick picks
The best fit for you
- You want push-pull airflow with real-time thermal monitoring Cooler Master MasterAir MA410M ARGB Air Cooler Dual push-pull fans and a built-in thermal sensor deliver cooling across four direct-contact heat pipes.
- You need the lowest profile cooler for compact builds ID-COOLING 45mm Low-Profile CPU Cooler A 45mm total height allows four heat pipes to fit inside cramped small-form-factor enclosures.
- You want an all-white tower cooler with ARGB Cooler Master Hyper 212 Halo ARGB Cooler The white chassis features ARGB illumination, a copper base, and four heat pipes.
- You need unrestricted RAM clearance with modern sockets ID-COOLING 120mm Black CPU Air Cooler Its heatsink footprint clears memory slots while four direct-contact heat pipes manage heat.
Our 15 picks
Cooler Master MasterAir MA410M ARGB Air Cooler
Best for: Push-pull cooling with visual thermal monitoring
- Heat Pipes
- 4 Heat Pipes
- Socket Compatibility
- AM4, LGA1200, LGA1151
- Lighting
- ARGB
- Material
- Copper, Aluminum
- Dimensions
- 6.5 × 9.1 × 6.1 inches
- Weight
- 2.5 pounds
View on Amazon: Cooler Master MasterAir MA410M ARGB Air Cooler (paid link)
The Cooler Master MasterAir MA410M ARGB is a tower cooler equipped with four continuous direct-contact heat pipes and a push-pull dual-fan setup. It delivers up to 53.38 CFM of airflow to manage processor heat efficiently. You also get an onboard thermal detection sensor that changes the 28 addressable RGB LEDs based on temperature. It suits you if you want monitored cooling performance and direct airflow on supported Intel or AMD AM4 platforms.
Pros
- Four direct-contact heat pipes using Continuous Direct Contact 2.0
- Dual push-pull MF120R fans producing 53.38 CFM airflow
- Thermal detection sensor for hardware-based color temperature alerts
- 28 addressable RGB LEDs compatible with motherboard sync software
Cons
- Does not include mounting support for LGA 1700 or AM5 sockets
- Peak noise level reaches 31.0 decibels under load
- Requires 6.1 inches of vertical chassis clearance
Good fit if
- You run an AMD AM4 or compatible Intel processor socket.
- You want visual hardware temperature tracking without extra software.
- You want a preconfigured dual-fan push-pull configuration.
Skip if
- You are building on newer Intel LGA 1700 or AMD AM5 motherboards.
- You need an acoustic profile lower than 31.0 decibels.
- You have a slim or compact chassis with under 6.1 inches of cooler clearance.
Verdict: Cooler Master MasterAir MA410M ARGB provides capable four-pipe heat dissipation thanks to its push-pull dual fans and Continuous Direct Contact base. Its built-in thermal sensor gives you real-time visual temperature feedback on supported legacy and AM4 platforms.
Cooler Master Hyper 212 Black CPU Cooler
Best for: mid-tower AM5 and LGA 1851 or 1700 builds
- Heat Pipes
- 4 Heat Pipes
- Socket Compatibility
- AM5, LGA 1851, LGA 1700
- Cooler Height
- 152mm
- Fan Speed
- 2,500 RPM
- Color
- Black
- Features
- Fan
View on Amazon: Cooler Master Hyper 212 Black CPU Cooler (paid link)
This tower air cooler features four heat pipes paired with a copper base to manage heat on AMD R7 and Intel i7 processors. You get a SickleFlow 120 Edge PWM fan with a speed range of 690 to 2,500 RPM, along with included thermal paste. At 152mm tall, it fits standard mid-tower setups and supports AM5 and LGA 1851 or 1700 sockets.
Pros
- Four heat pipes paired with a copper base
- Wide PWM fan speed range of 690 to 2,500 RPM
- Mounting hardware for AM5, LGA 1851, and LGA 1700 sockets
- Includes thermal paste in the package
Cons
- No integrated RGB or lighting features
- Standing height of 152mm exceeds low-profile chassis limits
Good fit if
- You run an AMD R7 or Intel i7 CPU on an AM5, LGA 1851, or LGA 1700 platform.
- You want a fan capable of reaching up to 2,500 RPM under load.
- You have a PC chassis with at least 152mm of CPU cooler height clearance.
Skip if
- You require ARGB or RGB lighting on your cooler.
- You are building a compact system that requires a low-profile heatsink.
Verdict: Cooler Master Hyper 212 Black CPU Cooler delivers reliable cooling via four heat pipes, a copper base, and a 2,500 RPM PWM fan. It is a straightforward single-tower option for modern AM5 and Intel desktop builds.
ID-COOLING 45mm Low-Profile CPU Cooler
Best for: compact Mini-ITX and small form factor builds
- Heat Pipes
- 4 Heat Pipes
- Cooler Height
- 45mm
- Tower Design
- Low-Profile
- Fan Size
- 92mm
- Features
- Fan
- Dimensions
- 3.62 × 0.59 × 3.62 inches
View on Amazon: ID-COOLING 45mm Low-Profile CPU Cooler (paid link)
This ID-COOLING unit is a compact low-profile air cooler designed for small form factor systems. At 45mm in total height, it fits into tight mini-ITX cases where standard towers cannot clear. You get four heat pipes paired with a 92mm PWM fan that moves up to 46 CFM at 35.2 dB(A). It suits you if you need compact cooling for Intel LGA1700 or AMD AM5 sockets without blocking your RAM slots.
Pros
- Ultra-compact 45mm total height for small form factor cases
- Four heat pipes for heat dissipation
- 92mm PWM fan delivering up to 46 CFM airflow
- Compatible with both Intel LGA1700 and AMD AM5 sockets
Cons
- Top noise level reaches 35.2 dB(A)
- Airflow tops out lower than larger 120mm coolers
- No integrated RGB lighting
Good fit if
- You build in an HTPC, Mini-ITX, or small form factor case with low height clearance.
- You need clear memory clearance on compact motherboards.
- You use modern mainstream sockets including Intel LGA1700 or AMD AM5.
Skip if
- You have space in your case for a full-size 120mm tower cooler.
- You require a fan rated quieter than 35.2 dB(A) at maximum speed.
- You want built-in lighting features in your cooler.
Verdict: ID-COOLING 45mm Low-Profile CPU Cooler delivers four-pipe thermal transfer in a compact design built for tight spaces. It suits low-clearance chassis while maintaining broad socket and memory compatibility.
Thermalright 53mm Low-Profile CPU Cooler
Best for: compact small-form-factor PC builds
- Heat Pipes
- 4 Heat Pipes
- Socket Compatibility
- AM4, AM5, LGA115x, LGA1200, LGA1851
- Cooler Height
- 53mm
- Tower Design
- Low-Profile
- Fan Size
- 90mm
- Color
- Black
View on Amazon: Thermalright 53mm Low-Profile CPU Cooler (paid link)
This compact unit gives you four 6mm heat pipes in a low-profile design that stands 53mm tall. Built with an all-metal mounting platform and a 90mm PWM fan, it delivers cooling with a maximum noise rating of 22.4 dBA. It suits you if you are assembling a small-form-factor computer and need clearance for tight spaces while keeping compatibility across Intel and AMD sockets.
Pros
- Compact 53mm overall height for low-profile clearance
- Four 6mm heat pipes with black nickel plating
- Low rated operating noise of 22.4 dBA or less
- Supports modern sockets including AMD AM5 and Intel LGA 1851
Cons
- Uses a 90mm fan rather than a standard 120mm size
- No integrated RGB lighting
Good fit if
- You need a compact cooler with a 53mm maximum height.
- You want four 6mm heat pipes in a low-profile form factor.
- You require a quiet fan rated at 22.4 dBA or lower.
Skip if
- You prefer a full-sized 120mm tower cooler.
- You want built-in RGB lighting for your build.
Verdict: Thermalright 53mm Low Profile CPU Cooler provides four 6mm heat pipes and a 90mm PWM fan in a 53mm footprint. It is a solid choice when your case cannot fit full-sized tower coolers.
ARCTIC Freezer i35 A-RGB CPU Cooler
Best for: Intel systems needing addressable RGB cooling
- Heat Pipes
- 4 Heat Pipes
- Socket Compatibility
- Intel 1700, 1200, 115X
- Tower Design
- Single-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1700 RPM
- Lighting
- A-RGB
View on Amazon: ARCTIC Freezer i35 A-RGB CPU Cooler (paid link)
The ARCTIC Freezer i35 A-RGB is a single-tower CPU cooler equipped with 4 staggered heat pipes and a 120 mm pressure-optimized fan. It features an integrated 12-LED addressable RGB hub and includes 0.8 g of MX-5 thermal paste. Designed strictly for Intel 1700, 1200, and 115X sockets, it stands 6.24 inches tall. This suits you if you want streamlined Intel mounting with addressable lighting.
Pros
- Four staggered heat pipes paired with a 120 mm pressure-optimized fan
- 12 autonomous digital A-RGB LEDs in the fan hub
- Includes 0.8 g of non-conductive MX-5 thermal paste
- Backed by a 6-year manufacturer guarantee
Cons
- Supports only Intel sockets (1700, 1200, 115X) with no AMD hardware
- Height of 6.24 inches requires adequate chassis clearance
Good fit if
- You use an Intel LGA 1700, 1200, or 115X motherboard.
- You want addressable RGB illumination with included MX-5 paste.
- You have a PC case with at least 6.25 inches of CPU cooler clearance.
Skip if
- You use an AMD processor.
- You require a low-profile cooler for a compact chassis.
Verdict: ARCTIC Freezer i35 A-RGB CPU Cooler provides dedicated Intel socket cooling with four heat pipes, addressable lighting, and a six-year guarantee. It delivers focused hardware support if your system build uses compatible Intel platforms.
Thermalright Assassin X120 120mm Air Cooler
Best for: medium-sized PC cases needing quiet cooling
- Heat Pipes
- 4 Heat Pipes
- Socket Compatibility
- AM4, AM5, LGA1700, LGA1851, LGA1200
- Cooler Height
- 148 mm
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
- Material
- Aluminum
View on Amazon: Thermalright Assassin X120 120mm Air Cooler (paid link)
This single-tower heatsink features four 6mm heat pipes and a 120mm PWM fan. At 148mm tall, the compact tower fits inside medium-sized computer cases. The fan reaches 1550 RPM, delivering up to 66.17 CFM of airflow while keeping noise at or below 25.6 dB(A). It is built for you if you need a standard-clearance cooler that supports modern Intel LGA 1700 and 1851 or AMD AM4 and AM5 motherboard sockets.
Pros
- Four 6mm heat pipes built with AGHP anti-gravity technology
- Compact 148mm height fits medium-sized desktop cases
- 120mm PWM fan delivers up to 66.17 CFM at 25.6 dB(A) maximum noise
- Supports Intel LGA 1700/1851 and AMD AM4/AM5 sockets
Cons
- Single-fan setup rather than dual push-pull configuration
- No integrated RGB lighting hardware on this model
- S-FDB fan bearing service life rated at 20,000 hours
Good fit if
- You have a medium-sized computer case with at least 148mm of CPU clearance.
- You want quiet 120mm fan cooling that tops out at 25.6 dB(A).
- You use modern mainstream sockets such as AMD AM5 or Intel LGA 1851.
Skip if
- You require built-in RGB lighting for your system build.
- You need a dual-fan push-pull configuration out of the box.
Verdict: Thermalright Assassin X 120mm Air Cooler provides four-pipe thermal transfer inside a moderate 148mm height profile. It delivers wide Intel and AMD compatibility for standard desktop builds without added lighting hardware.
Jonsbo Compact White RGB CPU Cooler
Best for: compact builds needing sub-5-inch cooler height
- Heat Pipes
- 4 Heat Pipes
- Socket Compatibility
- LGA 1700/1200/115X, AM4/AM3/AM2/FM2
- Fan Size
- 92mm
- Fan Speed
- 2300 RPM
- Lighting
- RGB
- Color
- White
View on Amazon: Jonsbo Compact White RGB CPU Cooler (paid link)
The Jonsbo CR1400 White RGB CPU Cooler is a compact tower cooler equipped with four 6mm direct-contact copper heat pipes and 41 aluminum fins. It uses a removable 92mm PWM fan that reaches up to 2300 RPM, standing just under 5 inches tall. This fits your build if you have a smaller case requiring clearance under 5 inches while maintaining LGA 1700 or AM4 socket compatibility.
Pros
- Four 6mm direct-contact copper vacuum heat pipes
- Compact 4.96-inch height fits space-restricted cases
- Removable 92mm PWM fan reaching up to 2300 RPM
- Supports Intel LGA 1700 and AMD AM4 sockets
Cons
- Lacks listed support for AMD AM5 sockets
- Uses a smaller 92mm fan rather than a standard 120mm size
Good fit if
- You need a tower cooler under 5 inches in total height.
- You want a white heatsink with integrated RGB lighting and direct-touch pipes.
- You use compatible Intel LGA 1700 or AMD AM4 motherboards.
Skip if
- You are building on an AMD AM5 processor socket.
- You require a standard 120mm fan setup.
Verdict: Jonsbo CR1400 White RGB CPU Cooler delivers four direct-touch copper heat pipes in a compact sub-5-inch profile with 92mm PWM cooling. It provides a practical option when standard 120mm tower coolers exceed your chassis clearance.
ARCTIC Freezer 36 Dual Fan CPU Cooler
Best for: Intel builds wanting push-pull dual fan cooling
- Heat Pipes
- 4 Heat Pipes
- Socket Compatibility
- LGA1851, LGA1700
- Tower Design
- Single-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1800 RPM
- Dimensions
- 4.09 × 4.96 × 6.25 inches
View on Amazon: ARCTIC Freezer 36 Dual Fan CPU Cooler (paid link)
The ARCTIC Freezer 36 is a single-tower CPU cooler equipped with four offset heat pipes and two 120 mm fans in push-pull orientation. Standing 6.25 inches tall, it features a side-flow heatsink with open fins and a custom contact frame for Intel LGA1851 and LGA1700 sockets. It suits you if you run standard tower enclosures and want dual-fan airflow paired with a click installation system.
Pros
- Two pressure-optimised 120 mm fans in push-pull configuration
- Contact frame included for Intel LGA1851 and LGA1700 sockets
- Click installation system enables tool-free fan mounting
- 6 years of manufacturer warranty coverage
Cons
- 6.25-inch height requires sufficient clearance in compact cases
- Lacks integrated RGB or decorative lighting
Good fit if
- You use an Intel LGA1700 or LGA1851 processor platform.
- You want dual push-pull fans on a single-tower heatsink.
- You have a PC chassis supporting cooler heights of at least 6.25 inches.
Skip if
- You need a low-profile cooler for a compact build.
- You prefer built-in ARGB or RGB illumination.
Verdict: ARCTIC Freezer 36 Dual Fan CPU Cooler pairs four offset heat pipes with push-pull fans and an Intel contact frame. It delivers focused single-tower airflow backed by a 6-year warranty.
ID-COOLING 120mm Black CPU Air Cooler
Best for: compact builds needing clear RAM access
- Heat Pipes
- 4 Heat Pipes
- Fan Size
- 120mm
- Color
- Black
- Features
- Fan
- Dimensions
- 4.72 × 4.72 × 5.94 inches
- Weight
- 1 pounds
View on Amazon: ID-COOLING 120mm Black CPU Air Cooler (paid link)
This black single-tower heatsink from ID-COOLING relies on 4 direct-contact heat pipes paired with a 120mm PWM fan to move heat away from your processor. It delivers up to 70 CFM of airflow at noise levels reaching 28.9 dB(A). The slanted base preserves memory clearance on compact mini-ITX boards. It suits you if you need reliable cooling for modern Intel or AMD sockets without blocking RAM slots.
Pros
- 4 direct-contact heat pipes for CPU heat dissipation
- Generates up to 70 CFM of airflow
- Slanted heatsink prevents RAM interference on mini-ITX boards
- Supports modern Intel LGA1700 and AMD AM5 sockets
Cons
- Peak noise reaches 28.9 dB(A) at maximum fan speed
- No integrated RGB lighting included
Good fit if
- You need guaranteed RAM clearance on mini-ITX motherboards.
- You want high airflow up to 70 CFM with automatic PWM speed control.
- You are running current Intel LGA1700 or AMD AM4/AM5 processors.
Skip if
- You want built-in RGB or ARGB lighting.
- You prefer sub-25 dB(A) operation under full load.
Verdict: ID-COOLING 120mm Black CPU Air Cooler delivers strong airflow and 4 direct-contact heat pipes in a footprint shaped to clear your memory slots. It offers balanced, straightforward cooling for modern desktop sockets without adding visual clutter.
Cooler Master Hyper 212 Spectrum V3 ARGB Cooler
Best for: mainstream Ryzen 7 and Core i7 builds
- Heat Pipes
- 4 Heat Pipes
- Socket Compatibility
- AM5, LGA 1851, LGA 1700
- Cooler Height
- 152 mm
- Fan Size
- 120mm
- Fan Speed
- 650 to 1,750 RPM
- Lighting
- ARGB
View on Amazon: Cooler Master Hyper 212 Spectrum V3 ARGB Cooler (paid link)
The Cooler Master Hyper 212 Spectrum V3 ARGB Cooler is a single-tower CPU cooler built with four heat pipes and a nickel-plated copper base. At 152 mm tall, it fits standard mid-tower enclosures easily. You get a 120 mm PWM fan with frosted blades and ARGB lighting that runs between 650 and 1,750 RPM. This setup suits you if you need reliable cooling for AMD Ryzen 7 or Intel Core i7 processors on modern sockets.
Pros
- Four heat pipes paired with a nickel-plated copper base
- 120 mm PWM fan with an adjustable 650 to 1,750 RPM range
- Moderate 152 mm height fits standard computer cases
- Mounting brackets support AM5, LGA 1851, and LGA 1700 sockets
Cons
- Comes with only a single cooling fan
- Airflow CFM and static pressure metrics are not specified
Good fit if
- You run an AMD Ryzen 7 or Intel Core i7 processor.
- You need a 152 mm cooler height to fit inside your case.
- You want customizable ARGB lighting integrated into the fan blades.
Skip if
- You require a dual-fan push-pull configuration out of the box.
- You build on older legacy sockets not covered by the included mounting hardware.
Verdict: Cooler Master Hyper 212 Spectrum V3 ARGB Cooler provides dependable 4-heatpipe cooling and vivid lighting inside a compact 152 mm frame. It is an effective direct fit for modern AM5 and LGA 1700 or LGA 1851 platforms.
Cooler Master Hyper 212 Halo ARGB Cooler
Best for: White-themed AM5 and LGA 1700 builds
- Heat Pipes
- 4 Heat Pipes
- Socket Compatibility
- AM5, LGA 1700, LGA 1851
- Cooler Height
- 154mm
- Fan Speed
- 1,800 RPM
- Lighting
- ARGB
- Color
- White
View on Amazon: Cooler Master Hyper 212 Halo ARGB Cooler (paid link)
This single-tower air cooler pairs four heat pipes and a copper base with a 154 mm total height for chassis clearance. You get an MF120 Halo² PWM fan operating between 690 and 1,800 RPM via a 4-pin header, combined with dual-loop ARGB ring lighting. It includes mounting hardware for AM5, LGA 1700, and LGA 1851 platforms. It suits your setup if you want balanced cooling with addressable LEDs.
Pros
- Four heat pipes paired with a solid copper base
- 154 mm height provides broad chassis clearance
- PWM fan speed ranges from 690 to 1,800 RPM
- Dual-loop ARGB lighting integrated into the fan
Cons
- Mounting brackets listed only for AM5, LGA 1700, and LGA 1851
- Single-fan design rather than a dual-fan push-pull configuration
Good fit if
- You need a 154 mm tall cooler to clear your PC case.
- You want an ARGB dual-loop fan with a 690 to 1,800 RPM control range.
- You use an AMD AM5, Intel LGA 1700, or Intel LGA 1851 motherboard.
Skip if
- You need mounting hardware for older CPU socket platforms.
- You prefer an out-of-the-box dual-fan configuration.
Verdict: Cooler Master Hyper 212 Halo ARGB Cooler delivers four heat pipes, a copper base, and a 154 mm profile tailored for modern AM5 and LGA 1700/1851 setups. Its 1,800 RPM PWM fan and dual-loop lighting make it a solid fit if you want illuminated cooling.
Thermalright Assassin X 120 RGB CPU Cooler
Best for: mid-tower cases with limited cooler height clearance
- Heat Pipes
- 4 Heat Pipes
- Socket Compatibility
- AM4, AM5, LGA1700, LGA1851, LGA1200
- Cooler Height
- 148mm
- Fan Size
- 120mm
- Fan Speed
- 1550 RPM
- Lighting
- RGB
View on Amazon: Thermalright Assassin X 120 RGB CPU Cooler (paid link)
The Thermalright Assassin X 120 RGB CPU Cooler is a single-tower heatsink equipped with four 6mm heat pipes and a pure copper base. Standing at 148mm tall, it fits compact mid-tower enclosures while leaving RAM slots accessible. Its 120mm PWM fan moves up to 66.17 CFM of air at 25.6 dB(A) max noise. This cooler suits you if you want dependable everyday cooling across Intel LGA 1851 or AMD AM5 sockets.
Pros
- Pure copper base with four 6mm heat pipes
- Compact 148mm overall height fits smaller cases
- 120mm S-FDB fan outputs up to 66.17 CFM at 25.6 dB(A)
- Wide socket compatibility including Intel LGA 1851 and AMD AM5
Cons
- Fan power and RGB lighting share a single connection
- Top fan speed capped at 1550 RPM
Good fit if
- You have a mid-sized chassis that requires a cooler height under 150mm.
- You run modern desktop platforms such as AMD AM5 or Intel LGA 1851.
- You want simple RGB lighting integrated into the primary fan header.
Skip if
- You require dedicated, independent control cables for RGB lighting.
- You need high-RPM fans exceeding 1550 RPM for heavy overclocking.
Verdict: Thermalright Assassin X 120 RGB CPU Cooler delivers dependable four-pipe thermal transfer with a compact 148mm vertical clearance. It provides balanced airflow and quiet S-FDB operation across modern AMD and Intel sockets.
Thermalright Assassin Spirit 120 Dual Fan Cooler
Best for: dual-fan setups needing clear RAM space
- Heat Pipes
- 4 Heat Pipes
- Socket Compatibility
- AM4, AM5, LGA1700, 1150, 1151, 1200
- Cooler Height
- 154mm
- Fan Size
- 120mm
- Fan Speed
- 1500 RPM ± 10%
- Features
- Fan
View on Amazon: Thermalright Assassin Spirit 120 Dual Fan Cooler (paid link)
This 154 mm tall heatsink pairs four 6 mm direct-contact heat pipes with two 120 mm PWM fans featuring positive and reverse blades. You get an aluminum fin stack, copper base, and a maximum noise rating of 25.6 dB(A). It suits you if you want dual-fan cooling without memory stick obstruction on Intel LGA 1700 or AMD AM5 sockets.
Pros
- Dual 120 mm PWM fans combining standard and reverse blades
- Four 6 mm heat pipes using AGHP anti-gravity technology
- Low maximum noise rating of 25.6 dB(A) at 1500 RPM
- Heatsink design does not obstruct memory slots
Cons
- No RGB or ARGB lighting included
- Fan bearing lifespan specified at 20,000 hours
Good fit if
- You want dual PWM fans with positive and reverse blades.
- You need a 154 mm tall cooler that avoids obstructing memory sticks.
- You use an Intel LGA 1700, 1200, 115x or AMD AM4, AM5 socket.
Skip if
- You want built-in ARGB or RGB lighting on your cooler.
- You need mounting hardware for sockets outside AM4, AM5, or Intel LGA 115x/1200/1700.
Verdict: Thermalright Assassin Spirit 120 Dual Fan Cooler pairs two 120 mm PWM fans with four direct-contact heat pipes in a 154 mm tall profile. It delivers airflow up to 66.17 CFM while keeping sound levels at or below 25.6 dB(A).
Thermalright Assassin Spirit 120 Dark Air Cooler
Best for: standard mid-tower builds needing dark aesthetic cooling
- Heat Pipes
- 4 Heat Pipes
- Cooler Height
- 156mm
- Fan Size
- 120mm
- Fan Speed
- 1850 RPM
- Socket Compatibility
- AM4, AM5, LGA 1700, LGA 1200, LGA 1150, LGA 1151
- Features
- Fan
View on Amazon: Thermalright Assassin Spirit 120 Dark Air Cooler (paid link)
This single-tower cooler gives you four direct-touch copper heat pipes paired with an all-aluminum fin stack standing 156 mm tall. The included 120 mm PWM fan reaches 1,850 RPM, generating up to 70.4 CFM of airflow while keeping rated noise at or below 27 dB(A). If you run Intel LGA 1700 or AMD AM5 sockets and need focused tower cooling, this blacked-out setup fits standard desktop cases easily.
Pros
- Delivers up to 70.4 CFM airflow via a 1,850 RPM PWM fan
- Uses 4 plated heat pipes with direct-touch copper base
- Maintains a specified maximum noise level of 27 dB(A)
- Supports Intel LGA 1700, LGA 1200, LGA 115x, and AMD AM4/AM5
Cons
- Requires stock motherboard backplate for AMD installation
- Stands 156 mm tall, excluding low-profile cases
- Includes no lighting features
Good fit if
- You need 70.4 CFM maximum airflow from a 120 mm fan.
- You have a standard case with at least 156 mm cooler clearance.
- You want a fully black-painted heatsink and top cover.
Skip if
- You build in small form factor cases with limited vertical clearance.
- You require integrated RGB or ARGB fan illumination.
- You no longer have your motherboard's original AMD backplate.
Verdict: Thermalright Assassin Spirit 120 Dark Air Cooler provides four direct-touch heat pipes and a 70.4 CFM fan suited for current desktop platforms. It fits your build if you want standard tower performance without lighting extras.
Thermalright Assassin Spirit 120 EVO White ARGB
Best for: white-themed desktop builds needing balanced 120mm cooling
- Heat Pipes
- 4 Heat Pipes
- Cooler Height
- 156mm
- Fan Size
- 120mm
- Fan Speed
- 2000 RPM
- Lighting
- ARGB
- Socket Compatibility
- AM4, AM5, LGA 1700, LGA 1200, LGA 1150, LGA 1151
View on Amazon: Thermalright Assassin Spirit 120 EVO White ARGB (paid link)
This is a single-tower CPU air cooler finished in white with addressable RGB lighting. It pairs four 6mm heat pipes with an aluminum fin stack and a 120mm PWM fan reaching 2,000 RPM. The fan produces up to 68.9 CFM of airflow at 28.2 dB(A). At 156mm tall, it fits standard mid-tower cases, suiting you if you need reliable cooling for modern Intel or AMD sockets in an all-white build.
Pros
- Four 6mm heat pipes paired with an aluminum fin tower
- Up to 68.9 CFM airflow at 2,000 RPM maximum speed
- 5V 3-pin ARGB header support for lighting control
- Moderate 156mm height fits many standard desktop cases
Cons
- Requires original motherboard backplate for AMD AM4 and AM5 setups
- Peak noise reaches 28.2 dB(A) at maximum fan speed
Good fit if
- You want an all-white 120mm tower cooler with ARGB lighting.
- You need a 4-heat-pipe cooler that delivers up to 68.9 CFM airflow.
- You build in a chassis with at least 156mm of CPU cooler clearance.
Skip if
- You do not have the stock motherboard backplate for AM4 or AM5.
- You prefer a non-illuminated, stealth black or unlit aesthetic.
- You need an ultra-low-profile cooler for a compact mini-ITX case.
Verdict: Thermalright Assassin Spirit 120 EVO White ARGB provides solid four-pipe cooling performance with 68.9 CFM airflow for builders assembling an all-white system. Its 156mm height and universal socket brackets make it a straightforward choice for mainstream Intel and AMD processors.
Specifications side by side
| Spec | Cooler Master MasterAir MA410M ARGB Air Cooler | Cooler Master Hyper 212 Black CPU Cooler | ID-COOLING 45mm Low-Profile CPU Cooler | Thermalright 53mm Low-Profile CPU Cooler | ARCTIC Freezer i35 A-RGB CPU Cooler | Thermalright Assassin X120 120mm Air Cooler | Jonsbo Compact White RGB CPU Cooler | ARCTIC Freezer 36 Dual Fan CPU Cooler | ID-COOLING 120mm Black CPU Air Cooler | Cooler Master Hyper 212 Spectrum V3 ARGB Cooler | Cooler Master Hyper 212 Halo ARGB Cooler | Thermalright Assassin X 120 RGB CPU Cooler | Thermalright Assassin Spirit 120 Dual Fan Cooler | Thermalright Assassin Spirit 120 Dark Air Cooler | Thermalright Assassin Spirit 120 EVO White ARGB |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Socket Compatibility | AM4, LGA1200, LGA1151 | AM5, LGA 1851, LGA 1700 | not specified | AM4, AM5, LGA115x, LGA1200, LGA1851 | Intel 1700, 1200, 115X | AM4, AM5, LGA1700, LGA1851, LGA1200 | LGA 1700/1200/115X, AM4/AM3/AM2/FM2 | LGA1851, LGA1700 | not specified | AM5, LGA 1851, LGA 1700 | AM5, LGA 1700, LGA 1851 | AM4, AM5, LGA1700, LGA1851, LGA1200 | AM4, AM5, LGA1700, 1150, 1151, 1200 | not specified | not specified |
| Cooler Height | not specified | 152mm | 45mm | 53mm | not specified | 148 mm | not specified | not specified | not specified | 152 mm | 154mm | 148mm | 154mm | 156mm | 156mm |
| Heat Pipes | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Tower Design | not specified | not specified | Low-Profile | Low-Profile | Single-Tower | not specified | not specified | Single-Tower | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Fan Size | not specified | not specified | 92mm | 90mm | 120 mm | 120 mm | 92mm | 120 mm | 120mm | 120mm | not specified | 120mm | 120mm | 120mm | 120mm |
| Fan Speed | not specified | 2,500 RPM | not specified | not specified | 1700 RPM | 1550 RPM | 2300 RPM | 1800 RPM | not specified | 650 to 1,750 RPM | 1,800 RPM | 1550 RPM | 1500 RPM ± 10% | 1850 RPM | 2000 RPM |
| Lighting | ARGB | not specified | not specified | not specified | A-RGB | not specified | RGB | not specified | not specified | ARGB | ARGB | RGB | not specified | not specified | ARGB |
| Color | MA410M ARGB | Black | black | Black | Black | not specified | White | grey | Black | Silver | White | not specified | not specified | not specified | White |
| Material | Copper, Aluminum | not specified | not specified | not specified | not specified | Aluminum | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Features | not specified | Fan | Fan | Fan | Fan | Fan | Fan | not specified | Fan | not specified | Fan | Fan | Fan | Fan | Fan |
| Dimensions | 6.5 × 9.1 × 6.1 inches | 4.7 × 3.1 × 6.3 inches | 3.62 × 0.59 × 3.62 inches | 3.7 × 3.74 × 1.5 inches | 3.58 × 5.24 × 6.24 inches | 4.72 × 2.8 × 5.83 inches | 3.66 × 3.07 × 4.96 inches | 4.09 × 4.96 × 6.25 inches | 4.72 × 4.72 × 5.94 inches | 4.88 × 2.87 × 5.98 inches | 4.88 × 2.87 × 6.06 inches | 4.92 × 2.8 × 5.83 inches | 4.72 × 3.86 × 6.06 inches | 2.87 × 6.14 × 4.72 inches | 4.72 × 2.87 × 6.14 inches |
| Weight | 2.5 pounds | 1.54 pounds | 11.2 ounces | 1 pounds | 1.62 pounds | 1.42 pounds | not specified | 1.94 pounds | 1 pounds | 1.43 pounds | 1.52 pounds | 3.53 ounces | not specified | not specified | not specified |
| Size | 4 HeatPipes | 4 Heat Pipes | 101x94x45mm | Height 53mm | Freezer i35 A-RGB | not specified | CR1400 White | Freezer 36 | SE-224-XTS BLACK | 124 x 73 x 152 mm | 212Halo | not specified | not specified | not specified | not specified |
| Model | MAM-T4PN-218PC-R1 | MAX-T4PN-217PK-R2 | IS-40X | AXP90 X53 BLACK | ACFRE00104A | AX120 Refined SE | CR1400 | ACFRE00121A | SE-224-XTS BLACK | RR-S4NA-17PA-R1 | RR-S4WW-20PA-R1 | AX120 SE V2 | AS120 V2 PLUS | AS120 EVO DARK | AS120 EVO WHITE ARGB |
Is a 4 Heat Pipe Cooler Worth It?
A four heat pipe design provides direct thermal transfer from your processor into an aluminum fin stack using copper pipes. This layout handles standard desktop cooling across mainstream AM4, AM5, and Intel LGA sockets without requiring bulky dual-tower heatsinks. The compact footprint helps preserve clearance around your memory slots and motherboard components. In daily operation, pairing four heat pipes with 90mm or 120mm PWM fans delivers steady airflow while fitting cases that cannot accommodate oversized cooling hardware.
Worth it if
- You want balanced cooling for mainstream AM4, AM5, or Intel LGA platforms without filling your entire chassis.
- You need a compact single-tower or low-profile cooler that preserves space around your memory slots.
Skip it if
- You need a dual-tower cooling configuration or a design with more than four heat pipes.
- You use a processor socket omitted from the specific cooler mounting bracket specifications.
If you select a cooler master PC case for your build, compare its CPU clearance specification against the total cooler height.
How We Picked Four-Pipe Coolers
To build this guide of 15 coolers, we identified Amazon listings specifying four heat pipes within their title or feature bullets. You see only one size or variant per product family to prevent redundant options. Every listed detail comes directly from published specifications, with no physical handling of the hardware.
We list products in stock first so you can view available hardware immediately. Key published specifications such as cooler height, socket compatibility, and fan dimensions help you evaluate clearance and motherboard fit for your system. Real-time stock status updates on the page throughout the day.
Selecting the Best Four Heatpipe Cooler
-
Fan Configuration and Airflow
Fan setups affect how air travels across the cooling fins. A single-fan heatsink handles everyday desktop processing with a compact profile. A dual-fan push-pull configuration pulls intake air through the fin stack and pushes warm air toward your case exhaust. If you choose a dual-fan model like the Thermalright Assassin Spirit 120 Dual Fan Cooler, check for published airflow figures such as 66.17 CFM and noise ratings like 25.6 dB(A). Dual fans provide higher airflow through dense fins at moderate rotational speeds.
-
Fan Size and Speed
Examine the fan diameter and rated rotational speed listed on the specification sheet. Standard towers use 120mm fans, whereas low-profile or compact coolers rely on 90mm or 92mm fans. Smaller fans must spin faster to move adequate volume through the heatsink. If you select the Cooler Master Hyper 212 Black CPU Cooler, you receive a 120mm fan capable of 2,500 RPM PWM operation. Look at your chassis airflow needs and match fan RPM capabilities to your desired balance of airflow and operating sound.
-
Memory Slot Clearance
Tall memory heat spreaders can interfere with cooler fan clips or the fin stack itself. Symmetrical single-tower designs sometimes overhang the nearest DIMM slot on compact motherboards. Look for heatsinks engineered with offset heat pipes or recessed fins that preserve socket clearance. The ID-COOLING 120mm Black CPU Air Cooler features a footprint specifically shaped to clear memory slots without blocking your RAM sticks. Verify your module height against the cooler width and base offset before mounting hardware over populated motherboard slots.
-
Dedicated Versus Multi-Platform Sockets
Review the exact socket compatibility list rather than assuming universal mounting hardware is in the box. Some coolers use universal brackets supporting modern platforms such as AM4, AM5, LGA 1700, and LGA 1851. Other models target a single manufacturer line. For example, the ARCTIC Freezer i35 A-RGB CPU Cooler delivers dedicated Intel socket cooling without AMD hardware included. Confirm your motherboard socket matches the exact socket designations listed in the technical attributes to avoid purchasing an incompatible mounting kit.
-
Lighting and Cable Requirements
Check whether you need addressable lighting connections or a clean non-illuminated profile. Addressable RGB fans require a 3-pin 5V header on your motherboard, while basic RGB models rely on 12V connections. Connecting to the wrong header damages lighting LEDs. If your build does not require lighting hardware or extra cable routing, choose an unlit option like the Thermalright Assassin Spirit 120 Dark Air Cooler. This model delivers 70.4 CFM fan airflow through dark fins without extra lighting leads to manage.
-
Color and Exterior Finish
Cooler manufacturers offer distinct colorways to align with your overall chassis theme. Anodized black models integrate into stealthy builds, silver aluminum fins match classic configurations, and pure white finishes complement bright interiors. The Cooler Master Hyper 212 Halo ARGB Cooler provides an all-white heatsink, white fan frame, and dual-loop illumination for white-themed AM5 or LGA 1700 systems. Check the finish specifications on both the fin stack and the fan frame to ensure visual consistency across your build.
Frequently asked questions
Which 4-heatpipe coolers include addressable RGB lighting?
Several 4-heatpipe options incorporate integrated lighting hardware for visual customization. You can choose ARGB models like the Cooler Master MasterAir MA410M, Cooler Master Hyper 212 Spectrum V3, Cooler Master Hyper 212 Halo, or Thermalright Assassin Spirit 120 EVO White. If you prefer standard RGB, the ARCTIC Freezer i35 A-RGB, Thermalright Assassin X 120 RGB, and Jonsbo CR1400 provide illuminated operation across their respective platforms.
Are 4-heatpipe CPU coolers compatible with Intel LGA 1700 sockets?
Yes, many four-pipe coolers support Intel LGA 1700 motherboards directly. Models such as the Thermalright Assassin X 120 RGB, Assassin Spirit 120 Dual Fan, and Assassin Spirit 120 EVO White explicitly list LGA 1700 support. The Cooler Master Hyper 212 Black and Hyper 212 Spectrum V3 also accommodate LGA 1700 configurations alongside LGA 1851 sockets. Always confirm socket specifications before installation.
How much airflow do 4-heatpipe tower coolers provide?
Published airflow ratings for standard 120mm four-pipe towers commonly reach between 66 and 70 CFM. For example, the Thermalright Assassin Spirit 120 Dual Fan provides up to 66.17 CFM across its twin fans. The single-fan Thermalright Assassin Spirit 120 EVO White delivers 68.9 CFM, while the Thermalright Assassin Spirit 120 Dark outputs up to 70.4 CFM through its fin stack.
Can you find white 4-heatpipe CPU coolers for color-matched builds?
Yes, multiple four-pipe models feature dedicated white finishes. The Jonsbo CR1400 White RGB cooler provides a compact sub-5-inch tower finished in white. For standard 120mm tower layouts, the Cooler Master Hyper 212 Halo ARGB and Thermalright Assassin Spirit 120 EVO White both use white styling while supplying four heat pipes for thermal transfer across contemporary AMD and Intel sockets.
Which 4-heatpipe coolers feature low-profile designs for compact cases?
The ID-COOLING IS-40X and Thermalright AXP90-X53 provide low-profile designs utilizing four heat pipes. The ID-COOLING unit measures 45mm in total height, fitting restricted Mini-ITX cases. The Thermalright 53mm model employs four 6mm heat pipes paired with a 90mm PWM fan. Both options keep cooler height significantly below standard vertical tower heatsinks to ensure fitment in narrow small-form-factor enclosures.
What fan speeds do 4-heatpipe tower coolers typically use?
Fan speeds on four-heatpipe models vary based on heatsink configuration and fan diameter. For instance, the Cooler Master Hyper 212 Black uses a PWM fan operating up to 2,500 RPM for active cooling across its fin stack. In contrast, the Cooler Master Hyper 212 Halo utilizes a 1,800 RPM PWM fan, balancing air movement through its four copper heat pipes.
Which 4-heatpipe coolers include push-pull dual fans out of the box?
Several models ship with two fans configured for push-pull airflow. The Cooler Master MasterAir MA410M uses dual fans across its Continuous Direct Contact base. The ARCTIC Freezer 36 Dual Fan includes push-pull fans paired with four offset heat pipes and an Intel contact frame. Additionally, the Thermalright Assassin Spirit 120 Dual Fan employs two 120mm PWM fans producing up to 66.17 CFM.