15 Best CPU Coolers for LGA 1150, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the right CPU cooler for LGA 1150 depends on your chassis clearance and processor requirements. We compared 15 products based strictly on the specifications published on their official listings. The Thermaltake Gravity i2 92mm CPU Cooler leads the rankings because its aluminum heatsink and PWM fan control deliver dependable thermal management inside compact spaces.
Our breakdown contrasts low-profile heatsinks with dual-tower designs across dimensions, materials, and heat-pipe configurations. This guide helps you decide which cooler matches your case clearance, hardware layout, and cooling requirements.
Quick picks
The best fit for you
- You need a stock cooler replacement for LGA 1150 Thermaltake Gravity i2 92mm CPU Cooler An aluminum top-down heatsink with PWM fan control delivers basic thermal management in compact spaces.
- You build inside an ultra-slim small form factor case SilverStone 80mm Low-Profile CPU Cooler A 23mm total height and copper base fit enclosures with strict vertical clearance limits.
- You want heavy-duty dual-tower cooling in a standard case Thermalright Peerless Assassin 120 Dual Fan Cooler Six copper heat pipes paired with dual 120mm fans provide cooling across twin fin stacks.
- You want high airflow cooling for a white chassis Thermalright Peerless Assassin 120 White ARGB Cooler The white finish combines with dual 120mm ARGB fans and six heat pipes for desktop cases.
Our 15 picks
Thermaltake Gravity i2 92mm CPU Cooler
Best for: compact Intel LGA 1150 stock cooler replacements
- Socket Compatibility
- LGA 1200, LGA 1150, LGA 1151
- Tower Design
- Low-profile
- Fan Size
- 92mm
- Material
- Aluminum
- Features
- Fan
- Dimensions
- 3.7 × 2.4 × 3.7 inches
View on Amazon: Thermaltake Gravity i2 92mm CPU Cooler (paid link)
The Thermaltake Gravity i2 92mm CPU Cooler provides basic top-flow cooling for your Intel LGA 1150 setup. It features an aluminum extrusion heatsink paired with a seven-bladed 92mm fan. A four-pin PWM connector allows your motherboard to regulate fan speeds according to CPU demand. With a compact footprint measuring 3.7 inches long and 2.4 inches wide, you get a direct drop-in replacement suited for standard LGA 1150 desktop processors.
Pros
- 4-pin PWM connector for motherboard speed control
- Compact 3.7-inch by 2.4-inch footprint
- 7-bladed 92mm fan design
- Direct fit for LGA 1150, 1151, 1155, 1156, and 1200 sockets
Cons
- Solid aluminum extrusion without copper heat pipes
- Lacks mounting hardware for AMD sockets
Good fit if
- You need a compact replacement cooler for an Intel LGA 1150 socket.
- You want 4-pin PWM motherboard control over fan speeds.
Skip if
- You need heat pipes for higher thermal dissipation.
- You run an AMD processor configuration.
Verdict: Thermaltake Gravity i2 92mm CPU Cooler delivers an aluminum top-down heatsink with PWM fan control for Intel LGA 1150 builds. It fits compact chassis spaces where basic thermal management is required.
SilverStone 80mm Low-Profile CPU Cooler
Best for: ultra-slim LGA 1150 and 1156 enclosures
- Socket Compatibility
- LGA 1150, LGA 1156
- Cooler Height
- 23mm
- Tower Design
- Low Profile
- Fan Size
- 80mm
- Dimensions
- 4 × 4 × 3 inches
- Weight
- 8 ounces
View on Amazon: SilverStone 80mm Low-Profile CPU Cooler (paid link)
This SilverStone unit is an ultra-compact air cooler built for Intel LGA 1150, LGA 1155, and LGA 1156 sockets. It stands 23mm tall, making it suitable if you work inside extremely space-restricted enclosures. The cooler pairs a copper center and base with extruded aluminum fins. Its custom 80mm PWM fan generates 28.1 CFM of airflow at a 26.0 decibel noise rating, giving you targeted cooling in low-profile desktop builds.
Pros
- Vertical clearance height of 23mm
- Copper center and base with extruded aluminum fins
- PWM-controlled 80mm fan with 26.0 dB noise rating
- Lightweight construction at 0.5 pounds
Cons
- Airflow output tops out at 28.1 CFM
- Uses an 80mm fan rather than a larger 92mm or 120mm size
- Socket support limited to Intel LGA 1156, LGA 1155, and LGA 1150
Good fit if
- You need a cooler under 25mm tall for an ultra-slim chassis.
- You use an Intel LGA 1150 or LGA 1156 motherboard.
- You want automated fan speed regulation via PWM control.
Skip if
- You require airflow rates higher than 28.1 CFM.
- You need mounting hardware for sockets outside the Intel LGA 115X family.
Verdict: SilverStone 80mm Low-Profile CPU Cooler provides a 23mm total height and copper-base thermal transfer for tight LGA 1150 and LGA 1156 builds. It is a dedicated solution when vertical clearance prevents the use of standard air coolers.
Thermaltake Gravity i2 92mm Intel CPU Cooler
Best for: low-power Intel LGA 1150 desktop processors
- Socket Compatibility
- LGA 1200, LGA 1150, LGA 1151
- Tower Design
- Low Profile
- Fan Size
- 92mm
- TDP Rating
- 95W
- System Type
- Desktop
- Dimensions
- 4.25 × 4.25 × 4 inches
View on Amazon: Thermaltake Gravity i2 92mm Intel CPU Cooler (paid link)
The Thermaltake Gravity i2 92mm CPU Cooler is a low-profile desktop air cooler engineered for Intel LGA 1150 and related sockets. It pairs a 92mm 7-bladed fan delivering up to 31.343 CFM of airflow with an acoustic rating of 21.3 decibels. Designed for CPUs up to 95W, this compact 4-inch-tall unit suits you if you need a straightforward stock replacement to manage lower-power processors inside space-constrained desktop builds.
Pros
- Low-profile 4-inch height fits compact desktop enclosures
- Rated to support processors up to 95W
- Generates 31.343 CFM airflow at 21.3 decibels
- Backed by a 2-year warranty
Cons
- Supports only select Intel sockets and lacks AMD mounting hardware
- Rated limit of 95W restricts use with higher-power processors
Good fit if
- You run an Intel LGA 1150 processor rated at 95W or below.
- You need a low-profile cooler with a 4-inch maximum height clearance.
Skip if
- You operate a processor requiring cooling dissipation above 95W.
- You need mounting hardware for an AMD socket.
Verdict: Thermaltake Gravity i2 92mm CPU Cooler provides basic low-profile cooling with 31.343 CFM airflow for 95W Intel LGA 1150 processors. It gives you a compact 4-inch cooling footprint backed by a 2-year warranty.
JIUWU 92mm 4-Heatpipe Blue LED Cooler
Best for: compact LGA 1150 and LGA 775 builds
- Socket Compatibility
- LGA 1150, LGA 1151, LGA 775
- Heat Pipes
- 4
- Fan Size
- 92mm
- Fan Speed
- 1800 RPM
- Lighting
- Blue LED
- System Type
- Desktop
View on Amazon: JIUWU 92mm 4-Heatpipe Blue LED Cooler (paid link)
The JIUWU 92mm 4-Heatpipe Blue LED Cooler gives you a compact air cooling setup for your LGA 1150 socket. It combines four direct-contact heat pipes with a 92mm hydraulic bearing fan operating up to 1800 RPM. Measuring 1.02 inches high, it fits into small desktop chassis layouts. This unit suits you if you want steady cooling for LGA 1150 or legacy systems like LGA 775 with integrated blue illumination.
Pros
- Four direct-contact heat pipes for heat dissipation
- Compact 1.02-inch height fits small chassis enclosures
- Broad socket coverage including LGA 1150 and LGA 775
- Hydraulic bearing fan rated up to 1800 RPM
Cons
- Uses a 3-pin connector instead of 4-pin PWM control
- Fixed blue LED lighting cannot be changed or turned off
Good fit if
- You need a low-height cooler for a compact desktop case.
- You are building or maintaining an LGA 775 or LGA 1150 motherboard.
- You prefer built-in blue LED lighting.
Skip if
- You require 4-pin PWM automatic fan speed adjustments.
- You want customizable RGB lighting or an unlit fan.
Verdict: JIUWU 92mm 4-Heatpipe Blue LED Cooler delivers four direct-contact heat pipes within an ultra-slim 1.02-inch footprint. It is a practical choice if you need dedicated cooling across legacy LGA 775 and LGA 1150 systems.
Toptekits Copper Core Low-Profile Cooler
Best for: ultra-compact 1U and HTPC builds
- Socket Compatibility
- LGA 1150, LGA 1151
- Cooler Height
- 27mm
- Tower Design
- Low-Profile
- Fan Size
- 80mm
- Fan Speed
- 2700 RPM ± 10%
- Material
- Copper
View on Amazon: Toptekits Copper Core Low-Profile Cooler (paid link)
This Toptekits unit is a low-profile air cooler designed for Intel LGA 1150 sockets and compact systems. It features a copper core heatsink measuring 90 by 17 mm paired with an 80 mm slim fan. At 27 mm in total height, it clears restrictive enclosures like 1U server racks and HTPC cases. Running at 2700 RPM via a 3-pin connector, it suits your ultra-compact desktop builds.
Pros
- Low 27 mm total height fits 1U server chassis and slim HTPC enclosures
- Copper core heatsink construction for direct thermal conductivity
- Pre-pasted thermal compound included from the factory
- Compact 80 mm fan rated at 23±3 dBA noise level
Cons
- Uses a 3-pin power connector without 4-pin PWM speed regulation
- Fixed 2700 RPM fan speed runs faster than standard desktop fans
Good fit if
- You build in an ultra-slim chassis or 1U server needing 27 mm clearance.
- You want pre-applied thermal paste for a direct LGA 1150 installation.
Skip if
- You need a 4-pin PWM header for motherboard-controlled fan curves.
- You have clearance for larger 92 mm or 120 mm tower coolers.
Verdict: Toptekits Copper Core Low-Profile Cooler delivers a compact 27 mm profile and copper core heatsink for space-constrained LGA 1150 setups. It serves slim enclosures well if you do not require 4-pin PWM fan control.
Thermalright Peerless Assassin 120 Dual Fan Cooler
Best for: dual-tower cooling with generous case clearance
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1700, LGA 1200, LGA 1150, LGA 1151
- Cooler Height
- 157mm
- Heat Pipes
- 6
- Tower Design
- Double tower
- Fan Size
- 120mm
- Fan Speed
- 1550rpm±10%
View on Amazon: Thermalright Peerless Assassin 120 Dual Fan Cooler (paid link)
The Thermalright Peerless Assassin 120 is a dual-tower air cooler built for socket LGA 1150 and other platforms. It uses six 6mm copper heat pipes paired with a copper base and an aluminum fin stack. Two 120mm PWM fans push up to 66.17 CFM of airflow at noise levels under 25.6 dB(A). It suits you if you need dual-fan cooling capacity and have 157mm of cooler height clearance.
Pros
- Six 6mm copper heat pipes using AGHP technology
- Dual 120mm PWM fans delivering up to 66.17 CFM airflow
- Maximum noise level rated at or below 25.6 dB(A)
- Pure copper base with full electroplating reflow welding
Cons
- Height of 157mm requires substantial enclosure depth
- Dual-tower assembly measures 135mm wide
Good fit if
- You have a PC chassis with at least 157mm of CPU cooler height clearance.
- You want two 120mm PWM fans to move airflow through a dual-tower heatsink.
Skip if
- You are building in a slim or low-profile enclosure.
- You prefer a single-tower heatsink for a smaller overall footprint.
Verdict: Thermalright Peerless Assassin 120 Dual-Tower Cooler delivers dual-fan airflow across six copper heat pipes for LGA 1150 setups. It is an effective solution whenever your case provides the required 157mm clearance.
Thermalright 47mm Low-Profile CPU Cooler
Best for: compact ITX builds with strict clearance limits
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1200, LGA 1150, LGA 1151
- Cooler Height
- 47mm
- Heat Pipes
- 4
- Tower Design
- Low-Profile
- Fan Size
- 92mm
- System Type
- ITX
View on Amazon: Thermalright 47mm Low-Profile CPU Cooler (paid link)
This Thermalright cooler is a compact low-profile option designed for space-constrained ITX systems. It stands 47mm tall and mounts directly to your LGA 1150 motherboard using an all-metal backplate fastener. Four 6mm heatpipes transfer heat through secondary reflow soldering, paired with a slim 92mm PWM fan rated at 22.4 dBA or lower. It suits you if you need reliable cooling inside a small form factor enclosure.
Pros
- Compact 47mm total height fits tight ITX enclosures
- Four 6mm heatpipes with secondary reflow soldering
- Low maximum fan noise rating of 22.4 dBA
- All-metal mounting hardware with backplate fastener
Cons
- Uses a smaller 92mm slim fan instead of a full-size 120mm fan
- Smaller heatsink surface area than standard tower coolers
Good fit if
- You build in a small form factor case with tight vertical clearance.
- You want quiet operation with sound levels rated at or below 22.4 dBA.
Skip if
- You have adequate space for a full-size 120mm tower heatsink.
- You require integrated RGB lighting elements on your cooler.
Verdict: Thermalright 47mm Low-Profile CPU Cooler delivers quiet, compact cooling for LGA 1150 processors in slim ITX cases. Its 47mm profile and four heatpipes handle thermal loads where standard tower coolers cannot fit.
Thermalright AXP90 36mm Low-Profile Cooler
Best for: Ultra-compact ITX builds needing LGA 1150 support
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1200, LGA 1150, LGA 1151
- Cooler Height
- 36mm
- Heat Pipes
- 4
- Tower Design
- Low-Profile
- System Type
- ITX
- Features
- Fan
View on Amazon: Thermalright AXP90 36mm Low-Profile Cooler (paid link)
Thermalright designed this low-profile cooler for compact ITX builds using LGA 1150 motherboards. At 36mm in total height, it clears tight spaces where standard coolers cannot fit. You get four 6mm heatpipes, a nickel-plated finish, and a slim 92mm PWM fan rated at 22.4 dBA or lower. It suits you if you need quiet cooling inside an ultra-small PC chassis.
Pros
- Total height measures 36mm for small-form-factor clearance
- Four 6mm AGHP heatpipes with nickel-plated finish
- TL-9015 slim PWM fan operates at 22.4 dBA or quieter
- Includes metal backplate mounting hardware
Cons
- Smaller heatsink area than full-size tower coolers
- Uses a 92mm slim fan rather than a standard 120mm fan
Good fit if
- You build inside an ITX case with strict clearance limits.
- You want a low-profile cooler with four dedicated 6mm heatpipes.
- You need LGA 1150 socket compatibility with a metal backplate.
Skip if
- You have space for a 120mm tower cooler.
- You prefer integrated RGB lighting on your cooler.
Verdict: Thermalright 36mm Low-Profile CPU Cooler delivers four heatpipes and a slim PWM fan inside a 36mm profile. It gives your compact LGA 1150 system solid cooling without vertical clearance issues.
Thermalright 53mm Low-Profile CPU Cooler
Best for: compact LGA 1150 Mini-ITX builds
- Socket Compatibility
- AM4, LGA 1851, LGA 1200, LGA 1150, LGA 1151
- Cooler Height
- 53mm
- Heat Pipes
- 4
- Tower Design
- Low-Profile
- Fan Size
- 90mm
- Color
- Black
View on Amazon: Thermalright 53mm Low-Profile CPU Cooler (paid link)
This Thermalright cooler is a compact heatsink designed for small enclosures. It fits your LGA 1150 socket using an all-metal backplate mounting system. The unit stands 53mm tall and uses four 6mm heat pipes paired with a 90mm PWM slim fan rated at 22.4 dBA maximum noise. It suits you if you need reliable processor cooling inside a tight Mini-ITX or low-clearance chassis.
Pros
- Compact 53mm total height fits small form factor cases
- Four 6mm heat pipes with secondary reflow soldering
- Low-noise 90mm PWM fan rated at 22.4 dBA or less
- All-metal mounting hardware with backplate fastener
Cons
- Smaller 90mm fan surface area than standard 120mm designs
- No integrated RGB lighting features
Good fit if
- You have a small case requiring a cooler height under 55mm.
- You want an all-metal backplate mounting setup on LGA 1150.
- You prioritize quiet operation with noise levels at or below 22.4 dBA.
Skip if
- You have space in your case for a full-size 120mm tower cooler.
- You want integrated RGB lighting effects on your heatsink fan.
Verdict: Thermalright 53mm Low-Profile CPU Cooler delivers four-heatpipe cooling and quiet operation in a tight 53mm form factor. It gives your LGA 1150 processor solid thermal management when case clearance is strictly limited.
Thermalright Dual Tower 5-Heatpipe CPU Cooler
Best for: high-wattage LGA 1150 builds with wide cases
- Socket Compatibility
- AM4, AM5, LGA 1200, LGA 1150, LGA 1151
- Cooler Height
- 160 mm
- Heat Pipes
- 5
- Tower Design
- Dual-Tower
- Fan Size
- 120 mm, 140 mm
- TDP Rating
- 275 W
View on Amazon: Thermalright Dual Tower 5-Heatpipe CPU Cooler (paid link)
This dual-tower aluminum cooler features five 8mm heat pipes and supports Intel LGA 1150 sockets with a 275W TDP rating. It uses two PWM fans—one 120mm and one 140mm—delivering up to 95.5 CFM of airflow at 30.2 dB(A). Standing 160mm tall, it provides clearance for memory modules up to 62mm. It suits you if you need heavy-duty cooling capacity for demanding LGA 1150 builds.
Pros
- Rated for up to 275W TDP cooling capacity
- Five 8mm heat pipes with AGHP technology
- Includes two PWM fans with airflow up to 95.5 CFM
- Supports memory modules up to 62mm in height
Cons
- Tall 160mm height requires a wide PC chassis
- No integrated RGB or LED lighting
Good fit if
- You have a PC chassis wider than 210mm to clear the 160mm height.
- You run high-wattage LGA 1150 workloads needing up to 275W TDP capacity.
- You use tall memory modules up to 62mm in height.
Skip if
- You build inside a compact or slim low-profile case.
- You want integrated ARGB or LED lighting on the fans.
Verdict: Thermalright Dual Tower CPU Air Cooler delivers 275W TDP dissipation via five 8mm heat pipes and dual PWM fans. It is a solid choice when your LGA 1150 system has the chassis depth to house a 160mm heatsink.
Thermalright Peerless Assassin Dual Tower Air Cooler
Best for: full-sized LGA 1150 dual-tower airflow builds
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1700, LGA 1200, LGA 1150, LGA 1151
- Cooler Height
- 155 mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
View on Amazon: Thermalright Peerless Assassin Dual Tower Air Cooler (paid link)
This is a dual-tower heatsink paired with two 120mm PWM fans designed for sockets including LGA 1150. It features six 6mm copper heat pipes and delivers up to 66.17 CFM of airflow per fan while keeping noise below 25.6 dB(A). At 155mm tall, it fits standard mid-tower cases and suits you if you need substantial air cooling capacity.
Pros
- Dual-tower heatsink with six 6mm copper heat pipes
- Two 120mm PWM fans reaching up to 66.17 CFM airflow
- Low maximum fan noise rating of 25.6 dB(A)
- Wide compatibility covering LGA 1150, 1200, 1700, AM4, and AM5
Cons
- Height of 155mm requires sufficient chassis clearance
- Large dual-tower footprint weighs roughly 2 pounds
- Does not include an AMD backplate in the box
Good fit if
- You have at least 155mm of CPU cooler clearance inside your case.
- You want dual 120mm PWM fans with high maximum airflow.
- You need six heat pipes to cool your LGA 1150 processor.
Skip if
- You are assembling a low-profile or small-form-factor build.
- You prefer a lighter, single-tower cooling setup.
Verdict: Thermalright Peerless Assassin Dual-Tower Cooler provides strong thermal transfer via twin fin stacks and dual 120mm fans. It is a dependable choice for LGA 1150 motherboards installed in standard towers.
Thermalright Assassin X120 120mm Air Cooler
Best for: Mid-tower LGA 1150 setups seeking quiet cooling
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1200, LGA 1150, LGA 1151
- Cooler Height
- 148 mm
- Heat Pipes
- 4
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
- Material
- Aluminum
View on Amazon: Thermalright Assassin X120 120mm Air Cooler (paid link)
This single-tower cooler pairs four 6mm heat pipes with a 120mm PWM fan to handle your LGA 1150 processor. At 148mm tall, it fits mid-sized cases easily while pushing up to 66.17 CFM of airflow. The included fan runs at up to 1550 RPM while keeping noise at or below 25.6 dB(A). It suits you if you want dependable tower cooling without clearance headaches.
Pros
- Four 6mm heat pipes with anti-gravity orientation design
- 120mm PWM fan delivers up to 66.17 CFM of airflow
- Compact 148mm height fits standard mid-tower cases
- Maximum rated fan noise stays at or below 25.6 dB(A)
Cons
- No built-in RGB or ARGB lighting
- Single-fan design offers less total airflow than dual-fan coolers
Good fit if
- You need a tower cooler that clears chassis limits with its 148mm height.
- You want a standard 120mm PWM fan that caps noise at 25.6 dB(A).
- You run an Intel LGA 1150 motherboard and need metal mounting brackets.
Skip if
- You require an ultra-compact low-profile cooler for a slim mini-ITX enclosure.
- You want integrated lighting or colored fans out of the box.
Verdict: Thermalright Assassin 120mm CPU Cooler delivers balanced airflow and moderate 148mm height for LGA 1150 builds without adding fan lighting.
Thermalright Peerless Assassin 120 White ARGB Cooler
Best for: white-themed LGA 1150 desktop PC builds
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1700, LGA 1150, LGA 1151
- Cooler Height
- 155 mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
View on Amazon: Thermalright Peerless Assassin 120 White ARGB Cooler (paid link)
This dual-tower white CPU cooler pairs six 6mm copper heat pipes with two 120mm PWM fans to handle your LGA 1150 processor. It stands 155mm tall and produces up to 66.17 CFM of airflow with rated noise levels staying at or below 25.6 dB(A). It suits you if you want high airflow and integrated ARGB lighting for an all-white desktop build.
Pros
- Six 6mm pure copper heat pipes with a copper base
- Dual 120mm PWM fans moving up to 66.17 CFM
- Maximum rated fan noise of 25.6 dB(A)
- All-white design with integrated ARGB lighting
Cons
- Total height of 155mm requires a chassis with sufficient cooler clearance
- Dual-tower 135mm width occupies substantial motherboard space
Good fit if
- You need an LGA 1150 cooler that matches a white chassis theme.
- You want dual 120mm PWM fans with customizable ARGB lighting.
- You have a PC case that accommodates coolers at least 155mm tall.
Skip if
- You build in a compact low-profile or small-form-factor case.
- You prefer a plain heatsink without lighting or extra fan cabling.
Verdict: Thermalright Peerless Assassin White ARGB CPU Cooler delivers high-volume airflow across dual fin stacks via two 120mm fans. It gives your LGA 1150 system robust cooling and a clean white aesthetic.
Thermalright Assassin X 120 ARGB Cooler
Best for: mid-tower LGA 1150 builds wanting ARGB lighting
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1200, LGA 1150, LGA 1151
- Cooler Height
- 148 mm
- Heat Pipes
- 4
- Tower Design
- Single-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
View on Amazon: Thermalright Assassin X 120 ARGB Cooler (paid link)
This single-tower CPU air cooler supports Intel LGA 1150 motherboards and stands 148 mm tall, making it suitable for medium-sized computer cases. It features four 6 mm copper heat pipes, a copper base, and an aluminum heatsink. A 120 mm PWM fan delivers up to 66.17 CFM of airflow at noise levels up to 25.6 dB(A). It fits you well if you want addressable RGB lighting and standard tower cooling for your build.
Pros
- Compact 148 mm height fits medium-sized computer cases
- Four 6 mm copper heat pipes with AGHP technology
- Includes 120 mm PWM fan moving up to 66.17 CFM
- Operating noise level rated at 25.6 dB(A) or lower
- Integrated ARGB lighting effects
Cons
- 148 mm height is too tall for slim ITX chassis
- Includes a single fan rather than a dual-fan setup
- Features four heat pipes instead of six
Good fit if
- You need a cooler that fits cases with at least 148 mm of vertical clearance.
- You want customizable ARGB lighting alongside standard 4-pin PWM control.
- You use an LGA 1150 board but want compatibility with LGA 1700, AM4, or AM5.
Skip if
- You require a low-profile cooler under 148 mm for a compact ITX case.
- You want a dual-tower heatsink with two fans for heavier cooling loads.
Verdict: Thermalright Assassin X 120 ARGB CPU Cooler pairs a 148 mm single-tower profile with four heat pipes and a 120 mm ARGB fan. It provides reliable LGA 1150 socket compatibility and illuminated airflow without the bulk of a dual-tower cooler.
Thermalright Burst Assassin 120 ARGB
Best for: LGA 1150 single-tower cooling with ARGB
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1700, LGA 1200, LGA 1150, LGA 1151
- Cooler Height
- 154 mm
- Heat Pipes
- 6
- Tower Design
- Single-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
View on Amazon: Thermalright Burst Assassin 120 ARGB (paid link)
This Thermalright Burst Assassin 120 ARGB is a single-tower air cooler compatible with LGA 1150 sockets. You get six 6-millimeter copper heat pipes with a copper base, an aluminum heatsink, and a 120-millimeter PWM fan. The fan delivers up to 66.17 CFM of airflow while keeping noise at 25.6 dB(A) or below. At 154 millimeters tall, it fits medium-sized PC cases that need reliable cooling with built-in ARGB lighting.
Pros
- Six 6mm copper heat pipes with anti-gravity technology
- 120mm PWM fan delivers up to 66.17 CFM airflow
- Rated noise level remains at or below 25.6 dB(A)
- S-FDB fan bearing rated for 20,000 hours of operation
Cons
- 154mm height requires a medium or large PC case
- Uses a single cooling fan rather than a dual-fan setup
Good fit if
- You want a single-tower heatsink with six heat pipes for an LGA 1150 system.
- You have a medium-sized case with at least 154mm of cooler clearance.
- You prefer a 120mm PWM fan with integrated ARGB lighting.
Skip if
- You require a low-profile cooler for a slim or small-form-factor case.
- You want a dual-tower cooler with dual fans for maximum heat dissipation.
Verdict: Thermalright Burst Assassin 120 ARGB CPU Cooler pairs six copper heat pipes with a 120mm PWM fan for balanced cooling in standard mid-tower cases.
Specifications side by side
| Spec | Thermaltake Gravity i2 92mm CPU Cooler | SilverStone 80mm Low-Profile CPU Cooler | Thermaltake Gravity i2 92mm Intel CPU Cooler | JIUWU 92mm 4-Heatpipe Blue LED Cooler | Toptekits Copper Core Low-Profile Cooler | Thermalright Peerless Assassin 120 Dual Fan Cooler | Thermalright 47mm Low-Profile CPU Cooler | Thermalright AXP90 36mm Low-Profile Cooler | Thermalright 53mm Low-Profile CPU Cooler | Thermalright Dual Tower 5-Heatpipe CPU Cooler | Thermalright Peerless Assassin Dual Tower Air Cooler | Thermalright Assassin X120 120mm Air Cooler | Thermalright Peerless Assassin 120 White ARGB Cooler | Thermalright Assassin X 120 ARGB Cooler | Thermalright Burst Assassin 120 ARGB |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Socket Compatibility | LGA 1200/1156/1155/1150/1151 | LGA 1156/1155/1150 | LGA 1200/1156/1155/1150/1151 | LGA 775, 1150/1151/1155/1156, AM4 | LGA 1150/1151/1155/1156 | not specified | AM4, AM5, LGA115x/1200/1700/1851 | AM4, AM5, LGA1150/1151/1200/1700/1851 | AM4, AM5, LGA115x, LGA1200, LGA1851 | AM4, AM5, LGA1150, LGA1200, LGA1700 | AM4, AM5, LGA1700, LGA1851, LGA1200 | AM4, AM5, LGA1700, LGA1851, LGA1200 | not specified | not specified | AM4, AM5, LGA1700/1851/1150/1151/1200 |
| Cooler Height | not specified | 23mm | not specified | not specified | 27mm | 157mm | 47mm | 36mm | 53mm | 160 mm | 155 mm | 148 mm | 155 mm | 148 mm | 154 mm |
| Heat Pipes | not specified | not specified | not specified | 4 | not specified | 6 | 4 | 4 | 4 | 5 | 6 | 4 | 6 | 4 | 6 |
| Tower Design | Low-profile | Low Profile | Low Profile | not specified | Low-Profile | Double tower | Low-Profile | Low-Profile | Low-Profile | Dual-Tower | Dual-Tower | not specified | Dual-Tower | Single-Tower | Single-Tower |
| Fan Size | 92mm | 80mm | 92mm | 92mm | 80mm | 120mm | 92mm | not specified | 90mm | 120 mm, 140 mm | 120 mm | 120 mm | 120 mm | 120 mm | 120 mm |
| TDP Rating | not specified | not specified | 95W | not specified | not specified | not specified | not specified | not specified | not specified | 275 W | not specified | not specified | not specified | not specified | not specified |
| Fan Speed | not specified | not specified | not specified | 1800 RPM | 2700 RPM ± 10% | 1550rpm±10% | not specified | not specified | not specified | 1850 RPM | 1550 RPM | 1550 RPM | 1550 RPM | 1550 RPM | 1550 RPM |
| Lighting | not specified | not specified | not specified | Blue LED | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | ARGB | ARGB | ARGB |
| System Type | not specified | not specified | Desktop | Desktop | not specified | not specified | ITX | ITX | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Color | Black | NT07-115X | Black | not specified | H116 | PA120 | Black | AXP90-X36 | Black | Black | PA120 SE | not specified | White | AX120R SE ARGB | BA120 ARGB |
| Material | Aluminum | not specified | not specified | not specified | Copper | not specified | not specified | not specified | not specified | Aluminum | not specified | Aluminum | Aluminum | not specified | not specified |
| Features | Fan | not specified | not specified | Fan | Fan | not specified | Fan | Fan | Fan | Fan | not specified | Fan | Fan | Fan | Fan |
| Dimensions | 3.7 × 2.4 × 3.7 inches | 4 × 4 × 3 inches | 4.25 × 4.25 × 4 inches | 3.9 × 3.62 × 1.02 inches | 3.94 × 3.94 × 1.77 inches | 6.18 × 5.31 × 4.92 inches | 3.74 × 3.74 × 1.26 inches | 3.74 × 3.7 × 0.83 inches | 3.7 × 3.74 × 1.5 inches | 6.3 × 5.75 × 5.51 inches | 6.1 × 5.31 × 4.92 inches | 4.72 × 2.8 × 5.83 inches | 4.92 × 5.31 × 6.1 inches | 4.92 × 2.8 × 5.83 inches | 4.9 × 2 × 6 inches |
| Weight | 11 ounces | 8 ounces | 11.4 ounces | not specified | 7.76 ounces | 1 pounds | 1.1 pounds | 14.4 ounces | 1 pounds | 2.2 pounds | 2 pounds | 1.42 pounds | 1.87 pounds | 1.39 pounds | 1.12 pounds |
| Size | Intel | not specified | Intel | not specified | H116 | PA120 series | Height 47mm | Height 36mm | Height 53mm | 5 Heat Pipes | PA120 SE series | not specified | PA120 SE series | 4 Heatpies | 4 Heatpies |
| Model | CLP0556-B | NT07-115X | CLP0556-D | DNFS004 | H116 | LM-PA 120 | AXP90 X47 BLACK | AXP90 X36 | AXP90 X53 BLACK | FC140 BLACK | PA120 SE | AX120 Refined SE | not specified | not specified | BA120 ARGB-D1 |
Is LGA 1150 Socket Compatibility Worth It?
LGA 1150 socket compatibility provides exact mounting alignment for Intel LGA 1150 motherboards. This specification guarantees heatsink brackets match board mounting holes for secure processor contact. In daily use, proper socket support prevents improper thermal contact. Many coolers on this list pair LGA 1150 support with modern sockets like AM4, AM5, LGA 1200, LGA 1700, and LGA 1851. That multi-socket capability lets you migrate the same cooler to newer desktop platforms later. Other units combine LGA 1150 support with older sockets like LGA 775 and LGA 1156.
Worth it if
- You mount a cooler directly onto an Intel LGA 1150 desktop motherboard.
- You want hardware that also migrates to sockets like AM4, AM5, LGA 1700, or LGA 1851.
Skip it if
- You use a motherboard that does not match LGA 1150, LGA 1200, LGA 1700, AM4, or AM5 mounting points.
- You already have a working cooler installed on your LGA 1150 socket.
If you need lower socket clearance or radiator mounting, you can examine an aio liquid cooler for LGA 1150 for your build.
How We Picked These Coolers
To find the best options for your build, we evaluated listings that explicitly state LGA 1150 socket compatibility in their titles or feature lists. Each cooler on this list includes published support for the LGA 1150 platform to ensure a proper fit on your motherboard. All details come directly from the specifications and feature lists published on the listings, and products are not physically handled. We also show only one size or variant of each product family to maintain variety.
The 15 coolers are arranged with products in stock first. This allows you to identify available options that match your case dimensions, whether you require a compact low-profile heatsink or a dual-tower model.
Choosing the Right LGA 1150 Cooler
-
Count the Heat Pipes
Heat pipes pull heat away from your processor and spread it into the fin stack. You should check the heat pipe count on the specification sheet before choosing a heatsink. Basic coolers rely entirely on solid metal blocks, while advanced units use four to six heat pipes to boost thermal conduction. For high thermal loads, pick a heatsink with five or six pipes. The Thermalright Dual Tower 5-Heatpipe CPU Cooler features five 8mm heat pipes to manage up to 275W TDP processors. Fewer pipes suit lower-power desktop tasks.
-
Evaluate Fan Dimensions
Fan diameter directly determines how much air passes through the cooling fins at a given speed. Coolers on this list use 80mm, 92mm, or 120mm fans. Larger 120mm fans generate airflow with lower rotational speed, while compact 80mm and 92mm fans fit into narrow desktop footprints. Check the manufacturer airflow ratings to verify thermal throughput. For example, the Thermaltake Gravity i2 92mm Intel CPU Cooler outputs 31.343 CFM of airflow to cool 95W processors. Choose smaller fans for restricted motherboard layouts and 120mm fans when you want higher airflow volume.
-
Compare Heatsink Base Materials
Thermal conductivity depends heavily on the metal contacting your processor lid. Aluminum heatsinks keep overall unit weight low and handle moderate thermal dissipation reliably. Copper provides faster thermal absorption directly at the contact point. You should check the material specifications when selecting a heatsink for compact cases where metal mass is limited. The Toptekits Copper Core Low-Profile Cooler uses a copper core heatsink to draw heat quickly away from the socket area. Choose solid aluminum for basic lightweight setups, or pick copper when you need denser thermal conductivity in small form factors.
-
Select Tower Layout Architecture
The structural layout of a heatsink impacts fin surface area and clearance around motherboard memory slots. Single-tower designs use a single fin array and one fan, reducing width and leaving room near memory modules. Dual-tower coolers split heat across two separate fin arrays and can support dual fans for maximum heat dissipation. The Thermalright Burst Assassin 120 ARGB features a single-tower design that fits standard mid-tower setups without crowding neighboring motherboard components. Select a single tower for easier clearance around memory sockets, or pick dual towers when your case can accommodate greater heatsink width.
-
Review Fan Lighting Options
Heatsink aesthetics vary from unlit, industrial finishes to addressable illumination. Check the lighting specification to match your visual build requirements. Standard black or unlit models focus strictly on cooling performance without extra wiring. If you want lighting synchronized with your system, verify that the cooler explicitly lists ARGB support. The Thermalright Assassin X 120 ARGB Cooler integrates an ARGB fan for builders wanting illuminated airflow inside a mid-tower case. Choose unlit models if you prefer a clean, dark interior, or choose an ARGB unit if your motherboard includes the appropriate addressable header.
-
Verify Cross Socket Compatibility
If you plan to repurpose your cooler across different motherboards, check the full socket compatibility list. While every cooler here supports LGA 1150, certain models include hardware for older or newer platforms. For example, the JIUWU 92mm 4-Heatpipe Blue LED Cooler supports legacy LGA 775 alongside LGA 1150 and LGA 1151. Other coolers add modern AM4, AM5, or LGA 1700 mounting brackets. Review the listed socket specifications carefully to ensure the heatsink fits your current motherboard and any alternate computer systems you might maintain or upgrade.
Frequently asked questions
Can an LGA 1150 CPU cooler also fit LGA 1151 or LGA 1200 motherboards?
Yes, many LGA 1150 coolers also fit LGA 1151 and LGA 1200 sockets because they share identical mounting hole spacing. For example, models like the Thermaltake Gravity i2 CLP0556-B and Thermalright Assassin X120 officially list compatibility across LGA 1150, LGA 1151, and LGA 1200 platforms. You must always confirm manufacturer specifications before installation to ensure the included mounting hardware supports your specific socket.
What is the difference between single-tower and dual-tower LGA 1150 coolers?
Dual-tower coolers provide two separate fin stacks and typically include dual fans, whereas single-tower designs use one fin array. The Thermalright Burst Assassin 120 ARGB features a single-tower design with six heat pipes, offering easier clearance for memory modules. In comparison, the Thermalright Peerless Assassin 120 utilizes dual towers and two 120mm fans, providing more surface area to disperse thermal energy inside standard PC enclosures.
Are low-profile coolers adequate for compact LGA 1150 computer cases?
Yes, low-profile coolers are engineered specifically for small form factor cases where vertical room is severely restricted. Options like the SilverStone 80mm cooler and Toptekits Copper Core model maintain slim footprints designed for tight enclosures, including 1U rackmount chassis. While they handle standard desktop thermal demands, you should check your case dimensions to ensure sufficient airflow room above the fan.
How do fan sizes affect cooling performance on an LGA 1150 heatsink?
Larger fans move greater volumes of air through heatsink fins at lower rotation speeds. A 120mm fan, such as the one on the Thermalright Assassin X 120 ARGB, pushes substantial airflow across wide surface areas. In contrast, compact options like the SilverStone 80mm cooler fit restricted spaces but move less air volume. You must balance the fan dimension against your chassis width.
Does an LGA 1150 cooler require copper heat pipes to dissipate heat?
No, an LGA 1150 cooler does not strictly require heat pipes for basic cooling. The Thermaltake Gravity i2 CLP0556-B relies on a solid aluminum heatsink, whereas models like the JIUWU cooler utilize four direct-contact heat pipes. While copper heat pipes rapidly transfer heat away from high-wattage processors to fin stacks, all-aluminum blocks remain effective for lower-power CPUs and basic desktop tasks.
Can you install an LGA 1150 cooler on modern sockets like AM4, AM5, or LGA 1700?
You can install certain LGA 1150 coolers on newer platforms if the model includes multi-socket brackets. Coolers like the Thermalright Peerless Assassin 120 SE and Thermalright FC140 list compatibility with LGA 1150 alongside AM4, AM5, and LGA 1700 or LGA 1851. However, older units like the SilverStone NT07-115X only support LGA 1150 and LGA 1156. You should check the product socket list.