Thermalright AXP120-X67 Low Profile Cooler Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This thermalright axp120 x67 low profile CPU review covers a compact air cooler designed for small form factor builds. The unit stands out with a total height of just 67 mm, allowing it to fit into tight cases where standard towers cannot. It utilizes a standard 120 mm PWM fan to move air across its fin stack. The cooler features six pure copper heat pipes connected to a copper base. These specifications combine to provide a balanced cooling solution for modern processors without requiring excessive case clearance.
What stands out
- 67 mm total height for small case compatibility
- Six 6mm pure copper heat pipes with AGHP technology
- 120x120x15mm PWM fan with 59 CFM max airflow
- Supports Intel LGA 1700, 1200, 115x, 2011, 2066 and AMD AM4 sockets
- Noise level capped at 26.1 dB(A) at maximum speed
Who it fits
Good fit for
You should consider this cooler if you are building in a mini-ITX or micro-ATX case with limited CPU clearance. The 67 mm height is ideal for users who need a low profile but still want six heat pipes for adequate heat dissipation. It suits owners of Intel LGA 1700 or AMD AM4 platforms who prioritize case compatibility over extreme overclocking potential. The included PWM fan allows for quiet operation at lower loads.
Who should skip it
You should look elsewhere if your case requires a cooler under 60 mm, as this unit is 67 mm tall. Users seeking RGB lighting should note that the standard model does not include ARGB features, though a white ARGB variant exists. If you need support for newer Intel sockets like LGA 1851, verify your specific motherboard compatibility, as the data lists mixed socket support. This is not a solution for extreme high-wattage CPUs in tight spaces.
Verdict: The Thermalright AXP120-X67 offers a practical balance of low height and solid thermal capacity through its six heat pipes. It is a reliable choice for compact builds that require standard 120 mm fan support.
Key specs explained
Cooler Height: 67 mm
This low-profile measurement allows the cooler to fit into compact cases where standard towers are too tall. You gain flexibility in case selection without sacrificing cooling capacity. If your case supports over 70 mm, you have more options. This height is ideal for mini-ITX builds where space is limited.
Heat Pipes: 6
Six pure copper heat pipes transfer heat from the CPU base to the aluminum fins efficiently. This configuration helps manage thermal load in a small volume. More pipes generally mean better heat distribution. You benefit from consistent performance under load. Compare this to coolers with fewer pipes for similar size constraints.
Fan Size: 120 mm
A 120 mm fan moves a larger volume of air compared to smaller 80 mm units. This size balances airflow and noise levels effectively. You get quiet operation with adequate cooling power. The 15 mm thickness keeps the profile low. Check your case fan support to ensure compatibility with this standard dimension.
Fan Speed: 1800 RPM
This maximum speed provides strong airflow while keeping noise under 26.1 dB. You can run the fan slower for silence or faster for cooling. The PWM control allows precise adjustments. This speed range suits users who want quiet operation. Compare it with faster fans that may generate more audible noise during heavy tasks.
Socket Compatibility: AM4, LGA 1700
Support for these major sockets ensures broad compatibility with current and recent AMD and Intel processors. You can install this cooler on most modern systems without adapter issues. Check your motherboard socket type before buying. This coverage simplifies the upgrade process for users switching platforms.
Design and build details
The Thermalright AXP120-X67 is a low-profile tower cooler with a total height of 67 mm. The listing states the dimensions are 123.5 mm in length, 120 mm in width, and 67 mm in height. It weighs 1.34 pounds. This compact footprint allows it to fit into small form factor cases where standard air coolers are too tall. You can install it in tight spaces without removing other components.
The heat sink uses aluminum fins attached to a pure copper base. It includes six 6 mm copper heat pipes. These pipes use AGHP technology to manage heat transfer effectively regardless of orientation. The cooler comes with metal fasteners for Intel and AMD platforms. This mounting system aims to provide secure installation on sockets like LGA 1700 and AM4. The listing notes a full electroplating reflow welding process for the joints.
It ships with a 120x120x15 mm PWM fan. The fan model is the TL-C12015. It runs at 1800 RPM with an airflow of 59 CFM. The noise level is listed at 26.1 dB(A). You connect it via a 4-pin header. This setup keeps the profile low while maintaining adequate airflow for the small fin area. The design prioritizes fitment in compact builds over extreme bulk.
Setup and daily use guide
Installing the Thermalright AXP120-X67 involves mounting it to your motherboard socket. The listing specifies compatibility with Intel LGA 1700, 1150, 1151, 1155, 1156, 1200, 2011, and 2066. It also supports AMD AM4 sockets. You will use the included metal fasteners for a secure fit on these platforms. The cooler stands 67 mm tall, which is critical for small form factor cases. Ensure your case clearance exceeds this height before installation. The unit weighs 1.34 pounds, so your motherboard socket must support this load. The 120 mm fan connects via a standard 4-pin PWM header. This allows your motherboard to adjust fan speed automatically. The listed maximum speed is 1800 RPM, with a maximum airflow of 59 CFM. Noise levels are capped at 26.1 dB(A) under these conditions. The six 6 mm heat pipes use AGHP technology. This design helps manage heat transfer regardless of whether your case is oriented vertically or horizontally. In daily use, the cooler relies on the included TL-C12015 PWM fan. You do not need additional controllers. The pure copper base and aluminum fins work together to dissipate heat. The full electroplating reflow welding process ensures the heat pipes remain securely attached to the base. This setup provides a stable cooling solution for compact builds. You benefit from low-profile dimensions without sacrificing the thermal mass of six heat pipes. The system operates silently at idle and scales up under load. This makes it suitable for office PCs or home theater setups where noise matters.
Before You Buy This Cooler
You should verify your case supports the 67 mm height before purchasing. This low-profile design fits small form factor builds where standard towers fail. The listing notes compatibility with Intel LGA 1700, 1150, 1151, 1155, 1156, 1200, 2011, and 2066, plus AMD AM4. Ensure your motherboard socket matches one of these. The cooler includes a 120 mm PWM fan, so you must connect it to the correct 4-pin header on your board. Dust accumulation on the aluminum fins and copper base can reduce efficiency over time. You should clean the unit periodically with compressed air to maintain airflow. This model sits alongside other compact air coolers in our guide. It offers a specific solution for tight spaces rather than maximum raw cooling power. If you need higher thermal capacity, you may need a larger tower. Check your RAM clearance as well, since the 120 mm fan sits close to memory slots. Proper airflow within your case remains essential for this cooler to perform as advertised.
Check before you buy
- Verify your case supports 67 mm cooler height
- Check motherboard socket matches Intel or AMD list
- Ensure RAM clearance fits the 120 mm fan
- Confirm you have an available 4-pin PWM header
The product at a glance
Thermalright AXP120-X67 Low Profile Cooler
Best for: small cases with LGA 1700 or AM4
- Socket Compatibility
- AM4, LGA 1700, 1851, 1200, 2011, 2066
- Cooler Height
- 67 mm
- Heat Pipes
- 6
- Tower Design
- Low-Profile
- Fan Size
- 120 mm
- Fan Speed
- 1800 RPM
View on Amazon: Thermalright AXP120-X67 Low Profile Cooler Affiliate link
The Thermalright AXP120-X67 is a low-profile air cooler standing 67mm tall. It uses six 6mm copper heat pipes with AGHP technology to manage heat effectively in vertical or horizontal positions. The included 120mm PWM fan moves up to 59 CFM of air while staying under 26.1 dB. It supports modern Intel sockets like LGA 1700 and AMD AM4. This design suits small form factor builds where case clearance is tight.
Pros
- 67mm total height fits in compact cases
- Six 6mm pure copper heat pipes with AGHP
- 120mm PWM fan provides 59 CFM airflow
- Supports LGA 1700 and AM4 sockets
- Noise level stays at or below 26.1 dB
Cons
- Limited to 67mm height restricts high-TDP CPUs
- Only supports AM4 for AMD platforms
- Includes only one fan in the package
Good fit if
- You need a cooler under 70mm for a small case
- You use an Intel LGA 1700 or 115x socket
- You prefer quiet operation under 27 dB
Skip if
- You require support for AMD AM5 sockets
- You need a cooler taller than 70mm
- You want included RGB lighting effects
Verdict: The Thermalright AXP120-X67 Low Profile 67mm Cooler delivers reliable cooling in tight spaces through its six heat pipes and quiet 120mm fan. It is the right fit for builders using LGA 1700 or AM4 who must stay under 67mm in height.
Specifications side by side
| Spec | Thermalright AXP120-X67 Low Profile Cooler |
|---|---|
| Socket Compatibility | AM4, LGA 1700, 1851, 1200, 2011, 2066 |
| Cooler Height | 67 mm |
| Heat Pipes | 6 |
| Tower Design | Low-Profile |
| Fan Size | 120 mm |
| Fan Speed | 1800 RPM |
| Features | Fan |
| Dimensions | 4.86 × 4.72 × 2.64 inches |
| Weight | 1.34 pounds |
| Size | Height 67mm |
| Color | AXP120-X67 1700 |
| Model | AXP120-X67 1700-d2 |
Frequently asked questions
Does the Thermalright AXP120-X67 support LGA 1700?
Yes, this cooler supports the LGA 1700 socket. It also works with AM4, LGA 1851, LGA 1200, LGA 1150, and LGA 1151. This wide compatibility makes it suitable for many modern and older platforms. You can mount it on your motherboard if your socket matches one of these listed options.
How many heat pipes does the AXP120-X67 have?
The cooler features six heat pipes. These pipes help transfer heat away from the CPU efficiently. This design allows the unit to maintain reliable cooling performance despite its small size. You get robust thermal conductivity in a compact form factor.
What is the total height of this cooler?
The total height is 67 mm. This measurement ensures it fits in cases with low clearance. You do not need a large case to use this air cooler. It is designed specifically for tight spaces where standard towers will not fit.
What is the weight of the Thermalright AXP120-X67?
The unit weighs 1.34 pounds. This weight is manageable for standard motherboard mounting brackets. You can install it without worrying about excessive stress on the socket. The mass helps with thermal contact but remains light enough for standard low-profile builds.
Is a fan included with the AXP120-X67?
Yes, the product listing indicates it includes a fan. The cooler relies on a 120mm fan for airflow. You get the necessary components for active cooling in the box. This setup ensures you can operate the cooler immediately after installation.
Does this cooler fit in small form factor cases?
Yes, it is designed for small cases. The 67 mm height allows it to fit where standard towers fail. You gain flexibility in case selection without sacrificing cooling capacity. It is the right fit for builders who must stay under the 67 mm limit.