StarTech.com 65x60x45mm Socket 7/370 CPU Cooler or StarTech.com Socket 7/370 Bonded Fin? Which StarTech.com Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are deciding between the startech com 65x60x45mm socket 7 370 CPU cooler vs socket 7 7 370 bonded. Both units target Socket 7 and Socket 370 processors. They share the same weight of 4.8 ounces. The main difference is their physical design. One is a compact fan and heatsink combo. The other uses a bonded fin structure with larger overall dimensions. You need to match the form factor to your case and motherboard layout.
Key differences
| Aspect | StarTech.com 65x60x45mm Socket 7/370 CPU Cooler | StarTech.com Socket 7/370 Bonded Fin Cooler |
|---|---|---|
| Model | FAN370PRO | FANP100PRO |
| Dimensions | 65x60x45mm | 8x6x4 inches |
| Construction | Fan with heatsink | Bonded fin |
| Color | Black | not listed |
Which one should you choose?
Choose StarTech.com 65x60x45mm Socket 7/370 CPU Cooler if
- You need a compact 65x60x45mm footprint for tight cases
- You require an integrated fan with the heatsink
- You prefer a black color scheme
Choose StarTech.com Socket 7/370 Bonded Fin Cooler if
- You need a larger 8x6x4 inch bonded fin design
- You are using a Socket 7 or 370 motherboard with space for a larger cooler
- You want a passive-style bonded fin structure
Verdict: Choose the FAN370PRO if space is limited and you need a complete fan and heatsink unit. Pick the FANP100PRO if your case can accommodate its larger 8x6x4 inch bonded fin design. Both support the same legacy sockets.
StarTech Socket 7 Cooler Specs
Socket Compatibility
Both coolers support the same legacy processors. The StarTech.com 65x60x45mm Socket 7/370 CPU Cooler and the StarTech.com Socket 7/370 Bonded Fin Cooler list identical socket compatibility. You can use either unit on Socket 7 or Socket 370 motherboards. This shared specification means the choice does not depend on processor socket type. Both models fit the same older systems. The compatibility range is equal for both products. You do not need to worry about mismatched sockets when selecting between these two StarTech options.
Physical Dimensions
The physical sizes differ significantly between the two models. The StarTech.com 65x60x45mm Socket 7/370 CPU Cooler has a compact heatsink measuring 65x60x45mm. The StarTech.com Socket 7/370 Bonded Fin Cooler lists dimensions of 8 inches in length, 6 inches in width, and 4 inches in height. The bonded fin unit is much larger. You must check your case clearance carefully. The smaller fan-based cooler fits tighter spaces. The bonded fin design requires more room. This size difference is the primary physical distinction between the two products.
Weight
Both units share the exact same weight. Each cooler weighs 4.8 ounces. This identical weight suggests similar material usage or density. You do not need to worry about one being heavier on your motherboard. The mounting stress will be the same for both options. This specification does not help you choose between them. The weight is a neutral factor in this comparison. Both products exert the same downward force on the CPU socket.
Cooling Design
The cooling mechanisms are distinct. The StarTech.com 65x60x45mm Socket 7/370 CPU Cooler includes a fan and heatsink. It is an active cooling solution. The StarTech.com Socket 7/370 Bonded Fin Cooler is described as a bonded fin unit. It likely relies on passive convection or requires a separate fan not listed in the specs. The active model provides forced airflow. The passive model depends on ambient air movement. You need a case with good airflow for the bonded fin version. The fan model is more self-contained.
Model Identification
Each product has a unique model number. The fan cooler is model FAN370PRO. The bonded fin cooler is model FANP100PRO. These distinct identifiers help you find the correct replacement part. You should check your existing cooler model before buying. The model numbers confirm these are different products from the same brand. They serve different thermal needs. The fan model is designed for active cooling. The bonded fin model offers a different thermal profile.
Which StarTech Socket 7 Cooler Fits You
User needing a compact 45mm height cooler
This model measures 65x60x45mm. Its low profile fits cases with limited vertical clearance. You get a fan included for active cooling. The specific 45mm height ensures it stays below tight case limits. This size is critical for older mini-tower cases where space is tight. The bonded fin version lacks these precise dimensions in the data.
User wanting a simple bonded fin design
This unit uses a bonded fin construction. The data lists dimensions of 8x6x4 inches. This design relies on passive or separate fan cooling. It suits builds where you already have case airflow or prefer a different mounting style. The larger footprint allows for more surface area if paired with adequate air movement.
User requiring an integrated fan solution
The 65x60x45mm model explicitly includes a fan. This is vital for Socket 7 systems that lack case fans. The TX3 connector matches older motherboard headers. You do not need to source a separate fan. This all-in-one approach simplifies installation on legacy hardware where compatible fans are hard to find.
The products compared
StarTech.com 65x60x45mm Socket 7/370 CPU Cooler
Best for: Socket 7 and Socket 370 retro PC builds
- Socket Compatibility
- Socket 7/370
- Features
- Fan
- Weight
- 4.8 ounces
View on Amazon: StarTech.com 65x60x45mm Socket 7/370 CPU Cooler Affiliate link
This StarTech.com cooler is designed for Socket 7 and Socket 370 processors. It measures 65x60x45mm and weighs 4.8 ounces. The unit includes a fan and a TX3 connector for power. It is a compact solution for older systems. You should choose this if you need a direct replacement for legacy hardware. It fits small form factor builds that require specific socket support.
Pros
- Compatible with Socket 7 and Socket 370
- Compact 65x60x45mm dimensions
- Includes TX3 connector
- Lightweight at 4.8 ounces
Cons
- Limited to older Socket 7/370 platforms
- Small 45mm height restricts airflow
- No mention of PWM speed control
Good fit if
- You are upgrading a Socket 7 or Socket 370 system
- You need a specific TX3 connector
- You require a low-profile 65x60mm cooler
Skip if
- You use modern sockets like LGA 1155 or AM4
- You need high airflow for heavy loads
- You prefer silent operation without a fan
Verdict: StarTech.com 65x60x45mm Socket 7 Cooler is a niche part for retro builds. It fits users restoring Socket 7 or 370 machines who need the TX3 connector.
StarTech.com Socket 7/370 Bonded Fin Cooler
Best for: retro Socket 7 and 370 systems
- Socket Compatibility
- Socket 7/370
- Dimensions
- 8 × 6 × 4 inches
- Weight
- 4.8 ounces
View on Amazon: StarTech.com Socket 7/370 Bonded Fin Cooler Affiliate link
This StarTech.com bonded fin cooler supports Socket 7 and Socket 370 processors. It measures 6 inches wide, 4 inches high, and 8 inches long. The unit weighs 4.8 ounces. This compact design fits older systems that require specific socket compatibility. You should choose this model if you need a direct replacement for legacy hardware. It provides basic cooling for vintage CPUs without requiring modern mounting solutions.
Pros
- Compatible with Socket 7 and Socket 370
- Compact dimensions of 6x4x8 inches
- Lightweight at 4.8 ounces
Cons
- Limited to older Socket 7 and 370 platforms
- Small heatsink surface area compared to modern coolers
- No mention of fan speed or noise levels
Good fit if
- You are building a retro PC with Socket 7 or 370
- You need a lightweight cooler for a small form factor case
- You require a direct drop-in replacement for legacy hardware
Skip if
- You use modern sockets like LGA1700 or AM5
- You need high airflow for overclocking
- You require adjustable fan speeds or PWM control
Verdict: StarTech.com Socket 7/370 Bonded Fin Cooler is a niche solution for retro builders. It fits older systems needing Socket 7 or 370 support. It does not suit modern high-performance builds.
Specifications side by side
| Spec | StarTech.com 65x60x45mm Socket 7/370 CPU Cooler | StarTech.com Socket 7/370 Bonded Fin Cooler |
|---|---|---|
| Socket Compatibility | Socket 7/370 | Socket 7/370 |
| Features | Fan | not stated |
| Weight | 4.8 ounces | 4.8 ounces |
| Dimensions | not stated | 8 × 6 × 4 inches |
| Size | 65x60x45mm | not stated |
| Color | Black | not stated |
| Model | FAN370PRO | FANP100PRO |
Frequently asked questions
Does the StarTech.com 65x60x45mm Socket 7/370 CPU Cooler include a fan?
Yes, this model includes a fan for active cooling. The product attributes list fan as a key feature. This allows you to install it on processors that generate heat during operation. You do not need to source a separate fan for basic retro PC restoration projects.
What are the exact dimensions of the StarTech.com Socket 7/370 Bonded Fin Cooler?
The bonded fin cooler measures 8 inches in length, 6 inches in width, and 4 inches in height. These dimensions indicate a larger physical footprint compared to the compact 45mm height of the other model. You should verify your case space before installation to ensure it fits properly.
Can I use the bonded fin cooler on a modern high-performance build?
No, this cooler is not suitable for modern high-performance builds. The product verdict explicitly states it fits older systems needing Socket 7 or 370 support. It is designed as a niche solution for legacy hardware restoration rather than current generation processors.
How much does the StarTech.com Socket 7/370 CPU Cooler weigh?
The 65x60x45mm model weighs 4.8 ounces. This weight is identical to the bonded fin version. The light weight suggests it places minimal stress on the motherboard socket. You can handle the unit easily during installation on retro systems.
Which cooler is better for tight case clearances?
The 65x60x45mm model is better for tight cases. It features a low profile with a 45mm height. This design ensures it stays below tight vertical clearances found in many small form factor retro builds. The bonded fin version is significantly larger and may not fit.
What connector type does the StarTech.com 65x60x45mm cooler use?
This cooler uses the TX3 connector. This specific connector is necessary for users restoring Socket 7 or 370 machines. You must ensure your motherboard or fan controller supports this interface for proper power delivery and operation.
Is the StarTech.com Socket 7/370 Bonded Fin Cooler an active or passive solution?
The data does not list a fan in the attributes for the bonded fin model. It is described as a bonded fin cooler, which typically implies passive cooling. You should check if your system requires active airflow or if passive dissipation is sufficient for your retro build.
What is the model number for the bonded fin cooler?
The model number is FANP100PRO. You can use this identifier to verify compatibility with your specific retro hardware. It distinguishes this unit from the FAN370PRO model, which is the 65x60x45mm active cooler.