SilverStone vs UBJFMAC CPU Coolers: Which Brand Fits You?
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When you compare the SilverStone vs UBJFMAC CPU cooler options, you see two very different designs. Both are air coolers built for specific hardware needs. The SilverStone unit is a low-profile model for small cases and older Intel sockets. The UBJFMAC unit is a 2U server cooler for high-power AMD Threadripper processors. You need to match the cooler to your socket type and case size. This guide breaks down the specs to help you decide.
Key differences
| Aspect | SilverStone 80mm Low-Profile CPU Cooler | UBJFMAC 2U Server Cooler with 4 Heat Pipes |
|---|---|---|
| Socket Compatibility | LGA 1156/1155/1150 | sWRX8, sTRX4, TR4, SP3 |
| Tower Design | Low Profile (23mm tall) | 2U Server Height |
| Heat Pipes | not listed | 4 |
| TDP Rating | not listed | 280W |
| Fan Size | 80mm | not listed |
Which one should you choose?
Choose SilverStone 80mm Low-Profile CPU Cooler if
- You use an Intel LGA 1156, 1155, or 1150 processor.
- You have a small form factor case with height limits under 23mm.
- You need a quiet 80mm fan solution for light to medium loads.
Choose UBJFMAC 2U Server Cooler with 4 Heat Pipes if
- You use a high-end AMD Threadripper processor on sWRX8, sTRX4, TR4, or SP3 sockets.
- You are building a 2U server or workstation chassis.
- You need to dissipate up to 280W of heat with four heat pipes.
Verdict: The SilverStone cooler is the practical choice for compact PCs using older Intel platforms. The UBJFMAC cooler is the correct tool for high-performance Threadripper workstations in server racks. Your decision depends entirely on your socket type and chassis constraints.
SilverStone vs UBJFMAC Spec Showdown
Socket Compatibility
The SilverStone NT07-115X targets older Intel platforms, supporting LGA 1156, 1155, and 1150 sockets. This makes it a precise fit for legacy systems. In contrast, the UBJFMAC A26 is built for AMD workstation processors. It supports sWRX8, sTRX4, TR4, and SP3 sockets. These are high-end Threadripper and EPYC interfaces. You must choose based on your motherboard. If you have an older Intel board, only the SilverStone works. If you use a Threadripper, only the UBJFMAC fits. They cover completely different ecosystems. Neither is a universal solution for both types of hardware.
Heat Dissipation
Thermal handling differs significantly between these two coolers. The UBJFMAC A26 is rated for 280W of heat dissipation. This high TDP rating is necessary for powerful Ryzen Threadripper processors. The SilverStone NT07-115X is a low-profile unit with a small 80mm fan. It produces 28.1 CFM of airflow. This is sufficient for low-power desktop CPUs in compact cases. It is not designed for high-wattage workstations. The UBJFMAC handles heavy loads with four heat pipes. The SilverStone relies on a compact copper base and aluminum fins. You need high TDP support for serious rendering tasks.
Tower Design
Physical dimensions dictate where you can install these coolers. The SilverStone NT07-115X is extremely low profile. It stands only 23mm tall. This allows it to fit inside small form factor cases with limited height clearance. The UBJFMAC A26 is a 2U server cooler. It is designed for rack-mounted equipment or specific server chassis. It is not intended for standard desktop ATX cases. The SilverStone fits in tight spaces. The UBJFMAC fits in enterprise environments. You must match the cooler height to your case or server rack constraints. One is for small PCs, the other for servers.
Fan Size
The SilverStone NT07-115X uses a custom 80mm PWM fan. This smaller fan size is standard for low-profile coolers. It helps maintain a compact footprint while providing necessary airflow. The UBJFMAC A26 does not list a specific fan size in the provided data. It is described as a radiator cooler for 2U systems. Larger server coolers often use 80mm or 92mm fans, but the exact size is not confirmed here. The SilverStone specifies its fan dimensions clearly. This transparency helps you plan airflow. The UBJFMAC relies on its heat pipe count for cooling performance.
Heat Pipes
Heat transfer efficiency often depends on the number of heat pipes. The UBJFMAC A26 includes four heat pipes. These pipes help move heat from the CPU base to the fins quickly. This supports its 280W TDP rating. The SilverStone NT07-115X does not list heat pipes in its key specs. It uses a copper center and base with extruded aluminum fins. This design is common for low-profile coolers where space is restricted. The UBJFMAC has a clear advantage in heat pipe count. This suggests better thermal conductivity for high-power chips. The SilverStone prioritizes size over advanced heat transfer methods.
Which CPU Cooler Fits Your Build
You need a low-profile cooler for an old Intel PC
The SilverStone NT07-115X stands only 23mm tall. It fits small cases and supports LGA 1156, 1155, and 1150 sockets. The 80mm fan moves 28.1 CFM of air. Noise stays low at 26.0 decibels. This unit uses a copper base and aluminum fins. It is a precise match for legacy Intel systems where space is tight.
You build a high-end AMD workstation with Threadripper
The UBJFMAC A26 handles 280W TDP loads. It features four heat pipes for efficient heat transfer. This cooler supports sWRX8, sTRX4, TR4, and SP3 sockets. It is designed as a 2U server-grade unit. If you run Ryzen Threadripper processors, this model provides the necessary cooling capacity and socket compatibility for demanding workloads.
You want quiet operation in a compact Intel system
The SilverStone NT07-115X prioritizes low noise. Its fan operates at just 26.0 decibels. The 80mm PWM fan ensures steady airflow without loud sounds. The low-profile design allows it to fit into cases with limited height. This makes it ideal for users who need silent performance on older Intel motherboards without sacrificing cooling efficiency.
The products compared
SilverStone 80mm Low-Profile CPU Cooler
Best for: Small form factor builds with older Intel CPUs
- Socket Compatibility
- LGA 1156/1155/1150
- Cooler Height
- 23mm
- Tower Design
- Low Profile
- Fan Size
- 80mm
- Dimensions
- 4 × 4 × 3 inches
- Weight
- 8 ounces
View on Amazon: SilverStone 80mm Low-Profile CPU Cooler Affiliate link
This Silverstone cooler fits tight cases with a 23mm height. It uses an 80mm PWM fan that moves 28.1 CFM at 26.0 decibels. The base is copper with aluminum fins. It supports Intel LGA 1156, 1155, and 1150 sockets. You get reliable cooling for small form factor builds without loud operation.
Pros
- 23mm low profile design fits small cases
- 80mm PWM fan provides 28.1 CFM airflow
- Operates at a quiet 26.0 decibels
- Copper base with extruded aluminum fins
Cons
- 80mm fan size limits maximum heat dissipation
- Only supports older Intel LGA 115x sockets
- No support for modern AM5 or LGA 1700 sockets
Good fit if
- You build in a low profile chassis
- You use an Intel LGA 1150 or 1155 CPU
- You need quiet operation under 30 decibels
Skip if
- You have a modern Intel LGA 1700 socket
- You use an AMD Ryzen processor
- You need high-end cooling for overclocking
Verdict: Silverstone Low Profile 80mm CPU Cooler is a compact solution for older Intel systems in small cases. It suits users who prioritize case compatibility and low noise over raw thermal performance.
UBJFMAC 2U Server Cooler with 4 Heat Pipes
Best for: Threadripper 2U server builds
- Socket Compatibility
- sWRX8, sTRX4, TR4, SP3
- Heat Pipes
- 4
- TDP Rating
- 280W
- Color
- Black
- Server Height
- 2U
View on Amazon: UBJFMAC 2U Server Cooler with 4 Heat Pipes Affiliate link
This UBJFMAC A26 cooler is built for high-performance Ryzen Threadripper workstations. It handles up to 280W TDP using four heat pipes. The 2U server height design fits into specific rack-mounted cases. It supports sWRX8, sTRX4, TR4, and SP3 sockets. You should choose this if you need a compact, high-capacity air cooler for professional computing tasks.
Pros
- 280W TDP rating for high heat loads
- Four heat pipes for efficient heat transfer
- Supports sWRX8, sTRX4, TR4, and SP3 sockets
- 2U form factor fits server chassis
Cons
- Limited to specific Threadripper socket types
- 2U height restricts use to server cases
- No fan speed control details provided
Good fit if
- You build a Threadripper workstation
- You need a 2U server-compatible cooler
- You require high TDP cooling capacity
Skip if
- You use standard consumer desktop sockets
- You need a standard tower cooler
- You want fan speed adjustment options
Verdict: UBJFMAC A26 2U CPU Cooler is a specialized solution for Threadripper users needing 280W cooling in a 2U chassis. It fits professionals building dense, high-power workstations.
Specifications side by side
| Spec | SilverStone 80mm Low-Profile CPU Cooler | UBJFMAC 2U Server Cooler with 4 Heat Pipes |
|---|---|---|
| Socket Compatibility | LGA 1156/1155/1150 | sWRX8, sTRX4, TR4, SP3 |
| Cooler Height | 23mm | not stated |
| Heat Pipes | not stated | 4 |
| Tower Design | Low Profile | not stated |
| Fan Size | 80mm | not stated |
| TDP Rating | not stated | 280W |
| Color | NT07-115X | Black |
| Server Height | not stated | 2U |
| Dimensions | 4 × 4 × 3 inches | not stated |
| Weight | 8 ounces | not stated |
| Model | NT07-115X | not stated |
| Size | not stated | T17 |
Frequently asked questions
Can the SilverStone cooler fit a modern Intel motherboard?
No, it does not support current sockets. The SilverStone NT07-115X only lists compatibility for LGA 1150 and LGA 1156. These are older Intel platforms from previous generations. You must check your specific motherboard socket before purchasing. It is not suitable for LGA 1700 or LGA 1200 systems.
Is the UBJFMAC cooler suitable for a standard desktop case?
It is designed for 2U server chassis, not standard desktop towers. The UBJFMAC A26 is a specialized solution for Threadripper users in dense, high-power workstations. Its 2U height requires specific server-grade case dimensions. You will need a case built for 2U form factor builds to install this cooler properly.
How many heat pipes does the UBJFMAC cooler have?
The UBJFMAC A26 features four heat pipes. This specification helps it manage the thermal load of Threadripper processors. The cooler is rated for 280W of cooling capacity. The heat pipes transfer heat away from the CPU to the fins for dissipation.
What is the physical size of the SilverStone cooler?
The SilverStone NT07-115X measures 4 inches in width, 4 inches in length, and 3 inches in height. It weighs 8 ounces. The compact dimensions allow it to fit into small form factor builds. The low-profile design prioritizes case compatibility over maximum cooling performance.
Does the UBJFMAC cooler support AM4 sockets?
The provided data does not list AM4 support. The UBJFMAC A26 specifies compatibility with SP3 and sWRX8 sockets. These are AMD workstation platforms. You should verify your socket type against the listed compatibility. It is intended for Threadripper builds rather than mainstream Ryzen systems.
What is the main use case for the SilverStone cooler?
It is best for small form factor builds with older Intel CPUs. The unit suits users who prioritize case compatibility and low noise. It is a compact solution for legacy systems. You should choose this if you have limited space and an older Intel processor that uses LGA 1150 or 1156.
What color is the UBJFMAC cooler?
The UBJFMAC A26 is black. The product specifications list the color as black. This finish is typical for server and workstation components. The color does not affect thermal performance but matches standard rack-mounted equipment aesthetics.
Which brand is better for Threadripper 2U builds?
The UBJFMAC cooler is the appropriate choice for Threadripper 2U builds. It is a specialized solution designed for this specific hardware configuration. The SilverStone unit targets older Intel sockets and small cases. You need the UBJFMAC A26 to fit the 2U chassis and support the Threadripper processor requirements.