SilverStone vs MITXPC CPU Coolers: Which Brand Fits You?
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing a SilverStone vs MITXPC CPU cooler for distinct system builds. Both units are compact air coolers designed for small form factor cases. The SilverStone NT07-115X targets older Intel sockets with a low-profile design. The MITXPC Dynatron A38 supports AMD Threadripper and EPYC sockets with a side-fan configuration. One fits legacy desktops; the other handles high-end workstation power.
Key differences
| Aspect | SilverStone 80mm Low-Profile CPU Cooler | Dynatron Aluminum Side-Fan CPU Cooler |
|---|---|---|
| Socket Compatibility | LGA 1156/1155/1150 | sTRX4, TR4, SP3 |
| Tower Design | Low Profile | Side-Fan |
| TDP Rating | not listed | 280W |
| Fan Size | 80mm | not listed |
| Heatsink Material | Copper center and base with extruded aluminum fins | Aluminum |
Which one should you choose?
Choose SilverStone 80mm Low-Profile CPU Cooler if
- You are building a compact system with an Intel LGA115x processor.
- You need a cooler under 23mm tall to fit tight cases.
- You prefer a copper base for better heat transfer on older chips.
Choose Dynatron Aluminum Side-Fan CPU Cooler if
- You are using a Threadripper or EPYC workstation CPU.
- You need a cooler rated for high TDP loads up to 280W.
- You want pre-applied thermal grease for easier installation.
Verdict: Choose the SilverStone unit if you are upgrading an older Intel system with strict height limits. Pick the MITXPC Dynatron if you need serious cooling power for a high-TDP AMD workstation. The specs clearly separate these two for different generations of hardware.
Specs and Build Comparison
Socket Compatibility
The SilverStone NT07-115X supports Intel LGA 1156, 1155, and 1150 sockets. It is built for older mainstream Intel platforms. The MITXPC Dynatron A38 supports AMD sTRX4, TR4, and SP3 sockets. These are high-end Threadripper and EPYC platforms. You must match your motherboard socket to the cooler. These two products target completely different processor families. One fits legacy Intel systems. The other fits modern AMD workstation systems. They are not interchangeable. Choose based on your CPU socket type.
Tower Design
The SilverStone NT07-115X has a low-profile tower design. It stands only 23mm tall. This allows it to fit in slim cases. The MITXPC Dynatron A38 has a side-fan tower design. It measures 4.69 inches by 3.11 inches by 2.56 inches. This is a standard vertical block shape. The SilverStone is for ultra-compact builds. The MITXPC is for standard small form factor cases. The height difference is significant for case selection.
Fan Size
The SilverStone NT07-115X uses a custom 80mm PWM fan. It moves 28.1 CFM of air. The noise level is 26.0 decibels. The MITXPC Dynatron A38 includes a fan, but the exact size is not listed in the data. It is likely a standard 92mm or 120mm fan given the heatsink size. The SilverStone fan is smaller but optimized for low noise. The MITXPC fan size is unknown, so direct comparison is limited.
Heat Dissipation
The MITXPC Dynatron A38 is rated for up to 280W TDP. It uses an aluminum heatsink with heatpipes. This handles high-power Threadripper processors. The SilverStone NT07-115X has no TDP rating listed. It uses a copper center and base with extruded aluminum fins. It is designed for lower-power older Intel CPUs. The MITXPC handles much higher heat loads. The SilverStone is for modest cooling needs.
Build Materials
The SilverStone NT07-115X uses a copper center and base. It pairs this with extruded aluminum fins. This combination improves heat transfer from the CPU. The MITXPC Dynatron A38 uses an aluminum heatsink with heatpipes. It also includes pre-applied Shin-Etsu 7762 thermal grease. The SilverStone relies on copper for the base. The MITXPC relies on heatpipes for distribution. Both use aluminum fins for surface area.
Which CPU Cooler Fits Your Build
Owner of older Intel LGA 115x system
The SilverStone NT07-115X supports LGA 1156, 1155, and 1150 sockets. Its 23mm height fits low-profile cases. The 80mm PWM fan moves 28.1 CFM of air. Noise stays at 26.0 decibels. Copper base and aluminum fins handle heat. This cooler matches your specific Intel platform needs.
Builder using Threadripper or EPYC CPUs
The MITXPC Dynatron A38 supports sTRX4, TR4, and SP3 sockets. It handles up to 280W TDP. The aluminum heatsink includes heatpipes for efficiency. Pre-applied Shin-Etsu 7762 grease simplifies installation. The side fan design fits compact builds. This unit is essential for your high-end AMD processor setup.
User needing high heat dissipation capacity
The Dynatron A38 is rated for 280W TDP. This capacity suits power-hungry CPUs. The aluminum construction with heatpipes aids thermal transfer. The side fan configuration optimizes airflow in tight spaces. You get robust cooling for demanding workloads. This spec makes it the better choice for high-performance systems.
The products compared
SilverStone 80mm Low-Profile CPU Cooler
Best for: Intel LGA 115x low-profile builds
- Socket Compatibility
- LGA 1156/1155/1150
- Cooler Height
- 23mm
- Tower Design
- Low Profile
- Fan Size
- 80mm
- Dimensions
- 4 × 4 × 3 inches
- Weight
- 8 ounces
View on Amazon: SilverStone 80mm Low-Profile CPU Cooler Affiliate link
This SilverStone cooler is built for tight cases, standing only 23mm tall. It uses an 80mm PWM fan to move 28.1 CFM of air. The unit combines a copper base with extruded aluminum fins. It fits Intel LGA 1156, 1155, and 1150 sockets. You get a quiet 26.0 decibel operation. This design suits users who need low profile cooling for older Intel platforms.
Pros
- Ultra-slim 23mm height fits low-profile cases
- Copper center and base for heat transfer
- 80mm PWM fan provides 28.1 CFM airflow
- Quiet operation at 26.0 decibels
Cons
- Limited to Intel LGA 115x socket series
- 80mm fan size may not fit all cases
- Extruded aluminum fins offer less surface area than copper
Good fit if
- You need a cooler under 30mm tall
- You use an Intel LGA 1150 or 1155 CPU
- You prioritize low noise over maximum cooling power
Skip if
- You use AMD or newer Intel sockets
- You require a standard 120mm or 140mm fan
- You need a cooler taller than 3 inches
Verdict: Silverstone NT07-115X 23mm Slim Cooler is a specialized solution for Intel LGA 115x processors in compact builds. It delivers quiet performance for users constrained by case height.
Dynatron Aluminum Side-Fan CPU Cooler
Best for: Threadripper and EPYC workstation builds
- Socket Compatibility
- sTRX4, TR4, SP3
- TDP Rating
- 280W
- Material
- Aluminum
- Features
- Fan
- Dimensions
- 6 × 4 × 3 inches
View on Amazon: Dynatron Aluminum Side-Fan CPU Cooler Affiliate link
This aluminum heatsink supports Threadripper and EPYC processors via sTRX4, TR4, and SP3 sockets. It handles up to 280W TDP with a side-mounted fan. The unit measures 4.69 by 3.11 by 2.56 inches. It includes pre-applied Shin-Etsu 7762 thermal grease. You get a compact solution for high-performance workstation builds without needing complex installation steps.
Pros
- Supports sTRX4, TR4, and SP3 sockets
- Rated for 280W TDP
- Includes pre-applied Shin-Etsu 7762 thermal grease
- Aluminum heatsink with side fan design
Cons
- Aluminum construction may offer less thermal mass than copper
- Side fan limits airflow direction compared to top-mounted fans
- Limited socket compatibility excludes standard desktop AM4 or LGA 1700
Good fit if
- You need a cooler for Threadripper or EPYC systems
- You want a compact profile for small form factor workstations
- You prefer pre-applied thermal paste for easier installation
Skip if
- You use standard consumer desktop sockets like LGA 1700
- You require copper heatpipes for maximum cooling performance
- You need compatibility with mainstream AM4 motherboards
Verdict: MITXPC Dynatron A38 Aluminum Cooler fits Threadripper and EPYC builds needing 280W cooling in a small footprint. It suits users who prioritize socket support over premium materials.
Specifications side by side
| Spec | SilverStone 80mm Low-Profile CPU Cooler | Dynatron Aluminum Side-Fan CPU Cooler |
|---|---|---|
| Socket Compatibility | LGA 1156/1155/1150 | sTRX4, TR4, SP3 |
| Cooler Height | 23mm | not stated |
| Tower Design | Low Profile | not stated |
| Fan Size | 80mm | not stated |
| TDP Rating | not stated | 280W |
| Material | not stated | Aluminum |
| Features | not stated | Fan |
| Dimensions | 4 × 4 × 3 inches | 6 × 4 × 3 inches |
| Weight | 8 ounces | not stated |
| Color | NT07-115X | not stated |
| Model | NT07-115X | A38 |
Frequently asked questions
Can the SilverStone NT07-115X fit in a standard ATX case?
Yes, it fits in standard ATX cases. The unit measures 4 inches wide, 3 inches high, and 4 inches long. Its low-profile design allows it to clear tall RAM sticks. You can install it on older Intel LGA 1150 and LGA 1156 sockets without height restrictions.
Does the MITXPC Dynatron A38 work with modern Intel CPUs?
No, it does not support modern Intel CPUs. The Dynatron A38 is designed for AMD SP3 and sTRX4 sockets. These are used for Threadripper and EPYC processors. You need an AMD workstation platform for this cooler to mount correctly. It lacks compatibility with LGA sockets.
Which cooler is better for a compact Threadripper build?
The MITXPC Dynatron A38 is the better choice. It supports SP3 and sTRX4 sockets required for Threadripper. The SilverStone NT07-115X only supports older Intel LGA 115x sockets. You cannot mount the SilverStone unit on AMD workstation platforms. The MITXPC unit handles high thermal loads in small footprints.
How tall is the SilverStone NT07-115X cooler?
The SilverStone NT07-115X is 3 inches tall. This low profile helps it fit in small form factor cases. The width and length are both 4 inches. It weighs 8 ounces. This slim design is ideal for systems with strict height constraints.
Is the MITXPC Dynatron A38 made of aluminum?
Yes, the MITXPC Dynatron A38 is made of aluminum. This material choice helps with heat dissipation. The cooler includes a fan for active cooling. It measures 6 inches in length, 4 inches in width, and 3 inches in height. The aluminum construction suits high-wattage EPYC and Threadripper builds.
Can I use the SilverStone cooler on a Ryzen system?
No, you cannot use the SilverStone NT07-115X on Ryzen systems. It only supports Intel LGA 1150 and LGA 1156 sockets. Ryzen processors use AM4 or AM5 sockets. You need a cooler compatible with AMD sockets. The MITXPC Dynatron A38 supports AMD SP3 and sTRX4, but not standard consumer Ryzen sockets.