SilverStone vs AMD CPU Coolers: Which Brand Fits You?
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Choosing between a SilverStone and AMD CPU cooler depends on your motherboard socket and case size. Both brands offer low-profile solutions for compact builds. The SilverStone NT07-115X targets Intel LGA 115x sockets with a 23mm height. The AMD Wraith Stealth supports AM4 sockets with a 3.93-inch fan. You must match the cooler to your specific socket type. Case clearance also dictates which unit fits your chassis.
Key differences
| Aspect | SilverStone 80mm Low-Profile CPU Cooler | AMD Wraith Stealth Slim AM4 CPU Cooler |
|---|---|---|
| Socket Compatibility | LGA 1156/1155/1150 | AM4 |
| Tower Design | Low Profile | Slim |
| Fan Size | 80mm | 90mm |
| Heatsink Material | Copper center and base with extruded aluminum fins | Aluminum |
| Thermal Paste | Not listed | Pre-applied |
Which one should you choose?
Choose SilverStone 80mm Low-Profile CPU Cooler if
- You use an Intel LGA 115x motherboard.
- Your case has less than 23mm of CPU cooler clearance.
- You prefer a copper heat spreader for better heat transfer.
Choose AMD Wraith Stealth Slim AM4 CPU Cooler if
- You use an AMD AM4 motherboard.
- You want a cooler with pre-applied thermal paste for easier installation.
- You need a slightly larger 90mm fan for airflow.
Verdict: Select the SilverStone cooler if you are building an Intel system with strict height limits. Choose the AMD Wraith Stealth if you are using an AM4 socket and want a straightforward installation with pre-applied paste. Match your choice to your specific socket and case dimensions.
SilverStone vs AMD Cooler Specs
socket compatibility
Your motherboard socket dictates which cooler you can install. The SilverStone NT07-115X is built specifically for Intel LGA 1156, 1155, and 1150 platforms. It does not support AMD sockets. The AMD Wraith Stealth is designed exclusively for AM4 motherboards. It cannot be mounted on Intel boards. You must choose based on your existing CPU socket. The brands do not overlap in their primary compatibility. This creates a clear split for buyers with specific platforms.
tower design
Case clearance is critical for low-profile builds. The SilverStone NT07-115X stands at only 23mm tall. This extreme slimness allows it to fit in very tight cases where standard coolers fail. The AMD Wraith Stealth has a height of 1.97 inches, which equals approximately 50mm. While still compact, it is more than twice as tall as the SilverStone unit. If your case has minimal CPU cooler height clearance, the SilverStone design offers superior physical compatibility for ultra-slim chassis.
fan size
Fan dimensions affect airflow and noise characteristics. The SilverStone NT07-115X uses a custom 80mm PWM fan. The AMD Wraith Stealth features a 90mm fan, which is slightly larger. A larger fan can often move more air at lower speeds, potentially reducing noise. The SilverStone unit specifies an airflow of 28.1 CFM and a noise level of 26.0 decibels. The AMD cooler does not list specific CFM or decibel ratings in the provided data. The larger fan size of the AMD unit may offer better acoustic performance, though exact metrics are unavailable.
material
Cooling efficiency depends on the heatsink materials used. The SilverStone NT07-115X combines a copper center and base with extruded aluminum fins. Copper conducts heat away from the CPU faster than aluminum alone. The AMD Wraith Stealth uses an aluminum heatsink. Aluminum is lighter and cheaper but less efficient at heat transfer than copper. For users prioritizing maximum thermal conductivity, the copper base in the SilverStone unit provides a technical advantage in material composition over the all-aluminum AMD design.
thermal paste
Pre-applied thermal paste simplifies installation. The AMD Wraith Stealth comes with pre-applied thermal paste on the base. This ensures immediate contact and proper application without user effort. The SilverStone NT07-115X data does not mention pre-applied thermal paste. You would likely need to apply your own paste during installation. This adds a step to the setup process. For users who want a plug-and-play experience without handling thermal compounds, the AMD cooler offers a clear convenience advantage.
Which CPU Cooler Should You Buy
Intel LGA 115x user with a tiny case
You need a cooler for Intel LGA 1156, 1155, or 1150 sockets. This SilverStone unit is only 23mm tall, fitting into tight low-profile cases. It uses an 80mm fan that moves 28.1 CFM of air. The noise level stays at 26.0 decibels. This makes it a practical choice for small form factor builds.
AM4 platform owner seeking a standard solution
Your motherboard uses the AM4 socket. This AMD cooler is designed specifically for this platform. It features a 90mm fan with a 3.93-inch diameter. The aluminum heatsink includes pre-applied thermal paste. Direct screw mounting simplifies installation. This is the logical choice for AM4 systems without needing third-party hardware.
Builder prioritizing quiet operation in small spaces
Noise matters in your setup. The SilverStone cooler lists a noise level of 26.0 decibels. It pairs this with an 80mm PWM fan for airflow. The low profile design ensures it fits in compact chassis. If you value quiet performance alongside space efficiency, this spec-focused option meets your needs effectively.
The products compared
SilverStone 80mm Low-Profile CPU Cooler
Best for: small form factor Intel builds
- Socket Compatibility
- LGA 1156/1155/1150
- Cooler Height
- 23mm
- Tower Design
- Low Profile
- Fan Size
- 80mm
- Dimensions
- 4 × 4 × 3 inches
- Weight
- 8 ounces
View on Amazon: SilverStone 80mm Low-Profile CPU Cooler Affiliate link
This Silverstone cooler is built for tight cases, standing just 23mm tall. It uses a custom 80mm PWM fan to move 28.1 CFM of air. The noise level sits at 26.0 decibels. It pairs a copper base with extruded aluminum fins. You get support for Intel LGA 1156, 1155, and 1150 sockets. This setup fits small form factor builds where height is the main constraint.
Pros
- Ultra-slim 23mm height fits low-profile cases
- Copper center and base for heat transfer
- 80mm PWM fan moves 28.1 CFM
- Quiet operation at 26.0 decibels
- Compatible with LGA 1156, 1155, and 1150
Cons
- 80mm fan size limits total airflow potential
- Limited to Intel LGA 115x sockets only
- Small fin surface area compared to tower coolers
Good fit if
- You need a cooler under 25mm tall
- You use an Intel LGA 115x processor
- You prioritize low noise in a small case
Skip if
- You require AMD socket support
- You need high airflow for overclocking
- You have a standard ATX case with height limits
Verdict: Silverstone NT07-115X 23mm Low Profile Cooler is a specialized solution for Intel LGA 115x users in compact cases. It delivers quiet cooling where space is tight, but it does not offer the thermal headroom of larger towers.
AMD Wraith Stealth Slim AM4 CPU Cooler
Best for: Compact AM4 builds with low clearance
- Socket Compatibility
- AM4
- Fan Size
- 90mm
- Material
- Aluminum
- Features
- Fan
- Dimensions
- 1.97 × 4.72 × 4.72 inches
View on Amazon: AMD Wraith Stealth Slim AM4 CPU Cooler Affiliate link
The AMD Wraith Stealth is a slim aluminum cooler designed for Socket AM4. It features a 90mm fan measuring 3.93 inches wide and 1.97 inches tall. The heatsink includes pre-applied thermal paste for easy installation. You get a direct screw mount for stability. This compact unit suits small cases where space is tight. It is a basic solution for standard AM4 processors.
Pros
- Aluminum heatsink with pre-applied thermal paste
- Direct screw mounting for Socket AM4
- 90mm fan with 4-pin PWM connector
- Slim 1.97-inch height fits tight spaces
Cons
- Small 90mm fan limits cooling performance
- Aluminum material offers less thermal mass than copper
- No RGB lighting or aesthetic customization
Good fit if
- You need a low-profile cooler for Socket AM4
- You have a small case with height restrictions
- You want a simple plug-and-play installation
Skip if
- You require high-end cooling for overclocking
- You prefer larger 120mm or 140mm fans
- You want RGB lighting effects
Verdict: AMD Wraith Stealth AM4 90mm Fan is a functional, space-saving cooler for basic AM4 builds. It fits users who prioritize compact dimensions over maximum cooling power.
Specifications side by side
| Spec | SilverStone 80mm Low-Profile CPU Cooler | AMD Wraith Stealth Slim AM4 CPU Cooler |
|---|---|---|
| Socket Compatibility | LGA 1156/1155/1150 | AM4 |
| Cooler Height | 23mm | not stated |
| Tower Design | Low Profile | not stated |
| Fan Size | 80mm | 90mm |
| Material | not stated | Aluminum |
| Features | not stated | Fan |
| Dimensions | 4 × 4 × 3 inches | 1.97 × 4.72 × 4.72 inches |
| Weight | 8 ounces | not stated |
| Color | NT07-115X | Black |
| Model | NT07-115X | 712-000052 |
| Size | not stated | 3.93 Inch |
Frequently asked questions
Can I use the SilverStone NT07-115X on an AMD motherboard?
No, you cannot use this cooler on AMD motherboards. The SilverStone NT07-115X is designed exclusively for Intel LGA 1150 and LGA 1156 sockets. It does not support AM4 or other AMD platforms. If you have an AMD system, you need a cooler with compatible mounting hardware for your specific socket type.
Is the AMD Wraith Stealth compatible with Intel processors?
No, the AMD Wraith Stealth is not compatible with Intel processors. It is built specifically for the AM4 socket platform. You cannot mount this cooler on Intel motherboards like those using LGA 115x sockets. You must choose a cooler that matches your processor's socket interface.
Which cooler is better for a very small ITX case?
Both options are designed for compact builds, but they serve different platforms. The SilverStone NT07-115X is a 23mm low-profile unit for Intel LGA 115x. The AMD Wraith Stealth is a slim 3.93-inch cooler for AM4. Choose the one that fits your motherboard socket and case height limits.
Does the AMD Wraith Stealth include a fan?
Yes, the AMD Wraith Stealth includes a fan. It is listed as a functional cooler with an integrated 90mm fan. This fan helps dissipate heat from the aluminum heatsink. It is a complete unit ready for installation on compatible AM4 motherboards.
What is the height of the SilverStone NT07-115X?
The SilverStone NT07-115X has a height of 3 inches, which corresponds to its 23mm low-profile design. This slim profile allows it to fit into cases with limited CPU clearance. It is ideal for users who need a compact solution for Intel LGA 115x systems.
What material is the AMD Wraith Stealth heatsink made of?
The AMD Wraith Stealth heatsink is made of aluminum. This material helps conduct heat away from the processor. The cooler also features a black finish and includes a fan for active cooling. It is a straightforward, space-saving solution for basic AM4 builds.