SilverStone 80mm Low-Profile CPU Cooler vs SilverStone 54mm Low-Profile AMD CPU Cooler (2026): Key Differences
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing the silverstone tek super slim profile CPU cooler vs technology low profile AMD solution for small form factor builds. Both units feature 80mm fans and low-profile designs to fit tight cases. The main difference lies in their target platforms. The first option supports specific Intel sockets, while the second is built exclusively for AMD processors. Each uses a compact tower design to maximize airflow in constrained spaces without blocking nearby components.
Key differences
| Aspect | SilverStone 80mm Low-Profile CPU Cooler | SilverStone 54mm Low-Profile AMD CPU Cooler |
|---|---|---|
| Socket Compatibility | LGA 1156/1155/1150 | AM2/AM3/AM4/FM1/FM2 |
| Cooler Height | 23mm | 54mm |
| Heat Pipes | Not listed | 2 |
| TDP Rating | Not listed | 95W or more |
| Weight | 8 ounces | 6.4 ounces |
Which one should you choose?
Choose SilverStone 80mm Low-Profile CPU Cooler if
- You need a cooler for Intel LGA 115x motherboards
- Your case height is extremely limited to 23mm
Choose SilverStone 54mm Low-Profile AMD CPU Cooler if
- You are building an AMD system with AM2 to AM4 sockets
- You require a TDP rating of 95W or higher
Verdict: Choose the SilverStone Tek if you are using an Intel LGA 115x processor and have minimal vertical clearance. Select the SilverStone Technology model for AMD builds requiring heat pipe efficiency and support for higher TDP CPUs. Both options provide reliable low-profile cooling for their respective platforms.
Socket and Height Comparison
Socket Compatibility
Platform support is the primary differentiator here. The SilverStone Tek Super Slim Profile CPU Cooler supports Intel LGA 1156, 1155, and 1150 sockets. This makes it a direct fit for older Intel desktop systems. In contrast, the SilverStone 54mm Low-Profile AMD CPU Cooler is designed exclusively for AMD platforms. It supports AM2, AM3, AM4, FM1, and FM2 sockets. You must choose the correct unit based on your motherboard socket type. Using the wrong cooler will result in physical incompatibility with your CPU mounting holes. There is no cross-platform flexibility between these two specific models.
Cooler Height
Case clearance requirements differ significantly between these two low-profile solutions. The SilverStone Tek Super Slim Profile CPU Cooler stands at just 23mm tall. This extreme thinness allows it to fit into very tight chassis where space is extremely limited. The SilverStone 54mm Low-Profile AMD CPU Cooler is taller, measuring 54mm from the base to the top of the fan. While still low-profile, it requires more vertical clearance in your case. If you are building in a mini-ITX case with strict height limits, the 23mm model offers more flexibility. The 54mm model is suitable for cases that can accommodate slightly taller components.
Heat Pipe Construction
Thermal transfer mechanisms vary in complexity. The SilverStone 54mm Low-Profile AMD CPU Cooler utilizes two 6mm heat pipes. These pipes help move heat away from the CPU base and into the aluminum fin stack efficiently. The product data for the SilverStone Tek Super Slim Profile CPU Cooler does not explicitly list heat pipes. It mentions a copper center and base with extruded aluminum fins. This suggests a different thermal design, possibly relying more on direct contact or a simpler conductive path. The presence of heat pipes in the AMD model typically aids in spreading heat over a larger surface area for dissipation.
Fan Specifications
Both coolers use an 80mm PWM fan, which is standard for low-profile builds. However, the performance metrics differ. The SilverStone Tek Super Slim Profile CPU Cooler specifies an airflow of 28.1 CFM and a noise level of 26.0 decibels. The SilverStone 54mm Low-Profile AMD CPU Cooler includes a dual ball bearing fan for durability but does not list specific CFM or decibel ratings in the provided data. The dual ball bearing design in the AMD model often implies longer lifespan under continuous operation. Without specific noise or airflow numbers for the AMD unit, you cannot directly compare efficiency, though both aim for quiet operation in small cases.
TDP Rating
Power handling capability is a key consideration for thermal performance. The SilverStone 54mm Low-Profile AMD CPU Cooler is rated for CPUs with a TDP of 95W or more. This suggests it can handle moderate to high power draw processors on AMD platforms. The SilverStone Tek Super Slim Profile CPU Cooler does not list a specific TDP rating in its specifications. Given its extremely low height of 23mm, it is likely intended for lower power CPUs or office-class processors. If you are running a high-performance CPU that generates significant heat, the 95W-rated AMD cooler is the safer choice for thermal headroom.
Choose the right cooler for your build
Intel LGA115x system owner needing minimal height
You need a cooler for older Intel platforms like LGA 1150 or 1156. This unit stands only 23mm tall, making it ideal for tight cases. It uses an 80mm PWM fan that moves 28.1 CFM of air while staying under 26.0 decibels. The copper base and aluminum fins provide efficient heat transfer for standard desktop processors.
AMD AM4 builder requiring higher heat dissipation
Your AMD system on sockets like AM4 or AM3 needs to handle 95W or more TDP. This cooler features two 6mm heat pipes for better conductivity than simple base contact. It includes an 80mm fan with dual ball bearings for durability. The 54mm height fits most small form factor cases while offering superior thermal performance for modern AMD chips.
User prioritizing quiet operation in small chassis
Noise levels matter in small builds. This Intel-specific cooler lists a noise output of 26.0 decibels, which is relatively quiet for its class. It relies on a custom 80mm PWM fan to balance airflow and sound. If you are building with LGA 1155 or 1156 hardware, this low-profile option keeps your system quiet without sacrificing cooling efficiency.
The products compared
SilverStone 80mm Low-Profile CPU Cooler
Best for: Old Intel LGA 115x low-profile builds
- Socket Compatibility
- LGA 1156/1155/1150
- Cooler Height
- 23mm
- Tower Design
- Low Profile
- Fan Size
- 80mm
- Dimensions
- 4 × 4 × 3 inches
- Weight
- 8 ounces
View on Amazon: SilverStone 80mm Low-Profile CPU Cooler Affiliate link
This SilverStone cooler is built for low-profile systems, standing just 23mm tall. It uses an 80mm PWM fan to move 28.1 CFM of air while keeping noise at 26.0 decibels. The design features a copper center and base with extruded aluminum fins for efficient heat transfer. It supports Intel LGA 1156, 1155, and 1150 sockets. You will find this unit suitable for compact builds where height is the primary constraint.
Pros
- Ultra-slim 23mm height fits tight cases
- 80mm PWM fan provides 28.1 CFM airflow
- Copper center and base with aluminum fins
- Low 26.0 decibel noise level
Cons
- Limited to Intel LGA 115x sockets only
- Smaller 80mm fan may struggle with high heat loads
- No support for modern AMD AM4/AM5 sockets
Good fit if
- You need a cooler under 25mm tall
- You use an older Intel LGA 115x motherboard
- You prioritize low noise in a small form factor
Skip if
- You use an AMD AM4 or AM5 processor
- You need a cooler taller than 30mm
- You require support for LGA 1700 sockets
Verdict: SilverStone 80mm Low-Profile CPU Cooler is a specialized solution for users with strict height limits on older Intel platforms. It fits builders who need quiet operation in a tiny chassis but must avoid it if you have modern AMD or newer Intel sockets.
SilverStone 54mm Low-Profile AMD CPU Cooler
Best for: Low-profile AMD builds under 95W
- Socket Compatibility
- AM2, AM3, AM4, FM1, FM2
- Cooler Height
- 54mm
- Heat Pipes
- 2
- Tower Design
- Low-Profile
- Fan Size
- 80mm
- TDP Rating
- 95W or more
View on Amazon: SilverStone 54mm Low-Profile AMD CPU Cooler Affiliate link
This SilverStone cooler stands 54mm tall, making it a low-profile solution for AMD systems. It uses two 6mm heat pipes and an 80mm PWM fan with dual ball bearings to handle CPUs up to 95W or more. It fits AM2, AM3, AM4, FM1, and FM2 sockets. You should choose this if your case height is limited but you need reliable cooling for standard desktop processors.
Pros
- 54mm height fits tight cases
- Two 6mm heat pipes for heat transfer
- 80mm PWM fan with dual ball bearings
- Supports AMD sockets AM2 through AM4
Cons
- 80mm fan is smaller than standard 120mm or 140mm options
- Limited to 95W TDP for CPU power
- Only compatible with AMD sockets
Good fit if
- You have a low-profile case with limited height
- You use an AMD processor under 95W
- You need a compact cooler for small builds
Skip if
- You use an Intel CPU
- Your CPU exceeds 95W TDP
- You require high airflow from larger fans
Verdict: SilverStone 54mm Low-Profile AMD CPU Cooler is a practical choice for AMD builds where case height is the main constraint. It delivers adequate cooling for standard 95W processors in a compact form factor.
Specifications side by side
| Spec | SilverStone 80mm Low-Profile CPU Cooler | SilverStone 54mm Low-Profile AMD CPU Cooler |
|---|---|---|
| Socket Compatibility | LGA 1156/1155/1150 | AM2, AM3, AM4, FM1, FM2 |
| Cooler Height | 23mm | 54mm |
| Heat Pipes | not stated | 2 |
| Tower Design | Low Profile | Low-Profile |
| Fan Size | 80mm | 80mm |
| TDP Rating | not stated | 95W or more |
| Dimensions | 4 × 4 × 3 inches | 4.21 × 3.23 × 2.13 inches |
| Weight | 8 ounces | 6.4 ounces |
| Color | NT07-115X | KR01 - 54mm tall (AMD ONLY) |
| Model | NT07-115X | RL-KR01 |
| Size | not stated | Low Profile Cooler |
Frequently asked questions
Which cooler fits older Intel motherboards?
The SilverStone 80mm Low-Profile CPU Cooler fits older Intel platforms. It supports LGA 1150 and LGA 1156 sockets. This makes it the correct choice for legacy systems. The AMD-focused model does not support these Intel sockets. You must match the socket type to your motherboard before purchasing.
Does the 54mm cooler work with Intel CPUs?
No, the SilverStone 54mm Low-Profile AMD CPU Cooler is designed for AMD sockets only. It supports the AM4 platform. It will not fit LGA 115x motherboards. If you have an Intel processor, you need the 80mm model instead. Using the wrong cooler will result in compatibility issues.
How tall is the SilverStone 54mm cooler?
The SilverStone 54mm Low-Profile AMD CPU Cooler stands 2.13 inches tall. This low profile helps it fit in small cases. The 80mm model is slightly taller at 3 inches. Both are designed for tight spaces, but the 54mm option offers the most vertical clearance.
Which cooler is lighter?
The SilverStone 54mm Low-Profile AMD CPU Cooler is lighter. It weighs 6.4 ounces. The SilverStone 80mm Low-Profile CPU Cooler weighs 8 ounces. The weight difference is small, but the AMD model is the lighter option. This may matter slightly for motherboards with fragile socket retention mechanisms.
What is the model number for the AMD cooler?
The model number for the SilverStone 54mm Low-Profile AMD CPU Cooler is RL-KR01. The other cooler uses the model number NT07-115X. Knowing the model number helps you find replacement parts or verify compatibility. Always check the model number on your box before buying.
Can I use the 80mm cooler on an AM4 board?
No, you cannot use the SilverStone 80mm Low-Profile CPU Cooler on an AM4 board. It only supports LGA 1150 and LGA 1156 sockets. The mounting hardware is specific to those Intel platforms. You must use the 54mm cooler for AMD AM4 processors.
What is the width of the AMD cooler?
The SilverStone 54mm Low-Profile AMD CPU Cooler has a width of 3.23 inches. The 80mm model is 4 inches wide. The AMD cooler is narrower, which may help with clearance around RAM sticks or other components on the motherboard.