SilverStone 80mm Low-Profile CPU Cooler Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This silverstone tek super slim profile CPU cooler review focuses on the NT07-115X model. It is a low-profile air cooler designed for compact builds. The defining specs are its 23mm height and 80mm PWM fan. These features allow it to fit into small form factor cases where standard towers will not. It uses a copper base with extruded aluminum fins for heat transfer. The unit weighs 8 ounces and measures 4 by 4 by 3 inches. You get 28.1 CFM of airflow with a noise level of 26.0 decibels. This cooler targets users who need cooling in tight spaces.
What stands out
- 23mm low profile height for small cases
- 80mm PWM fan for adjustable speed control
- Copper center and base with aluminum fins
- Supports Intel LGA 1156, 1155, and 1150 sockets
Who it fits
Good fit for
You should choose this cooler if you are building an HTPC or a small form factor PC. The 23mm height is critical for cases with low RAM clearance. It suits systems using Intel LGA 115x processors. If your case cannot accommodate a standard tower, this is a practical alternative. The PWM fan allows you to balance noise and cooling performance. It is ideal for office PCs or media centers where space is limited.
Who should skip it
Skip this model if you use a modern Intel socket like LGA 1700 or AMD AM4. The data only lists support for LGA 1156, 1155, and 1150. You will not find compatibility with newer platforms in this listing. Also, avoid it if you need high-end gaming performance. The 80mm fan and low-profile design limit airflow compared to larger towers. Users seeking maximum thermal headroom should look elsewhere.
Verdict: This cooler is a functional solution for older Intel sockets in tight cases. It delivers basic cooling where space is the primary constraint.
Key specs explained for this cooler
Cooler Height: 23mm
This dimension indicates the vertical space the cooler occupies above the CPU socket. At only 23 millimeters tall, it fits into cases with strict RAM clearance limits. You should choose this if your case specifies a maximum cooler height below 35mm. Standard air coolers often exceed 150mm, so this low profile is essential for small form factor builds where space is at a premium.
Fan Size: 80mm
The fan diameter determines the surface area for moving air. An 80mm fan is smaller than the standard 120mm or 140mm fans found on most tower coolers. This size allows the cooler to maintain a low physical profile while still generating airflow. You will need to ensure your case has mounting points for 80mm fans, as this is less common than larger fan sizes in modern mid-tower cases.
Socket Compatibility: LGA 1156/1155/1150
This list shows which Intel processor sockets the mounting hardware supports. It is compatible with older Intel platforms using these specific socket types. You must verify your motherboard uses one of these sockets before purchasing. It does not support newer sockets like LGA 1700 or LGA 1200, so check your CPU generation to ensure proper physical fit and electrical connection for the fan.
Air flow: 28.1 CFM
CFM measures the volume of air the fan moves per minute. A rating of 28.1 CFM is moderate for an 80mm fan. This airflow volume helps dissipate heat from the CPU core. You should compare this figure against other low-profile coolers to gauge thermal potential. Higher CFM generally means better cooling, but it may also increase noise levels, so balance this spec with the decibel rating.
Design and build details
The listing describes a compact tower design with a low-profile form factor. The cooler stands 23 millimeters tall. This height allows it to fit into small cases where RAM clearance is tight. The overall dimensions are four inches wide and four inches long. The base is four inches in width. The unit weighs eight ounces. This light weight reduces stress on the motherboard socket.
Materials play a key role in its performance. The base and center use copper. This material conducts heat away from the processor quickly. The fins are made of extruded aluminum. This construction provides a large surface area for air to pass through. The design pairs these materials with a custom 80mm PWM fan. The fan size matches the tower width. This alignment ensures efficient airflow through the fin stack.
Controls are handled by the PWM fan. This allows the system to adjust speed based on temperature. The listing notes a noise level of 26.0 decibels. This suggests quiet operation during low load. The color is listed as NT07-115X. This is a model code, not a paint finish. The build prioritizes fitment in compact systems over aesthetic customization. You get a functional unit designed for space-constrained environments. The layout is straightforward with no complex tubing or pumps. It relies on passive heat dissipation through its metal structure.
Setup Details and Daily Operation
Installing this cooler centers on specific Intel desktop platforms. The mounting hardware supports LGA 1156, LGA 1155, and LGA 1150 sockets. The product listing describes the unit as easy to install. With a total weight of 8 ounces, the cooler places minimal physical stress on your motherboard during assembly. Its square profile measures 4 inches in length and 4 inches in width, aligning cleanly with compact motherboard layouts.
In everyday operation, active cooling depends on the custom 80mm PWM fan. The pulse-width modulation design allows your motherboard firmware to adjust fan rotation dynamically based on processor load. At maximum rated output, the fan delivers 28.1 CFM of airflow. That forced air circulates through the extruded aluminum fins and dissipates heat from the solid copper base and center core.
Acoustic specifications cite a noise output of 26.0 decibels. In daily desktop use, this sound profile translates to steady, unobtrusive operation inside compact enclosures. You do not get support for other socket families, so routine operation applies strictly to compatible Intel LGA 115X systems. These combined figures provide balanced airflow and manageable acoustics for regular computing tasks.
Before You Buy This Cooler
This cooler is a specialized tool for tight spaces. You must verify your case supports the 23-millimeter height. Standard air coolers are too large for many mini-ITX builds. This unit fits where others cannot. It uses an 80mm fan, which is smaller than typical 120mm or 140mm fans. Smaller fans often spin faster to move the same air. This can increase noise. The listing states a noise level of 26 decibels. You should check if this sound profile works for your quiet PC needs. The fan is PWM controlled. This allows you to adjust speed via your motherboard. You do not need extra software. Keep the aluminum fins dust-free. Dust blocks airflow and reduces cooling. Use compressed air gently. This cooler is not for high-end gaming rigs. It is for compact systems with modest heat output. Compare it with other low-profile options. If you need more cooling power, look for taller towers. If you need silence, check fan curves. This choice is for space, not raw performance.
Check before you buy
- Confirm your case supports 23mm cooler height.
- Check motherboard compatibility with LGA 1150, 1155, or 1156.
- Verify RAM clearance above the CPU socket.
- Ensure your case has space for an 80mm fan.
- Check if 26 decibels is acceptable for your quiet build.
The product at a glance
SilverStone 80mm Low-Profile CPU Cooler
Best for: LGA 1150 low-profile builds
- Socket Compatibility
- LGA 1156/1155/1150
- Cooler Height
- 23mm
- Tower Design
- Low Profile
- Fan Size
- 80mm
- Dimensions
- 4 × 4 × 3 inches
- Weight
- 8 ounces
View on Amazon: SilverStone 80mm Low-Profile CPU Cooler Affiliate link
This SilverStone NT07 is an 80mm air cooler designed for tight cases. It stands only 23mm tall, fitting low-profile builds. The unit moves 28.1 CFM of air at 26.0 decibels. It uses a copper base with extruded aluminum fins. It supports Intel LGA 1156 and 1150 sockets. You get a compact cooling solution for small form factor PCs.
Pros
- Ultra-slim 23mm height fits low-profile cases
- 80mm PWM fan provides 28.1 CFM airflow
- Copper center and base for heat transfer
- Quiet operation at 26.0 decibels
Cons
- Limited to older Intel LGA 1156 and 1150 sockets
- 80mm fan size may not fit all small cases
- Extruded aluminum fins offer less surface area than copper
Good fit if
- You need a cooler under 25mm tall
- You use an LGA 1150 or 1156 motherboard
- You prioritize silence over maximum cooling power
Skip if
- You have a modern LGA 1700 or AM5 socket
- You need to cool high-TDP gaming CPUs
- Your case requires a 120mm fan minimum
Verdict: SilverStone NT07 80mm Low-Profile Cooler fits users with LGA 1150 systems and strict height limits. It delivers quiet cooling for low-power chips in small cases.
Specifications side by side
| Spec | SilverStone 80mm Low-Profile CPU Cooler |
|---|---|
| Socket Compatibility | LGA 1156/1155/1150 |
| Cooler Height | 23mm |
| Tower Design | Low Profile |
| Fan Size | 80mm |
| Dimensions | 4 × 4 × 3 inches |
| Weight | 8 ounces |
| Color | NT07-115X |
| Model | NT07-115X |
Frequently asked questions
Is this cooler compatible with LGA 1151 or LGA 1200 sockets?
No, the SilverStone NT07-115X is not compatible with those modern sockets. The published specifications list support only for LGA 1150 and LGA 1156. You must verify your motherboard socket type before purchasing. This unit is designed for older Intel platforms. It will not fit newer socket designs without adapter kits that are not mentioned in the data.
What are the exact physical dimensions of the SilverStone NT07-115X?
The cooler measures four inches in width, four inches in length, and three inches in height. These dimensions allow it to fit into cases with strict height limits. The compact tower design is ideal for small form factor builds. You should check your case clearance to ensure the three-inch height fits comfortably above the RAM slots.
How much does the SilverStone 80mm low-profile cooler weigh?
The unit weighs eight ounces. This light weight makes it easy to handle during installation. You do not need to worry about excessive stress on the motherboard socket. The modest mass is typical for low-profile coolers. It relies on an 80mm fan and small heatsink fins to move air efficiently within tight spaces.
Can I use this cooler for high-end gaming CPUs?
This cooler is best suited for low-power chips in small cases. The specifications do not list high thermal design power ratings. It is designed for quiet cooling rather than maximum performance. You should choose this if you have an LGA 1150 system with strict height limits. High-end gaming processors may exceed the cooling capacity of this 80mm fan setup.
Does the SilverStone NT07-115X include mounting hardware for installation?
Yes, the listing notes that installation relies on included mounting hardware. It supports Intel LGA 1156, 1155, and 1150 sockets. You will need to ensure your case accommodates the 23-millimeter height. The unit is described as easy to install. Check your motherboard manual for the specific bracket requirements for your socket type.
Is this cooler suitable for mini-ITX builds with tall RAM?
Yes, the low-profile design is ideal for tight spaces. The three-inch height helps avoid interference with tall RAM modules. Standard air coolers are often too large for many mini-ITX builds. This unit fits where others cannot. You should verify that your RAM height does not exceed the available clearance above the CPU socket.