SilverStone 4U LGA 2011/2066 CPU Cooler Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The silverstone technology xe04 4u server workstation CPU cooler provides dedicated cooling for Intel LGA 2011 and 2066 platforms in 4U rackmount systems. Its five 6mm heat pipes and dual ball bearing fan ensure steady heat dissipation for square or narrow socket setups. This configuration works well for specific server builds, but your chassis or socket requirements might differ. You may need a different height, a different socket type, or a passive cooling solution instead.
We selected 6 alternatives because their published specifications overlap with the original. Some options support 2U or 1U form factors for tighter spaces. Others accommodate AMD SP3 sockets instead of Intel LGA. A few choices offer passive designs or different materials. This list compares these specs so you can find the right fit for your hardware. Each pick is ranked by how closely its dimensions and compatibility match your needs.
Our top pick: SilverStone 4U LGA 2011/2066 CPU Cooler.
How each alternative compares
SilverStone 2U LGA4189 Active Cooler
The SilverStone 2U LGA4189 Active Cooler targets a different form factor and socket than the original. It replaces the LGA 2011/2066 support with LGA4189 compatibility, making it suitable for newer server platforms. The physical dimensions shift to a 2U height of 2.56 inches, which is significantly shorter than the 4.96-inch profile of the XE04. Its width is also narrower at 3.07 inches. This model is designed for 2U chassis environments rather than 4U racks. You should choose this if your server build uses the LGA4189 socket and requires a compact 2U footprint. It maintains the SilverStone brand reliability but adapts to a smaller case size and different processor interface.
KLAWKKNI 2U Passive LGA 2011 Cooler
The KLAWKKNI 2U Passive LGA 2011 Cooler offers a distinct cooling approach by removing fans entirely. It is a passive heatsink, meaning it relies on case airflow rather than an integrated fan like the dual ball bearing fan in the original. The height is reduced to 2U, fitting into 2.56 inches of vertical space compared to the 4.96-inch original. It retains LGA 2011 socket compatibility, so it works with the same processors. The inclusion of RGB lighting adds an aesthetic element not present in the utilitarian original. This option is best for builds where noise is a priority or where chassis fans provide sufficient airflow. It sacrifices active cooling performance for silence and a lower profile in 2U systems.
Dynatron 1U Server LGA 2011 CPU Cooler
The Dynatron 1U Server LGA 2011 CPU Cooler is built for the tightest space constraints. It fits into a 1U rackmount slot, with a height of 4.7 inches but a much narrower width of 2.1 inches. This is significantly smaller than the 3.66-inch width of the original 4U model. It uses a vapor chamber base and copper stacked fins for thermal transfer. The cooler supports 150W TDP processors, which is lower than the typical output of the original. It includes a fan for active cooling. You should pick this if your server chassis is limited to 1U height. It provides essential cooling for square-socket LGA 2011 CPUs in ultra-compact environments where the larger 4U cooler simply will not fit.
Noctua 120mm SP3 Threadripper Tower Cooler
The Noctua 120mm SP3 Threadripper Tower Cooler serves AMD processors instead of Intel. It is compatible with Socket SP3 and TR4, unlike the LGA 2011/2066 support of the original. The physical design is a tower cooler with a height of 6.22 inches, which is taller than the 4.96-inch original. It weighs 1.76 pounds, making it heavier than the 1-pound SilverStone unit. This cooler is intended for AMD Threadripper and EPYC workstations. It does not fit Intel LGA sockets. You should choose this if your build uses an AMD TR4 or SP3 processor. It provides dedicated cooling for AMD platforms but requires a chassis that can accommodate its taller tower profile and different socket mounting system.
Noctua NH-U9 Workstation CPU Cooler
The Noctua NH-U9 Workstation CPU Cooler also targets AMD platforms with SP3 socket compatibility. It features a dual fan design with 92mm fans, differing from the single or different fan configuration of the original. The height is 4.92 inches, which is slightly shorter than the 4.96-inch original, allowing for easier clearance in some 4U cases. The width is 4.72 inches, which is wider than the original. It weighs 2.2 pounds, making it heavier than the SilverStone model. This cooler is designed for AMD Threadripper and EPYC processors in 4U server builds. It is not compatible with Intel LGA 2011 or 2066 sockets. Pick this if you need dual-fan airflow for AMD workstations in a 4U form factor.
Acogedor SP3 4U Aluminum Server Cooler
The Acogedor SP3 4U Aluminum Server Cooler is built for AMD EPYC 7000 series processors. It uses Socket SP3, so it is not compatible with the Intel LGA 2011/2066 sockets of the original. The height is 5 inches, which is very close to the 4.96-inch profile of the SilverStone cooler. The width is 3.6 inches, nearly identical to the original. It features an aluminum fin design and includes a fan running at 3800 RPM. This model is designed for 4U server enclosures. You should choose this if your system uses an AMD EPYC processor. It provides active cooling for SP3 platforms in a similar 4U footprint, but it does not support the Intel sockets required by the original product.
Quick picks
Our 7 picks
SilverStone 4U LGA 2011/2066 CPU Cooler
Best for: 4U LGA 2011 and 2066 server builds
- Socket Compatibility
- Intel LGA 2011 / 2066 Square & Narrow
- System Type
- Server, Workstation
- Dimensions
- 4.17 × 3.66 × 4.96 inches
- Weight
- 1 pounds
View on Amazon: SilverStone 4U LGA 2011/2066 CPU Cooler Affiliate link
The SilverStone 4U cooler mounts directly to Intel LGA 2011 and LGA 2066 Square and Narrow sockets. Standing 4.96 inches high and weighing one pound, this heatsink fits inside standard 4U server chassis or desktop workstations. Five 6mm heat pipes transfer heat through aluminum fins alongside a dual ball bearing PWM fan. You get targeted cooling built specifically for rackmount enterprise systems requiring continuous operation.
Pros
- Fits both Square and Narrow Intel LGA 2011 and 2066 sockets
- Five 6mm heat pipes with aluminum fins
- Dual ball bearing PWM-controlled fan
- Compact 4.96-inch height fits 4U server chassis
Cons
- Height of 4.96 inches exceeds clearance for 1U and 2U chassis
- Lacks mounting hardware for AMD sockets or other Intel platforms
Good fit if
- You need a 4U cooler compatible with Intel LGA 2011 or LGA 2066 Square or Narrow sockets.
- You require a dual ball bearing PWM fan for continuous server or workstation duty.
Skip if
- You deploy hardware in low-profile 1U or 2U rackmount enclosures.
- You operate an AMD platform or an Intel socket outside LGA 2011 or 2066.
Verdict: SilverStone 4U LGA 2011/2066 Server CPU Cooler provides dedicated cooling for 4U rackmount servers using Intel LGA 2011 and 2066 platforms. Its five 6mm heat pipes and dual ball bearing fan ensure steady heat dissipation in square or narrow socket setups.
SilverStone 2U LGA4189 Active Cooler
Best for: 2U LGA4189 server and workstation builds
- Socket Compatibility
- LGA4189
- Cooler Height
- 2.56 inches
- Heat Pipes
- 5
- TDP Rating
- 270W
- Fan Speed
- 1,600 ~ 10,000rpm
- System Type
- Server, Workstation
View on Amazon: SilverStone 2U LGA4189 Active Cooler Affiliate link
This is a 2U server and workstation CPU cooler designed for Intel LGA4189 sockets. It uses five 6mm heat pipes with aluminum fins to handle up to 270W TDP. The included fan runs between 1,600 and 10,000 RPM with a 198,000-hour MTTF rating. Its compact dimensions of 3.07 x 2.56 x 4.45 inches fit small form factor builds. You should choose this if you need high reliability and dense heat dissipation for demanding server tasks.
Pros
- Handles up to 270W TDP
- Five 6mm heat pipes for efficient heat transfer
- Fan rated for 198,000 hours MTTF
- Dual ball bearing PWM fan for reliability
Cons
- Limited to Intel LGA4189 socket
- 2U height restricts case compatibility
- Only one fan included for airflow
Good fit if
- You are building a 2U server chassis
- You need a cooler for LGA4189 processors
- You require high TDP support for workstations
Skip if
- You use AMD or Intel sockets other than LGA4189
- You need a 1U or 4U form factor
- You are building a standard desktop PC
Verdict: SilverStone 2U LGA4189 Server Cooler provides robust thermal performance for 2U server builds using LGA4189 sockets. It is the right fit for workstations needing 270W TDP support in a compact footprint.
KLAWKKNI 2U Passive LGA 2011 Cooler
Best for: 2U LGA 2011 builds with RGB lighting
- Socket Compatibility
- LGA 2011
- Lighting
- RGB
- System Type
- Server
- Color
- Black
- Server Height
- 2U
- Cooling Method
- Passive
View on Amazon: KLAWKKNI 2U Passive LGA 2011 Cooler Affiliate link
The KLAWKKNI 2U Passive LGA 2011 Heatsink with RGB is a compact server radiator built for LGA 2011 narrow sockets. It features a passive cooling design intended for 2U chassis with dedicated chassis airflow. Integrated RGB lighting adds illumination to your server board. If you manage a 2U rackmount build requiring LGA 2011 narrow mounting and want onboard RGB accent lighting, this unit fits your server enclosure.
Pros
- Fits 2U server chassis height
- Includes integrated RGB lighting
- Passive design operates without mechanical fan wear
- Compatible with LGA 2011 narrow socket configurations
Cons
- No integrated cooling fan included
- Socket support limited to LGA 2011
Good fit if
- You need a 2U passive heatsink for an LGA 2011 narrow socket.
- You want RGB lighting inside your server enclosure.
- You run a chassis that already provides sufficient directional airflow.
Skip if
- You need an active cooler with an attached fan.
- You use an LGA 2066 or AMD platform.
Verdict: KLAWKKNI 2U Passive LGA 2011 Heatsink with RGB provides a low-profile passive cooling option for LGA 2011 server setups that also include RGB lighting.
Dynatron 1U Server LGA 2011 CPU Cooler
Best for: 1U rackmount LGA 2011 server builds
- Socket Compatibility
- LGA2011
- TDP Rating
- 150 Watts
- System Type
- Server
- Server Height
- 1U
- Features
- Fan
- Dimensions
- 5.4 × 2.1 × 4.7 inches
View on Amazon: Dynatron 1U Server LGA 2011 CPU Cooler Affiliate link
This is a 1U server CPU cooler designed for Intel LGA 2011 square sockets with an 80 by 80 mm mounting pitch. It pairs a vapor chamber base with copper stacked fins and supports processors up to 150 watts TDP, including Intel Sandy Bridge EP and EX chips. It suits your build if you run a dense rackmount setup needing integrated active fan cooling and pre-applied Shin-Etsu G751 thermal paste.
Pros
- Vapor chamber base with copper stacked fins
- Supports CPU power up to 150 watts
- Pre-applied Shin-Etsu G751 thermal compound
- Designed for compact 1U server height
Cons
- Limited strictly to square 80 x 80mm LGA 2011 mounting layouts
- TDP support tops out at 150 watts
Good fit if
- You build or maintain a compact 1U rackmount server.
- You use an Intel Sandy Bridge EP or EX processor on an LGA 2011 square socket.
- You want pre-printed thermal paste ready for immediate deployment.
Skip if
- You have a motherboard using a narrow LGA 2011 mounting pattern.
- You run a high-draw processor rated over 150 watts TDP.
- You need compatibility with non-LGA 2011 processor sockets.
Verdict: Dynatron 1U LGA 2011 Server Cooler provides targeted active thermal management for 150W square-socket processors in low-profile environments. Its copper stacked fins and vapor chamber base make it a dependable choice for space-constrained rack systems.
Noctua 120mm SP3 Threadripper Tower Cooler
Best for: AMD TR4 and SP3 workstation builds
- Socket Compatibility
- TR4, sTRX4, SP3, sWRX8
- Cooler Height
- 158mm
- Heat Pipes
- 5
- Tower Design
- Tower
- Fan Size
- 120mm
- System Type
- Server, Workstation
View on Amazon: Noctua 120mm SP3 Threadripper Tower Cooler Affiliate link
This is a tower CPU cooler built for AMD workstation and server sockets, including sTRX4, TR4, and SP3. It measures 6.22 inches tall and uses a 120 mm NF-F12 PWM fan for automatic speed control. At 1.76 pounds, it provides a full-size tower layout for AMD Epyc and Ryzen Threadripper builds. You will find it suits full-height chassis installations where socket SP3, TR4, or sTRX4 cooling is needed instead of Intel LGA sockets.
Pros
- 120 mm NF-F12 fan with PWM automatic speed control
- Dedicated fit for AMD sTRX4, TR4, and SP3 sockets
- Full tower heatsink design measuring 6.22 inches in height
- Engineered for AMD Epyc and Ryzen Threadripper processors
Cons
- Lacks support for Intel LGA 2011 and LGA 2066 sockets
- Height of 6.22 inches requires substantial vertical chassis clearance
Good fit if
- You run an AMD TR4, sTRX4, or SP3 socket processor.
- You have a chassis with at least 6.22 inches of cooler height clearance.
- You want a 120 mm PWM fan setup for server or workstation cooling.
Skip if
- You use an Intel LGA 2011 or LGA 2066 motherboard.
- You need a low-profile heatsink for 1U or 2U server rack enclosures.
Verdict: Noctua 120mm AMD TR4 SP3 Tower Cooler delivers dedicated cooling for AMD workstation and server processors when your chassis can accommodate its 6.22-inch height. It serves large-socket AMD platforms rather than Intel LGA configurations.
Noctua NH-U9 Workstation CPU Cooler
Best for: AMD Threadripper and Epyc 4U server builds
- Socket Compatibility
- TR4, sTRX4, sWRX8, SP3
- Cooler Height
- 125mm
- Fan Size
- 92mm
- System Type
- Server, Workstation
- Dimensions
- 3.74 × 4.72 × 4.92 inches
- Weight
- 2.2 pounds
View on Amazon: Noctua NH-U9 Workstation CPU Cooler Affiliate link
This dual-fan air cooler is built for AMD server and workstation sockets including sTRX4, TR4, and SP3. Standing at 4.92 inches tall, it fits standard 4U chassis layouts without blocking PCIe clearance. It features two 92mm PWM fans mounted on a tower heatsink weighing 2.2 pounds. If you run AMD Threadripper or Epyc hardware in a 4U rackmount case, this gives you dedicated multi-fan airflow.
Pros
- Includes two 92mm PWM fans for automatic speed control
- Meets 4U rackmount height requirements at 4.92 inches tall
- Dedicated base design for AMD sTRX4, TR4, and SP3 sockets
Cons
- Lacks support for Intel LGA 2011 or LGA 2066 sockets
- Height exceeds clearance limits for 1U, 2U, and 3U server chassis
Good fit if
- You run AMD Threadripper or Epyc processors on sTRX4, TR4, or SP3 sockets
- You have a 4U server chassis that accommodates a 4.92-inch tower height
Skip if
- You need a cooler for an Intel LGA 2011 or LGA 2066 motherboard
- You are building inside a compact 1U or 2U server rack
Verdict: Noctua 92mm Dual Fan AMD Workstation Cooler provides dedicated 4U-compliant cooling for AMD Threadripper and Epyc processors. Its dual PWM fans deliver focused airflow without obstructing adjacent PCIe slots.
Acogedor SP3 4U Aluminum Server Cooler
Best for: AMD EPYC 4U server builds
- Socket Compatibility
- SP3
- Fan Speed
- 3800 RPM
- System Type
- Server, Workstation
- Material
- Aluminum
- Features
- Fan
- Dimensions
- 4.7 × 3.6 × 5 inches
View on Amazon: Acogedor SP3 4U Aluminum Server Cooler Affiliate link
This Acogedor unit is an active aluminum heatsink designed for AMD Socket SP3 processors in 4U chassis. It measures 5 inches tall, 4.7 inches long, and 3.6 inches wide, fitting H11 generation server systems and workstations running EPYC 7000 series CPUs. An integrated 4-pin fan runs up to 3800 RPM to push air across aluminum fins. It suits you if you need a dedicated cooling solution for AMD enterprise hardware.
Pros
- Native Socket SP3 support for AMD EPYC 7000 series
- High-speed 3800 RPM 4-pin cooling fan
- Heatsink constructed with aluminum fins
- Sized for 4U server and workstation enclosures
Cons
- No support for Intel LGA 2011 or LGA 2066 sockets
- Five-inch height does not fit 1U or 2U enclosures
Good fit if
- You run an AMD EPYC 7000 processor on a Socket SP3 motherboard.
- You have a 4U server case or workstation chassis with at least 5 inches of cooler clearance.
Skip if
- You need mounting hardware for Intel LGA 2011 or LGA 2066 motherboards.
- You are assembling hardware in a 1U or 2U low-profile rack.
Verdict: Acogedor 4U SP3 Aluminum CPU Cooler provides targeted active cooling for AMD EPYC 7000 series processors in 4U server enclosures. Its aluminum fin design and 3800 RPM fan deliver dedicated thermal management if your hardware uses Socket SP3.
Specifications side by side
| Spec | SilverStone 4U LGA 2011/2066 CPU Cooler | SilverStone 2U LGA4189 Active Cooler | KLAWKKNI 2U Passive LGA 2011 Cooler | Dynatron 1U Server LGA 2011 CPU Cooler | Noctua 120mm SP3 Threadripper Tower Cooler | Noctua NH-U9 Workstation CPU Cooler | Acogedor SP3 4U Aluminum Server Cooler |
|---|---|---|---|---|---|---|---|
| Socket Compatibility | Intel LGA 2011 / 2066 Square & Narrow | LGA4189 | LGA 2011 | LGA2011 | TR4, sTRX4, SP3, sWRX8 | TR4, sTRX4, sWRX8, SP3 | SP3 |
| Cooler Height | not stated | 2.56 inches | not stated | not stated | 158mm | 125mm | not stated |
| Heat Pipes | not stated | 5 | not stated | not stated | 5 | not stated | not stated |
| Tower Design | not stated | not stated | not stated | not stated | Tower | not stated | not stated |
| Fan Size | not stated | not stated | not stated | not stated | 120mm | 92mm | not stated |
| TDP Rating | not stated | 270W | not stated | 150 Watts | not stated | not stated | not stated |
| Fan Speed | not stated | 1,600 ~ 10,000rpm | not stated | not stated | not stated | not stated | 3800 RPM |
| Lighting | not stated | not stated | RGB | not stated | not stated | not stated | not stated |
| System Type | Server, Workstation | Server, Workstation | Server | Server | Server, Workstation | Server, Workstation | Server, Workstation |
| Color | not stated | not stated | Black | not stated | Brown/Aluminium/Beige | Brown, Beige | not stated |
| Server Height | not stated | 2U | 2U | 1U | not stated | not stated | not stated |
| Cooling Method | not stated | not stated | Passive | not stated | not stated | not stated | not stated |
| Material | not stated | not stated | not stated | not stated | not stated | not stated | Aluminum |
| Features | not stated | not stated | not stated | Fan | Fan | not stated | Fan |
| Dimensions | 4.17 × 3.66 × 4.96 inches | 4.45 × 3.07 × 2.56 inches | not stated | 5.4 × 2.1 × 4.7 inches | 4.92 × 2.8 × 6.22 inches | 3.74 × 4.72 × 4.92 inches | 4.7 × 3.6 × 5 inches |
| Weight | 1 pounds | not stated | not stated | 13.8 ounces | 1.76 pounds | 2.2 pounds | not stated |
| Size | 4U | not stated | A-RGB | not stated | not stated | One size | not stated |
| Model | not stated | SST-XE02-4189 | KLAWKKNI | R16 | NH-U12S TR4-SP3 | NH-U9 TR4-SP3 | Thincolczkmth432f1035 |
When you need a matching enclosure, compare silverstone technology 4u rackmount server alternatives to verify clearance specs.
Frequently asked questions
Is the SilverStone 4U LGA 2011/2066 cooler compatible with AMD Threadripper?
No, this cooler is designed exclusively for Intel platforms. The specifications list compatibility only with LGA 2011 and LGA 2066 sockets. If you are building with AMD Threadripper or EPYC processors, you need a cooler that supports Socket SP3. The SilverStone 2U LGA4189 and various Noctua models in this list support those AMD platforms instead.
What is the physical height of the SilverStone 4U cooler?
The SilverStone 4U LGA 2011/2066 CPU Cooler stands 4.96 inches tall. It also measures 3.66 inches in width and 4.17 inches in length. This 4U form factor requires a server chassis with sufficient vertical clearance. You should verify your rackmount case dimensions before installation to ensure the heatsink fits without obstructing adjacent components.
Can I use a 1U cooler for LGA 2011 processors?
Yes, the Dynatron 1U Server LGA 2011 CPU Cooler supports this socket. It features a copper stacked fin design and a vapor chamber base for active thermal management. This model is ideal for low-profile environments where space is limited. It is rated for 150W square-socket processors, making it a compact alternative to larger 4U or 2U solutions.
Does the SilverStone 2U LGA4189 cooler support LGA 2011?
No, the SilverStone 2U LGA4189 Active Cooler is built for LGA4189 sockets. It does not fit LGA 2011 or LGA 2066 platforms. This cooler targets newer server builds requiring support for 270W TDP processors in a compact 2U footprint. For LGA 2011 systems, you must select a cooler explicitly listed with that socket compatibility, such as the SilverStone 4U model.
Is there a passive cooling option for LGA 2011 servers?
The KLAWKKNI 2U Passive LGA 2011 Cooler provides a passive cooling solution for these systems. It uses a heatsink design without active fans, relying on case airflow for heat dissipation. This model includes RGB lighting and is available in black. It is suitable for server setups where noise reduction is a priority and sufficient airflow is available from system fans.
Which cooler in this list supports AMD EPYC processors?
The Acogedor SP3 4U Aluminum Server Cooler supports AMD EPYC 7000 series processors. It is designed for Socket SP3 and operates in 4U server enclosures. The unit features an aluminum fin design and includes a fan rated for 3800 RPM. This provides targeted active cooling for EPYC platforms, distinguishing it from the Intel-focused SilverStone options in the list.
Do Noctua workstation coolers fit in 4U server cases?
Yes, the Noctua NH-U9 Workstation CPU Cooler is designed for 4U-compliant setups. It supports AMD Threadripper and EPYC processors via Socket SP3. The cooler uses dual PWM fans to deliver focused airflow without obstructing adjacent PCIe slots. Its dimensions are 4.92 inches in height and 4.72 inches in width, fitting standard 4U server form factors.