Looking Beyond the SilverStone Technology XE04-4677VB 4U Small? 6 Alternatives Worth a Look

How each alternative compares

Supermicro 2U Server Heatsink

The Supermicro 2U Server Heatsink shifts from active to passive cooling. It lacks the SilverStone’s five heat pipes and dual ball bearing fan, relying instead on a heavy copper block for heat dissipation. This 10-pound unit is designed for 2U+ servers with Intel Xeon E5-2600 or E5-2400 series processors, not the LGA4677 sockets supported by the SilverStone. You gain silent operation but lose adjustable airflow orientation. It suits rack-mounted environments where case airflow is robust and fan noise is unacceptable. The trade-off is significant weight and a narrower socket compatibility range.

Dynatron 1U Copper Vapor Chamber Server Heatsink

The Dynatron B4A offers 1U passive cooling using a copper vapor chamber, a stark contrast to the SilverStone’s 4U active design. It is much smaller, measuring 4.2 by 3.1 inches, and weighs just over one pound. This cooler targets Intel Xeon servers in tight 1U chassis with strong dedicated airflow. It gives up the SilverStone’s PWM-controlled fan and adjustable heatsink orientation. You cannot use it with LGA4677 sockets or in standard desktop cases. It is strictly for specialized server builds requiring silent, fanless operation in dense rackmount environments with sufficient external air movement.

Dynatron 1U Copper Vapor Chamber Server Heatsink

The Dynatron A28 is a passive 1U heatsink for AMD EPYC SP3 systems, differing from the SilverStone’s Intel-only focus. It uses a copper vapor chamber and skived fins for heat transfer without a fan. The unit measures 4.7 by 3.2 inches and weighs 1.01 pounds. You lose the SilverStone’s dual ball bearing fan and flexible airflow direction. This cooler is not suitable for LGA4677 sockets or consumer desktops. It fits 1U servers that provide specific airflow for the fins. Choose this if you need silent cooling for AMD EPYC SP3 in a constrained 1U space with managed case airflow.

SilverStone 1U Passive Copper Server Heatsink

The SilverStone 1U Passive Copper Cooler also comes from SilverStone but serves a different niche. It is a passive 1U heatsink for LGA2011 or LGA2066 processors, not LGA4677. It uses copper instead of the SilverStone XE04’s aluminum fins and heat pipes. The unit weighs 1.08 pounds and measures 3.54 inches square. You give up the active fan and adjustable orientation found in the 4U model. It is designed for tight 1U rackmount servers where external airflow is managed separately. Pick this if you need a silent, compact solution for older Intel server platforms in space-constrained racks.

MITXPC Threadripper EPYC Passive 2U Heatsink

The MITXPC Threadripper EPYC Passive 2U Heatsink targets AMD Threadripper and EPYC builds, unlike the SilverStone’s Intel focus. It is a passive 2U unit, taller than the SilverStone’s 4U profile but lacking a fan. Dimensions are 4.45 by 3.15 by 2.52 inches. You lose the SilverStone’s PWM fan control and adjustable airflow direction. This cooler relies on case airflow for dissipation. It fits AMD SP3 sockets, not LGA4677. Choose this for silent 2U server builds where strong case airflow is available and you need cooling for AMD platforms without the noise of active fans.

ASHATA 1U Passive LGA 2011 Server Heatsink

The ASHATA 1U Passive LGA 2011 Heatsink is a fanless option for Supermicro servers, contrasting with the SilverStone’s active cooling. It supports LGA 2011 CPUs, not LGA4677. The unit is extremely small, measuring 0.39 inches on each side and weighing 7.69 ounces. You sacrifice the SilverStone’s five heat pipes and dual ball bearing fan. It provides silent operation but requires dedicated airflow in a 1U chassis. This cooler is for users who need a lightweight, silent solution for older Intel server platforms in tight Supermicro builds with managed external air movement.

Quick picks

Our 7 picks

1 Best overall

SilverStone 4U LGA4677 CPU Cooler

Best for: 4U Intel LGA4677 server builds

Socket Compatibility

Intel LGA4677/4710

Material

aluminum

Server Height

4U

Compatible Device

Server/Workstation CPU

View on Amazon: SilverStone 4U LGA4677 CPU Cooler Affiliate link

This SilverStone cooler is built for 4U server chassis and supports Intel LGA4677 and LGA4710 sockets. It uses five 6mm heat pipes and aluminum fins to move heat away from the processor. The dual ball bearing fan is PWM controlled for adjustable speeds. You can adjust the heatsink orientation to match your case airflow. It is a solid choice for high-density workstation builds.

Pros

• Supports Intel LGA4677 and LGA4710 sockets
• Five 6mm heat pipes for efficient heat transfer
• Adjustable heatsink orientation for case airflow matching
• Dual ball bearing fan with PWM control

Cons

• Requires a 4U chassis slot
• Limited to Intel server sockets only
• Passive aluminum fin design lacks vapor chamber

Good fit if

• You are building a 4U server or workstation
• You use an Intel LGA4677 or LGA4710 CPU
• You need to align heatsink airflow with case fans

Skip if

• You are using a consumer desktop motherboard
• You have only a 1U or 2U rack space
• You need AMD EPYC or Ryzen support

Verdict: SilverStone 4U LGA4677 CPU Cooler is a reliable option for 4U server builds using Intel LGA4677 or LGA4710 processors. It offers stable cooling through five heat pipes and adjustable airflow orientation, making it suitable for dense workstation environments.

2 Also great

Supermicro 2U Server Heatsink

Best for: Intel Xeon E5-2600 server builds

Socket Compatibility

LGA2011 or LGA1356

Server Height

2U+

Compatible Device

intel Xeon E5-2600 and E5-2400 Series

Mounting Type

Screws & Springs

System Type

Server

Weight

10 pounds

View on Amazon: Supermicro 2U Server Heatsink Affiliate link

This Supermicro heatsink is built for 2U+ server chassis. It supports LGA2011 and LGA1356 sockets, fitting Intel Xeon E5-2600 and E5-2400 series processors. The design uses screws and springs for secure mounting. It weighs 10 pounds. You should choose this if you need passive cooling for high-power server CPUs in a standard 2U rack environment.

Pros

• Supports LGA2011 and LGA1356 sockets
• Compatible with Intel Xeon E5-2600 and E5-2400 series
• Includes screws and springs for square and narrow ILMs
• Designed for 2U+ server chassis

Cons

• Passive design requires strong case airflow
• Limited to specific server socket types
• Heavy 10-pound build

Good fit if

• You use a 2U+ server chassis
• You run Intel Xeon E5-2600 or E5-2400 CPUs
• You need a passive cooling solution for a server

Skip if

• You use consumer desktop sockets like LGA1700 or AM5
• You need active fan cooling
• You are building a standard desktop PC

Verdict: Supermicro X9 2U+ Copper Heatsink is a solid passive cooling option for 2U+ servers using Intel Xeon E5-2600 or E5-2400 series processors. It fits users who need reliable, fanless heat dissipation in a rack-mounted environment.

3 Also great

Dynatron 1U Copper Vapor Chamber Server Heatsink

Best for: Intel Xeon 1U server passive cooling

Socket Compatibility

FCLGA 3647 Narrow ILM

Material

Copper with vapor chamber base

Server Height

1U

Dimensions

108.0 x 81.0 x 27.0 mm

System Type

Server

Weight

1.06 pounds

View on Amazon: Dynatron 1U Copper Vapor Chamber Server Heatsink Affiliate link

The Dynatron B4A is a 1U passive server heatsink designed for Intel Xeon processors. It uses a copper vapor chamber base with stacked copper fins for heat dissipation. The unit measures 108.0 x 81.0 x 27.0 mm and weighs 1.06 pounds. It supports the FCLGA 3647 Narrow ILM socket. This cooler suits high-density server environments where space is limited and passive cooling is required.

Pros

• Copper vapor chamber base for efficient heat transfer
• Stacked copper fin array for passive cooling
• Compact 1U form factor fits tight chassis
• Compatible with Intel FCLGA 3647 Narrow ILM sockets

Cons

• Passive design requires strong case airflow
• Limited to Intel server sockets only
• No fan included for active cooling

Good fit if

• You need a 1U passive cooler for Intel Xeon systems
• You have a server chassis with adequate airflow
• You are building a dense compute cluster

Skip if

• You use AMD EPYC or consumer Intel CPUs
• You need active cooling with a fan
• You require a cooler taller than 1U

Verdict: The Dynatron B4A 1U Copper Vapor Chamber Cooler is a specialized solution for Intel Xeon servers. It fits best in 1U chassis with strong airflow. It is not suitable for consumer desktops or AMD platforms.

4 Best premium

Dynatron 1U Copper Vapor Chamber Server Heatsink

Best for: AMD EPYC SP3 1U server builds

Socket Compatibility

SP3

Material

Copper 1100 with Skiving Fin

Server Height

1U

Compatible Device

AMD EPYC

Dimensions

120 x 82 x 27 mm

System Type

Server

View on Amazon: Dynatron 1U Copper Vapor Chamber Server Heatsink Affiliate link

This is a passive copper heatsink built for AMD EPYC processors on the SP3 socket. It uses a vapor chamber base and skived fins to move heat. The unit measures 120 by 82 by 27 mm and weighs 1.01 pounds. It fits in 1U servers and taller chassis. You need a system with active airflow to cool it effectively.

Pros

• SP3 socket compatibility for AMD EPYC
• Copper 1100 material with vapor chamber base
• Skived fin construction for surface area
• Compact 1U height of 27 mm

Cons

• Passive design requires strong case airflow
• Limited to SP3 socket only
• No included fan or mounting hardware listed

Good fit if

• You use an AMD EPYC processor
• You have a 1U server chassis
• You need a low-profile passive cooler

Skip if

• You use an Intel or AM4 socket
• You want a fan included in the box
• You need a taller heatsink for better cooling

Verdict: Dynatron A28 SP3 Copper Heatsink is a specialized passive cooler for AMD EPYC SP3 systems. It fits 1U servers that provide dedicated airflow for the skived fins and vapor chamber.

5 Also great

SilverStone 1U Passive Copper Server Heatsink

Best for: 1U rackmount servers with LGA2011/2066

Socket Compatibility

LGA2011/2066

Material

Copper skived-fin and copper base

Server Height

1U

Cooling Method

Passive

System Type

Server

Dimensions

3.54 × 3.54 × 1.02 inches

View on Amazon: SilverStone 1U Passive Copper Server Heatsink Affiliate link

This SilverStone unit is a passive 1U server cooler measuring 26mm in height. It uses a copper base and skived fins for heat dissipation. It supports Intel LGA2011 and LGA2066 sockets. The design fits standard 1U rackmount servers. You need active airflow from case fans to make it work. It is built for compact, low-profile server builds.

Pros

• 26mm low profile height
• Copper skived-fin construction
• LGA2011 and LGA2066 support
• 1U rackmount compatible

Cons

• Passive cooling requires external fans
• Limited to Intel server sockets
• No fan included in package

Good fit if

• You need a 1U server solution
• You use LGA2011 or LGA2066 CPUs
• You have chassis airflow for passive cooling

Skip if

• You need active fan integration
• You use AMD EPYC or Ryzen
• You require taller clearance options

Verdict: SilverStone 1U Passive Copper Cooler is a specialized heatsink for 1U rackmount servers using LGA2011 or LGA2066 processors. It fits systems where space is tight and external airflow is managed separately.

6

MITXPC Threadripper EPYC Passive 2U Heatsink

Best for: AMD Threadripper and EPYC 2U servers

Socket Compatibility

sTRX4, TR4, SP3

Material

Aluminum, Heatpipes

Server Height

2U

Cooling Method

Passive

Dimensions

4.45" x 3.15" x 2.52"

System Type

Server

View on Amazon: MITXPC Threadripper EPYC Passive 2U Heatsink Affiliate link

This passive heatsink supports AMD Threadripper and EPYC processors in 2U systems. It dissipates up to 180 watts of heat using aluminum fins and heatpipes. The unit includes pre-applied Shin-Etsu 7762 thermal paste. Its compact dimensions of 4.45 by 3.15 by 2.52 inches fit standard server racks. You need active case airflow to use it effectively.

Pros

• Passive cooling design for silent operation
• Supports AMD Threadripper and EPYC SP3 sockets
• Handles up to 180W heat dissipation
• Includes pre-applied Shin-Etsu 7762 thermal paste

Cons

• Requires strong case airflow for passive cooling
• Limited to 180W TDP capacity
• No included fan for active cooling

Good fit if

• You use AMD Threadripper or EPYC CPUs
• You need a 2U server cooling solution
• You want silent operation with forced airflow

Skip if

• You need active fan cooling
• Your CPU exceeds 180W TDP
• You use Intel or non-EPYC AMD sockets

Verdict: Dynatron A34 Passive Server Heatsink fits AMD Threadripper and EPYC builds needing silent 2U cooling. It works best when your case provides strong airflow.

7 Best budget

ASHATA 1U Passive LGA 2011 Server Heatsink

Best for: silent 1U Supermicro server builds

Socket Compatibility

LGA 2011 (socket R)

Material

Metal

Server Height

1U

Cooling Method

Passive

Compatible Device

Supermicro X9/X10 1U UP and DP servers

Dimensions

0.39 × 0.39 × 0.39 inches

View on Amazon: ASHATA 1U Passive LGA 2011 Server Heatsink Affiliate link

This ASHATA heatsink is a passive cooling solution designed for 1U server chassis. It uses a metal construction to dissipate heat without fans. The unit supports LGA 2011 sockets and fits Supermicro X9 or X10 1U UP and DP servers. It weighs 7.69 ounces. You should choose this if you need silent operation in a tight 1U space.

Pros

• Passive cooling for zero noise
• Supports LGA 2011 sockets
• Fits 1U server chassis
• Compatible with Supermicro X9/X10

Cons

• Passive design limits cooling power
• Only fits LGA 2011 sockets
• No included mounting hardware listed

Good fit if

• You need silent 1U server cooling
• You use Supermicro X9 or X10 boards
• You have an LGA 2011 CPU

Skip if

• You need active fan cooling
• You use AMD EPYC sockets
• You require a 2U chassis

Verdict: ASHATA 1U Passive CPU Heatsink is a silent, fanless option for 1U Supermicro servers using LGA 2011 CPUs.

Specifications side by side

Frequently asked questions

See also

• silverstone technology tx300 vt alternatives
• silverstone technology vida 120 slim alternatives