SilverStone 2U LGA 3647 Square CPU Cooler Alternatives: 6 Similar Picks Compared

How the Alternatives Compare

SilverStone 2U LGA4189 Active Cooler

This SilverStone model targets Intel LGA4189 sockets, whereas the original supports LGA 3647 Square. You must match the socket to your motherboard. The cooler maintains the same 2U server height, fitting standard rack enclosures. It is slightly narrower at 3.07 inches compared to the original 3.58 inches. The length is greater at 4.45 inches. You gain compatibility with newer Intel workstation platforms. You lose support for the square LGA 3647 layout. Pick this if your server uses the LGA4189 socket. It offers similar thermal density for enterprise workloads. The compact footprint ensures it fits in tight server chassis. It is a direct alternative for different Intel architectures.

SilverStone 2U Socket SP5 CPU Cooler

This cooler is built for AMD EPYC Socket SP5 processors. It supports up to 400W TDP, which is double the 205W capacity of the original SilverStone unit. You get significantly higher thermal performance for power-hungry server CPUs. The fan reaches 57.5 dBA, making it louder than typical quiet workstation coolers. It fits the same 2U height but is longer at 4.65 inches. You must use AMD SP5 motherboards. This option is for high-density racks needing serious cooling power. It sacrifices acoustic silence for raw dissipation. The larger frame accommodates more heat sink material. Choose this if you need to cool high-wattage AMD EPYC chips in a 2U enclosure. It is not suitable for Intel LGA 3647 Square systems.

SilverStone 2U AMD Socket SP5 CPU Cooler

This SilverStone variant also supports AMD Socket SP5 with 400W TDP cooling. It matches the high thermal capacity of the premium SP5 model. The fan spins at 10,000 RPM, prioritizing airflow over quiet operation. It is designed for dense 2U server racks rather than quiet offices. The dimensions are identical to the other SP5 model, measuring 4.65 inches in length. You need an AMD SP5 motherboard to use this cooler. It provides heavy-duty cooling for high-performance server builds. The original SilverStone is for Intel and lower TDP. Pick this alternative if you are building an AMD EPYC server. It delivers robust thermal management in a compact 2U form factor. It is not compatible with Intel LGA sockets.

SilverStone 2U LGA4677 CPU Cooler

This cooler supports Intel LGA4677 sockets, differing from the original LGA 3647 Square. It handles up to 270W TDP, which is higher than the original 205W. The fan runs at 10,000 RPM for maximum airflow and static pressure. It is louder than standard workstation coolers. The unit is 3.07 inches wide, narrower than the original. It is 4.65 inches long, extending further into the chassis. You need an Intel LGA4677 motherboard. This option is for high-TDP Intel server builds in 2U racks. It offers more thermal headroom for newer Intel processors. The compact width helps in dense server arrangements. Choose this if you need to cool LGA4677 chips. It is not a drop-in replacement for LGA 3647 Square boards.

Noctua 120mm SP3 Threadripper Tower Cooler

This Noctua cooler is a tower design, not a low-profile 2U unit. It stands 6.22 inches tall, requiring a full-size tower case. It supports AMD SP3 and TR4 sockets, not Intel LGA 3647 Square. You use a standard 120mm PWM fan for cooling. The width is 2.8 inches, and the length is 4.92 inches. It weighs 1.76 pounds. This option is for workstation towers, not rack servers. You lose the ability to fit in a 2U rack enclosure. You gain a larger cooling surface area for quieter operation. Pick this if you have a standard ATX workstation case. It is not suitable for compact 2U server chassis. The socket compatibility is entirely different from the original SilverStone model.

Noctua NH-U9 Workstation CPU Cooler

This Noctua cooler uses two 92mm fans for cooling. It is designed for AMD SP3 and TR4 sockets. The height is 4.92 inches, fitting 4U chassis rather than 2U racks. It is wider at 4.72 inches. The length is 3.74 inches. It weighs 2.2 pounds. This option is for larger workstation enclosures. You cannot install it in a standard 2U server rack. You get dedicated cooling for AMD EPYC and Threadripper CPUs. The original SilverStone is for Intel and fits in 2U. Pick this if you have a 4U workstation case. It provides reliable cooling for AMD platforms. It is not compatible with Intel LGA 3647 Square motherboards. The form factor is significantly larger than the original compact cooler.

Quick picks

Our 7 picks

1 Best overall

SilverStone 2U LGA 3647 Square CPU Cooler

Best for: 2U LGA 3647 Square server builds

Socket Compatibility

Intel LGA 3647 Square

Fan Size

60mm

TDP Rating

205W

System Type

Server, Workstation

Server Height

2U

Dimensions

3.46 × 3.58 × 2.52 inches

View on Amazon: SilverStone 2U LGA 3647 Square CPU Cooler Affiliate link

This SilverStone unit is a compact server heatsink designed specifically for 2U chassis environments. It features a 2.52-inch total height, four 6mm heat pipes with aluminum fins, and a 60mm dual ball bearing PWM fan. With thermal capacity rated up to 205W TDP, it suits your high-density Intel LGA 3647 Square workstation or server builds where vertical clearance is strictly restricted.

Pros

• Handles up to 205W TDP processors
• Compact 2.52-inch height fits 2U server chassis
• Four 6mm heat pipes with aluminum fins
• Dual ball bearing 60mm PWM fan

Cons

• Limited strictly to Intel LGA 3647 Square sockets
• Small 60mm fan format

Good fit if

• You run an Intel LGA 3647 Square socket processor in a 2U rackmount chassis.
• You need up to 205W TDP heat dissipation within tight physical dimensions.

Skip if

• You use an LGA 3647 Narrow socket or AMD platform.
• You need a larger workstation cooler with fans above 60mm.

Verdict: SilverStone 2U LGA 3647 Square CPU Cooler delivers 205W thermal capacity for compact 2U server enclosures. It provides focused cooling for square-socket Intel enterprise motherboards.

2 Also great

SilverStone 2U LGA4189 Active Cooler

Best for: Intel LGA4189 server workstations

Socket Compatibility

LGA4189

Cooler Height

2.56 inches

Heat Pipes

5

TDP Rating

270W

Fan Speed

1,600 ~ 10,000rpm

System Type

Server, Workstation

View on Amazon: SilverStone 2U LGA4189 Active Cooler Affiliate link

This SilverStone cooler is built for Intel LGA4189 sockets in 2U server chassis. It uses five 6mm heat pipes and aluminum fins to handle up to 270W TDP. The included PWM fan runs between 1,600 and 10,000 RPM. Its compact dimensions are 3.07 by 2.56 by 4.45 inches. This design suits workstations needing high airflow in tight spaces.

Pros

• Five 6mm heat pipes for efficient heat transfer
• Handles up to 270W TDP
• Dual ball bearing fan with 198,000-hour MTTF
• Compact 2U form factor fits small chassis

Cons

• Limited to Intel LGA4189 socket only
• Fan speed range starts high at 1,600 RPM
• No mention of noise level specifications

Good fit if

• You use an Intel LGA4189 processor
• You need a 2U server cooling solution
• You require support for high TDP CPUs

Skip if

• You use a different CPU socket
• You need a cooler for a desktop PC
• You require silent operation below 1,600 RPM

Verdict: SilverStone 2U LGA4189 CPU Cooler is a specialized solution for Intel LGA4189 workstations. It fits servers requiring 2U height and high thermal performance.

3 Also great

SilverStone 2U Socket SP5 CPU Cooler

Best for: high-power 2U AMD Epyc Socket SP5 servers

Socket Compatibility

Socket SP5

Cooler Height

64mm

Heat Pipes

5

Fan Size

60mm

TDP Rating

400W

Fan Speed

1,600 ~ 10,000 RPM

View on Amazon: SilverStone 2U Socket SP5 CPU Cooler Affiliate link

This compact 2U server cooler fits AMD Epyc processors on Socket SP5. You get a low 64mm overall height paired with five 6mm heat pipes and aluminum fins designed to handle up to 400W TDP. Its 60mm PWM dual ball bearing fan scales up to 10,000 RPM for high static pressure. It suits your build if you run high-wattage SP5 server hardware in tight rackmount enclosures.

Pros

• Rated for up to 400W TDP on AMD Epyc Socket SP5 processors
• Compact 64mm height fits standard 2U chassis clearances
• Five 6mm heat pipes paired with aluminum fins
• Dual ball bearing fan rated for 198,000 hours MTTF

Cons

• High noise level up to 57.5 dBA at maximum fan speed
• Limited strictly to AMD Socket SP5 platforms

Good fit if

• You run an AMD Epyc processor on Socket SP5 requiring up to 400W TDP cooling.
• You need a 2U rackmount or compact workstation cooler under 65mm in height.

Skip if

• You need compatibility with Intel LGA 3647 or other processor sockets.
• You require a low-noise fan setup for open-office or desk-side environments.

Verdict: SilverStone 2U Socket SP5 CPU Cooler delivers serious 400W thermal dissipation in a compact 64mm frame built for dense 2U rack enclosures. Its 57.5 dBA maximum acoustic level makes it best suited for dedicated server racks rather than quiet workspaces.

4 Best budget

SilverStone 2U AMD Socket SP5 CPU Cooler

Best for: high-TDP 2U AMD SP5 server builds

Socket Compatibility

SP5

Cooler Height

64mm

Heat Pipes

5

Fan Size

60mm

TDP Rating

400W

Fan Speed

10,000 RPM

View on Amazon: SilverStone 2U AMD Socket SP5 CPU Cooler Affiliate link

This SilverStone 2U cooler is designed for AMD EPYC processors on Socket SP5 with thermal ratings up to 400W TDP. Measuring 64mm tall, it fits standard 2U server chassis. It features five 6mm heat pipes and a 60mm PWM fan that reaches up to 10,000 RPM to move 51.9 CFM of air. It suits you if you run high-wattage SP5 hardware in compact rackmount deployments.

Pros

• Rated for up to 400W TDP processors
• Five 6mm heat pipes with aluminum fins
• Compact 64mm height fits 2U rackmount enclosures
• High static pressure fan pushing up to 30.99 mmH2O

Cons

• Loud maximum fan operation at 57.5 dBA
• Compatible only with Socket SP5 motherboards

Good fit if

• You need a 2U rackmount cooler for Socket SP5 processors.
• You require up to 400W TDP cooling capacity.

Skip if

• You use Intel LGA 3647 or other non-SP5 CPU sockets.
• You need a quiet workstation cooler below 57.5 dBA.

Verdict: SilverStone 2U SP5 Server CPU Cooler provides heavy-duty 400W TDP cooling for high-density 2U Socket SP5 server racks. Its 10,000 RPM fan prioritizes raw airflow and high static pressure over silent acoustics.

5 Also great

SilverStone 2U LGA4677 CPU Cooler

Best for: high-TDP Intel LGA4677 2U server rack builds

Socket Compatibility

Intel LGA4677

Heat Pipes

5

TDP Rating

270W

Fan Speed

1,600~10,000 RPM

System Type

Server, Workstation

Server Height

2U

View on Amazon: SilverStone 2U LGA4677 CPU Cooler Affiliate link

The SilverStone 2U LGA4677 Server CPU Cooler is a compact cooling solution built specifically for Intel LGA4677 server and workstation sockets. At 2.56 inches tall, it fits standard 2U chassis configurations while handling thermal loads up to 270W TDP. With five 6mm heat pipes and a dual ball bearing PWM fan reaching 10,000 RPM, it suits you if you deploy high-draw Intel hardware in dense rackmount enclosures.

Pros

• Rated for thermal loads up to 270W TDP
• Five 6mm heat pipes paired with aluminum fins
• Compact 2.56-inch height fits standard 2U server chassis
• Dual ball bearing PWM fan delivers up to 51.9 CFM and 30.99mmH2O

Cons

• High maximum noise output reaching 57.5 dBA
• Compatibility limited strictly to Intel LGA4677 sockets

Good fit if

• You need a 2U rackmount cooler for an Intel LGA4677 processor.
• You require cooling capacity for processors rated up to 270W TDP.
• You deploy hardware in server rooms where 57.5 dBA fan noise is acceptable.

Skip if

• You need compatibility with LGA 3647 or AMD socket platforms.
• You require a low-noise cooler for an open workstation environment.

Verdict: SilverStone 2U LGA4677 Server CPU Cooler provides 270W TDP thermal management within compact 2U server chassis. Its 10,000 RPM fan prioritizes airflow and static pressure for rack environments over acoustic silence.

6 Best 5 heat pipes

Noctua 120mm SP3 Threadripper Tower Cooler

Best for: AMD Epyc and Threadripper tower workstations

Socket Compatibility

TR4, sTRX4, SP3, sWRX8

Cooler Height

158mm

Heat Pipes

5

Tower Design

Tower

Fan Size

120mm

System Type

Server, Workstation

View on Amazon: Noctua 120mm SP3 Threadripper Tower Cooler Affiliate link

This is a workstation tower heatsink paired with a 120mm NF-F12 PWM fan. At 6.22 inches tall, it provides a larger heatsink structure than compact rackmount coolers, provided your chassis offers enough vertical clearance. It exclusively fits AMD sTRX4, TR4, and SP3 processors, such as Threadripper and Epyc series CPUs. It suits you if you run AMD enterprise platforms inside a standard tower workstation case.

Pros

• Equipped with a 120mm NF-F12 PWM fan for automatic speed control
• Tailored specifically for AMD sTRX4, TR4, and SP3 sockets
• Tower design with a 6.22-inch height profile
• Weighs 1.76 pounds with a compact 2.8-inch width

Cons

• Measures 6.22 inches tall, preventing installation in 2U server racks
• Limited to AMD sTRX4, TR4, and SP3 sockets with no Intel socket support

Good fit if

• You build inside a tower case that fits a 6.22-inch tall heatsink.
• You run AMD Ryzen Threadripper or Epyc processors on TR4, sTRX4, or SP3 sockets.
• You want a 120mm PWM fan for automated fan speed management.

Skip if

• You need a low-profile heatsink for a 2U rackmount server enclosure.
• You run an Intel platform such as an LGA 3647 system.

Verdict: Noctua 120mm AMD Tower Cooler provides dedicated cooling for AMD SP3 and TR4 workstation processors using a standard 120mm PWM fan. Its 6.22-inch height requires a full-size tower enclosure rather than a low-profile 2U rack.

7 Best premium

Noctua NH-U9 Workstation CPU Cooler

Best for: AMD SP3 and TR4 4U workstations

Socket Compatibility

TR4, sTRX4, sWRX8, SP3

Cooler Height

125mm

Fan Size

92mm

System Type

Server, Workstation

Dimensions

3.74 × 4.72 × 4.92 inches

Weight

2.2 pounds

View on Amazon: Noctua NH-U9 Workstation CPU Cooler Affiliate link

This Noctua unit is a dual-fan workstation heatsink designed for AMD sTRX4, TR4, and SP3 sockets. Measuring 4.92 inches in height, it fits 4U server enclosures rather than compact 2U chassis. It includes two 92mm PWM fans and weighs 2.2 pounds. If you manage an AMD EPYC or Ryzen Threadripper workstation with space for a 4U footprint, this cooler gives you dual-fan airflow.

Pros

• Two 92mm NF-A9 PWM fans for automatic speed control
• 4U compliant height at 4.92 inches
• Direct compatibility with AMD sTRX4, TR4, and SP3 sockets

Cons

• Height of 4.92 inches prevents installation in 2U chassis
• Lacks mounting hardware for Intel LGA 3647 sockets

Good fit if

• You run an AMD EPYC or Threadripper system on an SP3, TR4, or sTRX4 socket.
• You have a 4U rackmount case or tower workstation with at least 4.92 inches of vertical clearance.

Skip if

• You need a cooler for an Intel LGA 3647 socket.
• You are building inside a compact 2U server chassis.

Verdict: Noctua 92mm Dual Fan SP3 Server Cooler suits AMD EPYC and Threadripper builds housed in standard 4U chassis. It pairs two 92mm PWM fans with a 4.92-inch profile for dedicated workstation cooling.

Specifications side by side

Frequently asked questions

See also

• silverstone technology tx300 vt alternatives
• chefman small alternatives