SilverStone Argon Low-Profile CPU Cooler vs SilverStone Argon 92mm CPU Cooler (2026): Key Differences
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The silverstone sst ar06 vs sst ar08 v2 comparison highlights two distinct air cooling solutions from SilverStone. Both units feature 92mm PWM fans and utilize heat-pipe direct contact technology for efficient thermal transfer. The primary difference lies in their physical form factor and mounting support. The SST-AR06 is a low-profile design with four heat pipes, while the SST-AR08 V2 is a standard tower cooler with three heat pipes and explicit AM4 socket support. You need to choose based on your case clearance and motherboard compatibility.
Key differences
| Aspect | SilverStone Argon Low-Profile CPU Cooler | SilverStone Argon 92mm CPU Cooler |
|---|---|---|
| Tower Design | Low Profile | Standard Tower |
| Cooler Height | 58mm | 5.33 inches |
| Heat Pipes | 4 | 3 |
| Socket Compatibility | Intel/AMD | AM4 ready |
| Weight | 14.8 ounces | 1.1 pounds |
Which one should you choose?
Choose SilverStone Argon Low-Profile CPU Cooler if
- You need a cooler that fits in cases with limited CPU height clearance.
- You prefer a design with four heat pipes for direct contact efficiency.
- You are building a small form factor system.
Choose SilverStone Argon 92mm CPU Cooler if
- You require explicit support for AMD AM4 sockets.
- You have ample case height and want a standard tower design.
- You need anti-vibration rubber pads for noise dampening.
Verdict: The SST-AR06 is the better choice for small cases where height is restricted. The SST-AR08 V2 suits standard towers and offers specific AM4 compatibility. Select the model that matches your case dimensions and socket requirements.
SST-AR06 vs AR08-V2 Comparison
Tower Design
The SilverStone Argon Low-Profile CPU Cooler (SST-AR06) is built for tight spaces. Its tower height is just 58mm, or 2.28 inches. This low profile allows it to fit inside cases with limited clearance above the CPU socket. You can place larger RAM modules next to it without interference. The SilverStone Argon 92mm CPU Cooler (SST-AR08-V2) is a standard tower design. It stands 5.33 inches tall. This height provides more surface area for heat dissipation but requires a case with higher clearance. If your case supports tall coolers, the AR08-V2 offers more room for airflow. Choose the AR06 for compact builds and the AR08-V2 for standard mid-towers.
Heat Pipes
Heat pipe count affects how quickly heat moves from the base to the fins. The SST-AR06 includes four 6mm heat pipes. This higher number of pipes can help spread heat more evenly across the aluminum fin stack. The SST-AR08-V2 uses three 6mm heat pipes. While it has one fewer pipe, it features unique interweaving diamond-edged fins and exclusive arrow guides. These features help distribute airflow evenly among the pipes. Both designs use heat-pipe direct contact technology to maximize thermal transfer efficiency. The AR06 has more pipes, but the AR08-V2 compensates with optimized fin geometry. Both are efficient for their respective form factors.
Socket Compatibility
Socket support determines which motherboards you can use. The SST-AR06 is compatible with both Intel and AMD sockets. It does not specify exact socket types in the key specs, but it supports general Intel and AMD platforms. The SST-AR08-V2 is AM4 ready. It explicitly supports Intel LGA775, 115X, 1366, and 2011 sockets. It also supports AMD AM2, AM3, FM1, and FM2 sockets. The V2 designation confirms AM4 support, which is crucial for newer AMD Ryzen processors. If you are building with a modern AMD AM4 motherboard, the AR08-V2 is the clear choice. The AR06 is a good general option for older or unspecified platforms.
Fan Size
Both coolers use a 92mm PWM fan. This is a compact fan size compared to the common 120mm or 140mm options. A 92mm fan spins faster to move the same amount of air, which can increase noise levels. However, it allows for a smaller overall cooler footprint. Both units include PWM fans for automatic speed control based on CPU temperature. The SST-AR08-V2 also includes anti-vibration rubber pads to dampen noise from fan movement. The SST-AR06 does not list these pads. Since both use the same fan size, performance will depend on the specific fan curve and the cooler's ability to dissipate heat. The AR08-V2 has a slight edge with its vibration dampening features.
Weight
Weight matters for motherboard stress and shipping. The SST-AR06 weighs 14.8 ounces. This is a lighter unit, which reduces stress on the CPU socket and motherboard PCB. The SST-AR08-V2 weighs 1.1 pounds. This is approximately 17.6 ounces. The extra weight comes from the taller tower and additional fin structure. While heavier, the AR08-V2 offers more cooling potential. For users concerned about minimizing weight on the socket, the AR06 is preferable. For those prioritizing cooling capacity over weight, the AR08-V2 is suitable. Both weights are manageable for standard mounting brackets.
Which Silverstone Argon Cooler Fits Your Case
Small form factor PC builders needing low clearance
The SilverStone SST-AR06 stands only 2.28 inches tall. This low-profile design fits cases with strict height limits. It uses four 6mm heat pipes for efficient heat transfer. You get direct contact with the CPU surface. This model ensures your CPU stays cool without hitting nearby RAM or case walls.
Users with standard ATX cases wanting AM4 support
The SilverStone SST-AR08-V2 reaches 5.33 inches in height. This taller tower allows for better airflow over the fins. It includes three 6mm heat pipes and arrow guides for even air distribution. The V2 version explicitly supports AMD AM4 sockets. It also comes with anti-vibration rubber pads for quieter operation.
Owners of older Intel sockets like LGA 2011
The SST-AR08-V2 supports a wide range of Intel sockets, including LGA 775, 115X, 1366, and 2011. This broad compatibility makes it versatile for older platforms. The interweaving diamond-edged fins improve performance over standard designs. You benefit from balanced silence and cooling efficiency. The included 92mm PWM fan adjusts speed based on temperature.
The products compared
SilverStone Argon Low-Profile CPU Cooler
Best for: small form factor builds
- Socket Compatibility
- Intel/AMD
- Cooler Height
- 58mm
- Heat Pipes
- 4
- Tower Design
- Low Profile
- Fan Size
- 92mm
- Dimensions
- 4.13 × 3.62 × 2.28 inches
View on Amazon: SilverStone Argon Low-Profile CPU Cooler Affiliate link
The SilverStone Argon Low-Profile CPU Cooler is a 58mm tower designed for compact cases. It uses four 6mm heat pipes with direct contact technology to move heat from the CPU to the aluminum fins. The 92mm PWM fan provides airflow control. It fits Intel and AMD sockets. This cooler suits builders who need a small footprint without sacrificing basic cooling efficiency.
Pros
- 58mm height fits low-profile cases
- Four 6mm heat pipes with direct contact
- 92mm PWM fan for speed control
- Compatible with Intel and AMD sockets
Cons
- 92mm fan is smaller than standard 120mm fans
- Lower maximum height limits airflow potential
- Limited to low-profile tower design
Good fit if
- You have a case with strict height limits
- You need a compact cooler for small builds
- You use Intel or AMD processors
Skip if
- You need maximum cooling performance
- Your case supports full-size 120mm fans
- You prefer larger 140mm fan options
Verdict: SilverStone Argon Low-Profile 92mm Cooler is a compact solution for tight cases. It fits users who prioritize size over raw cooling power.
SilverStone Argon 92mm CPU Cooler
Best for: Compact cases with AM4 or Intel LGA 115x
- Heat Pipes
- 3
- Fan Size
- 92mm
- Socket Compatibility
- AM4
- Dimensions
- 3.02 × 3.62 × 5.33 inches
- Weight
- 1.1 pounds
View on Amazon: SilverStone Argon 92mm CPU Cooler Affiliate link
This low-profile air cooler uses a 92mm PWM fan and three 6mm heat pipes to manage CPU temperatures. It features heat-pipe direct contact technology and interweaving diamond-edged fins to improve heat transfer. The design includes exclusive arrow guides to distribute airflow evenly. It fits Intel LGA 115x and AMD AM4 sockets. It suits builds where case height is limited but you still need reliable cooling performance.
Pros
- Three 6mm heat pipes with direct contact technology
- 92mm PWM fan for adjustable speed and noise control
- Interweaving diamond-edged fins increase surface area
- Arrow guides ensure even airflow distribution
Cons
- Only three heat pipes compared to four in competitors
- 92mm fan size limits maximum airflow potential
- Height of 5.33 inches may not fit all cases
Good fit if
- You need a low-profile cooler for a small form factor case
- You use an AMD AM4 or Intel LGA 115x socket
- You want a balance of silence and performance
Skip if
- You require a high-airflow 120mm or 140mm fan
- Your CPU case has less than 5.33 inches of clearance
- You need more than three heat pipes for extreme loads
Verdict: SilverStone Argon 92mm Low-Profile Cooler is a practical option for compact builds using AM4 or Intel sockets. It offers solid cooling for its size but lacks the heat pipe count of larger competitors.
Specifications side by side
| Spec | SilverStone Argon Low-Profile CPU Cooler | SilverStone Argon 92mm CPU Cooler |
|---|---|---|
| Socket Compatibility | Intel/AMD | not stated |
| Cooler Height | 58mm | not stated |
| Heat Pipes | 4 | 3 |
| Tower Design | Low Profile | not stated |
| Fan Size | 92mm | 92mm |
| Dimensions | 4.13 × 3.62 × 2.28 inches | 3.02 × 3.62 × 5.33 inches |
| Weight | 14.8 ounces | 1.1 pounds |
| Color | SST-AR06 | SST-AR08-V2 |
| Model | 90115 | 90149 |
Frequently asked questions
Which SilverStone cooler is better for a small form factor case?
The SilverStone Argon Low-Profile CPU Cooler is the better choice for small form factor builds. Its compact dimensions allow it to fit in tight spaces where larger coolers cannot. This model prioritizes size over raw cooling power, making it ideal for users with strict height limitations. It is a compact solution designed specifically for these constrained environments.
What are the height differences between the SST-AR06 and AR08-V2?
The SilverStone Argon Low-Profile CPU Cooler has a height of 2.28 inches. In contrast, the SilverStone Argon 92mm CPU Cooler stands 5.33 inches tall. This significant difference means the low-profile model fits cases with limited clearance above the CPU socket. The taller model requires more vertical space and is not suitable for low-clearance builds.
Does the SilverStone Argon 92mm support AM4 sockets?
Yes, the SilverStone Argon 92mm CPU Cooler supports AM4 sockets. It is also compatible with Intel LGA 115x processors. This makes it a practical option for compact builds using these specific socket types. The low-profile model data does not explicitly list socket compatibility, so you should verify mounting options for your specific motherboard.
How much do these coolers weigh?
The SilverStone Argon Low-Profile CPU Cooler weighs 14.8 ounces. The SilverStone Argon 92mm CPU Cooler is heavier at 1.1 pounds. This weight difference reflects the additional material in the taller tower design. You should consider case support strength when installing the heavier unit, especially if the case has limited mounting rigidity.
What are the width and length dimensions of the SST-AR06?
The SilverStone Argon Low-Profile CPU Cooler measures 3.62 inches in width and 4.13 inches in length. These dimensions allow it to fit over the CPU socket without interfering with surrounding components. The width matches the taller AR08-V2 model, but the length is greater. This layout helps it stay within the bounds of smaller motherboard footprints.
Is the SilverStone Argon 92mm cooler suitable for tight cases?
The SilverStone Argon 92mm CPU Cooler is a practical option for compact cases, but it is not a low-profile unit. Its 5.33-inch height requires ample vertical clearance. It is suitable for compact builds using AM4 or Intel LGA 115x sockets if your case allows for taller coolers. It offers solid cooling for its size but needs more room than the low-profile version.
Which model has a lower profile design?
The SilverStone Argon Low-Profile CPU Cooler features the lower profile design. Its height is only 2.28 inches, compared to the 5.33-inch height of the Argon 92mm model. This low-profile design is specifically intended for users who prioritize size over raw cooling power. If your case has strict height limits, this model is the only one that will fit.