SilverStone Argon Low-Profile CPU Cooler Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This silverstone sst ar06 review covers the SilverStone Argon Low-Profile CPU Cooler. It is a compact cooling solution designed for small form factor builds. The cooler stands at 58mm tall, which allows it to fit inside cases with limited vertical clearance. It uses a 92mm PWM fan to move air through the heatsink. Four 6mm heat pipes connect directly to the base. This direct contact technology helps transfer heat from the CPU to the aluminum fins efficiently. The unit weighs 14.8 ounces and supports both Intel and AMD sockets.
What stands out
- 58mm low-profile height for small cases
- Four 6mm heat pipes with direct contact
- 92mm PWM fan for adjustable airflow
- Aluminum fin stack for heat dissipation
- Compatible with Intel and AMD platforms
Who it fits
Good fit for
You should consider this cooler if you are building a mini-ITX or small form factor PC. The 58mm height ensures it fits under many standard low-profile case lids. It suits users who need basic cooling for mid-range processors but lack space for large towers. The 92mm fan provides quiet operation compared to larger, faster-spinning fans. It is also a good choice for users who want broad socket support without buying separate versions for different platforms.
Who should skip it
You should look at another option if you run high-end, power-hungry CPUs. A 92mm fan and four heat pipes may not dissipate enough heat for extreme overclocking or high-TDP chips. If you prefer lower noise levels at high loads, the small fan size might need to spin faster, creating more noise. Users needing maximum airflow will find the limited fin surface area restrictive. This cooler is not designed for heavy gaming rigs with top-tier processors.
Verdict: The SilverStone Argon is a practical choice for space-constrained builds. It delivers reliable cooling for modest thermal loads within its size limits.
Key specs explained for SilverStone Argon
Fan Size: 92mm
A 92mm fan is smaller than the standard 120mm or 140mm units found on most tower coolers. This size allows the cooler to fit in compact cases where larger fans would not clear the RAM or side panel. You get adequate airflow for low-profile designs, though it may run slightly louder than larger fans at similar speeds. This is a practical choice for small form factor builds.
Cooler Height: 58mm
The 58mm height is the defining feature of this low-profile design. It ensures compatibility with cases that have tight CPU clearance limits, often under 60mm. Standard air coolers often exceed 150mm, so this spec is critical for mini-ITX or HTPC builds. You must verify your case specifications to ensure this height fits without interference from RAM modules or the case side panel.
Heat Pipes: 4
Four heat pipes provide the surface area needed to transfer heat from the CPU base to the aluminum fins. In a low-profile design, space is limited, so these pipes are essential for maintaining efficiency. Direct contact technology helps the pipes touch the heat source directly. This setup is suitable for mainstream processors but may struggle with high-end chips that generate significant thermal loads.
Tower Design: Low Profile
This design prioritizes vertical clearance over cooling mass. It lacks the large fin stacks of traditional tower coolers. The trade-off is reduced cooling capacity for a significantly smaller footprint. You should choose this if your case height is restricted. It is not intended for extreme overclocking. Compare this against standard towers if you have ample space, as they generally offer better thermal performance.
Design and Build Quality
The SilverStone Argon features a low-profile tower design that measures 58mm in height. This compact footprint allows it to fit in cases with limited vertical clearance. The unit weighs 14.8 ounces and measures 4.13 inches in length, 3.62 inches in width, and 2.28 inches in height. These dimensions ensure it does not interfere with surrounding components in tight spaces.
According to the listing, the cooler uses four 6mm heat pipes made of aluminum fins. It employs heat-pipe direct contact technology to improve heat transfer from the CPU. The 92mm PWM fan is integrated into this aluminum structure. This combination of materials aims for efficient heat conduction without adding excessive bulk. The compact size means you must check your case specifications to ensure the cooler fits.
The model number is 90115, and it is compatible with both Intel and AMD sockets. This broad socket support makes it suitable for various small form factor builds. The aluminum construction keeps the overall weight manageable. You should verify that your RAM modules do not block the fan or heat pipes. The low-profile layout is ideal for users who prioritize case compatibility over maximum cooling potential.
Setup And Daily Use Guide
The SilverStone Argon is designed for low-profile systems, standing at 58mm tall. This compact height allows it to fit inside cases with limited vertical clearance. The cooler weighs 14.8 ounces and measures 4.13 inches in length and 3.62 inches in width. These dimensions require careful planning during installation. You must ensure the cooler does not interfere with nearby components, such as RAM modules or motherboard VRMs, given its proximity to the socket area.
The unit supports both Intel and AMD sockets. This broad compatibility means you can use it across different platforms without needing a specific variant for each brand. The cooler features four 6mm heat pipes with direct contact technology. This design improves heat transfer from the CPU to the aluminum fins. The 92mm PWM fan is included for active cooling. PWM control allows the fan speed to adjust based on thermal load. This feature helps maintain efficient operation without excessive noise during light tasks.
Daily use involves monitoring temperatures under load. The low-profile design prioritizes fitment over maximum cooling potential. It suits users who need a functional cooler for small form factor builds. The straightforward construction and standard fan size make maintenance simple. You can clean the aluminum fins with compressed air if dust accumulates. The 92mm fan size is common, so replacements are easy to find if needed. This cooler is a practical choice for compact PCs where space is the primary constraint.
Before You Buy This Cooler
Before you buy the SilverStone Argon, verify your case clearance. The 58mm height is tight. Measure the space above your CPU socket carefully. Ensure no tall RAM sticks block the 92mm fan. Check that your motherboard has a mounting hole pattern for both Intel and AMD sockets. This cooler uses four direct contact heat pipes. It relies on a single 92mm PWM fan. You must ensure your case has a 92mm fan mount available. If your case only supports 120mm fans, this unit will not work. The compact design saves space but limits airflow compared to larger towers. It suits small form factor builds. It does not replace high-end cooling for heavy workloads. Pair it with quality thermal paste for best results. The low profile allows it to fit where standard coolers cannot. Check your specific case dimensions before purchasing.
Check before you buy
- Measure your case height for 58mm clearance.
- Confirm RAM does not block the 92mm fan.
- Check motherboard socket compatibility for Intel or AMD.
- Verify your case has a 92mm fan mount.
The product at a glance
SilverStone Argon Low-Profile CPU Cooler
Best for: compact ITX builds with mid-range CPUs
- Socket Compatibility
- Intel/AMD
- Cooler Height
- 58mm
- Heat Pipes
- 4
- Tower Design
- Low Profile
- Fan Size
- 92mm
- Dimensions
- 4.13 × 3.62 × 2.28 inches
View on Amazon: SilverStone Argon Low-Profile CPU Cooler Affiliate link
The SilverStone Argon is a low-profile CPU cooler designed for compact builds. It stands 58mm tall and uses a 92mm PWM fan. Four 6mm heat pipes feature direct contact technology for efficient heat transfer. It supports both Intel and AMD sockets. This cooler suits users needing a small footprint without sacrificing basic cooling performance.
Pros
- 58mm tower height fits tight cases
- Four 6mm heat pipes with direct contact
- 92mm PWM fan for adjustable speeds
- Compatible with Intel and AMD sockets
Cons
- 92mm fan may be louder than larger options
- Limited height restricts RAM clearance
- Lower cooling capacity for high-end CPUs
Good fit if
- You have a small form factor case
- You need low-profile cooling for compact builds
- You use mid-range Intel or AMD CPUs
Skip if
- You require extreme overclocking performance
- You have tall RAM sticks blocking clearance
- You prefer silent operation with larger fans
Verdict: SilverStone Argon 92mm Low-Profile Cooler fits users with small cases who need reliable cooling for mid-range processors. It is not suitable for extreme performance or tall RAM configurations.
Specifications side by side
| Spec | SilverStone Argon Low-Profile CPU Cooler |
|---|---|
| Socket Compatibility | Intel/AMD |
| Cooler Height | 58mm |
| Heat Pipes | 4 |
| Tower Design | Low Profile |
| Fan Size | 92mm |
| Dimensions | 4.13 × 3.62 × 2.28 inches |
| Weight | 14.8 ounces |
| Color | SST-AR06 |
| Model | 90115 |
Frequently asked questions
Is the SilverStone Argon good for gaming?
Yes, for mid-range processors in compact builds. The 92mm fan provides reliable cooling for typical gaming loads. It is not suitable for extreme performance needs. You should verify your case clearance, as the 58mm height is tight. This cooler fits users who prioritize small form factor builds over maximum thermal headroom.
Will this cooler fit in my small case?
It fits cases with limited vertical clearance. The cooler stands at 58mm tall and weighs 14.8 ounces. Its compact footprint allows it to fit where larger fans would not clear RAM. Always measure the space above your CPU socket carefully before purchasing to ensure compatibility with your specific chassis.
Does the SilverStone Argon support tall RAM sticks?
No, it is not suitable for tall RAM configurations. The 92mm fan sits low on the tower. You must ensure no tall RAM sticks block the fan. This design choice prioritizes case compatibility over memory clearance. Check your RAM height against the cooler's dimensions before buying.
What is the weight of the SilverStone Argon cooler?
The unit weighs 14.8 ounces. This lightweight design is typical for low-profile coolers. It measures 4.13 inches in length and 3.62 inches in width. The compact size and weight make it suitable for ITX builds where heavy coolers might stress the motherboard or case.
Is this cooler suitable for overclocking?
No, it is not designed for extreme performance. The SilverStone Argon is best for mid-range processors. It provides reliable cooling but lacks the thermal capacity for heavy overclocking. You should consider this cooler for stock speeds in small form factor systems rather than for high-performance tuning.
What mounting pattern does the SilverStone Argon use?
The motherboard must have a mounting hole pattern for both Intel and AMD sockets. You need to check your specific motherboard compatibility before purchase. The cooler is designed for standard low-profile mounting solutions. Verify that your board supports the necessary hardware for secure installation.