Psyqtsuary 2 PCS 12 CM Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are looking for psyqtsuary 2 pcs 12 cm alternatives because this product is a specialized mounting solution. The Psyqtsuary 12cm CPU Fan Clips provide durable stainless steel hardware for securing 12cm fans to radiators. They measure 5.91 inches in length and weigh only 2 grams each. This design ensures a precise fit for standard fans while resisting rust and high temperatures. The clips are lightweight and easy to install without complex operations.
However, you might need a different spec or feature for your build. Some users require a complete cooling unit rather than just mounting hardware. Others may need compatibility with legacy sockets like LGA 775 or Socket 478. Some might prefer a fan duct kit for small form factor cases or a specialized console fan. The 6 alternatives listed here were chosen because their specifications overlap with the original in terms of fan compatibility or cooling function. This list covers various needs, from retro system repairs to modern airflow optimization. Each pick addresses a specific use case where the original clips may not suffice.
Our top pick: Psyqtsuary 12cm CPU Fan Clips (2 Pack).
How these alternatives differ
Noctua SFF Foam CPU Cooler Fan Duct Kit
The Noctua NA-FD1 Fan Duct Kit serves a different purpose than the Psyqtsuary clips. While the clips secure fans to radiators, this duct optimizes airflow for small form factor builds using Noctua low-profile coolers. It measures 4.72 inches long and weighs 1.9 ounces. You choose this if you need directed airflow in tight spaces rather than mounting hardware. It does not replace lost clips. It is a performance accessory for specific cooler and case combinations. The black finish matches typical builds. This is not a general-purpose mounting solution. It requires compatible Noctua coolers to function. You gain better thermal efficiency in constrained spaces but lose the ability to mount standard 12cm fans directly.
StarTech.com 65x60x45mm Socket 7/370 CPU Cooler
The StarTech Socket 7/370 CPU Cooler is a complete cooling unit, not a mounting clip. It measures 65x60x45mm and weighs 4.8 ounces. This product is designed for retro Socket 7 or 370 systems where specific connectors are required. You pick this if you need to replace a failed cooler on vintage hardware. It does not help with modern 12cm fan mounting. The StarTech unit provides full cooling for legacy processors. The Psyqtsuary clips only hold fans in place. This alternative is niche and irrelevant for current PC builds. It fits older motherboards exclusively. You get a functional cooler for old systems but no utility for new hardware assembly.
Ultra Socket 775 Copper Core CPU Cooler
The Ultra P4 LGA 775 Copper Core Cooler is a full heatsink and fan assembly. It measures 9.7 inches long and weighs 1 pound. This unit is built for LGA 775 socket upgrades on older Intel desktops. You select this if you need thermal performance for legacy systems. It does not serve as a clip for 12cm fans. The copper core provides efficient heat dissipation for older CPUs. The Psyqtsuary clips are lightweight stainless steel hardware. This alternative is a heavy, complete cooling solution. It is incompatible with modern sockets. You gain solid cooling for vintage builds but cannot use it for current motherboard fan mounting. It is a dedicated component for specific legacy platforms.
Evercool Wii Cooling Fan
The Evercool Fii Turbo Cooling Fan is designed for Nintendo Wii consoles, not PC cases. It is a specialized part for console repair. You choose this if you are fixing a Wii, not building a computer. It does not mount 12cm fans to radiators. The Evercool unit fits inside a game console chassis. The Psyqtsuary clips are for standard PC fan mounting. This alternative is irrelevant for desktop builders. You get a console-specific fan but no utility for PC hardware. It lacks the dimensions and mounting style for computer cases. This is a niche repair part. You cannot use it to secure fans to CPU radiators in a desktop environment.
Quick picks
Our 7 picks
Psyqtsuary 12cm CPU Fan Clips (2 Pack)
Best for: Replacing lost or damaged 12cm fan clips
- Features
- Fan
- Dimensions
- 5.91 × 3.94 × 0.63 inches
View on Amazon: Psyqtsuary 12cm CPU Fan Clips (2 Pack) Affiliate link
You get two stainless steel clips designed to secure 12cm fans to radiators. Each clip measures 12cm in length and weighs just 2 grams. The material resists high temperatures and rust. You can easily attach them to outer fixing holes without complex tools. This set helps maintain proper CPU operation by keeping fans firmly in place for better heat dissipation.
Pros
- Made of durable stainless steel for sturdiness
- Lightweight design at only 2 grams per clip
- Simple clip-on installation process
- Resists high temperatures without losing shape
Cons
- Does not include the fan or heatsink
- Limited to standard 12cm fan mounting
- No adjustment mechanism for non-standard sizes
Good fit if
- You need to replace missing fan clips
- You are building a standard 12cm cooling setup
- You want a rust-resistant mounting solution
Skip if
- You need the fan or heatsink included
- You are using fans larger than 12cm
- You require adjustable or tool-less mounting
Verdict: Psyqtsuary 12cm CPU Fan Clips (2 Pack) fits users who need reliable, rust-resistant mounting hardware for standard 12cm fans. It is a practical hardware addition for builders who already have their cooling components. This product is not a complete cooling solution.
Noctua SFF Foam CPU Cooler Fan Duct Kit
Best for: optimizing airflow in SFF builds with Noctua coolers
- Features
- Fan
- Dimensions
- 4.72 × 3.9 × 1.89 inches
- Weight
- 1.9 ounces
View on Amazon: Noctua SFF Foam CPU Cooler Fan Duct Kit Affiliate link
This is a modular fan duct kit designed for small form factor PCs. It uses EVA foam spacers to bridge the gap between the fan and case panels. The spacers adjust from 5 to 45mm in 1mm increments. This setup helps the cooler draw fresh air from the outside. It improves cooling performance by up to 5°C. It fits specific Noctua NH-L9 and NH-L9a series coolers.
Pros
- Modular EVA foam spacers adjust from 5 to 45mm
- Improves cooling performance by up to 5°C
- Compatible with NH-L9i and NH-L9a series coolers
Cons
- Only compatible with specific Noctua NH-L9 and NH-L9a models
- Does not include the fan or heatsink
- Limited to small form factor cases like Dan A4-SFX
Good fit if
- You use a small form factor case with perforated panels
- You own a compatible Noctua low-profile cooler
- You want to improve airflow in a tight build
Skip if
- You need a complete cooling solution with fan and heatsink
- You use a standard ATX case without perforated panels
- You have a cooler model not listed as compatible
Verdict: Noctua NA-FD1 Fan Duct Kit is a specialized accessory for users with compatible Noctua low-profile coolers in small form factor cases. It provides a tangible performance boost by optimizing airflow in tight spaces.
StarTech.com 65x60x45mm Socket 7/370 CPU Cooler
Best for: retro Socket 7/370 systems
- Socket Compatibility
- Socket 7/370
- Features
- Fan
- Weight
- 4.8 ounces
View on Amazon: StarTech.com 65x60x45mm Socket 7/370 CPU Cooler Affiliate link
This StarTech.com fan is designed for legacy Socket 7 and Socket 370 processors. It measures 65x60x45mm and weighs 4.8 ounces. The unit includes a heatsink and a TX3 connector for direct motherboard attachment. It is a black, single-fan solution. You should choose this if you are maintaining older hardware that requires specific socket compatibility and a compact, low-profile cooling device.
Pros
- Compatible with Socket 7 and Socket 370
- Compact 65x60x45mm dimensions
- Includes TX3 connector
- Lightweight at 4.8 ounces
Cons
- Limited to older Socket 7/370 platforms
- Small heatsink surface area
- Single fan configuration
Good fit if
- You need a replacement cooler for a Socket 7 or 370 motherboard
- You are building a retro PC with space constraints
- You require a direct TX3 connection
Skip if
- You have a modern Socket LGA or AM4/AM5 CPU
- You need high airflow for current-generation processors
- You prefer PWM fan control
Verdict: StarTech Socket 7/370 CPU Cooler is a niche component for retro builders. It fits users who must replace a failed cooler on vintage Socket 7 or 370 systems where specific connectors are required.
Ultra Socket 775 Copper Core CPU Cooler
Best for: LGA 775 socket cooling upgrades
- Socket Compatibility
- Socket 775
- Fan Speed
- 3600 RPM
- Material
- Copper
- Features
- Fan
- Dimensions
- 9.7 × 3.7 × 7.1 inches
- Weight
- 1 pounds
View on Amazon: Ultra Socket 775 Copper Core CPU Cooler Affiliate link
The Ultra P4 is a CPU cooler designed for LGA 775 sockets. It features a copper core heatsink with aluminum fins for efficient heat transfer. The included fan runs at 3600 RPM and supports PWM speed control. It uses a sleeve bearing for operation. This unit weighs 1 pound and measures 9.7 inches in length. It suits users needing reliable cooling for older Intel platforms.
Pros
- Copper core heatsink construction
- Aluminum fins for surface area
- 3600 RPM fan speed
- PWM fan speed control
Cons
- Sleeve bearing limits lifespan compared to fluid dynamic bearings
- Socket compatibility restricted to LGA 775 only
- Heatsink height of 7.1 inches may not fit small cases
Good fit if
- You are building or maintaining a system with an LGA 775 processor
- You need a direct copper core for better thermal conductivity
- You want PWM fan control for adjustable noise levels
Skip if
- You use a modern socket like LGA 1700 or AM5
- You require a large case for high-end air cooling
- You need a cooler with a long-lasting fluid dynamic bearing
Verdict: The Ultra P4 LGA 775 Copper Core Cooler provides solid thermal performance for legacy Intel systems. It is a practical fit for users upgrading older desktops who prioritize copper core efficiency over modern socket compatibility.
Socket 478 Aluminum 70mm CPU Cooler
Best for: legacy Socket 478 Intel Pentium systems
- Socket Compatibility
- Socket 478
- Fan Size
- 70 mm
- Features
- Fan
View on Amazon: Socket 478 Aluminum 70mm CPU Cooler Affiliate link
This Socket 478 cooler uses an aluminum heat sink paired with a 70 mm sleeve bearing fan. It supports Intel Pentium processors up to 3.2 GHz and Celeron Duo up to 2.8 GHz. The fan runs at 3500 RPM with a 3-pin connector. It suits users maintaining older Socket 478 systems who need a basic, reliable cooling solution for low-to-mid heat output.
Pros
- Aluminum heat sink for passive cooling
- 70 mm fan with 3500 RPM speed
- Compatible with Socket 478 Intel CPUs
- Rated 10,000 hour fan lifetime
Cons
- Small 70 mm fan limits airflow
- Only fits legacy Socket 478 CPUs
- Sleeve bearing fan has shorter life than fluid dynamic bearings
Good fit if
- You are upgrading a Socket 478 Pentium or Celeron system
- You need a low-profile cooler for a small form factor case
- You want a simple 3-pin fan connection
Skip if
- You use a modern CPU socket like LGA 1700 or AM5
- You need high airflow for overclocking
- You prefer quiet operation below 3500 RPM
Verdict: Socket 478 Aluminum Heatsink Fan is a basic cooling option for older Intel Pentium or Celeron Duo processors. It fits Socket 478 motherboards and provides adequate cooling for stock speeds up to 3.2 GHz.
StarTech.com 50mm Socket 7/370 Aluminum Cooler
Best for: retro Socket 7 and 370 builds
- Socket Compatibility
- Socket 370, Socket 7
- Fan Size
- 50 mm
- Color
- Black
- Material
- Aluminum
- Features
- Fan
- Dimensions
- 1.97 × 1.61 × 1.97 inches
View on Amazon: StarTech.com 50mm Socket 7/370 Aluminum Cooler Affiliate link
This StarTech.com heatsink is built for legacy Socket 7 and Socket 370 processors. It features a 50 mm fan and an aluminum construction. The compact 50x50x41 mm footprint fits small form factor builds or retro systems. You get a black finish and a lightweight design at 8 ounces. It is a straightforward cooling solution for older hardware without modern mounting complexity.
Pros
- Compatible with Socket 7 and Socket 370 CPUs
- Compact 50 mm fan size
- Aluminum heatsink material
- Black color finish
Cons
- Very small 50 mm fan limits airflow
- Only supports legacy Socket 7 and 370
- No copper heat pipes mentioned
Good fit if
- You are building a retro PC with Socket 7 or 370
- You need a compact cooler for a small case
- You require a black finish for your build
Skip if
- You have a modern Socket LGA or AM5 CPU
- You need high airflow for a high-TDP processor
- You require a larger 120 mm fan for better cooling
Verdict: StarTech.com 50mm Socket 7 CPU Cooler is a niche part for retro builders. It fits Socket 7 and 370 systems where space is tight. It does not suit modern high-performance builds.
Evercool Wii Cooling Fan
Best for: Nintendo Wii console cooling
- Features
- Fan
View on Amazon: Evercool Wii Cooling Fan Affiliate link
This Evercool fan is designed for Nintendo Wii consoles. It features a Turbo Cooling Fan function. The model is TG-W1. It is a dedicated fan component. You need it if your Wii requires replacement cooling. It is not a CPU cooler. It does not fit standard computer cases. It is for gaming console maintenance.
Pros
- Specific model TG-W1
- Turbo Cooling Fan function
- Designed for Nintendo Wii
Cons
- Not a CPU cooler
- Console-specific use only
- Limited compatibility with PCs
Good fit if
- You own a Nintendo Wii
- You need a replacement fan
- You want turbo cooling
Skip if
- You build a PC
- You cool a CPU
- You need a heatsink
Verdict: Evercool Fii Turbo Cooling Fan is a specialized part for Wii consoles. It fits users needing console repair, not PC builders.
Specifications side by side
| Spec | Psyqtsuary 12cm CPU Fan Clips (2 Pack) | Noctua SFF Foam CPU Cooler Fan Duct Kit | StarTech.com 65x60x45mm Socket 7/370 CPU Cooler | Ultra Socket 775 Copper Core CPU Cooler | Socket 478 Aluminum 70mm CPU Cooler | StarTech.com 50mm Socket 7/370 Aluminum Cooler | Evercool Wii Cooling Fan |
|---|---|---|---|---|---|---|---|
| Socket Compatibility | not stated | not stated | Socket 7/370 | Socket 775 | Socket 478 | Socket 370, Socket 7 | not stated |
| Fan Size | not stated | not stated | not stated | not stated | 70 mm | 50 mm | not stated |
| Fan Speed | not stated | not stated | not stated | 3600 RPM | not stated | not stated | not stated |
| Color | not stated | Black | Black | not stated | not stated | Black | not stated |
| Material | not stated | not stated | not stated | Copper | not stated | Aluminum | not stated |
| Features | Fan | Fan | Fan | Fan | Fan | Fan | Fan |
| Dimensions | 5.91 × 3.94 × 0.63 inches | 4.72 × 3.9 × 1.89 inches | not stated | 9.7 × 3.7 × 7.1 inches | not stated | 1.97 × 1.61 × 1.97 inches | not stated |
| Weight | not stated | 1.9 ounces | 4.8 ounces | 1 pounds | not stated | 8 ounces | not stated |
| Model | 654393_2_sNBp149hc | NA-FD1 | FAN370PRO | ult31797 | not stated | FANP1003LD | not stated |
| Size | not stated | One Size | 65x60x45mm | not stated | not stated | not stated | not stated |
Looking beyond this list? See yelodeer 2 PCs dual voltage alternatives.
Frequently asked questions
Can I use these alternatives to replace missing clips for my 12cm fans?
Yes, the Psyqtsuary 12cm CPU Fan Clips are designed specifically for this task. They provide rust-resistant mounting hardware for standard 12cm fans. The pack includes two clips, each measuring 5.91 inches in length. This makes them a practical addition for builders who already have their cooling components but need reliable hardware.
What is the best option for optimizing airflow in a small form factor build?
The Noctua NA-FD1 Fan Duct Kit is the best choice for small form factor builds. It is a specialized accessory for users with compatible Noctua low-profile coolers. The kit measures 4.72 inches long and weighs 1.9 ounces. It provides a tangible performance boost by optimizing airflow in tight spaces.
Which cooler is suitable for retro Socket 7 systems?
The StarTech.com 65x60x45mm Socket 7/370 CPU Cooler is suitable for retro builds. It fits users who must replace a failed cooler on vintage Socket 7 or 370 systems. The model FAN370PRO is designed for specific connectors required by these older systems. It is a niche component for legacy hardware enthusiasts.
Is there a copper core cooler available for LGA 775 motherboards?
Yes, the Ultra Socket 775 Copper Core CPU Cooler is available for LGA 775 systems. It provides solid thermal performance for legacy Intel systems. The cooler features a copper core for efficiency. It measures 9.7 inches in length and weighs 1 pound, making it a practical fit for upgrading older desktops.
What is a budget-friendly option for Socket 478 processors?
The Socket 478 Aluminum 70mm CPU Cooler is a budget-friendly option for older Intel Pentium systems. It fits Socket 478 motherboards and provides adequate cooling for stock speeds up to 3.2 GHz. This basic cooling option is ideal for users maintaining legacy hardware without needing advanced thermal performance.
Can I use these products to cool a Nintendo Wii console?
The Evercool Wii Cooling Fan is designed specifically for Nintendo Wii consoles. It fits users needing console repair rather than PC building. This specialized part addresses the unique thermal requirements of the Wii. It is not intended for standard desktop computer cooling applications.
Which cooler is best for tight spaces in retro Socket 7 builds?
The StarTech.com 50mm Socket 7 Aluminum Cooler is best for tight spaces. It fits Socket 7 and 370 systems where space is limited. The model FANP1003LD measures 1.97 inches in length and width. It does not suit modern high-performance builds but is ideal for compact retro configurations.