PCCOOLER Dual Tower ARGB CPU Cooler Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This pccooler rt720tc argb CPU air review examines a dual-tower cooler rated for 270W TDP. It uses seven 6mm copper heat pipes and a reflow-soldered base to handle high thermal loads. The unit includes dual 120mm PWM fans that reach 2200 RPM for strong airflow. You get ARGB lighting that syncs with major motherboard suites. The total height is 157.5mm, which fits most ATX mid-tower cases but requires checking your clearance. This guide breaks down the specs to help you decide if this build fits your setup.
What stands out
- Seven 6mm copper heat pipes with a reflow-soldered base for efficient heat transfer.
- Dual 120mm PWM hydraulic fans delivering up to 2200 RPM and 34.9 dBA noise level.
- 270W TDP rating tested on high-end chips like the Ryzen 7 7800X3D.
- ARGB lighting compatible with ASUS Aura, MSI Mystic Light, Gigabyte RGB Fusion, and ASRock Polychrome.
Who it fits
Good fit for
This cooler suits users building high-performance gaming or streaming PCs with Intel LGA1700/1851 or AMD AM4/AM5 processors. If you have an ATX mid-tower case with at least 160mm of CPU cooler clearance, this dual-tower design fits well. The 270W thermal rating handles heavy workloads like 3D rendering. You also get all necessary mounting hardware and thermal paste, making installation straightforward for standard desktop builds.
Who should skip it
You should skip this option if you are building in a small form factor or mini-ITX case. The 157.5mm height exceeds the clearance limits of many SFF chassis. Additionally, the asymmetric fin design covers RAM slots, so you must install memory before mounting the cooler. If your motherboard has M.2 SSD slots in close proximity, access may be limited. Users needing a low-profile solution will find this too large for their case.
Verdict: The PCCOOLER RT720TC ARGB is a capable dual-tower cooler for high-TDP CPUs in standard ATX cases. Its seven-heat-pipe design and included mounting hardware make it a practical choice for enthusiasts who prioritize thermal performance and lighting sync.
Key specs explained for this cooler
270W TDP Rating
This rating indicates the continuous thermal dissipation capacity. It suggests the cooler can handle high-end processors like the Ryzen 7 7800X3D or Core i7-14700K under heavy loads. You should match this to your CPU's power draw. If your processor exceeds this limit, consider a larger solution. This metric helps you avoid thermal throttling during sustained rendering or gaming sessions.
7 Heat Pipes
The unit uses seven 6mm copper pipes with a reflow-soldered base. More pipes generally improve heat transfer from the CPU to the fins. This layout exceeds standard six-pipe competitors. It allows for faster heat distribution across the dual-tower fin stack. You benefit from more stable temperatures under load. Compare this count with other air coolers to gauge potential efficiency gains.
157.5mm Cooler Height
This total height determines case compatibility. It fits most ATX mid-tower cases with at least 160mm clearance. Verify your case specs before buying. It may not fit small form factor or mini-ITX builds. The asymmetric fin design also covers RAM slots. You must install memory modules before mounting the cooler. Check your case manual to ensure sufficient vertical space for installation.
2200 RPM Fan Speed
This is the maximum rotational speed for the dual 120mm PWM fans. Higher speeds increase airflow and static pressure. The unit reaches 34.9 dBA at this peak. Typical gaming loads run around 1500 RPM for quieter operation. PWM control adjusts speed based on CPU temperature. You get automatic cooling adjustment without manual intervention. Compare max RPM to understand the noise-to-performance trade-off.
Design and Build Quality
The listing describes a dual-tower layout featuring seven 6mm copper heat pipes. These pipes are reflow-soldered to a nickel-plated copper base. This construction aims to resist oxidation and improve heat transfer efficiency. The aluminum fins use a wave-shaped design to maximize surface area. This geometry supports the stated 270W thermal dissipation rating.
The unit measures 157.5mm in height, which equals 10 inches. It weighs 2 pounds and spans 6.5 inches in width and length. This size requires at least 160mm of clearance in most ATX mid-tower cases. The asymmetric fin design covers RAM slots. You must install memory modules before mounting the cooler. The height may exceed limits in small form factor or mini-ITX chassis.
Two 120mm PWM hydraulic bearing fans are included. They operate between 500 and 2200 RPM. The listing states noise levels range from 27dB to 34.9dBA. The cooler features ARGB lighting that syncs with major motherboard suites. The minimalist black finish and reinforced steel structure provide a clean aesthetic. This build suits users with standard tower cases who need robust cooling for high-end processors.
Setup and Everyday Use
Installation begins with verifying case clearance. The cooler stands 157.5mm tall. You need at least 160mm of space in your mid-tower chassis. The asymmetric fin design covers RAM slots. You must install memory modules before mounting the cooler. Check your motherboard for M.2 SSD locations. Access may be limited on some boards. Verify slot positions to avoid conflicts.
The mounting system is pre-assembled. It supports Intel LGA1851, 1700, 1200, and 115X sockets. It also fits AMD AM5 and AM4 platforms. The box includes all necessary hardware. You receive an L-shaped screwdriver and thermal paste. No extra purchases are required. The manual uses illustrated steps for visual guidance. For AM5 users, the offset mounting frame is recommended. This ensures optimal CPU contact and helps reduce temperatures.
In daily use, the dual 120mm PWM fans adjust speed based on CPU temperature. They operate between 500 and 2200 RPM. At typical gaming loads of 1500 RPM, noise measures approximately 27dB. Maximum speed reaches 2200 RPM, producing 34.9dBA. The acoustic output remains consistent without high-frequency whine. The ARGB lighting syncs with major motherboard software suites. This includes ASUS Aura, MSI Mystic Light, Gigabyte RGB Fusion, and ASRock Polychrome. The minimalist black design fits standard PC builds. The steel structure provides a reinforced frame for long-term stability.
What To Check Before Buying
You need a case with at least 160mm of CPU cooler clearance for this 157.5mm unit. The asymmetric fin design covers RAM slots, so you must install memory before mounting the cooler. Check your motherboard’s M.2 SSD slot location, as access may be limited. This cooler fits Intel LGA1851/1700/1200/115X and AMD AM5/AM4 sockets. For AM5, use the offset mounting frame for better contact. The included thermal paste and tools mean no extra purchases are needed. Keep the fans free of dust to maintain the 270W TDP rating. This option suits high-end builds needing strong cooling. It fits alongside other air coolers for users prioritizing thermal performance over silence. If you need quiet operation, consider lower RPM options. This model balances power and RGB sync for ASUS, MSI, Gigabyte, and ASRock systems. Verify your chassis dimensions carefully. The steel structure adds weight, so ensure your motherboard supports the load. This guide helps you choose the right air cooler for your specific hardware constraints.
Check before you buy
- Verify case clearance is at least 160mm tall.
- Install RAM before mounting the asymmetric fin tower.
- Check M.2 SSD slot location for interference.
- Confirm socket compatibility for your specific CPU.
- Use the AM5 offset frame for optimal contact.
The product at a glance
PCCOOLER Dual Tower ARGB CPU Cooler
Best for: High-TDP CPUs in mid-tower cases
- Socket Compatibility
- LGA 1851/1700/1200/115x, AM5/AM4
- Cooler Height
- 157.5mm
- Heat Pipes
- 7
- Tower Design
- Dual-Tower
- Fan Size
- 120mm
- TDP Rating
- 270W
View on Amazon: PCCOOLER Dual Tower ARGB CPU Cooler Affiliate link
This dual-tower air cooler handles 270W TDP loads using seven 6mm copper heat pipes and a reflow-soldered base. It uses two 120mm PWM fans to move 73.32 CFM of air. The unit stands 157.5mm tall, so you need a mid-tower case with at least 160mm clearance. It syncs ARGB lighting with major motherboard suites. This setup suits builders who need strong cooling for high-end CPUs like the Ryzen 7 7800X3D or Core i7-14700K.
Pros
- Seven 6mm copper heat pipes for high heat transfer
- 270W TDP rating for demanding workloads
- ARGB syncs with ASUS, MSI, Gigabyte, and ASRock
- Quiet operation at 27dB during typical gaming loads
- Pre-assembled mounting hardware included for easy installation
Cons
- 157.5mm height limits use in small form factor cases
- Asymmetric fin design may block RAM slots
- Illustrated manual only, no digital guide
Good fit if
- You have a mid-tower case with 160mm+ clearance
- You run high-TDP CPUs like the 14700K
- You want ARGB lighting that syncs with your motherboard
Skip if
- You use a mini-ITX or SFF chassis
- You have low-profile RAM that blocks the fins
- You need a digital installation manual
Verdict: PCCOOLER RT720TC ARGB Dual Tower delivers strong cooling for 270W processors in standard mid-tower cases. It fits users who prioritize thermal performance and RGB sync over compact dimensions.
Specifications side by side
| Spec | PCCOOLER Dual Tower ARGB CPU Cooler |
|---|---|
| Socket Compatibility | LGA 1851/1700/1200/115x, AM5/AM4 |
| Cooler Height | 157.5mm |
| Heat Pipes | 7 |
| Tower Design | Dual-Tower |
| Fan Size | 120mm |
| TDP Rating | 270W |
| Fan Speed | 2200RPM |
| Lighting | ARGB |
| Dimensions | 6.5 × 6.5 × 10 inches |
| Weight | 2 pounds |
| Color | ARGB |
| Model | RT720 TC ARGB |
Frequently asked questions
Does the PCCOOLER RT720TC fit in standard mid-tower cases?
Yes, it fits most mid-tower cases, but you must verify clearance. The cooler stands 10 inches tall, which equals 254mm. You need at least 160mm of CPU cooler clearance in your chassis. Always measure your case interior before purchasing to ensure the unit does not interfere with side panels or other components.
How many heat pipes does this cooler use?
It uses seven heat pipes. These pipes are 6mm in diameter and made of copper. They are reflow-soldered to the base for efficient heat transfer. This configuration helps dissipate heat from high-TDP processors effectively, supporting the rated 270W thermal capacity under heavy workloads.
Can I install RAM after mounting this cooler?
No, you should install RAM before mounting the cooler. The asymmetric fin design covers the RAM slots. This layout obstructs access to memory modules once the cooler is secured to the motherboard. Plan your build sequence carefully to avoid needing to remove the cooler later.
What is the maximum fan speed for the included fans?
The dual 120mm PWM fans reach a maximum speed of 2200 RPM. This speed provides strong airflow for cooling performance. You can control the speed via your motherboard’s PWM header for noise management. Higher RPMs increase airflow but may also increase acoustic output during intensive tasks.
Is the base material copper?
Yes, the base is made of nickel-plated copper. This material offers high thermal conductivity for rapid heat absorption from the CPU. The nickel plating helps resist oxidation over time. The heat pipes are also copper, ensuring efficient heat transport from the base to the aluminum fins.
What is the weight of the cooler?
The unit weighs 2 pounds. This weight is distributed across the dual towers and heat pipes. Ensure your motherboard’s CPU socket supports this load. Heavy coolers can stress the socket if not mounted evenly. Follow the manufacturer’s torque specifications during installation to prevent damage.