Pastall 30 PCS Raspberry Pi Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Pastall 30 PCS Raspberry Pi Heatsink Kit offers a broad selection of aluminum and copper options for various Raspberry Pi models. If you are looking for pastall 30 PCs raspberry pi alternatives, you might need a different configuration or material. This original kit includes thermal conductive adhesive tape and fits models A through 5. It weighs 1.27 ounces and provides a complete set for multiple boards. Some users prefer pure copper for better conductivity or specific sizes for compact cases. Others may need active cooling solutions with fan mounts for higher performance. The alternatives listed here were chosen because their specs overlap with the original product. Each option shares compatibility with Raspberry Pi devices and includes thermal management features like adhesive backing. You can compare the weight, dimensions, and material composition to find the best fit for your build. This guide helps you navigate the variations in heatsink designs and capacities available on the market.
How alternatives compare to Pastall
Easycargo 20-Piece Copper and Aluminum Heatsink Kit
The Easycargo kit uses a smaller set of twenty heatsinks, cutting the quantity in half compared to the Pastall thirty-piece option. It mixes copper and aluminum materials, similar to Pastall, but relies on thermal tape for installation. At 0.64 ounces, it is significantly lighter than the Pastall kit, which weighs 1.27 ounces. This makes it easier to handle for simple projects. You should choose this if you need a compact, budget-friendly solution for a single board rather than a large inventory for multiple Raspberry Pi models.
Geekworm 12mm Aluminum CM4 Heatsink
The Geekworm heatsink targets the Compute Module 4 specifically, unlike the Pastall kit which supports various Raspberry Pi board versions. It features a larger footprint of 2.13 by 1.54 inches and a height of 0.47 inches, designed to accommodate a 30 mm fan for active cooling. The Pastall option is purely passive. If you are building with a Compute Module 4 and need active airflow rather than passive dissipation, this dedicated aluminum heatsink is the better choice over the general-purpose Pastall kit.
GeeekPi 102-Piece Aluminum and Copper Heatsink Kit
The GeeekPi 102-piece kit offers a massive variety of heatsinks, far exceeding the Pastall thirty-piece count. It includes aluminum and copper options suitable for cooling not just Raspberry Pi boards, but also VRM, VRAM, and laptop components. At 7.83 ounces, it is much heavier than the Pastall kit. This extensive collection is ideal for users cooling multiple chips or complex systems. You should pick this if you need a comprehensive inventory for various components, rather than just standard Raspberry Pi cooling.
GeeekPi 8PCS Copper Heatsinks
The GeeekPi 8-piece copper heatsink set focuses entirely on pure copper construction, differing from the Pastall mix of aluminum and copper. It contains only eight pieces, which is less than the Pastall thirty-piece kit. Weighing 1.41 ounces, it is slightly heavier than the Pastall option. This set is designed for Raspberry Pi 5 users who prioritize material quality and passive cooling efficiency over quantity. Choose this if you want high-conductivity copper blocks for a Pi 5 build without needing a large variety of sizes.
GeeekPi 18-Piece Pure Copper Heatsink Set
The GeeekPi 18-piece pure copper set offers a middle ground between the small 8-piece kit and the larger Pastall option. It uses only copper, providing consistent thermal conductivity, whereas the Pastall kit mixes metals. It includes eighteen pieces, which is fewer than the Pastall thirty-piece count. Weighing 2.47 ounces, it is heavier than the Pastall kit. This set is suitable for Raspberry Pi 4B and 5 users who want passive cooling with uniform copper material. Pick this if you prefer all-copper consistency over the mixed-metal variety of Pastall.
Haojiaho Raspberry Pi 4B Pure Copper Heatsink
The Haojiaho heatsink is a single-unit solution for the Raspberry Pi 4B, contrasting with the Pastall kit that includes multiple sizes for various boards. It is made of pure copper and uses thermal tape for adhesion. Weighing just 0.71 ounces, it is lighter than the Pastall kit. This option is ideal for users who only need to cool a Pi 4B and prefer silent, passive operation. You should choose this if you have a specific Pi 4B build and do not need the broad compatibility and quantity offered by the Pastall kit.
Quick picks
Our 7 picks
Pastall 30 PCS Raspberry Pi Heatsink Kit
Best for: Users needing heatsinks for multiple Pi models
- Material
- Aluminum, Copper
- Compatible Device
- Raspberry Pi, Beaglebone
- Mounting Type
- Thermal Conductive Adhesive Tape
- Weight
- 1.27 ounces
View on Amazon: Pastall 30 PCS Raspberry Pi Heatsink Kit Affiliate link
This Pastall kit provides passive cooling for Raspberry Pi boards using 24 aluminum and 6 copper heatsinks. It includes thermal conductive adhesive tape for direct attachment. The set fits models A, B, B+, 2, 3, 4, and 5. It weighs 1.27 ounces. This option suits users who need a comprehensive cooling solution for multiple board types without complex assembly.
Pros
- Includes 24 aluminum and 6 copper heatsinks
- Fits Raspberry Pi models A through 5
- Comes with thermal conductive adhesive tape
- Compatible with most Raspberry Pi cases
Cons
- Uses passive cooling only
- Adhesive tape may leave residue
- Limited to specific board models
Good fit if
- You own multiple Raspberry Pi models
- You want a complete cooling kit
- You prefer passive heat dissipation
Skip if
- You need active fans
- You only have one Pi model
- You want reusable adhesive
Verdict: Pastall 30 PCS Raspberry Pi Heatsink Kit offers a broad range of heatsinks for various Pi models, making it ideal for users managing multiple boards or needing a full set for a single device.
Easycargo 20-Piece Copper and Aluminum Heatsink Kit
Best for: Simple adhesive cooling for Pi boards
- Material
- Aluminum + Copper
- Compatible Device
- Raspberry Pi 5 4 3 boards
- Mounting Type
- Pre-applied adhesive tape backing
- Features
- Thermal Tape
- Dimensions
- 0.55 × 0.55 × 0.28 inches
- Weight
- 0.64 ounces
View on Amazon: Easycargo 20-Piece Copper and Aluminum Heatsink Kit Affiliate link
This Easycargo kit includes 20 heatsinks for Raspberry Pi 5, 4, and 3 boards. It combines 15 aluminum pads with 5 copper shims to handle different thermal needs. Each piece uses pre-applied thermal conductive adhesive tape for easy installation. The mix of materials offers a practical cooling solution for various chips on your board. It is a straightforward option if you need a complete set without complex mounting hardware.
Pros
- Includes 20 heatsinks total
- Mix of aluminum and copper materials
- Pre-applied thermal adhesive tape
- Compatible with Pi 5, 4, and 3
Cons
- Limited to 20 pieces per kit
- Adhesive mounting only
- No thermal paste included
Good fit if
- You need a complete set for multiple boards
- You prefer simple adhesive installation
- You want mixed metal materials
Skip if
- You require thermal paste instead of tape
- You need more than 20 heatsinks
- You are cooling a PC CPU
Verdict: Easycargo 20pcs Pi Heatsink Kit provides a ready-to-use cooling set with mixed metals. It fits users who want a simple, adhesive-based solution for Raspberry Pi boards without extra tools.
Geekworm 12mm Aluminum CM4 Heatsink
Best for: Raspberry Pi Compute Module 4 active cooling
- Material
- Aluminum alloy
- Cooling Method
- Passive Cooling
- Compatible Device
- Raspberry Pi Compute Module 4 CM4
- Dimensions
- 54 x 39 x 12 mm
- Features
- Fan
- Weight
- 0.71 ounces
View on Amazon: Geekworm 12mm Aluminum CM4 Heatsink Affiliate link
This Geekworm heatsink is designed specifically for the Raspberry Pi Compute Module 4. It is built from aluminum alloy and measures 54 by 39 by 12 mm. The 12 mm thickness allows you to mount a 30 mm fan on top for active cooling. It includes a thermal pad you must cut to fit the CPU. It is a practical solution for users who need active cooling for their CM4 module.
Pros
- Made from aluminum alloy for efficient heat dissipation
- 12 mm height accommodates a 30 mm cooling fan
- Specifically sized for Raspberry Pi Compute Module 4
- Includes a thermal pad for CPU attachment
Cons
- Requires cutting the included thermal pad to fit
- Only supports one fan size (30 mm)
- Not compatible with standard Raspberry Pi boards
Good fit if
- You use a Raspberry Pi Compute Module 4
- You want to add a 30 mm fan for active cooling
- You need a dedicated heatsink for the CM4 CPU
Skip if
- You have a standard Raspberry Pi 4 or 5 board
- You prefer passive cooling without any fans
- You need a heatsink for a different compute module
Verdict: Geekworm CM4 Aluminum Heatsink 12mm is a solid choice for Compute Module 4 owners who need active cooling. It fits the module perfectly and supports a 30 mm fan for better thermal performance.
GeeekPi 102-Piece Aluminum and Copper Heatsink Kit
Best for: cooling multiple Raspberry Pi chips
- Material
- Aluminum, Copper
- Compatible Device
- Raspberry Pi, CPU, GPU, Laptop
- Mounting Type
- Thermal conductive adhesive tape
- Dimensions
- 1.57 × 1.57 × 0.43 inches
- Weight
- 7.83 ounces
View on Amazon: GeeekPi 102-Piece Aluminum and Copper Heatsink Kit Affiliate link
This kit includes 102 heatsinks for cooling Raspberry Pi components like VRM, VRAM, and CPU. It contains 92 aluminum and 10 copper pieces in various sizes. The set uses thermal conductive adhesive tape for mounting. It fits in a storage box. You get a wide range of sizes for different electronics. This suits users needing extensive cooling options for multiple chips.
Pros
- Includes 102 heatsinks for comprehensive coverage
- Contains 10 pure copper heatsinks for high heat
- Comes with a storage box for organization
- Uses thermal conductive adhesive tape for mounting
Cons
- Adhesive tape may leave residue on surfaces
- No screws or mechanical mounting hardware included
- Large quantity requires sorting by size
Good fit if
- You need to cool multiple Raspberry Pi chips
- You want copper heatsinks for high heat areas
- You prefer organized storage for small parts
Skip if
- You only need cooling for one component
- You prefer screw-mounted heatsinks for stability
- You want a single large heatsink design
Verdict: GeeekPi 102-Piece Heatsink Kit provides a massive variety of aluminum and copper options. It is ideal for users cooling multiple Raspberry Pi components like VRM and VRAM with adhesive tape.
GeeekPi 8PCS Copper Heatsinks
Best for: Lightweight passive cooling for Pi 5
- Material
- Pure Copper
- Compatible Device
- Raspberry Pi 5
- Mounting Type
- Thermal Conductive Adhesive Tape
- Weight
- 1.41 ounces
View on Amazon: GeeekPi 8PCS Copper Heatsinks Affiliate link
This kit includes eight pure copper heatsinks designed for the Raspberry Pi 5. It relies on thermal conductive adhesive tape for direct mounting. The unit weighs 1.41 ounces. You get a simple passive cooling solution without moving parts. It suits users who want a lightweight, low-profile fix for their board. The setup requires peeling the tape before application.
Pros
- Pure copper material for strong heat dissipation
- Specifically compatible with Raspberry Pi 5
- Lightweight at 1.41 ounces
- Includes thermal conductive adhesive tape
Cons
- Only includes eight heatsinks, covering fewer chips than larger kits
- Requires manual application of adhesive tape
- Does not include the Raspberry Pi 5 board
Good fit if
- You need a lightweight passive cooling solution
- You want pure copper for better conductivity
- You are building a compact Raspberry Pi 5 setup
Skip if
- You need a complete kit with more heatsinks
- You prefer fan-based active cooling
- You want a pre-assembled unit
Verdict: GeeekPi 8PCS Pure Copper Heatsinks offers a lightweight, passive cooling option for Raspberry Pi 5 users who prioritize material quality over quantity. It fits builders who want to manage heat with simple copper blocks rather than complex fan systems.
GeeekPi 18-Piece Pure Copper Heatsink Set
Best for: Pure copper passive cooling for Pi 5 and 4B
- Material
- Pure Copper
- Compatible Device
- Raspberry Pi 5/4B
- Mounting Type
- Thermal Conductive Adhesive Tape
- Weight
- 2.47 ounces
View on Amazon: GeeekPi 18-Piece Pure Copper Heatsink Set Affiliate link
This kit includes 18 pure copper heatsinks for Raspberry Pi 5 and 4 Model B boards. The material offers strong thermal conductivity. Each piece uses thermal conductive adhesive tape for mounting. You must remove the tape backing before application. The set weighs 2.47 ounces. It is designed for users who need reliable passive cooling for their single-board computers without adding fans.
Pros
- Made from pure copper for effective heat dissipation
- Includes 18 heatsinks for comprehensive coverage
- Compatible with Raspberry Pi 5 and 4 Model B
- Mounts easily with thermal conductive adhesive tape
Cons
- Requires manual removal of adhesive tape backing
- Does not include the Raspberry Pi board itself
- Passive cooling only, no active fan support
Good fit if
- You want pure copper heatsinks for better heat transfer
- You need cooling for both Pi 5 and Pi 4B
- You prefer simple adhesive mounting over screws
Skip if
- You need active cooling with fans
- You want a kit that includes the board
- You prefer aluminum over copper material
Verdict: GeeekPi 18PCS Copper Heatsinks for Raspberry Pi provides solid passive cooling for Pi 5 and 4B users. It suits those who prioritize copper conductivity and simple adhesive installation over active airflow solutions.
Haojiaho Raspberry Pi 4B Pure Copper Heatsink
Best for: Silent cooling on Raspberry Pi 4B
- Material
- Pure copper
- Compatible Device
- Raspberry Pi 4B
- Mounting Type
- Adhesive tape
- Features
- Thermal Tape
- Weight
- 0.71 ounces
View on Amazon: Haojiaho Raspberry Pi 4B Pure Copper Heatsink Affiliate link
This Haojiaho kit uses 100% pure copper for superior thermal conductivity compared to aluminum. It is designed specifically for the Raspberry Pi 4B. The heatsinks attach via thermal conductive adhesive tape, ensuring a quiet operation with no moving parts. The package includes copper heatsinks and the necessary mounting tape for easy installation.
Pros
- Made from 100% pure copper material
- Designed specifically for Raspberry Pi 4B
- Includes thermal conductive adhesive tape
- Operates silently without fans
Cons
- Limited to Raspberry Pi 4B compatibility
- Adhesive mounting may not suit all cases
- Does not include a fan for active cooling
Good fit if
- You own a Raspberry Pi 4B
- You prefer passive cooling solutions
- You want high thermal conductivity
Skip if
- You use a Raspberry Pi 4B with a case that blocks heatsink placement
- You need compatibility with Raspberry Pi 5
- You require active fan cooling
Verdict: Haojiaho Pure Copper Heatsink for Raspberry Pi 4B is a solid passive cooling option for users who prioritize copper's thermal efficiency and silent operation on the Pi 4B.
Specifications side by side
| Spec | Pastall 30 PCS Raspberry Pi Heatsink Kit | Easycargo 20-Piece Copper and Aluminum Heatsink Kit | Geekworm 12mm Aluminum CM4 Heatsink | GeeekPi 102-Piece Aluminum and Copper Heatsink Kit | GeeekPi 8PCS Copper Heatsinks | GeeekPi 18-Piece Pure Copper Heatsink Set | Haojiaho Raspberry Pi 4B Pure Copper Heatsink |
|---|---|---|---|---|---|---|---|
| Material | Aluminum, Copper | Aluminum + Copper | Aluminum alloy | Aluminum, Copper | Pure Copper | Pure Copper | Pure copper |
| Cooling Method | not stated | not stated | Passive Cooling | not stated | not stated | not stated | not stated |
| Compatible Device | Raspberry Pi, Beaglebone | Raspberry Pi 5 4 3 boards | Raspberry Pi Compute Module 4 CM4 | Raspberry Pi, CPU, GPU, Laptop | Raspberry Pi 5 | Raspberry Pi 5/4B | Raspberry Pi 4B |
| Dimensions | not stated | not stated | 54 x 39 x 12 mm | not stated | not stated | not stated | not stated |
| Mounting Type | Thermal Conductive Adhesive Tape | Pre-applied adhesive tape backing | not stated | Thermal conductive adhesive tape | Thermal Conductive Adhesive Tape | Thermal Conductive Adhesive Tape | Adhesive tape |
| Features | Thermal Tape | Thermal Tape | Fan | Thermal Tape | not stated | Thermal Tape | Thermal Tape |
| Weight | 1.27 ounces | 0.64 ounces | 0.71 ounces | 7.83 ounces | 1.41 ounces | 2.47 ounces | 0.71 ounces |
| Model | PT2019080501 | not stated | C235 | not stated | not stated | F-0029 | CMP |
| Color | not stated | Multicolored (20pcs) | not stated | not stated | not stated | not stated | Copper |
Frequently asked questions
Which heatsink kit is best for Raspberry Pi Compute Module 4?
The Geekworm 12mm Aluminum CM4 Heatsink is the top choice for Compute Module 4 owners. It is designed to fit the module perfectly and supports a 30 mm fan for active cooling. This setup ensures better thermal performance than passive options alone. The aluminum construction weighs 0.71 ounces and measures 2.13 inches in length.
What is the best budget alternative to the Pastall kit?
The Easycargo 20-Piece Copper and Aluminum Heatsink Kit is the best budget option. It provides a ready-to-use cooling set with mixed metals and includes thermal tape for simple installation. This kit is ideal for users who want a straightforward solution without extra tools. It weighs 0.64 ounces and features multicolored heatsinks.
Are pure copper heatsinks better for Raspberry Pi 5?
Pure copper heatsinks offer excellent passive cooling for the Raspberry Pi 5. The GeeekPi 8PCS Copper Heatsinks are lightweight and prioritize material quality over quantity. They fit builders who want to manage heat with simple copper blocks rather than complex fan systems. This option weighs just 1.41 ounces for easy handling.
Which kit has the most variety for multiple Pi models?
The GeeekPi 102-Piece Aluminum and Copper Heatsink Kit offers the most variety. It includes a massive selection of aluminum and copper options for cooling multiple Raspberry Pi components like VRM and VRAM. This kit is ideal for users needing extensive coverage. It weighs 7.83 ounces and includes thermal tape for secure attachment.
What is the best silent cooling solution for Pi 4B?
The Haojiaho Raspberry Pi 4B Pure Copper Heatsink is ideal for silent operation. It uses pure copper for high thermal efficiency without requiring active airflow. This passive option weighs 0.71 ounces and includes thermal tape for installation. It is a solid choice for users who prioritize quiet performance on their Pi 4B boards.
Does the Easycargo kit include thermal tape?
Yes, the Easycargo 20-Piece Kit includes thermal tape for installation. This feature allows for a simple, adhesive-based solution for Raspberry Pi boards without needing extra tools. The kit mixes copper and aluminum materials to provide effective cooling. It is a practical choice for users seeking a straightforward setup for their devices.