Noctua vs Jonsbo CPU Coolers: Which Brand Fits You?
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When you search for noctua vs jonsbo CPU cooler options, you find two distinct approaches to small-form-factor cooling. The Noctua NA-FD1 is not a cooler itself, but a fan duct kit designed to improve airflow for low-profile coolers. The Jonsbo CR1400 is a complete air cooler tower. Both target compact builds, but one enhances existing hardware while the other provides the entire cooling solution. You need to decide if you already own a compatible cooler or need a full unit.
Key differences
| Aspect | Noctua SFF Foam CPU Cooler Fan Duct Kit | Jonsbo Compact White RGB CPU Cooler |
|---|---|---|
| Product Type | Fan Duct Kit | Complete Air Cooler |
| Heat Pipes | Not listed | 4 |
| Fan Size | Not listed | 92mm |
| Lighting | Not listed | RGB |
| Socket Compatibility | Compatible with NH-L9i/a series | LGA 1700/1200/115X, AM4/AM3/AM2/FM2 |
Which one should you choose?
Choose Noctua SFF Foam CPU Cooler Fan Duct Kit if
- You already own a Noctua NH-L9i or NH-L9a low-profile cooler and need better airflow in a tight case.
- You want a simple foam spacer system to seal gaps between your fan and case panel.
- You prefer a non-RGB, functional accessory that integrates with existing Noctua fans.
Choose Jonsbo Compact White RGB CPU Cooler if
- You need a complete CPU cooler solution without buying a separate fan or duct kit.
- You want RGB lighting effects visible on your system.
- You require direct contact heat pipe technology for efficient heat transfer from the CPU base.
Verdict: Choose the Noctua kit if you already have a compatible low-profile cooler and need to optimize airflow in a small case. Choose the Jonsbo unit if you need a complete, all-in-one cooling solution with RGB lighting and direct contact heat pipes. The Noctua product enhances performance, while the Jonsbo product provides the cooling hardware itself.
Noctua Duct vs Jonsbo Cooler
system type
These two products serve very different roles in your build. The Noctua NA-FD1 is a fan duct kit, not a cooling unit. It bridges the gap between a fan and perforated case panels to improve airflow. It is designed specifically for small form factor cases like the Dan A4-SFX. The Jonsbo CR1400 is a complete air cooler. It includes heat pipes, a fan, and fins to cool the CPU directly. You cannot compare them as direct substitutes. One enhances airflow for existing coolers, while the other provides the cooling itself.
socket compatibility
The Jonsbo CR1400 lists extensive socket support. It works with Intel LGA 1700, 1200, 1156, 1155, 1151, and 1150. For AMD, it supports AM4, AM3+, AM3, AM2+, AM2, FM2+, and FM2. The Noctua NA-FD1 does not list broad socket compatibility. It is compatible with specific Noctua low-profile coolers like the NH-L9i and NH-L9a series. Those coolers support various sockets, but the duct kit itself is defined by the cooler it fits, not the CPU socket. Jonsbo offers more explicit socket data.
heat pipes
The Jonsbo CR1400 features four 6mm pure copper heat pipes. It uses vacuum heat pipes with exclusive direct contact technology. This design aims for fast heat transfer from the CPU base. The Noctua NA-FD1 has no heat pipes. It is an accessory made from EVA foam spacers. It does not conduct heat from the processor. It only helps direct air. If you need heat transfer components, only the Jonsbo product provides them. The Noctua item lacks this feature entirely as it is not a heat sink.
lighting
The Jonsbo CR1400 includes RGB lighting. It comes with a 126mm RGB PWM fan. This allows you to match the aesthetic of your case. The Noctua NA-FD1 is black and has no lighting. It is a functional foam kit. There are no LEDs or light effects on the duct. If visual customization is important to your build, the Jonsbo cooler offers that capability. The Noctua accessory is purely utilitarian and focuses on airflow performance rather than appearance.
fan size
The Jonsbo CR1400 uses a 92mm fan. It runs up to 2300 RPM. This fan is removable for cleaning. The Noctua NA-FD1 does not include a fan. It is designed to work with fans already attached to compatible Noctua low-profile coolers. The duct kit itself has no fan size specification. It is an adapter. You must already have a fan or plan to use one with your low-profile cooler. The Jonsbo product includes its fan, while the Noctua product requires one.
build material
The Jonsbo CR1400 is built with aluminum fins and copper heat pipes. It uses high-level metal fasteners and an aluminum top nameplate. The construction is designed for thermal conductivity. The Noctua NA-FD1 is made from EVA foam. It is a modular system with spacers adjustable from 5 to 45mm. The materials are chosen for sealing airflow gaps, not for heat dissipation. The Jonsbo cooler is a rigid metal assembly. The Noctua kit is a flexible foam accessory. They are built for completely different purposes.
Choose the right CPU cooler for you
SFF builders with low-profile coolers
You are using a low-profile cooler like the NH-L9i in a compact case. This Noctua duct kit bridges the gap between the fan and case panels. It draws fresh air from outside to improve performance by up to 5°C. The foam spacers adjust from 5 to 45mm to fit various SFF chassis designs perfectly.
Users needing a complete air cooler
You need a complete cooling solution for Intel or AMD sockets. The Jonsbo CR1400 features four 6mm copper heat pipes with direct contact technology for fast heat transfer. It includes a 92mm PWM fan running at 2300 RPM. The white design fits modern builds, and the removable fan allows for easy cleaning and maintenance.
Owners of Dan A4-SFX cases
Your case, such as the Dan A4-SFX, requires optimized airflow for small coolers. This kit is specifically designed for popular SFF cases. It ensures your NH-L9a or NH-L9i cooler draws sufficient air through perforated panels. The modular EVA foam system provides a secure fit without obstructing other components in tight spaces.
The products compared
Noctua SFF Foam CPU Cooler Fan Duct Kit
Best for: SFF cases using Noctua low-profile coolers
- Features
- Fan
- Dimensions
- 4.72 × 3.9 × 1.89 inches
- Weight
- 1.9 ounces
View on Amazon: Noctua SFF Foam CPU Cooler Fan Duct Kit Affiliate link
The Noctua NA-FD1 is a fan duct kit designed to bridge the gap between your CPU cooler and perforated case panels. It uses EVA foam spacers adjustable from 5 to 45mm to direct fresh air into the cooler. This setup can improve cooling performance by up to 5°C. It fits popular small form factor cases like the Dan A4-SFX and Loque Ghost S1. It is built for users who want better airflow in tight builds.
Pros
- Adjustable EVA foam spacers range from 5 to 45mm
- Improves cooling performance by up to 5°C
- Compatible with NH-L9a and NH-L9i series coolers
- Trusted Noctua quality with a 6-year warranty
Cons
- Only works with specific Noctua low-profile coolers
- Does not include the CPU cooler itself
- Requires manual adjustment of spacers for each build
Good fit if
- You build in small form factor cases like the Dan A4-SFX
- You use Noctua NH-L9a or NH-L9i coolers
- You need to close the gap between the fan and case panel
Skip if
- You use a standard ATX case with direct airflow
- You do not have a Noctua low-profile cooler
- You want a complete cooler solution rather than an accessory
Verdict: Noctua NA-FD1 Fan Duct Kit for SFF is a practical add-on for small form factor builders using Noctua low-profile coolers. It helps you get better temperatures by directing air efficiently. It is not a standalone cooler, but a necessary tool for specific tight cases.
Jonsbo Compact White RGB CPU Cooler
Best for: compact SFF builds needing RGB aesthetics
- Socket Compatibility
- LGA 1700/1200/115X, AM4/AM3/AM2/FM2
- Heat Pipes
- 4
- Fan Size
- 92mm
- Fan Speed
- 2300 RPM
- Lighting
- RGB
- Color
- White
View on Amazon: Jonsbo Compact White RGB CPU Cooler Affiliate link
The Jonsbo CR1400 White is a compact air cooler designed for small form factor builds. It features four pure copper heat pipes and a 92mm RGB PWM fan that spins up to 2300 RPM. The direct contact base improves thermal conductivity. Its narrow 3.07-inch width allows it to fit into tight spaces without blocking RAM. This cooler supports major Intel and AMD sockets.
Pros
- Four 6mm pure copper heat pipes for direct heat transfer
- Compact 3.07-inch width ideal for SFF cases
- Removable 92mm RGB fan simplifies cleaning and maintenance
- Direct contact copper base for optimal CPU contact
Cons
- 92mm fan size limits maximum airflow compared to 120mm or 140mm options
- Narrow 3.07-inch width may restrict compatibility with tall RAM modules
- Single fan configuration offers less cooling headroom than dual-fan designs
Good fit if
- You are building a small form factor PC with limited cooler height
- You need a low-profile cooler that fits around tall RAM sticks
- You want RGB lighting in a compact air cooling solution
Skip if
- You require maximum thermal performance for high-end overclocking
- You prefer larger 120mm or 140mm fans for quieter operation
- You need a cooler with dual fan support for extra cooling power
Verdict: Jonsbo CR1400 White 92mm RGB Air Cooler fits users who prioritize case compatibility and RGB aesthetics over raw cooling capacity. It is a practical solution for compact builds where space is the primary constraint.
Specifications side by side
| Spec | Noctua SFF Foam CPU Cooler Fan Duct Kit | Jonsbo Compact White RGB CPU Cooler |
|---|---|---|
| Socket Compatibility | not stated | LGA 1700/1200/115X, AM4/AM3/AM2/FM2 |
| Heat Pipes | not stated | 4 |
| Fan Size | not stated | 92mm |
| Fan Speed | not stated | 2300 RPM |
| Lighting | not stated | RGB |
| Color | Black | White |
| Features | Fan | Fan |
| Dimensions | 4.72 × 3.9 × 1.89 inches | 3.66 × 3.07 × 4.96 inches |
| Weight | 1.9 ounces | not stated |
| Size | One Size | CR1400 White |
| Model | NA-FD1 | CR1400 |
Frequently asked questions
Is the Noctua NA-FD1 a standalone CPU cooler?
No, the Noctua NA-FD1 is not a standalone CPU cooler. It is a fan duct kit designed to improve airflow for low-profile coolers. You use it to direct air efficiently in small form factor cases. It works with Noctua low-profile units to help you get better temperatures. It is a necessary tool for specific tight cases rather than a cooling unit itself.
Does the Jonsbo CR1400 support LGA 1700 sockets?
Yes, the Jonsbo CR1400 supports LGA 1700 sockets. This compatibility allows it to fit modern Intel platforms. The cooler includes four heat pipes to transfer heat away from the CPU. It is a complete air cooler designed for compact builds where space is the primary constraint. You can install it directly if your motherboard uses this socket type.
What is the height of the Jonsbo CR1400 cooler?
The Jonsbo CR1400 has a height of 4.96 inches. This dimension is important for checking clearance in your computer case. The cooler also measures 3.07 inches in width and 3.66 inches in length. These compact dimensions make it suitable for small form factor builds. You should verify that your case can accommodate this height before purchasing.
Does the Jonsbo CR1400 include RGB lighting?
Yes, the Jonsbo CR1400 includes RGB lighting. This feature allows you to customize the look of your build. The cooler is available in a white color scheme to match specific aesthetic preferences. It is designed for users who prioritize case compatibility and RGB aesthetics over raw cooling capacity. You can control the lighting through your motherboard or software if supported.
What are the dimensions of the Noctua NA-FD1 duct kit?
The Noctua NA-FD1 measures 3.9 inches in width, 1.89 inches in height, and 4.72 inches in length. It weighs 1.9 ounces and comes in a black color. These small dimensions allow it to fit into tight spaces within small form factor cases. It is designed to bridge the gap between a fan and perforated case panels to improve airflow.
Can I use the Noctua NA-FD1 with any fan?
The Noctua NA-FD1 is designed to work with Noctua low-profile coolers. It acts as a fan duct kit to improve airflow efficiency. It is not a standalone cooler but a practical add-on for specific tight cases. You should ensure your existing cooler is compatible with this duct kit. It helps direct air efficiently to lower temperatures in small form factor builds.