Newzoll Copper Heatsinks 40Pcs 4 Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This newzoll copper heatsinks 40pcs 4 review covers a thermal kit designed for passive heat dissipation. The product consists of pure copper pads in four specific dimensions. You get ten pieces of each size: 15x15x0.5mm, 15x15x1mm, 20x20x0.5mm, and 20x20x1mm. These pads offer high thermal and electrical conductivity. They feature a smooth surface with no burrs on the edges. The kit weighs three ounces. It is intended for gap filling between graphics cards and thermal modules. This helps improve heat conduction in various electronic components.
What stands out
- Pure copper material for high thermal conductivity
- Four distinct sizes included in the 40-piece kit
- Smooth surface with no edge burrs
- Designed for passive cooling applications
Who it fits
Good fit for
This kit suits DIY enthusiasts working on Arduino projects. It is ideal for users needing to fill gaps between chips and heatsinks. Notebook, CPU, GPU, RAM, VGA, and IC chip repairs benefit from these pads. If you need to improve heat conduction in passive cooling setups, this is a practical choice. The variety of sizes allows for precise fitting. It is also useful for reducing graphics card repair rates by ensuring better thermal contact between modules.
Who should skip it
You should look elsewhere if you need active cooling solutions. This product relies solely on passive heat dissipation. It does not include fans or liquid cooling components. If you require a complete CPU air cooler for a desktop PC, this kit is not sufficient. It is also not suitable for high-power components that need forced air movement. The pads are for gap filling and thermal bridging, not for replacing a full cooling tower or block.
Verdict: This is a solid kit for filling thermal gaps in passive setups. It works well for DIY electronics and component repair.
Key specs explained for Newzoll
Material: Pure copper
Pure copper offers high thermal and electrical conductivity. This means heat moves quickly from hot components like GPUs or CPUs into the pad. You benefit from efficient passive cooling without needing fans. When comparing air coolers, note that this kit lacks a fan but excels at direct contact heat transfer for small chips or gap filling.
Cooling Method: Passive
Passive cooling relies on natural air movement rather than forced airflow from fans. This results in zero noise and no moving parts to fail. You get silent operation for notebooks or quiet PCs. Air coolers use fans to push air, but this kit works by absorbing and spreading heat directly, ideal for low-heat components or supplementary thermal paths.
Compatible Device: Notebook, CPU, GPU, RAM, VGA, IC chip
These pads fit a wide range of small electronics. You can use them to bridge gaps between chips and heatsinks on motherboards or graphics cards. This versatility helps when standard thermal paste cannot fill uneven spaces. Unlike large air coolers for desktop CPUs, these pads target specific hotspots on compact devices or internal components that need direct surface contact.
Sizes: 15x15x0.5mm, 15x15x1mm, 20x20x0.5mm, 20x20x1mm
Four distinct sizes allow you to match specific component footprints and gap heights. The 0.5mm and 1mm thicknesses let you adjust for surface irregularities. You benefit from precise fitting, which improves thermal contact. When shopping for thermal paste, consider that paste fills microscopic gaps, while these pads handle larger physical spaces between components and cooling structures.
Design and Build Quality
According to the listing, these pads are made from pure copper. This material choice ensures high thermal and electrical conductivity. You get a smooth surface with no burrs on the edges. This finish matters for consistent contact with components like GPUs, CPUs, and RAM. The kit includes forty pieces total. You receive ten pads of each of the four sizes. The dimensions are 15x15x0.5mm, 15x15x1mm, 20x20x0.5mm, and 20x20x1mm. This variety allows you to fill different gaps precisely. The thickness options let you adjust the distance between the heat source and the dissipation surface. This flexibility is useful for notebook computers and IC chips where space is tight.
The product is designed for passive cooling. There are no fans or moving parts involved. You rely entirely on the copper to draw heat away from hot spots. The weight is listed as three ounces for the entire pack. This light weight makes it easy to handle during DIY Arduino projects or computer repairs. You can place these pads between graphics cards and thermal modules. The goal is to improve heat conduction and reduce repair rates. The layout is simple. You select the size that fits your gap. You press the pad into place. The copper then handles the rest. This design suits users who need a simple, effective gap filler for various electronic components without complex installation steps.
Setup and Everyday Use Guide
Setting up these Newzoll copper heatsinks involves selecting the correct pad size for your specific component. You have four dimensions to choose from, with ten pieces of each. The available sizes are 15x15x0.5mm, 15x15x1mm, 20x20x0.5mm, and 20x20x1mm. This variety allows you to fill different gaps between heat sources and cooling surfaces. The smooth surface and lack of burrs on the edges ensure consistent contact. This is critical for effective heat transfer. You place the pad directly between the hot component, such as a GPU or CPU, and the passive cooler or chassis. The pure copper material conducts heat away efficiently. For daily use, these pads serve as gap fillers. They improve thermal conduction in notebooks, graphics cards, and RAM modules. The listing recommends them for reducing repair rates by managing heat better. You can also use them for DIY Arduino projects or IC chips. The cooling method is passive, meaning no fans or moving parts are involved. This makes the setup silent and maintenance-free. You simply adhere the pad to the component or cooler. The weight is three ounces for the entire kit, making it lightweight and easy to handle. You do not need any special tools for installation. The electrical conductivity of copper also means you must ensure proper insulation if the pad touches other circuitry. This product suits builders who need precise gap filling for passive cooling solutions.
Before You Buy Newzoll Pads
These pads are passive thermal solutions, so you must pair them with active cooling for serious heat loads. They fit best as gap fillers between components and larger heatsinks. You need to verify the exact dimensions of your graphics card or VRM modules before purchasing. The four sizes cover common footprints, but mismatched thicknesses will reduce effectiveness. Since they lack adhesive, you will require thermal tape or clips to secure them in place. This kit complements standard CPU air coolers by managing heat from nearby VRMs or RAM. It does not replace a primary cooler. Keep the copper surfaces clean to maintain conductivity. Dust accumulation can insulate the pads, so occasional gentle wiping is necessary. This product suits DIY enthusiasts building custom loops or repairing laptops where space is tight. It is not a standalone solution for high-TDP processors.
Check before you buy
- Verify component dimensions against the four available sizes.
- Ensure you have thermal tape or mounting clips.
- Confirm passive cooling is sufficient for your load.
- Check if the pad fits between heatsink and chip.
The product at a glance
Newzoll 40-Piece Copper Heatsink Pads
Best for: filling thermal gaps on GPUs and ICs
- Material
- Pure copper
- Cooling Method
- Passive
- Compatible Device
- Notebook, CPU, GPU, RAM, VGA, IC chip
- Weight
- 3 ounces
View on Amazon: Newzoll 40-Piece Copper Heatsink Pads Affiliate link
This kit includes 40 pure copper heatsinks in four sizes for passive cooling. You get ten pads each of 15x15x0.5mm, 15x15x1mm, 20x20x0.5mm, and 20x20x1mm. The smooth surface and high thermal conductivity help fill gaps between components like GPUs and CPUs. It is ideal for notebook repairs and DIY Arduino projects where you need reliable heat dissipation without active fans.
Pros
- Contains 40 pieces total for ample supply
- Four distinct sizes for various gap heights
- Pure copper material for high conductivity
- Smooth edges with no burrs
Cons
- Passive cooling only, no fan support
- Not suitable for high-TDP desktop CPUs
- Requires manual installation and cutting
Good fit if
- You are repairing graphics card VRMs
- You need to fill thermal gaps on IC chips
- You are building low-power Arduino projects
Skip if
- You need active cooling for a gaming PC
- You want a single large heatsink for a CPU
- You require pre-cut custom shapes
Verdict: Newzoll 40-Piece Pure Copper Heatsink Kit is a practical solution for filling thermal gaps on GPUs and ICs. It fits users who need passive dissipation for low-power components or repairs.
Specifications side by side
| Spec | Newzoll 40-Piece Copper Heatsink Pads |
|---|---|
| Material | Pure copper |
| Cooling Method | Passive |
| Compatible Device | Notebook, CPU, GPU, RAM, VGA, IC chip |
| Weight | 3 ounces |
| Model | 21FR00039 |
Frequently asked questions
What sizes are included in the Newzoll 40-piece kit?
The kit contains four distinct dimensions with ten pieces of each size. You receive ten 15x15x0.5mm pads, ten 15x15x1mm pads, ten 20x20x0.5mm pads, and ten 20x20x1mm pads. This variety allows you to fill different thermal gaps on various components without needing multiple purchases.
Is the Newzoll heatsink pad made of pure copper?
Yes, the Newzoll 40-Piece Pure Copper Heatsink Kit is made from pure copper. This material provides high thermal conductivity, allowing heat to move quickly from hot components into the pad. It also offers high electrical conductivity, which is important for safe contact with electronic parts.
How much do the Newzoll copper heatsinks weigh?
The entire kit weighs 3 ounces. This light weight makes the pads easy to handle during installation. It also ensures they do not add significant mass to delicate components like GPUs or ICs where space and weight are critical factors for proper fitment.
What is the model number for these Newzoll pads?
The model number for this kit is 21FR00039. You can use this identifier to verify the exact product listing when purchasing. It helps ensure you are getting the specific 40-piece set with the four distinct copper pad dimensions described in the specifications.
Are these pads suitable for filling gaps on GPUs?
Yes, these pads are designed for filling thermal gaps on GPUs and ICs. They serve as a practical solution for passive dissipation on low-power components. You can place them between the component and a larger heatsink to improve thermal contact and heat transfer efficiency.
Do these Newzoll heatsinks require active cooling?
These pads are passive thermal solutions, so they do not generate cooling themselves. You must pair them with active cooling methods, such as fans or larger heatsinks, to manage serious heat loads effectively. They work best as gap fillers to enhance the performance of existing cooling setups.