NEW Games Order PS3 Copper Heatsink Shims Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This new games order sony playstation 3 ps3 review focuses on a practical repair kit for console cooling issues. The product includes two copper shims and a tube of Arctic Silver 5 thermal paste. These shims measure 42mm by 42mm and are 1.2mm thick. They are made from 100% copper that is cut and polished. The kit is designed to fit between the CPU or GPU and the heatsink. This setup helps improve heat transfer for compatible Sony consoles. You get a simple, spec-driven solution for overheating concerns without complex tools.
What stands out
- Made from 100% copper for efficient heat conduction
- Includes Arctic Silver 5 thermal paste for better contact
- Shims are precisely 1.2mm thick for consistent fit
- Dimensions are 42mm x 42mm for broad coverage
Who it fits
Good fit for
You should consider this kit if you own a Sony PlayStation 3 Fat or Slim model. It is ideal for users dealing with overheating or the Yellow Light of Death. The specific 1.2mm thickness helps maintain proper clearance between the chip and heatsink. If you want to improve thermal performance using pure copper and quality paste, this spec-focused package suits your needs.
Who should skip it
You should skip this if you need a complete replacement heatsink. This kit only provides shims and paste, not the fan or aluminum block. It is also not suitable for Xbox or PC builds. The shims are fixed at 1.2mm, so you cannot adjust the height. If your console requires different spacing or a full hardware swap, this limited spec set will not work for your repair.
Verdict: This kit offers a straightforward, spec-based fix for PS3 cooling issues using pure copper shims. It is a practical choice for specific console repairs but lacks versatility for other hardware.
Key specs explained
Material: 100% copper
Copper conducts heat faster than aluminum. This material choice helps move thermal energy away from the GPU and CPU quickly. You get better heat dissipation compared to cheaper alloy shims. This matters for reducing temperatures in confined spaces. It ensures the console stays cool during heavy loads.
Size: 42MM X 42MM
The shim covers the full surface area of the processor die. This ensures even heat transfer across the entire chip. Smaller shims might leave hot spots. This size matches the standard footprint for PS3 chips. It provides a stable base for the heatsink to press against uniformly.
Thickness: 1.2MM
This specific thickness fills the gap between the chip and the heatsink. It compensates for uneven surfaces or worn thermal paste. Thicker shims might reduce contact pressure. Thinner ones may not fill voids. This 1.2mm dimension is critical for proper thermal contact and stability.
Compatible Device: Sony Playstation 3
This product is designed specifically for PS3 consoles. It fits the mounting holes and chip layout of both Fat and Slim models. Using it on other devices may cause fitment issues. Ensure your console matches this compatibility before purchasing. It is not a universal shim for all electronics.
Design and Build Details
The listing specifies that the shims are made from 100% copper. This material is cut and polished for a smooth finish. Copper offers higher thermal conductivity than aluminum. This design choice helps transfer heat away from the processor faster. You get a bronze-colored surface that sits between the chip and the cooler. The shim dimensions are 42mm by 42mm. The thickness is exactly 1.2mm. This size fits the standard mounting points on the Sony Playstation 3. The specific thickness raises the heatsink slightly. This adjustment can help seal the gap for better contact. It also aids in repairing yellow light of death issues by ensuring proper seating.
The packaging includes two shims and a tube of Arctic Silver 5 thermal paste. The listing notes the overall package weight is one pound. The external box measures 4.1 inches in width. The height is 1.4 inches. The length is 6.7 inches. This compact layout makes storage easy. You can keep the kit in a drawer without taking up much space. The design is simple and functional. There are no moving parts or complex controls. You simply place the shim on the GPU or CPU. The copper surface then meets the heatsink base. This build quality suits users who need a reliable repair solution. The 100% copper construction ensures durability during installation. You do not need special tools to handle the small components. The included paste complements the metal shims for optimal performance.
Setup And Everyday Use
Setting up this kit involves replacing the existing thermal interface material on your console. You will use the two copper shims between the CPU or GPU and the heatsink. The shims measure 42mm by 42mm and are 1.2mm thick. This specific thickness is critical for maintaining proper contact pressure. You must ensure the surface is clean before application. The included Arctic Silver 5 thermal paste aids in this process. It fills microscopic gaps between the chip and the shim. This combination helps improve heat transfer efficiency. The product is compatible with Sony Playstation 3 models, including both Fat and Slim versions. You should verify your console type before installation. The shims are made from 100% copper. This material is cut and polished for a smooth finish. A smooth surface ensures better contact with the processor. Copper conducts heat faster than aluminum. This property helps move thermal energy away from the components quickly. In everyday use, the shims remain in place as part of the cooling assembly. They do not require adjustment after installation. The goal is to reduce operating temperatures. Lower temperatures can help prevent hardware failures. The kit includes everything needed for the repair. You get two shims and a 3.5g tube of paste. This size is sufficient for a single console repair. The packaging dimensions are 4.1 inches wide, 1.4 inches high, and 6.7 inches long. The total weight is one pound. This makes the kit easy to store until you need it. The bronze color of the copper is visible once installed. This visual cue confirms the material choice. The setup is straightforward if you follow standard disassembly procedures. You handle the components carefully to avoid damage. The shims are durable and do not degrade over time. They provide a stable thermal interface for daily gaming sessions.
Before You Buy These Shims
You need to verify your console model first. This kit fits PS3 Fat and Slim units. Check if your specific revision matches the shim dimensions. You must also have the proper tools for disassembly. A Phillips screwdriver set is essential. You should clean old thermal paste thoroughly. Use isopropyl alcohol for best results. The included Arctic Silver 5 paste is small. You might need more if you make a mistake. This product sits alongside standard CPU air coolers. It serves a different purpose. It targets console overheating, not desktop processor temperatures. You should compare it with generic thermal pads. Copper offers better conductivity than aluminum pads. However, installation requires more care. You must ensure the shims sit flat. Any air gap reduces effectiveness. Keep the area clean during setup. Dust can interfere with heat transfer. This kit is a repair solution. It is not a permanent upgrade. You should monitor temperatures after installation. If issues persist, the heatsink may need replacement. This guide helps you decide if this repair fits your needs.
Check before you buy
- Confirm your PS3 model is Fat or Slim
- Check shim size matches your GPU and CPU
- Ensure you have proper screwdrivers for disassembly
- Verify Arctic Silver 5 paste quantity is sufficient
The product at a glance
NEW Games Order PS3 Copper Heatsink Shims
Best for: PS3 CPU/GPU thermal repair
- Material
- 100% copper
- Compatible Device
- Sony Playstation 3 PS3 Fat Slim
- Dimensions
- 6.7 × 4.1 × 1.4 inches
- Weight
- 1 pounds
View on Amazon: NEW Games Order PS3 Copper Heatsink Shims Affiliate link
This kit includes two 42mm by 42mm copper shims and a tube of Arctic Silver 5 thermal paste. The shims are 1.2mm thick and designed for Sony PlayStation 3 Fat and Slim models. You place them between the CPU or GPU and the heatsink to improve heat transfer. The copper is 100% pure and polished. This setup helps manage thermal output for older console hardware.
Pros
- Contains 2 copper shims and Arctic Silver 5 paste
- 100% pure copper material for high thermal conductivity
- Shims measure 42mm x 42mm x 1.2mm
- Compatible with PS3 Fat and Slim models
Cons
- Shim thickness is fixed at 1.2mm
- Includes only one tube of thermal paste
- Requires manual installation between components
Good fit if
- You need to replace degraded thermal pads on a PS3
- You want to improve cooling for the CPU or GPU
- You are repairing a PS3 Fat or Slim model
Skip if
- You own a PlayStation 4 or newer console
- You need a complete heatsink assembly replacement
- You prefer pre-applied thermal pads for easier installation
Verdict: NEW Games Order PS3 Copper Shim provides a direct copper interface for PS3 cooling repairs. It suits users who want to manually improve heat dissipation on older consoles.
Specifications side by side
| Spec | NEW Games Order PS3 Copper Heatsink Shims |
|---|---|
| Material | 100% copper |
| Compatible Device | Sony Playstation 3 PS3 Fat Slim |
| Dimensions | 6.7 × 4.1 × 1.4 inches |
| Weight | 1 pounds |
| Size | Small |
| Color | Bronze |
| Model | 8541600992 |
Frequently asked questions
What are the exact dimensions of the NEW Games Order PS3 copper shims?
The shims measure 4.1 inches in width, 1.4 inches in height, and 6.7 inches in length. They are classified as small size. The listed weight is 1 pounds. These physical specifications help you determine if they fit your specific console layout.
Which gaming devices are compatible with these thermal shims?
This product is designed for the GPU component of PlayStation 3 consoles. The brand lists it as suitable for PS3 CPU and GPU thermal repair. You should verify your specific console model matches these requirements before installation.
What material is used to make these heatsink shims?
The shims are constructed from copper. The listing specifies a bronze color finish. Copper is chosen for its high thermal conductivity, which helps move heat away from the processor faster than aluminum alternatives. This material choice is central to the product's function.
What is the model number for these NEW Games Order shims?
The specific model identifier is 8541600992. You can use this number to verify the exact product listing. It ensures you are purchasing the correct version of the copper shim kit intended for PS3 cooling repairs.
Is this kit suitable for repairing overheating issues on older consoles?
Yes, it is intended for users who want to manually improve heat dissipation on older consoles. The direct copper interface helps with thermal repair tasks. It is designed to aid in managing temperatures on legacy hardware like the PlayStation 3.
How heavy is the package containing these copper shims?
The total weight of the item is 1 pounds. This weight reflects the density of the copper material used. It is a straightforward specification that helps you understand the physical presence of the product in your shipping package.