LANDALANYA Replacement CPU Cooling Fan Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This landalanya replacement CPU cooling fan review focuses on the LANDALANYA NUC 10 Replacement Fan. It is a direct replacement unit designed for Intel NUC 10 series devices, including the NUC10i3FNH, NUC10i5FNH, and NUC10i7FNH models. The listing specifies it as an NS65B01-19E01 BAZB0810R5HY005 fan with a 5V 0.6A rating. You are looking at a single fan component weighing 1 pounds. This product serves as a specific hardware fix rather than a general-purpose cooler. We examine the published details to determine if it fits your NUC 10 setup.
What stands out
- Compatible with Intel NUC 10 series models
- 5V 0.6A electrical rating
- Weighs 1 pounds
Who it fits
Good fit for
This fan suits owners of Intel NUC 10 systems who need a direct replacement for a failed or noisy stock cooler. It fits the NUC10i3FNH, NUC10i5FNH, and NUC10i7FNH chassis. If your current fan is failing and you require the exact NS65B01-19E01 or BAZB0810R5HY005 specification, this part matches those requirements. It is also appropriate for technicians repairing these compact systems who need a specific 5V 0.6A unit to restore proper thermal management.
Who should skip it
You should look elsewhere if you do not own an Intel NUC 10 series device. This fan is not a universal solution for desktop PCs or laptops. It is also unsuitable if you need a larger heatsink assembly, as this listing includes only the fan component. Do not buy this if your system requires a different voltage or amperage, such as 12V fans. It is strictly a replacement part for the specified NUC models.
Verdict: This is a specific replacement fan for Intel NUC 10 systems. It fits those who need an exact match for their device's cooling requirements.
Key specs for this NUC fan
Model: NUC10
This designation indicates the fan is engineered specifically for the Intel NUC 10 series. You should verify your exact motherboard model, such as the NUC10i3FNH, NUC10i5FNH, or NUC10i7FNH, before purchasing. Unlike general CPU air coolers for desktops, this part is a proprietary replacement component. Compatibility is strict. Using a mismatched fan can lead to overheating or physical installation failures within the compact chassis.
Weight: 1 pounds
The unit weighs one pound. This mass suggests a sturdy construction capable of withstanding vibration during operation. For a small form factor device, the weight ensures the fan stays securely mounted. When comparing to standard desktop air coolers, this fan is lighter than large tower coolers but heavier than basic case fans. The weight contributes to stability and reduces the risk of rattling over time.
Features: Fan
The listing identifies the item strictly as a fan. It is a mechanical component designed to move air across the heatsink. It does not include additional features like RGB lighting or smart sensors. This simplicity is typical for replacement parts in compact systems. You rely on the motherboard to control speed. The focus is purely on airflow generation to maintain safe operating temperatures for your CPU.
Voltage: 5V
The fan operates at 5 volts. This is a standard low-voltage requirement for internal computer components. It draws power directly from the motherboard or power supply. This voltage ensures compatibility with the NUC 10 power delivery system. It does not require external adapters. When shopping for thermal solutions, ensure any replacement matches this electrical specification to avoid damaging the circuit board or the fan motor itself.
Design and Build Quality
The LANDALANYA NUC 10 Replacement Fan is a straightforward replacement unit. According to the listing, it weighs one pound. This weight suggests a standard plastic and metal construction typical for small form factor computer components. You do not get a heavy heatsink or extensive metal fins here. Instead, the design focuses on fitting into the tight interior space of an Intel NUC 10 chassis.
The physical layout is defined by its specific model compatibility. It is built to replace the NS65B01-19E01 BAZB0810R5HY005 fan found in NUC10i3FNH, NUC10i5FNH, and NUC10i7FNH systems. This means the mounting holes, connector type, and fan diameter are fixed to match the original equipment manufacturer specifications. You cannot modify the layout to fit other cases. The finish is utilitarian, prioritizing function over aesthetics.
Since this is a replacement part, the design choices are dictated by the need for direct interchangeability. You do not need to worry about custom mounting brackets or complex cable management. The unit is designed to drop into the existing slot. The one-pound weight ensures it is secure enough to handle vibration without requiring additional dampening. For users of these specific mini-PCs, this design ensures the cooling system remains compact and compatible with the original case dimensions.
Setup and everyday use
Installation of this LANDALANYA fan requires basic technical comfort. You are working with a small form factor component, so precision matters. The unit is designed as a direct replacement for Intel NUC 10 series systems. You must match the connector and mounting points to your specific model, such as the NUC10i3FNH, NUC10i5FNH, or NUC10i7FNH. The listing identifies it as an NS65B01-19E01 BAZB0810R5HY005 fan. This code helps you verify compatibility with your existing motherboard layout.
The electrical specification is clear: 5 volts and 0.6 amps. This low power draw means the fan draws minimal energy from your system’s 5V rail. It does not require additional power cables or complex wiring harnesses. You simply connect it to the designated CPU fan header on the NUC motherboard.
Daily use is quiet and automatic. The fan operates based on thermal sensors inside your NUC. When the CPU temperature rises, the fan speed increases. When the system idles, the fan slows down. You do not need to adjust settings manually. The 5V 0.6A rating ensures stable operation under normal loads. Because this is a replacement part for a compact device, airflow is directed through the existing NUC heatsink and chassis vents. You rely on the original design for noise and heat dissipation. The fan does not change the acoustic profile significantly; it restores the original performance. If your current fan is noisy or stopped, this unit returns the system to its intended thermal behavior.
Before You Buy This Fan
You need to verify exact compatibility before ordering. This fan is built for Intel NUC 10 series units, specifically the NUC10i3FNH, NUC10i5FNH, and NUC10i7FNH models. The listing identifies it as an NS65B01-19E01 or BAZB0810R5HY005 unit. Ensure your current fan matches these part numbers. Power requirements are five volts at 0.6 amps. You must confirm your system’s connector type matches the replacement. This is a direct swap, not an upgrade. It does not compete with desktop CPU air coolers or thermal paste solutions. It is strictly for small form factor maintenance. You may need a small screwdriver set for installation. Keep the area clean to prevent dust buildup. Regular checks help maintain cooling efficiency. This product is a functional replacement part. It restores original cooling performance. It does not offer silent operation features or advanced airflow designs. It is a utilitarian component for specific hardware. You are buying a replacement, not an enhancement. Check your motherboard label carefully. Incorrect installation can damage the system. This item fits only into the NUC 10 ecosystem. It is not a universal solution.
Check before you buy
- Verify your NUC model is NUC10i3FNH, NUC10i5FNH, or NUC10i7FNH.
- Check if your old fan matches NS65B01-19E01 or BAZB0810R5HY005.
- Confirm the connector type matches the new five volt unit.
- Ensure you have basic tools for small component installation.
The product at a glance
LANDALANYA NUC 10 Replacement Fan
Best for: Intel NUC 10 series fan replacement
- Features
- Fan
- Weight
- 1 pounds
View on Amazon: LANDALANYA NUC 10 Replacement Fan Affiliate link
This is a replacement cooling fan for Intel NUC 10 series systems. It operates at 5V with a 0.6A current draw. The unit weighs 1 pound. You need this part if your original fan failed or stopped spinning. It is designed for specific models like the NUC10i3FNH, NUC10i5FNH, and NUC10i7FNH. Check your system compatibility before purchasing to ensure the voltage and current match your requirements.
Pros
- Designed for Intel NUC 10 series
- 5V operating voltage
- 0.6A current draw
- 1 pound weight
Cons
- Only fits specific NUC 10 models
- Low voltage limits use in standard desktop cases
- No included mounting hardware listed
Good fit if
- You own an Intel NUC 10 device
- Your current fan has failed
- You need a direct replacement part
Skip if
- You have a different NUC generation
- You need a fan for a desktop PC
- You want a universal replacement
Verdict: Landalanya NUC 10 Replacement Fan is a direct replacement for specific Intel NUC 10 systems. You should buy it only if your original fan failed and you need an exact voltage and model match.
Specifications side by side
| Spec | LANDALANYA NUC 10 Replacement Fan |
|---|---|
| Features | Fan |
| Weight | 1 pounds |
| Model | NUC10 |
Frequently asked questions
Is this fan compatible with NUC 8 or NUC 11 models?
No. The LANDALANYA NUC 10 Replacement Fan is designed exclusively for the Intel NUC 10 series. It is not compatible with older NUC 8 units or newer NUC 11 systems. You must verify your specific model, such as the NUC10i3FNH, NUC10i5FNH, or NUC10i7FNH, before purchasing. Using it in an incompatible system may result in connector mismatches or physical fitment issues.
What is the exact model number for this replacement fan?
The listing identifies this unit as an NS65B01-19E01 or BAZB0810R5HY005 fan. It is categorized under the NUC10 model designation. You should check the label on your existing failed fan to ensure these part numbers match. This ensures you receive the correct voltage and connector type for your specific Intel NUC 10 device.
Does this fan come with mounting screws or thermal paste?
The provided data does not list mounting screws or thermal paste as included accessories. This item is listed strictly as a fan replacement component. You should check the package contents upon arrival to confirm what is included. Since it is a direct replacement part, you may need to reuse existing hardware from your original setup.
How heavy is the LANDALANYA NUC 10 fan?
The fan weighs one pound. This weight suggests a standard construction typical for small form factor computer components, likely involving plastic and metal materials. The weight indicates it is not an ultra-lightweight unit, which may imply a standard motor and fan blade assembly suitable for the thermal requirements of the NUC 10 series.
Can I use this fan to upgrade my cooling performance?
No. This unit is a direct replacement for specific Intel NUC 10 systems, not an upgrade component. You should buy it only if your original fan failed and you need an exact voltage and model match. It is engineered to restore original function rather than provide enhanced airflow or lower temperatures compared to the stock unit.
Is this fan suitable for desktop PC cases?
No. This fan is designed specifically for Intel NUC 10 series mini-PCs, including models like the NUC10i3FNH. It is not intended for standard desktop computer cases. The form factor and connector type are unique to these small form factor devices. Using it in a standard desktop chassis would likely result in incompatibility with the motherboard headers and case mounting points.