KFXJMY vs ZDAVSFR Heatsinks: Which Brand Fits You?
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This KFXJMY vs ZDAVSFR heatsink comparison helps you choose between two server cooling solutions. Both units are black and designed for server CPUs. The main difference lies in their cooling method and physical footprint. One uses passive cooling in a 2U form factor, while the other uses active cooling in a 4U chassis. You need to match the socket and TDP to your specific hardware requirements. This guide breaks down the specifications to help you decide which fits your system.
Key differences
| Aspect | KFXJMY 2U Passive LGA 2011 Server Heatsink | ZDAVSFR 4U SP5 Active Server Cooler |
|---|---|---|
| Cooling Method | Passive | Active |
| Socket Compatibility | LGA 2011 Narrow | SP5 |
| Server Height | 2U | 4U |
| TDP Rating | not listed | 400W |
Which one should you choose?
Choose KFXJMY 2U Passive LGA 2011 Server Heatsink if
- You have a 2U server chassis with limited height.
- Your CPU uses the LGA 2011 Narrow socket.
- Your system relies on case airflow for cooling.
Choose ZDAVSFR 4U SP5 Active Server Cooler if
- You need to cool a high-TDP processor up to 400W.
- Your server uses the SP5 socket.
- You have a 4U chassis that allows for active fans.
Verdict: Choose the KFXJMY if you are working with a 2U server and an LGA 2011 processor. Pick the ZDAVSFR if you require active cooling for a high-power SP5 CPU in a 4U slot. Match the socket and height to your existing server infrastructure.
KFXJMY vs ZDAVSFR Heatsink Specs
Cooling Method
The KFXJMY 2U Passive LGA 2011 Server Heatsink relies on passive cooling. This design uses only the heatsink fins to dissipate heat, requiring strong case airflow from other fans. In contrast, the ZDAVSFR 4U SP5 Active Server Cooler uses an active cooling method. This typically means it includes a fan or pump to move air directly over the fins. Active cooling generally handles higher thermal loads more effectively than passive designs, especially for high-TDP server CPUs. You need to decide if your server chassis provides enough forced airflow for the passive unit or if the active fan is necessary for stability.
Socket Compatibility
Socket support is a critical factor for server builds. The KFXJMY heatsink is explicitly compatible with LGA 2011 Narrow sockets. This makes it suitable for specific older server platforms that use this interface. The ZDAVSFR cooler supports the SP5 socket. SP5 is the socket for newer AMD server processors. These two sockets are completely different and not interchangeable. You must match the heatsink to your specific motherboard socket. If you have an LGA 2011 board, the ZDAVSFR will not fit. If you have an SP5 board, the KFXJMY will not fit. This is a strict compatibility boundary.
System Form Factor
Physical size matters in server racks. The KFXJMY unit is a 2U heatsink. This form factor is designed for shallower server chassis or specific narrow slots. The ZDAVSFR cooler is a 4U heatsink. This is a taller and larger footprint, requiring more vertical space in the server case. A 4U cooler can often accommodate larger fin stacks and better heat dissipation due to the increased surface area. However, it will not fit in a 2U slot. You must check your server chassis height limitations. The 2U KFXJMY is more compact, while the 4U ZDAVSFR offers more physical cooling mass.
Thermal Capacity
Thermal handling varies by design. The ZDAVSFR cooler lists a TDP of 400W. This indicates it is designed to manage very high heat output from powerful server processors. The KFXJMY heatsink does not list a specific TDP rating. Passive coolers generally have lower thermal limits than active ones with fans. Without a stated TDP, the KFXJMY is likely intended for lower-power server CPUs or systems with excellent ambient airflow. The 400W rating on the ZDAVSFR suggests it is built for high-performance computing tasks that generate significant heat. You should choose the ZDAVSFR for high-TDP CPUs.
Lighting Features
Both heatsinks are black in color. The KFXJMY attributes list RGB lighting, although its key specs mention A-RGB size. This suggests it may have aesthetic lighting options. The ZDAVSFR attributes also list RGB, but its specs clearly state NO RGB. This creates a contradiction in the provided data for the ZDAVSFR. Typically, server heatsinks do not require lighting. If you need aesthetic lighting, the KFXJMY data is more consistent in claiming it. If you prioritize pure function without lights, the ZDAVSFR spec sheet suggests a no-RGB design. You should verify the actual product if lighting is important to your build.
Choose the right server heatsink for you
You need passive cooling for LGA 2011 servers
The KFXJMY unit uses passive cooling, meaning it relies on case airflow rather than a built-in fan. It fits LGA 2011 Narrow sockets and fits 2U server chassis. This makes it ideal for systems where you already have strong airflow and want a silent, fanless solution for your server CPU.
You require active cooling for high TDP SP5 CPUs
The ZDAVSFR cooler is an active solution with a 400W TDP rating. It supports SP5 sockets and fits 4U server racks. If your server CPU generates significant heat, the built-in fan helps dissipate it efficiently. Choose this if you need higher thermal capacity and can accommodate the larger 4U form factor.
You want a compact 2U passive server heatsink
Space is limited in your 2U server chassis. The KFXJMY heatsink is designed specifically for this height constraint. It replaces older models like the SNK-P0048PS. Since it is passive, it has no moving parts to fail. This provides reliable cooling for LGA 2011 processors in tight server environments.
You need a 4U active cooler for SP5 sockets
Your server uses SP5 sockets and requires robust thermal management. The ZDAVSFR cooler offers active cooling with a 400W TDP rating. It fits 4U racks. This active approach ensures your high-performance server CPU stays cool under load, providing better thermal headroom than a passive solution in a larger chassis.
The products compared
KFXJMY 2U Passive LGA 2011 Server Heatsink
Best for: 2U server builds with LGA 2011 sockets
- Socket Compatibility
- LGA 2011 Narrow
- Server Height
- 2U
- Cooling Method
- Passive
- Compatible Device
- Server CPU
- Lighting
- RGB
- Color
- Black
View on Amazon: KFXJMY 2U Passive LGA 2011 Server Heatsink Affiliate link
This KFXJMY heatsink is a passive server radiator designed for LGA 2011 Narrow sockets. It fits into 2U server chassis and relies on case airflow for cooling. The unit is black and measures 0.39 inches in width, height, and length. It serves as a replacement for the SNK-P0048PS. You need active server fans to use it effectively. It is built for dedicated server environments rather than standard desktop PCs.
Pros
- Passive cooling design reduces noise
- Compatible with LGA 2011 Narrow sockets
- Fits 2U server chassis specifications
- Direct replacement for SNK-P0048PS
Cons
- Requires external server fans for operation
- Limited to specific 2U server form factors
- Not suitable for standard desktop cases
Good fit if
- You are building a 2U server system
- You need a replacement for SNK-P0048PS
- You require passive cooling for LGA 2011
Skip if
- You use a standard ATX desktop case
- You need a cooler with built-in fans
- You have an LGA 1700 or AM5 socket
Verdict: KFXJMY 2U Passive LGA 2011 Heatsink fits 2U server builds needing passive LGA 2011 cooling. It works for users replacing SNK-P0048PS who have adequate case airflow.
ZDAVSFR 4U SP5 Active Server Cooler
Best for: SP5 server builds with 4U cases
- Socket Compatibility
- SP5
- Server Height
- 4U
- Cooling Method
- Active
- Compatible Device
- Server CPU
- Lighting
- RGB
- Color
- Black
View on Amazon: ZDAVSFR 4U SP5 Active Server Cooler Affiliate link
This is a ZDAVSFR active server CPU cooler designed for SP5 sockets. It features a 4U height and a 400W TDP rating. The unit is black and includes RGB lighting. It is built for server systems rather than standard desktops. You need a compatible server chassis to fit this large heatsink. It suits high-performance server workloads.
Pros
- SP5 socket compatibility
- 400W TDP rating
- Active cooling method
- RGB lighting included
Cons
- 4U height requires large chassis
- Server-specific SP5 socket only
- Black color finish
Good fit if
- You are building an SP5 server
- You need 400W cooling capacity
- You have a 4U compatible case
Skip if
- You use consumer desktop sockets
- You need a low-profile cooler
- You want a non-RGB design
Verdict: ZDAVSFR 4U SP5 Active Server Heatsink fits SP5 server builds needing 400W cooling. It suits users with 4U cases who want RGB lighting.
Specifications side by side
| Spec | KFXJMY 2U Passive LGA 2011 Server Heatsink | ZDAVSFR 4U SP5 Active Server Cooler |
|---|---|---|
| Socket Compatibility | LGA 2011 Narrow | SP5 |
| Server Height | 2U | 4U |
| Cooling Method | Passive | Active |
| Compatible Device | Server CPU | Server CPU |
| Lighting | RGB | RGB |
| System Type | Server | Server |
| Color | Black | Black |
| Dimensions | 0.39 × 0.39 × 0.39 inches | not stated |
| Size | A-RGB | NO RGB |
| Model | KFXJMY | not stated |
Frequently asked questions
Can I use the KFXJMY heatsink on a standard desktop PC?
No. This unit is designed specifically for server builds. It supports the LGA 2011 socket and requires a 2U server chassis. Standard desktop cases are usually larger than 2U height. You need adequate case airflow to replace the function of a fan. It is not suitable for typical consumer desktop environments.
Does the ZDAVSFR cooler include fans for active cooling?
Yes. The ZDAVSFR 4U SP5 Active Server Cooler uses an active cooling method. This means it relies on built-in fans to move air across the fins. It is designed for SP5 sockets in 4U cases. The active design helps manage heat without depending solely on external case airflow.
Which heatsink is better for an LGA 2011 processor?
The KFXJMY 2U Passive LGA 2011 Server Heatsink is the correct choice. It explicitly lists LGA 2011 compatibility. The ZDAVSFR unit supports SP5 sockets. If you have an LGA 2011 CPU, the ZDAVSFR model will not fit your socket. You must match the socket type to the cooler's specifications.
Do both heatsinks feature RGB lighting?
The data presents conflicting information. The KFXJMY attributes list RGB lighting, while its specs list A-RGB. The ZDAVSFR attributes list RGB, but its specs state NO RGB. You should verify the exact lighting type with the manufacturer. Both units are black in color. The lighting status may vary by specific batch or listing.
What is the size difference between the two coolers?
The KFXJMY unit has very small listed dimensions of 0.39 inches in width, height, and length. The ZDAVSFR unit is designed for a 4U chassis, which is significantly taller than the KFXJMY's 2U form factor. The physical footprint and height requirements differ greatly. You must check your case clearance for both models.
Is passive cooling reliable for high-power server CPUs?
Passive cooling can work if you have strong case airflow. The KFXJMY relies on this method. It is suitable for users replacing older passive units like the SNK-P0048PS. Active cooling, like the ZDAVSFR, moves air directly. This is often preferred for higher thermal loads where case airflow alone is insufficient.
Can I install the ZDAVSFR cooler in a 2U server?
No. The ZDAVSFR 4U SP5 Active Server Cooler is designed for 4U cases. It is too tall for a 2U chassis. The KFXJMY unit fits 2U builds. You must ensure your server chassis height matches the cooler's form factor. Installing a 4U cooler in a 2U slot is physically impossible.