Jonsbo 92mm ARGB Mini Tower Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This jonsbo cr1400 evo CPU cooler review focuses on a compact air cooling solution designed for small form factor builds. The unit features a 92mm fan and stands 130mm tall, making it a mini tower that fits in most cases. It uses four nickel-plated copper heat pipes to move heat away from the processor. The design includes ARGB lighting and a crooked neck layout to avoid blocking RAM slots. You get silent operation and modern socket support in a small package.
What stands out
- 4 nickel-plated copper heat pipes with 25% improved load solving efficiency
- 92mm PWM ARGB fan with six sickle-shaped blades and silicone pads
- Compact dimensions of 92 x 70 x 130mm fit most tower cases
- Crooked neck heat pipes clear memory modules for full RGB display
- Supports Intel LGA1851/1700/1200/115X and AMD AM4/AM5 sockets
Who it fits
Good fit for
This cooler suits users building in mini-ITX or micro-ATX cases where space is tight. The 130mm height ensures it fits under many low-profile CPU coolers or standard cases with height limits. If you need ARGB lighting that highlights your RAM, the crooked neck design is a practical choice. It also works well for AMD AM5 and Intel LGA1700 systems, providing broad compatibility for modern platforms without taking up excessive motherboard real estate.
Who should skip it
You should look elsewhere if you need a high-end cooling solution for heavy overclocking. The 92mm fan moves less air than standard 120mm or 140mm fans, limiting peak performance. If your case requires a cooler taller than 130mm, this unit is too short to be effective. Additionally, users who prefer silent operation above all else might find the 92mm fan noise levels higher than larger, slower-spinning alternatives. This is a budget mini-tower, not a high-performance beast.
Verdict: The Jonsbo CR1400 EVO is a practical mini-tower cooler for compact builds. It balances size, lighting, and basic cooling performance well.
Key Specs Explained For Jonsbo
Fan Size: 92mm
A 92mm fan is smaller than the standard 120mm or 140mm fans found in most coolers. This size allows the cooler to fit into tight spaces where larger fans cannot. You get reduced airflow compared to bigger fans, but the smaller footprint is ideal for mini-ITX builds or cases with limited clearance. When shopping, compare this to 120mm models if you have the height and width available for better cooling performance.
Cooler Height: 130mm
The tower stands 130mm tall, which is a moderate height for a mini tower design. This dimension determines whether the cooler fits inside your computer case without hitting the side panel or RAM modules. Most standard ATX cases can accommodate this height, but compact cases may require verification. Check your case specifications against this measurement to ensure proper clearance before purchasing.
Heat Pipes: 4
The unit uses four copper heat pipes to transfer heat from the CPU to the aluminum fins. This count provides a baseline for thermal capacity. More heat pipes generally mean better heat dissipation, but the 92mm fan limits overall airflow. This setup suits low to mid-range CPUs. When comparing, note that high-end air coolers often use six heat pipes paired with larger fans for superior thermal handling.
Socket Compatibility: LGA1851/1700/1200/115X, AM4/AM5
This cooler supports a wide range of modern Intel and AMD sockets. It works with the latest LGA1851 platform and older LGA1700, LGA1200, and LGA115x boards. It also fits AMD AM4 and AM5 sockets. This broad compatibility means you can use it across multiple generations of processors. Verify your specific motherboard socket type to ensure the mounting hardware is included and compatible with your build.
Design And Build Quality
According to the listing, the Jonsbo CR1400 EVO uses four nickel-plated copper heat pipes. This plating helps prevent oxidation over time. The pipes are arranged in a tower design with a crooked neck layout. This shape avoids interference with nearby RAM sticks. You can see the full memory modules without obstruction. The cooler includes an integrated top cover for ARGB lighting. This design choice keeps the visual profile clean while highlighting the memory area.
The physical dimensions are listed as 92mm in width, 70mm in depth, and 130mm in height. These measurements classify it as a mini tower. The compact size allows it to fit into most standard computer cases. The 92mm PWM fan is mounted directly to the heatsink. It features a three-pin connector for power and control. The fan blades are shaped to reduce noise. Eight silicone pads are used to dampen vibrations. This construction aims for a silent operation experience.
The overall finish is black. The materials focus on copper for heat transfer and nickel plating for durability. The design prioritizes compatibility with small form factor builds. You get a cooling solution that balances size constraints with thermal performance. The ARGB feature adds visual appeal without adding significant bulk. This makes it suitable for users who need a low-profile cooler but still want lighting effects.
Setup And Daily Use
Installation begins with ensuring your motherboard socket is supported. The listing confirms compatibility with Intel LGA1851, LGA1700, LGA1200, and LGA115X. It also supports AMD AM4 and AM5 platforms. You must verify that your case can accommodate a cooler with these dimensions: 92mm in length, 70mm in width, and 130mm in height. This mini tower size is designed to fit most standard cases without blocking other components.
The cooler uses four nickel-plated copper heat pipes. These pipes are arranged in a tower design with a crooked neck. This specific shape helps avoid interference with nearby RAM modules. The listing notes that this design allows for a full display of memory, including any lighting effects on your sticks. This is useful if you have low-profile or RGB-equipped memory.
For power and control, the unit includes a 9cm PWM ARGB fan. It connects via a 3-pin header. This fan features six sickle-shaped blades and eight shock-absorbing silicone pads. The listing describes this as a new low-noise design. The ARGB lighting is integrated into an elegant top cover. You will need to connect the ARGB cable to a compatible motherboard header for the lighting effects to work.
In daily use, the cooler operates as a standard air cooling solution. The 92mm fan size provides reduced airflow compared to larger 120mm or 140mm fans. This trade-off allows for a smaller physical footprint. The nickel plating on the heat pipes is intended to prevent oxidation over time, maintaining performance. The setup is straightforward for supported sockets, provided you have the necessary mounting hardware for your specific motherboard.
Before You Buy This Mini Tower
Before you buy this Jonsbo CR1400 EVO, verify your case dimensions carefully. The cooler stands 130mm tall and measures 92mm by 70mm. Ensure your RAM clearance exceeds the 130mm height, as the crooked neck pipes help but do not guarantee infinite clearance. Check that your motherboard supports LGA1700, LGA1200, LGA115X, LGA1851, AM4, or AM5. You will need a motherboard header for the 3-pin ARGB connection, as the fan is PWM controlled but the lighting requires separate control. Keep the fan blades clean to maintain the low-noise design. This mini tower fits alongside larger 120mm or 140mm options in our guide. Choose it if space is tight. Avoid it if you need maximum cooling for high-end chips. The compact size limits airflow potential compared to bigger towers. Plan your cable routing for the ARGB cable early. This ensures a clean build inside small form factor cases.
Check before you buy
- Verify case height clearance exceeds 130mm
- Check RAM height against cooler profile
- Confirm motherboard socket matches LGA1700 or AM5
- Ensure ARGB header availability on motherboard
The product at a glance
Jonsbo 92mm ARGB Mini Tower Cooler
Best for: Small cases with height limits
- Socket Compatibility
- LGA1851/1700/1200/115X, AM4/AM5
- Cooler Height
- 130mm
- Heat Pipes
- 4
- Tower Design
- Tower
- Fan Size
- 92mm
- Lighting
- ARGB
View on Amazon: Jonsbo 92mm ARGB Mini Tower Cooler Affiliate link
The Jonsbo CR1400 EVO is a compact air cooler designed for small form factor builds. It features a 92mm PWM ARGB fan and four nickel-plated copper heat pipes. The unit stands 130mm tall, making it compatible with most tower cases. It supports Intel LGA 1700 and AMD AM5 sockets. This cooler suits users needing low noise and RGB lighting in a small footprint.
Pros
- Four nickel-plated copper heat pipes for efficient heat transfer
- 92mm PWM ARGB fan with low-noise design
- Compact 130mm height fits most tower cases
- Crooked neck heat pipes avoid memory interference
Cons
- 92mm fan size offers lower cooling potential than 120mm models
- Single fan limits airflow compared to dual-fan towers
- ARGB requires 3-pin motherboard connection
Good fit if
- You need a cooler under 130mm tall
- You want ARGB lighting in a mini tower
- You use an AM5 or LGA 1700 socket
Skip if
- You require maximum cooling performance
- You prefer 120mm or 140mm fans
- You need RGB sync via 5-pin headers
Verdict: Jonsbo CR1400 EVO 92mm ARGB Mini Tower fits small cases where height is limited. It provides adequate cooling for standard processors while adding ARGB effects.
Specifications side by side
| Spec | Jonsbo 92mm ARGB Mini Tower Cooler |
|---|---|
| Socket Compatibility | LGA1851/1700/1200/115X, AM4/AM5 |
| Cooler Height | 130mm |
| Heat Pipes | 4 |
| Tower Design | Tower |
| Fan Size | 92mm |
| Lighting | ARGB |
| Color | Black |
| Material | Copper |
| Features | Fan |
| Dimensions | 3.6 × 2.75 × 5.1 inches |
| Model | EVO 1400 ARGB |
Frequently asked questions
Does the Jonsbo 92mm ARGB Mini Tower fit in small cases?
Yes, it is designed for small cases with height limits. The cooler measures 2.75 inches in width, 3.6 inches in length, and 5.1 inches in height. These compact dimensions allow it to fit where larger coolers cannot, making it a practical choice for mini-ITX builds.
What sockets does this cooler support?
It supports AM4, AM5, LGA 1851, and LGA 1700. This wide compatibility covers most modern AMD and Intel platforms. You can use it for both current-generation processors and previous generations that use the listed socket types without needing a different mounting bracket.
Does it have RGB lighting?
Yes, it features ARGB lighting. This allows you to sync the fan colors with other compatible components in your build. The lighting adds visual appeal without requiring separate controllers, as it connects directly to your motherboard for synchronized effects.
What material is the base made of?
The base is made of copper. Copper is chosen for its high thermal conductivity, which helps transfer heat away from the CPU efficiently. This material choice ensures effective cooling performance for standard processors within the cooler's design limits.
Is this cooler suitable for gaming?
It provides adequate cooling for standard processors during typical workloads. While it is not a high-end enthusiast cooler, it handles general tasks and moderate gaming well. The 92mm fan ensures sufficient airflow for everyday use in compact systems.
How wide is the Jonsbo CR1400 EVO?
The cooler is 2.75 inches wide. This narrow profile helps it fit into cases with tight lateral spacing. You should verify that your case has enough width to accommodate this measurement along with the fan thickness.