JEVMQIXRM 4U/6U EPYC SP5 Server Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The JEVMQIXRM 4U server cooler 6U alternatives list helps you find comparable cooling solutions for SP5 sockets. This original model provides direct socket cooling with a 3800 RPM fan, designed specifically for 4U server racks. It suits users who need high airflow for EPYC processors in standard server environments. The unit is built for specific system types and features a dedicated fan for thermal management.
You might want something else if your chassis requires a different size or socket compatibility. For example, some users need SP3 support for older EPYC 7000 series processors. Others may prefer a 6U footprint or a solution for Intel LGA 4189 sockets. The alternatives in this list were chosen because their specs overlap with the original. They cover various server heights, fan speeds, and socket types. This selection ensures you can compare options based on your exact hardware requirements rather than settling for a single fixed design.
Our top pick: JEVMQIXRM 4U/6U EPYC SP5 Server Cooler.
How these alternatives compare
EDSJTZRSQ SP5 Server CPU Cooler Fan
The EDSJTZRSQ cooler targets 6U server chassis rather than the 4U form factor of the JEVMQIXRM model. It supports the same SP5 socket but uses a fixed 2200 RPM fan speed. This is significantly slower than the 3800 RPM fan found in the original JEVMQIXRM unit. You should choose this option if your server rack has a deeper 6U slot and you prefer lower noise levels over maximum airflow. The slower fan may reduce cooling capacity slightly, but it fits specific chassis constraints that the original model cannot address. It remains a dedicated server solution for SP5 processors.
Dynatron 1U Server LGA 2011 CPU Cooler
The Dynatron R16 is designed for Intel LGA2011 sockets, making it incompatible with the AMD SP5 socket used in the JEVMQIXRM cooler. It features a 1U height profile, which is much shorter than typical server coolers. This unit is built for tight server builds with 150 Watt CPUs. It uses a vapor chamber design for heat transfer. You must pick this alternative only if you are using an Intel processor instead of AMD EPYC. It offers reliable cooling for specific Intel workloads but cannot be used in the same SP5 systems as the original product. The size and socket difference are critical distinctions.
Acogedor SP3 4U Aluminum Server Cooler
The Acogedor cooler supports the older SP3 socket, not the newer SP5 socket found in the JEVMQIXRM model. It is designed for EPYC 7000 series processors in 4U server racks. The build uses aluminum material for the heat sink. This alternative suits users who have older EPYC CPUs and need raw cooling capacity in a data center environment. It prioritizes thermal performance over quiet operation. You should select this option only if your processor is compatible with the SP3 socket. The socket incompatibility is the main difference, as the original model supports the newer SP5 architecture.
SilverStone 4U Active LGA 4189 CPU Cooler
The SilverStone cooler is built for Intel LGA 4189 sockets, so it does not fit AMD SP5 processors. It maintains a 4U size similar to the JEVMQIXRM model but targets high-end Intel servers. The unit weighs 1.92 pounds and measures 3.66 inches wide. It is designed for data centers where durability and airflow are more important than silence. You should choose this alternative if you are building an Intel server workstation. The socket type is the primary difference, as the original JEVMQIXRM cooler is specific to AMD EPYC SP5. Both units serve the 4U form factor but for different processor families.
95mm CPU Cooling Fan for Noctua NH-L9i
The Noctua NH-L9i Chromax Black is a compact cooler for small form factor builds, not a standard 4U server unit. It features a 95mm fan and a black design. The dimensions are 7.87 inches wide and 3.94 inches high. This option suits users who need minimal height in a compact case rather than high airflow in a server rack. It prioritizes a small footprint over maximum cooling performance. You should pick this alternative only if you are building a small form factor system. It is not suitable for SP5 sockets or 4U server racks. The size and use case differ significantly from the original server-focused JEVMQIXRM model.
TKJBHGPK 4U SP5 Server Cooler
The TKJBHGPK cooler is another 4U solution for AMD EPYC SP5 processors, similar to the JEVMQIXRM model. It also features a 3800 RPM fan speed for high airflow. This unit is designed specifically for SP5 sockets in 4U chassis. You should consider this alternative if you want a comparable SP5 solution with identical fan speeds. It serves builders who need high airflow for server workloads. The main difference lies in the brand and specific model variations. Both units target the same socket and form factor, offering similar cooling performance for EPYC processors in 4U server environments.
Quick picks
Our 7 picks
JEVMQIXRM 4U/6U EPYC SP5 Server Cooler
Best for: SP5 socket 4U server racks
- Socket Compatibility
- SP5
- Fan Speed
- 3800 RPM
- System Type
- Server
- Features
- Fan
View on Amazon: JEVMQIXRM 4U/6U EPYC SP5 Server Cooler Affiliate link
This JEVMQIXRM cooler is built for SP5 socket EPYC processors in server racks. It operates at 3800 RPM to move air across the heatsink. The unit fits 4U chassis sizes and supports 6U radiator configurations. You get a dedicated fan for cooling. It is designed for high-airflow server environments rather than standard desktop cases.
Pros
- 3800 RPM fan speed
- SP5 socket compatibility
- 4U form factor design
- Integrated cooling fan
Cons
- Limited to SP5 socket only
- Large 4U size requires rack space
- No variable speed control listed
Good fit if
- You need SP5 socket cooling
- You have a 4U server chassis
- You require high RPM airflow
Skip if
- You use LGA or AM5 desktop sockets
- You have a small form factor case
- You need quiet desktop operation
Verdict: JEVMQIXRM 4U SP5 Server Cooler provides direct SP5 socket cooling with a 3800 RPM fan. It fits 4U server racks and suits users needing high airflow for EPYC processors.
EDSJTZRSQ SP5 Server CPU Cooler Fan
Best for: SP5 sockets in 6U server chassis
- Socket Compatibility
- SP5
- Fan Speed
- 2200RPM
- System Type
- Server
- Features
- Fan
View on Amazon: EDSJTZRSQ SP5 Server CPU Cooler Fan Affiliate link
This 6U server cooler is built for SP5 sockets, supporting AMD EPYC processors. It features a fixed fan speed of 2200 RPM. The unit includes a dedicated fan for airflow. It is designed for server chassis compatibility. You should choose this if you need a direct replacement for SP5 systems. It fits workstations requiring a 6U form factor. The build focuses on standard server cooling needs.
Pros
- Compatible with SP5 sockets
- Includes a cooling fan
- Fixed 2200 RPM fan speed
Cons
- Fixed fan speed lacks variable control
- No PWM or DC speed adjustment mentioned
- Limited to 6U form factor only
Good fit if
- You need a cooler for an SP5 socket
- You require a 6U server form factor
- You prefer a fixed 2200 RPM airflow
Skip if
- You need SP3 socket compatibility
- You require variable fan speed control
- You need a 4U or 1U form factor
Verdict: EDSJTZRSQ 6U SP5 Server Cooler fits SP5 workstations needing a 6U footprint. It suits users who accept a fixed 2200 RPM fan speed for standard server cooling.
Dynatron 1U Server LGA 2011 CPU Cooler
Best for: Intel LGA2011 1U server builds
- Socket Compatibility
- LGA2011
- TDP Rating
- 150 Watts
- System Type
- Server
- Server Height
- 1U
- Features
- Fan
- Dimensions
- 5.4 × 2.1 × 4.7 inches
View on Amazon: Dynatron 1U Server LGA 2011 CPU Cooler Affiliate link
The Dynatron R16 is a 1U server CPU cooler designed for Intel LGA2011 sockets. It supports CPUs up to 150 Watts TDP. The unit uses a vapor chamber base with copper stacked fins. It includes pre-applied Shin-Etsu G751 thermal compound. Its dimensions are 5.4 by 4.7 by 2.1 inches. This compact heatsink suits tight server chassis requiring efficient cooling for Sandy Bridge EP/EX processors.
Pros
- Supports up to 150 Watts TDP
- Vapor chamber base with copper fins
- Pre-applied Shin-Etsu G751 thermal compound
- Compact 1U form factor
Cons
- Limited to LGA2011 socket compatibility
- Max TDP of 150 Watts may be low for high-end CPUs
- Single fan configuration limits airflow options
Good fit if
- You need a 1U cooler for Intel LGA2011
- You run Sandy Bridge EP or EX processors
- You have a tight server chassis
Skip if
- You use AMD EPYC SP5 sockets
- You need support for TDPs above 150 Watts
- You require compatibility with modern Intel sockets
Verdict: The Dynatron R16 1U LGA2011 Server Cooler fits tight server builds using Intel LGA2011 sockets. It provides reliable cooling for 150 Watt CPUs with a vapor chamber design. This unit is not suitable for AMD EPYC or higher TDP requirements.
Acogedor SP3 4U Aluminum Server Cooler
Best for: EPYC 7000 series 4U server racks
- Socket Compatibility
- SP3
- Fan Speed
- 3800 RPM
- System Type
- Server, Workstation
- Material
- Aluminum
- Features
- Fan
- Dimensions
- 4.7 × 3.6 × 5 inches
View on Amazon: Acogedor SP3 4U Aluminum Server Cooler Affiliate link
This Acogedor cooler is built for AMD EPYC 7000 series processors using the SP3 socket. It features aluminum fins and a fan that spins at 3800 RPM. The unit measures 4.7 inches in length, 5 inches in height, and 3.6 inches in width. It is designed for 4U server and workstation systems. You should choose this if you need a dedicated cooling solution for high-density server environments.
Pros
- Compatible with SP3 socket for EPYC 7000 series
- Fan speed reaches 3800 RPM for high airflow
- Constructed with durable aluminum fins
- Specifically designed for 4U server chassis
Cons
- Fan speed is fixed at 3800 RPM with no variable control
- Dimensions are 4.7 x 5 x 3.6 inches, requiring specific clearance
- No mention of PWM control or low-noise settings
Good fit if
- You are building an EPYC 7000 series server
- You need a high-airflow fan for a 4U chassis
- You require a dedicated heatsink for workstation stability
Skip if
- You use an AMD Threadripper or consumer CPU
- You need quiet operation below 3800 RPM
- You are installing in a standard desktop case
Verdict: Acogedor SP3 Server Cooler provides necessary airflow for EPYC 7000 series processors in 4U server racks. It fits your needs if you prioritize raw cooling capacity over quiet operation in a data center environment.
SilverStone 4U Active LGA 4189 CPU Cooler
Best for: Intel LGA 4189 server builds
- Socket Compatibility
- LGA 4189
- Heat Pipes
- 5
- Fan Speed
- 5000 RPM
- System Type
- Server, Workstation
- Color
- Black
- Features
- Fan
View on Amazon: SilverStone 4U Active LGA 4189 CPU Cooler Affiliate link
This SilverStone 4U cooler is built for Intel LGA 4189 sockets in server or workstation builds. It uses five 6mm heat pipes and aluminum fins to move heat efficiently. The dual ball bearing fan runs between 1,500 and 5,000 RPM. It delivers 77.7 CFM of airflow with a noise level of 43 dBA. The unit weighs 1.92 pounds and fits standard 4U chassis spaces.
Pros
- Five 6mm heat pipes for high heat conducting efficiency
- Dual ball bearing fan with PWM control for reliability
- High airflow of 77.7 CFM at maximum speed
- Long mean time to failure of 90,000 hours
Cons
- Maximum noise level of 43 dBA may be loud for quiet environments
- Only compatible with Intel LGA 4189 socket
- Large 4U form factor limits use in smaller cases
Good fit if
- You need a dedicated cooler for an Intel LGA 4189 processor
- You are building a standard 4U server or workstation chassis
- You prioritize high airflow and component longevity over silence
Skip if
- You use an AMD EPYC or Intel consumer socket
- You require a low-noise solution under 40 dBA
- You have a compact case that cannot fit 4U hardware
Verdict: SilverStone 4U LGA 4189 Server Cooler provides robust cooling for high-end Intel servers. It suits data centers and workstations where airflow and durability matter more than silence.
95mm CPU Cooling Fan for Noctua NH-L9i
Best for: Small form factor builds needing minimal height
- Fan Speed
- 2500RPM
- Color
- Black
- Features
- Fan
- Dimensions
- 11.8 × 7.87 × 3.94 inches
- Weight
- 1.76 pounds
View on Amazon: 95mm CPU Cooling Fan for Noctua NH-L9i Affiliate link
This low-profile air cooler measures 95 by 95 by 37 mm. It features a fan that spins at 2500 RPM. The unit weighs 1.76 pounds and includes a black fan shroud. You need this for tight cases where space is limited. It suits builds requiring a small footprint. The 90-day warranty covers defects. Check your email for order details.
Pros
- Compact 95 by 95 by 37 mm dimensions
- High 2500 RPM fan speed
- Black Chromax color scheme
- 1.76 pounds weight
Cons
- Very low 37 mm height limits compatibility
- Short 90-day warranty period
- 95 mm fan size may restrict airflow
Good fit if
- You need a low-profile cooler under 40 mm
- You want a black aesthetic for your build
- You require a lightweight heatsink under 2 pounds
Skip if
- You need high airflow for heavy workloads
- You require a warranty longer than 90 days
- You have a case that cannot fit 37 mm height
Verdict: Noctua NH-L9i Chromax Black 95mm Cooler fits small form factor builds needing minimal height. It suits users prioritizing a compact black design over maximum cooling performance.
TKJBHGPK 4U SP5 Server Cooler
Best for: AMD EPYC SP5 4U server builds
- Socket Compatibility
- SP5
- Fan Speed
- 3800 RPM
- System Type
- Server
- Features
- Fan
View on Amazon: TKJBHGPK 4U SP5 Server Cooler Affiliate link
This 4U server cooler is built for AMD EPYC SP5 sockets. It includes a cooling fan rated for 3800 RPM. The design targets high airflow needs in server environments. You get a dedicated heat sink and fan assembly. It fits standard 4U chassis layouts. This unit is a direct alternative for SP5 systems requiring robust thermal management.
Pros
- Compatible with AMD EPYC SP5 sockets
- High fan speed of 3800 RPM
- Designed specifically for 4U server form factors
- Includes integrated cooling fan
Cons
- Limited to 4U chassis size
- Only one fan speed option listed (3800 RPM)
- No variable speed control mentioned
Good fit if
- You are building an AMD EPYC SP5 server
- You need a 4U compatible cooling solution
- You require high static pressure airflow
Skip if
- You use an Intel or older AMD socket
- You need a 1U or 2U low-profile cooler
- You require silent operation under 3800 RPM
Verdict: TKJBHGPK 4U SP5 Server Cooler 3800 RPM is a specialized cooling solution for AMD EPYC SP5 processors in 4U chassis. It suits builders who need high airflow and socket-specific compatibility for server workloads.
Specifications side by side
| Spec | JEVMQIXRM 4U/6U EPYC SP5 Server Cooler | EDSJTZRSQ SP5 Server CPU Cooler Fan | Dynatron 1U Server LGA 2011 CPU Cooler | Acogedor SP3 4U Aluminum Server Cooler | SilverStone 4U Active LGA 4189 CPU Cooler | 95mm CPU Cooling Fan for Noctua NH-L9i | TKJBHGPK 4U SP5 Server Cooler |
|---|---|---|---|---|---|---|---|
| Socket Compatibility | SP5 | SP5 | LGA2011 | SP3 | LGA 4189 | not stated | SP5 |
| Heat Pipes | not stated | not stated | not stated | not stated | 5 | not stated | not stated |
| TDP Rating | not stated | not stated | 150 Watts | not stated | not stated | not stated | not stated |
| Fan Speed | 3800 RPM | 2200RPM | not stated | 3800 RPM | 5000 RPM | 2500RPM | 3800 RPM |
| System Type | Server | Server | Server | Server, Workstation | Server, Workstation | not stated | Server |
| Color | 4U-3800RPM | 6U-G-2200RPM | not stated | not stated | Black | Black | 3800RPM |
| Server Height | not stated | not stated | 1U | not stated | not stated | not stated | not stated |
| Material | not stated | not stated | not stated | Aluminum | not stated | not stated | not stated |
| Features | Fan | Fan | Fan | Fan | Fan | Fan | Fan |
| Dimensions | not stated | not stated | 5.4 × 2.1 × 4.7 inches | 4.7 × 3.6 × 5 inches | 4.45 × 3.66 × 4.96 inches | 11.8 × 7.87 × 3.94 inches | not stated |
| Weight | not stated | not stated | 13.8 ounces | not stated | 1.92 pounds | 1.76 pounds | not stated |
| Size | One Size | One Size | not stated | not stated | 4U | not stated | One Size |
| Model | JEVMQIXRM | EDSJTZRSQ | R16 | Thincolczkmth432f1035 | SST-XE04-4189B | ABL-FS-NH-L9i-CHBK | TKJBHGPK |
Looking beyond this list? See webcab server case 4u alternatives.
Frequently asked questions
Is the JEVMQIXRM cooler compatible with AMD EPYC SP5 sockets?
Yes, the JEVMQIXRM 4U/6U EPYC SP5 Server Cooler is designed specifically for SP5 sockets. It provides direct cooling for these processors and fits into 4U server racks. The unit includes a fan that runs at 3800 RPM, which delivers high airflow suitable for demanding EPYC workloads.
What is the difference between the JEVMQIXRM and EDSJTZRSQ coolers?
The JEVMQIXRM model is built for 4U server racks and features a 3800 RPM fan. The EDSJTZRSQ alternative is designed for larger 6U server chassis and uses a fixed 2200 RPM fan. Both support SP5 sockets, but the EDSJTZRSQ operates at a significantly lower fan speed.
Does the Dynatron cooler support AMD EPYC processors?
No, the Dynatron 1U Server LGA 2011 CPU Cooler is not suitable for AMD EPYC. It is designed for Intel LGA2011 sockets and 1U server builds. The cooler provides reliable cooling for 150 Watt CPUs but lacks the compatibility needed for SP5 or other AMD server sockets.
Which cooler is best for EPYC 7000 series SP3 sockets?
The Acogedor SP3 4U Aluminum Server Cooler is the best choice for EPYC 7000 series processors. It explicitly supports Socket SP3 and fits into 4U server racks. This unit prioritizes raw cooling capacity over quiet operation, making it ideal for data center environments handling these specific processors.
Can I use a server cooler on an Intel LGA 4189 socket?
Yes, the SilverStone 4U Active LGA 4189 CPU Cooler is built for this socket. It provides robust cooling for high-end Intel servers and fits standard 4U chassis. This cooler is suitable for data centers and workstations where durability and airflow are more important than silent operation.
Is the TKJBHGPK cooler suitable for AMD EPYC SP5 in 4U racks?
Yes, the TKJBHGPK 4U SP5 Server Cooler is a specialized solution for AMD EPYC SP5 processors. It fits 4U chassis and includes a fan running at 3800 RPM. This high airflow makes it a strong option for builders who need socket-specific compatibility for heavy server workloads.
Are there any small form factor alternatives in this list?
The 95mm CPU Cooling Fan for Noctua NH-L9i is the only option suited for small form factor builds. It features a compact black design with minimal height requirements. This cooler prioritizes a small footprint over maximum cooling performance, making it distinct from the larger server-oriented units.